Abyzz A100-2M DC Water Pump The innovative Abyzz A100-2M-90V/240V includes all the quality and features of the bigger Abyzz pumps in a very compact and powerful package.Featuring laser welded a titanium encased Neodymium rotor, powerful and programmable menu-controlled electronic driver, and a sinusoidal three-phase synchronous motor, the A100 is in a class of it's own in terms of size and performance.The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps.The menu controlled driver and motor run on an mere 12V and because of that it can be used in a myriad of applications. The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special Tungsten carbide shaft, this feature provides for low-maintenance operations.The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards.This product was developed and is manufactured in Germany by Venotec. Features of Abyzz Pumps Variable speed range (0 - 100%) MCFS (Menu Controlled Flow Sequencer) for random, wave etc. BOOSTMODE integrated Comprehensive safety functions (e.g. dry run, temperature sensor, and overload protection) Soft start-up Bus-enabled interface for peripheral devices Lockable plug contacts Low-noise operation Operating Voltage: 12V Removable motor stand Abyzz A100-2M Specifications BOOSTMODE max flow rate: 2,200 gph / 8,500 lph Normal mode max flow rate: 1,880 gph / 7,300 lph Delivery height: max. 19.5 ft / 6.0 meters Rated input : 5-100W Input voltage: 90V-240V~ @ 50-60Hz Operating Voltage: 12V Ambient temperature: 35.6dF - 104dF +2dC...+40dC Maximum operating pressure: 17.4 PSI / 1,2 bar Maximum immersion depth: 6.5 ft / 2 meters Pump cable length: 6.5 ft/ 2m Inlet/outlet connections: 40mm/25mm (suitable for PVC/AVB adhesive fittings) These pumps are special order and take approximately 7 business days to arrive to our store
Abyzz A200-3M DC Water Pump The innovative Abyzz A200 pump with its titanium impeller consists of powerful and programmable menu-controlled electronic driver and a sinusoidal three-phase synchronous motor (pump).The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps.The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations.The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards.This product was developed and is manufactured in Germany by Venotec. Features of Abyzz Pumps Variable speed range (0 - 100%) MCFS (Menu Controlled Flow Sequencer) for random, wave etc. BOOSTMODE integrated Comprehensive safety functions (e.g. dry run, temperature sensor, and overload protection) Soft start-up Bus-enabled interface for peripheral devices Lockable plug contacts Low-noise operation Operating Voltage: 200V Abyzz A200-3M Specifications BOOSTMODE max flow rate: 4,400 gph / 17,000 lph Normal mode max flow rate: 3,850 gph / 14,500 lph Discharge Flow Speed: max 5.4m/s, nominal 4.6m/s Delivery height: max. 28.6 ft / 8.8 meters Rated input : 4W-400W Input voltage: 110V~ @ 60Hz Operating Voltage: 200V Ambient temperature: 35.5dF - 104dF +2dC...+40dC Maximum operating pressure: 21.75 PSI / 1,5 bar Maximum immersion depth: 6.5 ft / 2 meters Pump cable length: 9.75 ft/ 3m Inlet/outlet connections: 50mm/40mm (suitable for PVC/AVB adhesive fittings) These pumps are special order and take approximately 7 business days to arrive to our store
Abyzz A400-3M DC Water Pump The innovative Abyzz A400 pump with its titanium impeller consists of powerful and programmable menu-controlled electronic driver and a sinusoidal three-phase synchronous motor (pump).The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps.The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations.The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards.This product was developed and is manufactured in Germany by Venotec. Features of Abyzz Pumps Variable speed range (0 - 100%) MCFS (Menu Controlled Flow Sequencer) for random, wave etc. BOOSTMODE integrated Comprehensive safety functions (e.g. dry run, temperature sensor, and overload protection) Soft start-up Bus-enabled interface for peripheral devices Lockable plug contacts Low-noise operation Operating Voltage: 200V Removable motor stand Abyzz A400-3M Specifications BOOSTMODE max flow rate: 6,075 gph / 23,000 lph Normal mode max flow rate: 4,800 gph / 18,600 lph Discharge Flow Speed: max 7.5m/s, nominal 6.4m/s Delivery height: max. 42.25 ft / 13 meters Rated input : 4W-400W Input voltage: 240V~ Operating Voltage: 200V Ambient temperature: 35.5dF - 104dF +2dC...+40dC Maximum operating pressure: 17.4 PSI / 1,2 bar Maximum immersion depth: 6.5 ft / 2 meters Pump cable length: 9.75 ft/ 3m Inlet/outlet connections: 50mm/40mm (suitable for PVC/AVB adhesive fittings) These pumps are special order and take approximately 7 business days to arrive to our store
