Regulators & Packages

Dual Gauge CO2 Regulator & Solenoid/Needle Valve Overview Save when you purchase two or more accessories at the same time!p> High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection. Needle Valve CO2 Regulators This is definitely not one of those cheap needle valves that will not allow you to have the precision needed for adjusting your CO2! A high precision, stainless steel needle value suitable for virtually any application where precise control of CO2 introduction into your ecosystem is required. Our Needle valves have a 1/8" MPT connection so an adapter fitting may be required to fit your application. Solenoid Valve CO2 Regulator A valuable accessory for any calcium reactor. Attaches inline on the reactor CO2 assembly and plugs into wall. When the power goes off the solenoid shuts down not allowing CO2 to flood your reactor. This prevents a major pH swing (due to the very low pH in the reactor with so much CO2 present) from happening when power is restored. Ideal for use with pH Controllers on freshwater planted systems, and marine systems using calcium reactors, etc. Each solenoid is supplied with a 1.5m cord.

Read more less

CarbonDoser Electronic CO2 Regulator Overview This product has forever changed the introduction of CO2 into an aquarium. Key Features Used for CO2 injection for a freshwater planted aquarium, or a Calcium reactor in a saltwater application. We guarantee that nowhere on this planet can you find a BETTER or MORE PRECISE regulator! This is OUR baby, we built it, tested it, and patented it. The problem of "dumping" is completely eliminated with this regulator. Dumping is always a problem with ALL OTHER regulators which utilize a needle valve. Simply because, a needle valve relies on the pressure on both sides of it for it's accuracy. So, even though you have it set at a certain "bubble rate", once the pressure in the cylinder (or the outside atmospheric pressure) changes, so will the amount of CO2 that passes through the needle valve. This is why it is physically impossible for any and ALL other regulators that rely on a needle valve to ever be consistent. Our regulator does not have a needle valve, but instead, it has an electronic valve that opens and closes in a fraction of a second, (each "opening and closing" equates to a bubble) and, due to the fact that it is "electronic" the "bubble rate" can NEVER change. Once it is set, it can never vary more than +/- 1/1,000=of a second. The low pressure gauge goes up to 45 lbs but it can be measured up to 60 lbs. Also included with CarbonDoser Free upgrade to John Guest push-in fitting CarbonDoser exclusive check valve Polyurethane tubing

Read more less

CO2 Cylinder/CO2 Regulator/Valve & Solenoid Package - 5lb Overview Save when you purchase two or more accessories at the same time! Aluminum CO2 Cylinder 5 Pound Aluminum CO2 Cylinder Specificaitons (5lb) All aluminum CO2 cylinder. CGA320 valve connection. Dimensions 5lb Aluminum CO2 Cylinder 18" high 5.5" diameter Please note: CO2 cylinders are shipped empty. Dual Gauge CO2 Regulator High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection. Needle Valve CO2 Regulators This is definitely not one of those cheap needle valves that will not allow you to have the precision needed for adjusting your CO2! A high precision, stainless steel needle value suitable for virtually any application where precise control of CO2 introduction into your ecosystem is required. Our Needle valves have a 1/8" MPT connection so an adapter fitting may be required to fit your application. Solenoid Valve CO2 Regulator A valuable accessory for any calcium reactor. Attaches inline on the reactor CO2 assembly and plugs into wall. When the power goes off the solenoid shuts down not allowing CO2 to flood your reactor. This prevents a major pH swing (due to the very low pH in the reactor with so much CO2 present) from happening when power is restored. Ideal for use with pH Controllers on freshwater planted systems, and marine systems using calcium reactors, etc. Each solenoid is supplied with a 1.5m cord.

Read more less

CO2 Cylinder/CO2 Regulator/Valve & Solenoid Package - 10lb Overview Save when you purchase two or more accessories at the same time! Aluminum CO2 Cylinder 10 Pound Aluminum CO2 Cylinder Specificaitons (10lb) All aluminum CO2 cylinder. CGA320 valve connection. Dimensions 10lb Aluminum CO2 Cylinder 20" high 7" diameter Please note: CO2 cylinders are shipped empty. Dual Gauge CO2 Regulator High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection. Needle Valve CO2 Regulators This is definitely not one of those cheap needle valves that will not allow you to have the precision needed for adjusting your CO2! A high precision, stainless steel needle value suitable for virtually any application where precise control of CO2 introduction into your ecosystem is required. Our Needle valves have a 1/8" MPT connection so an adapter fitting may be required to fit your application. Solenoid Valve CO2 Regulator A valuable accessory for any calcium reactor. Attaches inline on the reactor CO2 assembly and plugs into wall. When the power goes off the solenoid shuts down not allowing CO2 to flood your reactor. This prevents a major pH swing (due to the very low pH in the reactor with so much CO2 present) from happening when power is restored. Ideal for use with pH Controllers on freshwater planted systems, and marine systems using calcium reactors, etc. Each solenoid is supplied with a 1.5m cord.

Read more less

Reef Crest CO2 Regulator with Solenoid and Bubble Counter Overview The Reef Crest CO2 regulator comes complete with two pressure gauges for a standard refillable cylinder. This CO2 Regulator set-up has been specially designed for aquariums, and is ideal for planted aquariums or saltwater set-ups that require CO2 injection (like a calcium reactor). The supplied regulator comes with one high pressure gauge to read the cylinder pressure and one low pressure gauge to measure the CO2 output going into your aquarium. It also includes a removable bubble counter with built-in check valve as well as a needle valve that allows for the fine adjustment of CO2 going into the aquarium. In addition, it is also equipped with a built-in solenoid valve, that allows for easy connection to pH or other aquarium controllers. Features Stainless steel construction CGA320 connection Outlet Pressure range: 0.3 - 05MPa Operating Pressure: 1000 PSI 110v Solenoid with an IP65 rating included 6mm (1/4") tubing outlet

Read more less

CO2 Cylinder/ CO2 Regulator & Needle Valve Package - 10lb Overview Save when you purchase two or more accessories at the same time! Aluminum CO2 Cylinder 10 Pound Aluminum CO2 Cylinder Specificaitons (10lb) All aluminum CO2 cylinder. CGA320 valve connection. Dimensions 10lb Aluminum CO2 Cylinder 20" high 7" diameter Please note: CO2 cylinders are shipped empty. Dual Gauge CO2 Regulator High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection. Needle Valve CO2 Regulators This is definitely not one of those cheap needle valves that will not allow you to have the precision needed for adjusting your CO2! A high precision, stainless steel needle value suitable for virtually any application where precise control of CO2 introduction into your ecosystem is required. Our Needle valves have a 1/8" MPT connection so an adapter fitting may be required to fit your application.

Read more less

Pinpoint CO2 Regulator Kit Overview The Pinpoint CO2 Regulator Kit is a high end regulator/solenoid engineered specifically for the aquarium hobby at an affordable price. This is an excellent regulator/solenoid for any hobbyist who is automating a calcium reactor or setting up a freshwater planted aquarium. Very quiet reliable non-stick operation precise needle valve to dispense exactly the flow desired. The PINPOINT CO2 Regulator Solenoid is the Cadillac of regulators. Features Fits standard or paintball CO2 bottles (adapter included) Gauge shows remaining bottle volume/pressure Output pressure set to 40 psi ± 3 LED indicator for energized solenoid Precision adjustable micro control valve 120 VAC (230 VAC adapters available) 12-month industry-leading warranty What's Included Electronic non-stick solenoid Glass bubble counter 20 ft silicone tubing Adjustment screwdriver

Read more less

CO2 Cylinder/CO2 Regulator & Needle Valve Package - 5lb Overview Save when you purchase two or more accessories at the same time! Aluminum CO2 Cylinder 5 Pound Aluminum CO2 Cylinder Specificaitons (5lb) All aluminum CO2 cylinder. CGA320 valve connection. Dimensions 5lb Aluminum CO2 Cylinder 18" high 5.5" diameter Please note: CO2 cylinders are shipped empty. Dual Gauge CO2 Regulator High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection. Needle Valve CO2 Regulators This is definitely not one of those cheap needle valves that will not allow you to have the precision needed for adjusting your CO2! A high precision, stainless steel needle value suitable for virtually any application where precise control of CO2 introduction into your ecosystem is required. Our Needle valves have a 1/8" MPT connection so an adapter fitting may be required to fit your application.

Read more less

Dual Gauge CO2 Regulator Overview High quality regulator the will work with any CO2 system. Ideal for calcium reactors and CO2 systems for planted tanks. CGA320 connection.

Read more less