Tank Safety

Ammonia Alert is an innovative color device for continuously detecting and monitoring toxic free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed. The device detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. It lasts over a year and replacement sensors are available. Marine or freshwater use.In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water, chemicals, or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia.

Read more less

XP Aqua Flood Guardian Tired of flooding your kitchen, garage or bathroom? The RO/DI Flood Guardian can be a real marriage saver and will help prevent accidental floods from ever happening again! What is the Flood Guardian from XP Aqua? Prevent floods by adding the super-easy-to-install Flood Guardian to your RO or RO/DI System.Never worry about forgetting to turn off your RO/DI system or overfilling your reservoir again! Simply mount the magnetically-mounted sensor to any reservoir/bucket/jug and the water will stop once the reservoir is filled.No drilling is required and there is no unreliable float valve to fail. Our proprietary dual-optical sensor provides unparalleled security. Additionally, there is no frustrating pressure solenoid to install: the electronic solenoid kit installs in seconds. Optionally, use the RO/DI Flood Guardian with a 7-day timer to automatically refill your ATO reservoir. Simply program the timer to turn on once every 1-7 days and the system will refill your reservoir based on your timer settings. No more TDS Creep! XP Aqua Flood Guardian Features World's first and only electronic float valve kit Prevents unwanted floods when making RO or RO/DI water Installs & uninstalls in seconds Magnetic-mount sensor – no drilling needed Dual-Optical Sensor for extra security Easily moves from one reservoir to another (brute, jug, bucket, tank, etc…) Safe, low 12V voltage Works in complete darkness Specifications of the Flood Guardian Power Input: 100-240VAC 50-60Hz Solenoid Valve Power Consumption: 6W@12V Max glass mounting thickness: 1/2" (12.7mm)

Read more less

Full arm length measuring 28". Made from high quality PVC material. Ideal for handling live rock, coral, and anemones. Safe and sanitary. No more allergic reactions! Helps to prevent contamination while working in the aquarium.

Read more less

pH Alert is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously.A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.6.Freshwater Only.

Read more less

Our ground probe gives you a firm electrical ground for your aquatic system.When properly installed, "stray voltage" which is generated by pumps, heater, lights and other electrical devices used by aquariums will be carried away.Features Eliminates Stray Voltage Saltwater Safe Rust Resistant Easy to Install Keep Aquatic Animals Safe

Read more less

This battery backup powers the EcoTech Marine VorTech Propeller Pump for up to 30-hours during a power outage emergency.Specifications: For use with EcoTech Marine VorTech pump. Provides Backup power for 30 or more hours on a VorTech Pump. Two Battery Backups can be connected for double run time. Includes trickle charger for increased battery life. Includes all cables. Dimensions (L x W x H): 9"" x 7"" x 3.25"

Read more less

In the event of a power outage, is your tank protected?When it comes to a power failure, it's not a matter of if, but when. Fish and corals can perish in as little as 4 hours without water flow. The IceCap Battery Backup Version 3.0 will keep your flow pump running uninterrupted in the event of a power loss for ~35 hours*. You can connect two pumps to the battery backup and run them simultaneously for ~17 hours after the power goes out. To double your backup run time, you can even connect two battery backups together for further protection.Features & Highlights New model updated for 2021! This new version is 12V like the original! Turns on immediately after a power failure to protect your aquarium Keeps a single flow pump running ~35 hours after a power loss You can connect 2 flow pumps to a single battery backup for ~17 hours of backup operation You can connect two battery backups together to double the run time of a single pump to ~70 hours Compact and attractive form factor that is easy to mount on a wall or aquarium stand Get started immediately: power supply, pump adapters, and user guide are all included in the box Compatible with most 12 volt pumps from brands like Maxspect, IceCap, and Reef Octopus. * On average 50w at 30% power single pump/single power cell.Which Pump Brands Can I Connect to the IceCap Battery Backup v3.0? /strong>One of the biggest benefits of the IceCap Battery Backup over competing brands is that it isn't restricted to a single brand of pump. The new battery backup v3.0 is compatible with most 12-24V or less variable speed DC pumps on the market today.Some examples include: Maxspect Gyre Pumps (All Models) IceCap Gyre Pumps (All Models) Reef Octopus Octo Pulse Pumps (All Models) Reef Octopus VarioS Pumps (VarioS-2 and VarioS-4) Battery Backup Best Practices for Operation & MaintenanceThe IceCap Battery Backup v3.0 should be kept in an environment with a temperature of approximately 70d F for optimal operation. The life of the battery will depend on the number of discharges that the unit has cycled through. Every time the unit cycles, the life of the battery and its capacity are reduced.Specifications DC Charger: Input: 100V to 240V 50/60Hz | Output: 27V 600MA Main Unit DC: Output: 12V x 2.5A max | Input: 27V 1A max Fuse: 250V 10A 5x20mm fast blow Size: 5.75in x 5in x 3.125in (WxLxH) Weight: 3.85lbs IMPORTANT: NOT compatible with Reef Octopus VarioS Pumps, EcoTech pumps, Tunze, or AI Nero pumps.

Read more less

Neptune Apex FMM Solid Surface Leak Probe Plug this probe into your FMM and then place it on any surface where you want to detect stray water.Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.Time is so critical when it comes to water on the floor so it is very common to place two of these inside the stand and two outside the stand to have the ultimate protection against a leaky aquarium.Note: The LD-2 will only work with the FMM and cannot be used with the ALD module.

Read more less

Neptune Apex Optical Multi-Surface Leak Sensor New to the leak detector offerings for your Neptune Apex is the Optical Multi Surface Leak Sensor (LD-3). This is a weighted sensor that is an improved sensor and design over our Solid-Surface Leak Sensor (LD-2). Neptune LD-3 Optical Leak Sensor Improvements An epoxied design that prevents water incursion into the sensor circuitry. This allows the sensor to be utilized over and over despite how often it becomes activated and wet. Utilizing an optical sensor allows the sensor to be placed on any surface including metal and epoxied cement floors without a false activation. This LD-3 Leak Sensor requires an open FMM module port in order to work with your Apex aquarium controller.

Read more less

Neptune Apex FMM Under Carpet Leak Probe Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. The LD-1 will only work with the FMM and cannot be used with the ALD module.

Read more less

AutoAqua Smart AWC Duo G2 - Auto Water Changer + ATO Making Water Changes Simple and Smart The AWC G2 is a Dual function Auto Water Changer and Auto Top Off (AWC/ATO) touch screen controller that automates water changes and replenishes evaporated water with ease. Simple to install and includes everything needed to operate the AWC with ATO function. Smart AWC Duo's two patented optical dual sensors and a touch screen can perform a water change and water top off with ease. A New Experience The intuitive touch screen interface saves you from complicated settings and allows you to complete multiple tasks effortlessly. You can use the Smart AWC Duo G2 with saltwater or freshwater applications and on aquariums of all sizes. This smart device makes water changes effortless. Precise Detection with Double the Protection The Smart AWC Duo G2 has two patented optical dual sensors, so if the primary sensor is defective, the failsafe sensor will take over and prevent over filling or over-drain water from the aquarium. The easy-to-install magnetic dual optical sensors can detectthe water level precisely and ensure an accurate water change and filling volume Integrated with Safety Technology The unique Quick Security Technology (QST) protects the aquarium by spotting potential failure situations to prevent any disaster. The built-in audible alarm will alert you within seconds of an accident. Features of the AutoAqua Smart Automatic Water Changer Duo G2 Dual Function Auto Water Change/Auto Top Off Easy Touch Screen Controller Display Simple User Interface Quick Security Technology Optical Level Sensors with Magnet Mounts Everything is Included! Auto Aqua Smart Automatic Water Changer Duo G2 Specifications Power Power Input: 100-240 VAC 50-60 Hz Power: 4.5 W @ DC 12 V Power Cord Length: 6 ft (180 cm) DC Pump Head: 8.2 ft (250 cm) Flow Rate: 74 gph (280 lph) Pump Cord Length: 6 ft (180 cm) Max. Mounting Thickness Sensor: 1/2 inch (12.7 mm) Universal Tube Holder: 1/2 inch (12.7 mm) Water Change Interval Minimum: 1 hour - Maximum: 99 days Length of Cable Between Sensor and Controller: 10 ft (300 cm) Flexible Tubing: 6 m (ID: 6.5 mm / OD: 9.0 mm) Precautions Please use the product's own power adapter and work in the specified working environment. This product only supports 2.4G Wi-Fi, not 5G Wi-Fi. Perform flow calibration before using the device to ensure that the water output is the same as the water input when changing water. The connecting pipe for the liquid inlet should be as short as possible, and the connecting pipe for the liquid outlet should be suspended above the tank. Please carefully check whether the connection direction of the water inlet and outlet is correct, and do not connect them in reverse. What's Included with your new AutoAqua Smart Automatic Water Changer Duo G2 Smart AWC Duo G2 Controller x1 Power Adapter x1 DC Refill Pump x3 Universal Tube Holder x3 Siphon Break x3 Tubing 19.6 ft (600 cm) x1

Read more less