Extend to your HYDROS Rope Leak Sense Port Accessory for those larger areas you want to protect.The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total disaster.Does NOT include an adapter to connect to the HYDROS Control.
Mount your Neptune APEX display in style. with this new APEX Display Holder.The simple installation features a mounting slot for super easy mounting and aligning. This kit includes the mount and a mounting screw.Dimensions: 1.625" x 3.5" x 3"
The Seneye web server with WiFi module removes the need for a pc altogether and allows wireless connection from your Seneye device to your router / modem.The Seneye web server will upload the data from your Seneye home, reef, or pond device without the need for a pc in the house.You will then be able to view all your readings from a computer (pc/mac), tablet or smart phone from anywhere in the world via the Seneye cloud.
Hydros Flow Sensor - 1 Inch The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app.Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) Monitor Water Flow with the Hydros Flow Sensor The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it.It is safe for use in freshwater and saltwater aquarium systems. The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet. Four Sizes of the Hydros Flow Sensor are Available 3/4" Flow Sensor: Flow Range of 40- 800GPH 1" Flow Sensor: Flow Range of 50-1500GPH 1.5" Flow Sensor: Flow Range of 100-2500GPH 2" Flow Sensor: Flow Range of 200-4050GPH All flow sensors come with schedule 80 PVC Unions, and have an 8' wire length to plug into your Hydros Sense Port.While no power supply is needed, a Hydros Control with an available Sense Port is required for operation.
The HYDROS DC CO2 Solenoid Valve is the ideal solution for controlling the CO2 flow on a calcium reactor or regulating CO2 injection into a freshwater planted tank. It's a useful multi-purpose accessory you can use anywhere you need on/off oxygen or carbon dioxide.The HYDROS DC CO2 Solenoid Valve is electronically controlled and plugs into a Drive Port on the Control 2 and Control 4 where it can be monitored and controlled via the HYDROS app. There is no separate power supply required for a clean and simple installation.You can use the HYDROS Control 2 and Control 4 to monitor and control pH. For example, in a reef aquarium, you can use either controller along with a pH probe to measure the pH in a calcium reactor. You'll be able to control the on/off state of the CO2 solenoid attached to the regulator with the HYDROS app. You can configure your controller to automatically turn the solenoid valve on at high pH or close the solenoid valve at low pH to effectively dissolve your calcium reactor media and replenish calcium and other elements in your aquarium water.The HYDROS DC CO2 Solenoid Valve is an Official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of aquarium automation systems in the hobby today. CoralVue has thoroughly tested the CO2 Solenoid Valve to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the solenoid so it connects with a Drive Port on the controller using an aviation-style plug for safer operation. No additional power source is needed to run the solenoid.
Hydros Rope Leak Sensor Mounting Clips Easily and securely mount the flexible HYDROS Rope Leak Detection Sensor to most surfaces to better sense the presence of moisture anywhere along the rope. Includes 10 Mounting ClipsDoes NOT include Rope Leak Sensor or its adapter to connect to the HYDROS Control.
Hydros Sole The HYDROS Sole is an aquarium controller hybrid with a heavy-duty liquid dosing pump designed for continuous dosing tasks in saltwater and freshwater aquariums. It can be used independently or with other HYDROS devices. About the Hydros Sole Aquarium Doser The HYDROS Sole is an aquarium controller hybrid with a heavy-duty liquid dosing pump designed for continuous dosing applications like controlling effluent in a calcium reactor, kalkwasser additions, dosing liquid foods, feeding a sulfur reactor, and performing water changes. The controller is suitable for both saltwater and freshwater aquariums and can be used independently or in conjunction with other HYDROS devices. The Sole can send alerts and notifications, and when used with a HYDROS XP8 or WiFi Power Strip, it can also control outlets for lights, pumps, feeders, and other aquarium accessories. The Hydros Control XD is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. The Control XD features an IP-65 Rated -Splash Proof, Dust Proof, and Secure Connection HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Command Bus - 2 AvailableThe Command bus communicates with other HYDROS devices for the ultimate failsafe and can also power other Control devices. Continuous Duty Liquid DoserThe HYDROS Sole features one (1) continuous-duty liquid dosing pump that is capable of controlling effluent in calcium or kalkwasser reactors, dosing liquid foods, feeding a sulfur reactor, and performing water changes. The Hydros Sole Doser Features Quiet Operation Robust Stepper Motor For Continuous Use Can Run in Reverse Includes 1/4" Push-fit Fittings Easy to Service Control up to 8 WiFi Devices The HYDROS App allows you to create rules and set schedules to control our 4-Outlet WiFi AC Power Strips and Smart Outlets. Quickly turn on or off different pieces of aquarium equipment like pumps, powerheads, lights, heaters, algae scrubbers, UV sterilizers, protein skimmers, and more. Accessories currently supported by the Drive Ports include Auto Top-Off (ATO) pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems What's Included and Specifications of your Hydros Sole Sole Controller Dimensions (LxWxH): 6 x 3.6 x 4.125in Tubing Size (IDxOD): 3 x 5mm (0.25in Push-fit Fitting) Pump Set Speeds (mL/min): 0.1 to 300 Power Supply Calibration Beaker
Hydros Force Port 24v Adapter Cable This HYDROS Force Port Adapter Cable (72 inches long) is designed to directly connect the Kraken to power popular 24V aquarium equipment. The eight available orange 24V Force Ports on the Kraken can power DC pumps, lights, or any device where the power supply output is 24V. It features a GX12-4 connector on one end and a standard female 5.5mm x 2.1mm barrel connector on the other to supply power to your 24V device while replacing the device's power brick. This cable is NOT suitable for 12V applications.
Hydros Control XD A HYDROS controller with 3 Universal Drive Ports dedicated to powering small 12V devices. Capable of driving cabinet LEDs, solenoids, ATO pumps, dosing pumps, and much more. About the Hydros Control XD Aquarium Controller The Control XD is a compact yet powerful controller with three 12-volt DC Drive ports that can run dosing pumps, LED cabinet lights, fans, and more. It also includes a Power port providing another layer of redundancy to the Control system. Set up is quick and easy, making this ideal for beginner and advanced hobbyists. All HYDROS products are engineered, assembled, and supported in the USA. The Hydros Control XD is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. The Control XD features an IP-65 Rated -Splash Proof, Dust Proof, and Secure Connection HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Drive Port - 2 AvailableThe Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported by the Drive Ports include Auto Top-Off (ATO) pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe.
Hydros XS Aquarium Controller The HYDROS Control XS is the ideal solution for small to midsize aquariums. This controller includes 4 universal-use Sense Ports for aquarium parameter measurement and safety. It's perfect as a standalone controller for a basic saltwater or freshwater tank or combine it with other HYDROS devices as part of a larger system!Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor temperature, detect leaks, power equipment, control outlets, and more with ease through the HYDROS App.Don't let the compact size of the HYDROS Control XS fool you. It is perfectly capable of performing all the main functions for your saltwater aquarium or freshwater tank. It can monitor temperature, sense leaks, control outlets, send alerts, and much more. All HYDROS products are engineered, assembled, and supported in the USA. The Control XS operates on a HYDROS Safety Net and is rated IP-65 to keep your equipment and aquatic life alive and thriving. All HYDROS products are engineered, assembled, and supported in the USA. The Hydros Control XS is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. The Control XS features an IP-65 Rated -Splash Proof, Dust Proof, and Secure Connection HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 4 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. The Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe. Please note that this is ONLY for the Control XS. Nothing else is included!
The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine.You will also need a HYDROS WaveEngine 0-10V Quad Cable for this application.The way it works is as follows: Connect the Quad Cable to the WaveEngine Connect the Tunze Adapter to the Quad Cable Connect the Tunze Adapter to your Tunze pump controller You can control up to four 0-10V Tunze pumps with the WaveEngine. To do this, you would need the following: 1 x HYDROS WaveEngine 0-10V Quad Cable 4 x HYDROS WaveEngine 0-10V Tunze Adapter* *You don't have to use four pumps. If you only had two pumps, you would only need 1 x Quad Cable and 2 x Tunze Adapters. We used four as our example since you can connect a maximum of four pumps with a Quad Cable.The reason an additional adapter is needed to control Tunze pumps with a WaveEngine is because Tunze pump controllers have a 9-pin jack rather than the more common 3.5 mm stereo jack.Combine your Tunze pumps with pumps from other brands using the HYDROS WaveEngine for a complete water circulation solution!
HYDROS Kraken 24V Power Center The Kraken introduces a new concept in aquarium controllers and provides high-power 24V DC switched outputs and a large heavy-duty power supply. This allows "power bricks" and "wall warts" to be removed from aquarium systems, significantly reducing wire clutter. The Hydros Kraken is The Ultimate Aquarium Power Strip for System Critical Equipment The HYDROS Kraken is an eight Force Port (24V DC) energy center and controller hybrid specifically designed to replace the power supplies of equipment like flow pumps, return pumps, and LED lights. Each individually controlled Force Port is built into the HYDROS controller for the highest level of security. The Kraken has an external industrial-grade Meanwell power supply with a 20amp/380w max power capacity, and it is designed to pass ETL/UL certification. Besides powering on and off the controllable Force Ports, the Kraken also has four 12V Drive Ports for cabinet lighting, auto-top-off (ATO) pumps, and solenoids. The HYDROS Kraken is passively cooled, and the controller runs silently with its isolated power circuitry. Best of all, each of the eight Force Ports offer individual power monitoring. Besides reducing the amount of 24V power bricks lying around the aquarium, the HYDROS Kraken is also a fully functioning HYDROS system controller capable of taking over intelligent decisions based on the status of other HYDROS devices within the Collective. The two HYDROS Command Bus Ports on the Kraken allow for a wired connection to any other HYDROS controller to form a collective of all Controls for the ultimate failsafe system. Control and monitor your Kraken power center from anywhere in the world using the technologically advanced HYDROS cloud-based app. The Kraken can also monitor and wireless control up to eight HYDROS WiFi devices. Hydros Kraken Features Power up to 20 amps of system-critical life support equipment Eliminates clutter by removing the need for eight individual 24V power supplies The Kraken is a full brain that can share and take over the decision-making of a HYDROS Collective Control up to eight WiFi devices like fish feeders, smart outlets, and even additional WiFi power strips Command Bus Port provides power to add redundancy power to your HYDROS Collective Designed to pass ETL/UL Certification Universal voltage works with both 110 and 220V External Industrial Grade Meanwell Super Brick No noisy fans, the Kraken is entirely passively cooled Optical isolation between the power circuitry and the control circuitry. This provides safety failure and isolates the control circuitry to reduce noise. Engineered, built, and supported in the USA. Force Ports - 8 Available Eight controllable DC power ports, each with individual power monitoring capabilities to safely manage aquarium equipment like lighting, water pumps, protein skimmers, filters, and much more using 24V power. Each high-current 24-volt Force Port provides up to 10amps of 24V DC power to eliminate equipment's "power bricks" and/or "wall warts" that are typically required to run. Hydros Kraken Force Port Examples Include Flow pumps 24V return pumps Measurement systems Other Hydros devices Controllers Small to medium-sized aquarium lights Drive Ports - 4 Available The Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported include: Auto Top-Off (ATO) pumps Dosing pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems Steering valves and relays stirrers Hydros iV testing vessel Battery Backup Port - 1 Available A specific connection for an external 12V Lead Acid Battery to keep your system alive during power failures. A battery will keep the entire HYDROS system running in Low Power Mode during a power failure. An internal trickle charger keeps these batteries ready to use. The voltage and current on the battery are monitored and reported to the user. This battery can be as large or small as you choose, from small sealed lead acid batteries to large arrays of boat batteries. The Kraken's internal charger can be disabled if you prefer to use a battery charger. Command Bus - 2 Available The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe. External Super Brick - 1 Available A large 24V "super brick" IP65-rated industrial power supply to run all the outputs and the entire HYDROS system. The Super Brick can provide up to 20 Amps of 24 Volt DC power (480 watts). Supply is manufactured by Meanwell, a highly trusted and regarded power supply company. Hydros Kraken Specifications Max Per Force Port: 10A Total Max Amperage: 20A Dimensions 9.5 x 4.75 x 3.2 (LxWxH)
HYDROS Control X3 / XP8 PRO Pack The Ultimate Aquarium Monitoring and Control System! What's Included in the X3 PRO Pack 1x Control X3 Unit 1x Control XP8 Unit 1x Temperature Sensor 1x pH Probe & Calibration Solutions 1x 6ft Command Bus Cable with two Terminators HYDROS App 1 Year Manufacturers Limited Warranty About the Hydros Control X3 Aquarium Controller The HYDROS Control X3 can connect to two sensor devices including temperature sensors, water level sensors, and leak detectors. The device also includes a Probe Port for monitoring pH or ORP levels, Control X3 can send alerts and notifications and control outlets for lights, pumps, feeders, and more. Achieve Ultimate Aquarium Control with the Control X3 Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor temperature, detect leaks, power equipment, control outlets, and more with ease through the HYDROS App.Versatile and Expandable without Extra ModulesUse any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities.IP-65 Rated -Splash Proof, Dust Proof, and Secure ConnectionHYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 2 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. The Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Probe Port - 1 AvailableOne of the most remarkable ports on the HYDROS Control X3 is the Probe Port.You can connect an ORP or a pH probe to the Probe Port but, this is no ordinary pH input! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system. Galvanic isolation prevents interference with other accessories connected tothe system like motors and pumps. Digital Galvanic isolation preserves the accuracy of the measurement by converting the signal to a digital domain before crossing the isolation threshold. Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe. About the Hydros Control XP8 The HYDROS Control XP8 is an eight outlet (120V AC) energy bar and controller hybrid specifically designed for equipment like heaters and return pumps which are critical to the life support of any aquarium system. Each of the individually controlled outlets is built into the HYDROS controller for the highest level of security. The Control XP8 has a built-in 60W universal voltage Meanwell power supply with a 14amp max power capacity and is designed to pass ETL/UL certification. Besides the clicking on and off of the controlled outlets, the XP8 is completely passively cooled and with its isolated power circuitry, the controller runs completely silent. Best of all, each of the eight outlets has individual power monitoring capabilities.Besides being an overbuilt power strip, the Control XP8 is also a fully functioning HYDROS system controller capable of taking over intelligent decisions based on the status of other HYDROS Devices within the Collective. The two HYDROS Command Bus ports on the XP8 allow for a wired connection to any other HYDROS controller to form a collective of all Controls in one for the ultimate failsafe system. Control and monitor your Control XP8 energy bar from anywhere in the world using the technologically advanced HYDROS cloud-based app. The Control XP8 also has the ability to monitor and control up to eight different HYDROS WiFi devices. Features of the HYDROS Control XP8 Power up to 14 amps of system-critical life support equipment The Control XP8 is a full brain that can share and take over the decision-making of a HYDROS Collective Control up to 8 WiFi devices like fish feeders, smart outlets, and even additional WiFi power strips Command Bus port provides power add redundancy power to your HYDROS Collective Designed to pass ETL/UL Certification Universal voltage works with both 110 and 220V Built-in 60W Meanwell Power Supply No noisy fans, the XP8 is completely passively cooled Optical isolation between the power circuitry and the control circuitry. This provides safety failure, and it isolates the control circuitry to reduce noise. Engineered, assembled, and supported in the USA. Control XP8 Specifications Max Per Relay: 8A Total Max Amperage: 14A 8 - Controllable Power Outlets - Eight controllable AC power outlets each with individual power monitoring capabilities to safely manage aquarium equipment like heaters, lighting, water pumps, protein skimmers, filters, and pretty much anything else. 2 - Command Bus - The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe. Up to 8 WiFi Devices - Connect up to 8 WiFi devices for added modular control on additional equipment like lights, pumps, feeders, and more by simply adding a HYDROS WiFi Power Strip or HYDROS Smart Plug (both sold separately). 1 Year manufacturers limited warranty What you can expect from your Control X3 and XP8 Control Check on the health of your aquarium from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor your HYDROS device(s) locally through WiFi Control X3 and XP8 feature a fast dual-core 32-bit processor Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices
Hydros Control X3 The HYDROS Control X3 can connect to two sensor devices including temperature sensors, water level sensors, and leak detectors. The device also includes a Probe Port for monitoring pH or ORP levels, Control X3 can send alerts and notifications and control outlets for lights, pumps, feeders, and more. Achieve Ultimate Aquarium Control with the Control X3 Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor temperature, detect leaks, power equipment, control outlets, and more with ease through the HYDROS App.Versatile and Expandable without Extra ModulesUse any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities.IP-65 Rated -Splash Proof, Dust Proof, and Secure ConnectionHYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 2 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. The Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Probe Port - 1 AvailableOne of the most remarkable ports on the HYDROS Control X3 is the Probe Port. You can connect an ORP or a pH probe to the Probe Port but, this is no ordinary pH input! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system. Galvanic isolation prevents interference with other accessories connected tothe system like motors and pumps. Digital Galvanic isolation preserves the accuracy of the measurement by converting the signal to a digital domain before crossing the isolation threshold. Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe.Please note that this is ONLY for the Control X3. Nothing else is included!
When you loose a part or they start to look old its nice when you can buy new ones.This pack contains a new black suction cup and black back cover. The only two parts on your Seneye you can loose or replace.
Neptune Apex Junior Aquarium Controller Designed to monitor your aquarium while being control ready. The Apex A3 Junior is a monitoring only solution from Neptune that monitors exactly what you need while keeping the door open to upgrade for more control in the future. Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your smart phone when things go off track. Monitors your equipment - ensuring it is operating correctly at all times - and lets you know when it's not. Tracks your manual test results, maintenance, livestock purchases, and tank observations and helps you can correlate issues in your aquarium to the things that are happening inside. Is able to manages the full operation of equipment (lights, pumps, filters, ATO, etc.) on your tank with simple setup wizards and an easy to use app (with separate add-ons) Is able to takes the place of many costly and cumbersome discrete components such as light timers, heater controllers, pump controllers, etc (with separate add-ons). Gives you the peace of mind to know how your aquarium is doing, instantly, from anywhere in the world. Key Features of the A3 Apex Junior Monitors pH and temperature Onboard FMM accessory ports. The Apex Junior has a total of 2 Includes the new and improved Magnetic Optical Sensor Includes the Sold Surface Leak Sensor (LD-2) Includes the new and improved Temperature Probe The Neptune Apex Junior is Wireless Internet Ready! For years we have advocated a wired network connection for your Apex due to its superior reliability - and we still do. However, for many people a wired connection is just not possible.So, for this Apex we spent countless man-hours developing an incredible 802.11g/n Wi-Fi connection with reliability that rivals a wired connection. And, the connection process to your home network is amazingly simple - getting you set up and on the Apex Fusion cloud service in just a couple of minutes! What is included in your Neptune Apex Junior Box 1 - Neptune Apex Junior Base System 1 - Temperature Probe - new design 1 - Double Junction pH Probe 2 - Built in FMM ports 1 - Optical Magnetic Sensor 1 - Solid Surface Leak Sensor (LD-2) See images for product comparisons and what is included with the different models. Note: The display is NOT included with the Apex and Apex Jr A3 Systems. It is available for purchase separately. More useful information and videos on the Apex A3 Series
Hydros Control X4 Aquarium Controller The HYDROS Control X4 is a powerful and robust aquarium controller capable of performing all essential functions needed to maintain a healthy aquarium without the need for extra expensive modules.Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Just one Control X4 can monitor temperature, pH, ORP, and water level, to name a few, and control pumps, timers, level sensors, and much more thanks to its technologically advanced design. It can be used as a standalone controller for saltwater aquariums, freshwater tanks, pond applications, or it can be added to other HYDROS Controls to build a more extensive system.The Control X4 operates on a HYDROS Safety Net and is rated IP-65 to keep your equipment and aquatic life alive and thriving.All HYDROS products are engineered, assembled, and supported in the USA. The Hydros Control X4 is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. The Control X4 features an IP-65 Rated -Splash Proof, Dust Proof, and Secure Connection HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 4 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. The Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Drive Port - 2 AvailableThe Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported byt the Drive Ports include Auto Top-Off (ATO) pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems 0-10V PortThe HYDROS Control 4 has 0-10V I/O (input and output) ports that allow it to control and receive commands from other HYDROS devices and accessories from other brands. A legacy automation system can provide input via the 0-10V Ports. They can control variable speed pumps and can also be used to monitor simple switch closures, like push buttons or float switches.Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe.Please note that this is ONLY for the Control X4. Nothing else is included!
Coralvue Mini Black Aquarium Controller Board The CoralVue Aquarium Mini Controller Board is a wall-mountable wire management system for aquarium equipment. Mount and display all types of controllers, modules, and surface mountable liquid dosers cleanly and professionally to the front of the board. On the inside, hide all equipment cords and power bricks. Additionally, safely mount power supplies and power strips, and organize cords, so they don't detract from the beauty of the aquarium. The Mini Controller Cabinet is designed to be mounted inside or beside an aquarium stand. Features of the Coralvue Mini Aquarium Controller Board Built from 1/2" Black PVC 100% water-resistant and non-conductive Includes mounting cleat with integrated level 10 - Cut-outs for routing cords to the back of the board 1 - Internal power brick shelf Made in the USA Coralvue Mini Aquarium Controller Board Specifications Board Dimensions: 15.75 x 14 x 3.5in (LxWxD) Cord Cut-Out Sizes: 4 x 1.25in (LxH) Internal Shelf Size: 2.625 x 9in (LxH) Mounting Cleat Size: 2.5 x 6in x 1in Safe and Built to Last - Aquarium Controller Board The CoralVue Mini Controller Board is built using 1/2" expanded PVC. This lightweight but very durable material can be easily cut, sanded, drilled, or screwed just like plywood to make mounting all equipment super easy.The cabinet is made with fire-rated material that is not only inert but will never rot. It can be painted and worked on, just like wood!The cabinet is 100% water-resistant and non-conductive for peace of mind and longevity. Aquarium Controller Board Neatly Organizes Your Equipment There are multiple wire management solutions inside the cabinet. There is an integrated brick shelve to secure power supplies up off the ground. This reduces the risk of failure, prevents power supplies from getting wet, and lessens the likelihood of a fire hazard since power bricks aren't all stacked dangerously on top of one another.
Coralvue Mini Black Aquarium Controller Board The CoralVue Aquarium Mini Controller Board is a wall-mountable wire management system for aquarium equipment. Mount and display all types of controllers, modules, and surface mountable liquid dosers cleanly and professionally to the front of the board. On the inside, hide all equipment cords and power bricks. Additionally, safely mount power supplies and power strips, and organize cords, so they don't detract from the beauty of the aquarium. The Mini Controller Cabinet is designed to be mounted inside or beside an aquarium stand. Features of the Coralvue Mini Aquarium Controller Board Built from 1/2" Black PVC 100% water-resistant and non-conductive Includes mounting cleat with integrated level 10 - Cut-outs for routing cords to the back of the board 2 - Zip tie tracks to lock power bricks in place and neatly arrange cords 1 - Internal power brick shelf Made in the USA Coralvue Mini Aquarium Controller Board Specifications Board Dimensions: 15.75 x 23.75 x 3.5in (LxWxD) Cord Cut-Out Sizes: 4 x 1.25in (LxH) Internal Shelf Size: 2.625 x 9in (LxH) Mounting Cleat Size: 2.5 x 6in x 1in Safe and Built to Last - Aquarium Controller Board The CoralVue Mini Controller Board is built using 1/2" expanded PVC. This lightweight but very durable material can be easily cut, sanded, drilled, or screwed just like plywood to make mounting all equipment super easy.The cabinet is made with fire-rated material that is not only inert but will never rot. It can be painted and worked on, just like wood!The cabinet is 100% water-resistant and non-conductive for peace of mind and longevity. Aquarium Controller Board Neatly Organizes Your Equipment There are multiple wire management solutions inside the cabinet. There is an integrated brick shelve to secure power supplies up off the ground. This reduces the risk of failure, prevents power supplies from getting wet, and lessens the likelihood of a fire hazard since power bricks aren't all stacked dangerously on top of one another. Zip tie tracks abound so you can lock power bricks in place and neatly arrange cords to eliminate "cable spaghetti"
Hydros Kraken Force Port Power Cable This HYDROS Force Port Power Cable is used to connect the Kraken to power a WaveEngine LE, WaveEngine, XD, or Control X10. This 6ft cable has two 4-pin GX12-4 fittings. One end attaches to any of the 8 Force Ports on the Kraken and the other end to the power port on any HYDROS Control Power Port Only (WaveEngine LE, WaveEngine, XD, or Control X10).
Neptune 2 Channel Apex to Light Dimming Cable Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cables have bare wires which connect to 0-10V dimmable ballasts.
Coralvue Mini Control Board Stand Legs Stand Legs for "Tabletop Mounting" of the CoralVue Aquarium Controller Boards. The legs provide a simple yet sturdy solution to displaying your controllers on a table or cabinet surface. Each leg securely swivles-locks in place. Available for the Standard and Mini Controller Boards by CoralVue. Coralvue Mini Control Board Leg Specifications Leg Dimensions: 14.5 x 11.5 x .5in (HxLxW) Footprint: 16.375 x 11.5in Total Height: 16in
This Seneye USB Power Adapter (US) is a compact power adapter that offers flexibility for those who don't wish to have their Seneye device constantly connected to a PC.Use this convenient USB adapter to power the Seneye Home, Pond or Reef whenever it's not connected to a computer. When powered by the USB Power Adapter readings are stored ever hour and the warning lights are displayed on the on your Seneye device if the water parameters are toxic.Simply reconnect the Seneye device to your PC, which has the Seneye connect application installed, and all stored readings are automatically uploaded into your seneye.me personal dashboard. Information uploaded to the website graphed and advice displayed.Features Connects directly to all Seneye devices Convenient USB-based adapter allows the Seneye devices to work without being connected to a PC, test results are stored in device memory. Plugs into a wall outlet Requires no other connector or cable Compatibility: with other USB devices US/Canada plug type
Coralvue Mini Control Board Stand Legs Stand Legs for "Tabletop Mounting" of the CoralVue Aquarium Controller Boards. The legs provide a simple yet sturdy solution to displaying your controllers on a table or cabinet surface. Each leg securely swivles-locks in place. Available for the Standard and Mini Controller Boards by CoralVue. Coralvue Mini Control Board Leg Specifications Leg Dimensions: 16.625 x 11.5 x .5in (HxLxW) Footprint: 16.375 x 11.5in Total Height: 26in
Hydros Flow Sensor - 2 Inch The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app.Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) Monitor Water Flow with the Hydros Flow Sensor The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it.It is safe for use in freshwater and saltwater aquarium systems. The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet. Four Sizes of the Hydros Flow Sensor are Available 3/4" Flow Sensor: Flow Range of 40- 800GPH 1" Flow Sensor: Flow Range of 50-1500GPH 1.5" Flow Sensor: Flow Range of 100-2500GPH 2" Flow Sensor: Flow Range of 200-4050GPH All flow sensors come with schedule 80 PVC Unions, and have an 8' wire length to plug into your Hydros Sense Port.While no power supply is needed, a Hydros Control with an available Sense Port is required for operation.
Hydros Flow Sensor - 1.5 Inch The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app.Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) Monitor Water Flow with the Hydros Flow Sensor The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it.It is safe for use in freshwater and saltwater aquarium systems. The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet. Four Sizes of the Hydros Flow Sensor are Available 3/4" Flow Sensor: Flow Range of 40- 800GPH 1" Flow Sensor: Flow Range of 50-1500GPH 1.5" Flow Sensor: Flow Range of 100-2500GPH 2" Flow Sensor: Flow Range of 200-4050GPH All flow sensors come with schedule 80 PVC Unions, and have an 8' wire length to plug into your Hydros Sense Port.While no power supply is needed, a Hydros Control with an available Sense Port is required for operation.
