Neptune Magnetic Probe Rack The Neptune Magnetic Probe Rack helps keep your controllers probes organized and neat while allowing you to place it virtually anywhere. Now you don't have to have your systems probes dangling in the sump or aquarium looking unsightly or in a position to get broken! Neptune Magnetic Probe Rack Features Organize up to four probes. One position is large enough to accommodate an Apex AquaController temperature probe Attaches magnetically to aquariums and sumps with glass or acrylic thicknesses of up to 0.5" All acrylic construction - safe for virtually any aquatic environment.
Neptune Apex Temperature Probe Temperature precision is 0.1dFHigh quality probe w/ 6' cable.Encapsulated thermistor 2.5mmProfessional probes tend to be more precise, and last longer than Standard probes.Desgined to work with all Neptune Apex Aquarium Controllers
Neptune pH Probe Neptune now offers both the pH and ORP probes in a double-junction construction for the Apex controller - these probes are built so they hold calibration longer and have a longer lifespan than single-junction probes. Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into the electrolyte which changes the accuracy of the probe and requires more frequent calibrations.Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.These probes will not only work with your Netpune Apex but virtually any other controller or monitor that uses BNC connections.
Neptune Conductivity Probe Reads the Salinity in your saltwater aquarium.Dual Range: 0 to 999 us/cm or 0 to 99.9 ms/cmLab quality probe w/10' cableMinidin 4 Connector
Neptune ORP Probe Neptune now offers both the ORP and pH probes in a double-junction construction for the Apex controller - these probes are built so they hold calibration longer and have a longer lifespan than single-junction probes. Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into the electrolyte which changes the accuracy of the probe and requires more frequent calibrations.Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.These probes will not only work with your Netpune Apex but virtually any other controller or monitor that uses BNC connections.
AutoAqua Smart Stir A magnetic stirrer for mixing water test reagents efficiently and effortlessly Test the Smart Way with the AutoAqua Smart Stir Water testing is critical and necessary for aquariums. However, it is annoying and time-consuming to mix different test kits one by one.Smart Stir is a small but clever labor and time-saving gadget to help you mix water test reagents with ease. Its strong motor and tiny magnetic stirring bar allow you to mix liquids completely and effortlessly in a moment.Just drop the magnetic stirring bar in the container, put it on the stir base, and press the power button, Smart Stir will do the annoying labor for you especially when you have to do several tests. It will stop automatically after five minutes in case you forget to turn it off. Make water testing easier, faster, and more effective! AutoAqua Smart Stir Features Compact and Compatible - Smart Stir's compact design not only saves space but is compatible with standard vials whose diameter is under 2.7 cm found in most water test kits. Sustainable and Energy-Saving - Instead of replacing batteries, Smart Stir has a built-in rechargeable lithium battery which reduces the waste and cost of batteries. It will be turned off automatically after five minutes of operation to save power. The low battery indicator reminds users to charge it in time to get the best performance. Elegant & Thoughtful - Smart Stir comes with not only an attractive and streamlined look but a thoughtful design. Its holder makes sure the vial stands firmly and the non-slip rubber pads on the bottom dampen vibrations during stirring. AutoAqua Smart Stir Specifications Model: SS-100 Charging: USB 5V Charging Time: 120 minutes Dimensions: 2.77 x 2.77 x 2.34 inch (70.5 x 70.5 x 59.5 mm) Holder Size: 27 mm in Diameter 1 Year manufacturers limited warranty What's Included with your new AutoAqua Smart Stir Smart Stir Base Micro USB Charging Cable Iron Wire Magnetic Stir Bar
Monitoring Salinity in an Aquarium can be a ChallengeGet Reliable and Consistent Readings with the SPS KitOne of the biggest challenges with conductivity probes is getting a consistent reading. Many times, the reading is fouled by small bubbles or debris getting on to the probes and end. The SPS Salinity Probe Stability Kit Solves the Problem.The SPS is easy to use! Simply slip the SPS kit over the end of your probe, connect the 1/4in supply line to a small pump such as a Neptune Pmup, or SICCE 90 GPH Micra, or even an open port on your manifold. For the best results, supply the SPS kit between 60 to 100 GPH of consistent and constant flow.The SPS Kit is carefully designed to create just the right amount of water movement and constant pressure around the probe to provide a solid and reliable reading. It will also shielding the probe from bubbles and other debris. If a bubble does get in, the SPS kits constant flow over the probe will act to flush it out and help the reading recover quickly.Basic Installation While supporting the Pressure Screen (B), carefully insert the end of the probe (F) through the top of the SPS Kit Housing (A). Gently push the probe in until it stops against the Pressure Screen. Connect the 1/4in supply line (E) to the push fitting (D) Connect the end of the supply line to the flow source Initial Set-up Place the Probe with the SPS Kit installed into the water and turn on the flow source First - Gently shake the assembly up and down to dislodge any air bubbles that may be trapped inside. Next - Cover the opening at the bottom of the SPS Kit with your finger for a few seconds to expel any reaming air or bubble that may be trapped. The settle in period will generally last a few minutes to as much as an hour. Once settled in, your reading will level out and you should see a steady trend line.
Neptune Oxyguard Probe with Cable 0 to 19.9 ppmLab quality probe w/10' cableTemperature, Altitude, and Salinity CompensationMinidin 6 ConnectorNote: The Oxyguard membrane will need to be replaced every 3 months at which time it should be calibrated. You will need both the Adapter and the Calibration Kit in order to accomplish this.
