Fleece Filters & Pads

Red Sea ReefMat 500 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 500. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 28m / 92 feetWidth: 11.3cm / 4.4"

Read more less

Red Sea ReefMat 1200 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 1200. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 35m / 115 feetWidth: 17cm / 6.7"

Read more less

Klir 50 Micron Fleece Filter Roll - 4 Inch Klir Fleece Filter Roll 4 Inch Overview The Klir Di-4 Fleece Roll boasts an impressive quantity of filtering material and provides months of service. Replacement rolls are economical and easy to replace. Each 4 Inch roll is 25 meters long and is 50 microns.

Read more less

Bubble Magus Auto Filter Roll Overview Replacement filter roll for the Bubble Magus Auto Roll Filter. Fits both Gen1 and Gen 2 fleece filters.

Read more less

Clarisea SK-5000 XL Fleece Roll - 40m Overview The ClariSea team have spent many months working to develop a new more efficient long life fleece and this has now been released as the ClariSea XL Fleece, with the following benefits: Increased flow through the media for longer life Improved dirt removal for cleaner water and darker rolls Reduced effect on skimmer foam when first changing a new roll Improved water resistance of center disposable core 40m roll length - 60% longer than the original 25m rolls Made in Europe 100% recyclable polypropylene Area Fleece on a Single Roll Clarisea Filters Do you know that on each Clarisea XL roll there is the equivalent surface area of the following number of standard filter socks. SK3000 XL - 75 x 4" Filter SocksSK5000 XL - 115 x 4" Filter socks Fleece Micron Size Like all fleece filters of this type, including bag filters, the size of the particle removed by the media will continuously reduce as the fleece dirties. Example; with a 200 micron filter sock, the largest particle that should pass through when new is 200 microns, however as the media starts to collect dirt, the holes get blocked creating smaller and smaller passages and so the bag collects out smaller and smaller particles. It continues to do this until the head pressure can no longer force water through the small holes and it overflows. The ClariSea works in exactly the same way except that instead of overflowing and having to change or clean the bag, it automatically rolls on to expose a fresh piece of material. The fresh fleece will allow larger particles to pass through and the dirtier material will stop smaller particles. Aquarium Water Flow Rate vs Filter Life The higher the flow rate through the fleece, the less time the roll will last.Imagine it as a large group of people trying to leave a building through one door. The slower and more organized they try to leave, the easier it is for individuals to bunch together and to fill into small gaps in the crowd, like water and small particles finding their way through small holes in the fleece. Compare this with people trying to leave quickly in a panic, and chaos is created, so that people back up around the door, like the water level backing up and triggering the float to move on the roll in the ClariSea without it becoming fully saturated with dirt. ClariSea Installation Height vs Filter Life The pressure to force such a large flow rate of water through such a fine fleece is created by the head height of the water in the ClariSea unit above the water level in the sump.The higher this difference is between the two levels, the higher the head pressure, and the easier it is to force the same amount of water through smaller and smaller holes created as the fleece blocks. The perfect height would therefore be with the opening to the silencing plates being about 1-2 cm (1/2-1") below the water surface. (On the tests for the 'flow vs filter life' chart, the bottom of the ClariSea was submerged 11cm below the surface). The deeper the Clarisea sits in the water, the less head pressure exists to force water through the fleece and therefore the shorter the life of the roll. Other Factors that Affect Filter Life Water flow (volume) Filter installation height above the water. Dirty tank - With most aquariums you will find that they act as large settlement chambers and that particles of food, detritus and dead bacteria settle within the sand or substrate. The clarisea will remove this detritus from the water before it gets a chance to settle but will also remove sediments from the substrate as it is stirred up by fish or manually. The rolls in the early days may last for a shorter length of time and should be seen to last longer and longer as the tank is cleaned. Greedy fish - Tanks with high stocking loads of hungry fish will dirty the roll faster but keep your aquarium sparklingly clean whilst removing uneaten food before it breaks down. 5 - Excessive Carbon Dosing - Carbon dosing works by growing bacteria in the water column that are then exported out of the system by skimming or filtration. Excessive carbon dosing can result in bacterial blooms which are seen as a slight cloudiness of the water. The ClariSea fleece is fine enough to remove these bacteria from the water but when in high volumes will blind the fleece and reduce it's life. If you notice this then we suggest slowly reducing the amount of carbon source added. Equally the installation of the ClariSea after a Nitrate Filter will also reduce the life and give a pale colored roll from the white bacteria.

Read more less

Klir 50 Micron Fleece Filter Roll - 7 Inch Klir Fleece Filter Roll 7 Inch Overview The Klir Di-7 Fleece Roll boasts an impressive quantity of filtering material and provides months of service. Replacement rolls are economical and easy to replace. Each 7 Inch roll is 50 meters long and is 50 microns.

Read more less

Durable, reusable filter media for any filtration method in marine or freshwater aquariums. Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system. Aqua Mesh filter media has many other unique applications including vibration reduction, temporary baffles or sump refugium separation. Aqua Mesh Black filter media is designed to be used as the first stage (if using all four), and will trap large sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Clarisea SK-3000 XL Fleece Roll - 40m Overview The ClariSea team have spent many months working to develop a new more efficient long life fleece and this has now been released as the ClariSea XL Fleece, with the following benefits: Increased flow through the media for longer life Improved dirt removal for cleaner water and darker rolls Reduced effect on skimmer foam when first changing a new roll Improved water resistance of center disposable core 40m roll length - 60% longer than the original 25m rolls Made in Europe 100% recyclable polypropylene Area Fleece on a Single Roll Clarisea Filters Do you know that on each Clarisea XL roll there is the equivalent surface area of the following number of standard filter socks. SK3000 XL - 75 x 4" Filter SocksSK5000 XL - 115 x 4" Filter socks Fleece Micron Size Like all fleece filters of this type, including bag filters, the size of the particle removed by the media will continuously reduce as the fleece dirties. Example; with a 200 micron filter sock, the largest particle that should pass through when new is 200 microns, however as the media starts to collect dirt, the holes get blocked creating smaller and smaller passages and so the bag collects out smaller and smaller particles. It continues to do this until the head pressure can no longer force water through the small holes and it overflows. The ClariSea works in exactly the same way except that instead of overflowing and having to change or clean the bag, it automatically rolls on to expose a fresh piece of material. The fresh fleece will allow larger particles to pass through and the dirtier material will stop smaller particles. Aquarium Water Flow Rate vs Filter Life The higher the flow rate through the fleece, the less time the roll will last.Imagine it as a large group of people trying to leave a building through one door. The slower and more organized they try to leave, the easier it is for individuals to bunch together and to fill into small gaps in the crowd, like water and small particles finding their way through small holes in the fleece. Compare this with people trying to leave quickly in a panic, and chaos is created, so that people back up around the door, like the water level backing up and triggering the float to move on the roll in the ClariSea without it becoming fully saturated with dirt. ClariSea Installation Height vs Filter Life The pressure to force such a large flow rate of water through such a fine fleece is created by the head height of the water in the ClariSea unit above the water level in the sump.The higher this difference is between the two levels, the higher the head pressure, and the easier it is to force the same amount of water through smaller and smaller holes created as the fleece blocks. The perfect height would therefore be with the opening to the silencing plates being about 1-2 cm (1/2-1") below the water surface. (On the tests for the 'flow vs filter life' chart, the bottom of the ClariSea was submerged 11cm below the surface). The deeper the Clarisea sits in the water, the less head pressure exists to force water through the fleece and therefore the shorter the life of the roll. Other Factors that Affect Filter Life Water flow (volume) Filter installation height above the water. Dirty tank - With most aquariums you will find that they act as large settlement chambers and that particles of food, detritus and dead bacteria settle within the sand or substrate. The clarisea will remove this detritus from the water before it gets a chance to settle but will also remove sediments from the substrate as it is stirred up by fish or manually. The rolls in the early days may last for a shorter length of time and should be seen to last longer and longer as the tank is cleaned. Greedy fish - Tanks with high stocking loads of hungry fish will dirty the roll faster but keep your aquarium sparklingly clean whilst removing uneaten food before it breaks down. 5 - Excessive Carbon Dosing - Carbon dosing works by growing bacteria in the water column that are then exported out of the system by skimming or filtration. Excessive carbon dosing can result in bacterial blooms which are seen as a slight cloudiness of the water. The ClariSea fleece is fine enough to remove these bacteria from the water but when in high volumes will blind the fleece and reduce it's life. If you notice this then we suggest slowly reducing the amount of carbon source added. Equally the installation of the ClariSea after a Nitrate Filter will also reduce the life and give a pale colored roll from the white bacteria.

Read more less

Red Sea ReefMat 1200 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 1200 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive-unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 1200 liters (315 gallons) Maximum Flow: 9000 liters / 2380 gallons per hour Fleece Mat Width: 17cm / 6.7" Fleece Mat Length: 35m / 115 feet Unit Dimensions: 27 x 30 x 48cm / 10.6" x 11.8" x 18.9" Media Basket Size: 700ml

Read more less

Red Sea ReefMat 500 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 500 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive- unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 500 liters (130 gallons) Maximum Flow: 6000 liters / 1580 gallons per hour Fleece Mat Width: 11.3cm / 4.4" Fleece Mat Length: 28m / 92 feet Unit Dimensions: 21 x 27 x 42cm / 8.3" x 10.6" x 16.7" Media Basket Size: 350ml

Read more less

Red Sea ReefMat Sump Modification Kit Overview Sump modification kit for G1 Reefers to in stall the ReefMat Fleece Filter Everything you need to make your installation fast and easy

Read more less

Durable, reusable filter media for any filtration method in marine or freshwater aquariums. Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system. Aqua Mesh filter media has many other unique applications including vibration reduction, temporary baffles or sump refugium separation.Aqua Mesh Blue filter media is designed to be used as the third stage (if using all four), and will trap smaller to medium sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Klir Di-4 Fleece Filter - Version 2 Overview The Klir Filter automatically unrolls new filtering material, removing suspended particles from your aquarium and producing crystal clear water. The Patent Pending Klir Fleece Filter Di-4 fits directly into most 4in filter sock chambers that automatically unrolls new material as it gets clogged, removing suspended particles from your aquarium and producing crystal clear water. Enjoy maintenance-free aquarium filtration for months at a time. Klir filter is a direct replacement filter socks on sumps with sock trays. Simply remove your sock and insert the Klir. As water passes through the Klir filter and the filtering material becomes saturated with waste, the water level will begin to rise. When the water makes contact with the optical sensor, a motor is activated to advance clean filtering material. As clean material is exposed, water is now able to flow freely, lowering the water level in the sock tray and deactivating the motor. Benefits Easy drop-in installation - no plumbing required. No additional sump space is needed. Results in crystal clear water filtered down to 50-microns - double the filtering capacity of most filter-socks. Waste is removed from the water column before it has time to breakdown, helping to maintain low nutrient parameters! The constant chore of monitoring and swapping filter socks or other mechanical media every few days is eliminated for months at a time. Once the filtering media is exhausted, replacing it is a snap and very economical. Features New upgraded Version 2 Klir Smart ControllerTriple Optical Magnet Mount SensorEasy drop-in installation even in tight spotsFully automatic with smart controllerCompact and directly replaces 4-inch filter socksHolds 25 yards of 50- Micron fleeceCapable of filtering up to 750 GPH per unitRemovable lid with carbon insert for noise and odorsExpandable to dual units for higher flow rates-4 Fleece Filter Sump RequirementsSump with sock-tray (or use the Klir Filter Bracket) Capable of holding 1.5 inches of water above the tray8.125 inches of available space below the tray7.125 inch sump lid opening directly above the filter socksWhat's Included Klir 4" Drop-In Automatic Fleece Filter 3.9" Swappable Collar 4.25" Swappable Collar Version 2 Smart Controller & Magnet-mount Sensor 25-Yard Roll of 50-Micron Fleece Activated Carbon Insert DC Geared Motor (DC12V/.06A)

Read more less

Red Sea ReefMat 250 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 250. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 32m / 105 feetWidth: 8.13cm / 3.2"

Read more less

Durable, reusable filter media for any filtration method in saltwater or marine aquariums.Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system.Aqua Mesh Grey filter media is designed to be used as the fourth stage (if using all four), and will trap smaller sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Bubble Magus Auto Roll Filter G2 Overview No more filter socks! The 2nd Generation Bubble Magus Auto Roll Filter (ARF) removes the need for filter socks. Water is fed into the internal chamber via the aquarium systems drain, and through the filter roll. When the water level rises in the chamber due to the filter media clogging, the increased water level triggers the float switch which causes the motor to wind the filter roll to a place where a new fresh piece of filter media is in the path of the water. The water level will then drop repeating the process. Features FeaturesManual buttonError LED lightMoisture resistance Imperial pipe connections Molded brackets Specifications 12v DC motor 110v Power adapter ULc DC12v 1amp output Water level switch Filter roll Non woven 150mm width, 25M length 1" I.D inlet pipe, complete with Flex pipe 40 x 36 x 26cm total dimensions (including motor body) 15.75" x 14.17" x 10.23" total dimensions (including motor body) Internal sump mounted

Read more less

Red Sea NanoMat Filter Rolls - 2 Pack Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea NanoMat2 replacement NanoMat fleece rolls are included Specifications Length: 18m / 59 feetWidth: 5.5cm / 2.16"

Read more less

Durable, reusable filter media for any filtration method in saltwater or marine aquariums.Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system.Aqua Mesh Green filter media is designed to be used as the second stage (if using all four), and will trap medium to larger sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Red Sea NanoMat . Plug & Play Efficient Overview The NanoMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the NanoMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. The NanoMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. It is a drop in replacement for the filter socks in Max Nano G2 systems, Reefer G2 systems and all standard 4" filter socks. Features Plug & Play installation that takes the place of the 4" filter socks in compatible systems. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Processor controlled drive unit (no App or internet connection required) Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Auto shutdown to prevent fleece wastage Specifications Capacity - Systems up to 200 liters (53 gallons) Fleece Mat Width: 5.5cm / 2.16" Fleece Mat Length: 18m / 59 feet Unit Dimensions: 10 x 9 x 41cm / 3.9" x 3.5" x 16.1"

Read more less

Klir Diverting Cap - 4 Inch Overview This optional Klir Flow Diverter to cap the unused holes of your sock tray. You can easily dial it to divert excess flow or to filter less aggressively.

Read more less

Red Sea ReefMat 250 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 250 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive- unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 250 liters (66 gallons) Maximum Flow: 3500 liters / 925 gallons per hour Fleece Mat Width: 8cm / 3.15" Fleece Mat Length: 32m / 105 feet Unit Dimensions: 16 x 20 x 49cm / 6.3" x 7.9" x 19.3"

Read more less

Klir Y Cable Overview This cable allows you to link two Klir Filter units together to a single sensor and controller. This cable works great if you want to install two units into the same overflow compartment and ensure that both units are synced and work equally.

Read more less

Klir Di-7 Fleece Filter - Version 2 Overview The Klir Filter automatically unrolls new filtering material, removing suspended particles from your aquarium and producing crystal clear water. The Patent Pending Klir Fleece Filter Di-7 fits directly into most 7in filter sock chambers that automatically unrolls new material as it gets clogged, removing suspended particles from your aquarium and producing crystal clear water. Enjoy maintenance-free aquarium filtration for months at a time. Klir filter is a direct replacement filter socks on sumps with sock trays. Simply remove your sock and insert the Klir. As water passes through the Klir filter and the filtering material becomes saturated with waste, the water level will begin to rise. When the water makes contact with the optical sensor, a motor is activated to advance clean filtering material. As clean material is exposed, water is now able to flow freely, lowering the water level in the sock tray and deactivating the motor. Benefits Easy drop-in installation - no plumbing required. No additional sump space is needed. Results in crystal clear water filtered down to 50-microns - double the filtering capacity of most filter-socks. Waste is removed from the water column before it has time to breakdown, helping to maintain low nutrient parameters! The constant chore of monitoring and swapping filter socks or other mechanical media every few days is eliminated for months at a time. Once the filtering media is exhausted, replacing it is a snap and very economical. Features New upgraded Version 2 Klir Smart ControllerTriple Optical Magnet Mount SensorEasy drop-in installation even in tight spotsFully automatic with smart controllerCompact and directly replaces 7-inch filter socksHolds 50 yards of 50-micron fleeceCapable of filtering up to 1800 GPH per unitRemovable lid with carbon insert for noise and odorsExpandable to dual units for higher flow rates-7 Fleece Filter Sump RequirementsSump with sock-tray (or use the Klir Filter Bracket) Capable of holding 1.5 inches of water above the tray8.125 inches of available space below the tray7.125 inch sump lid opening directly above the filter socksWhat's Included Klir 7" Drop-In Automatic Fleece Filter 6.9" Swappable Collar 7.55" Swappable Collar Version 2 Smart Controller & Magnet-mount Sensor 50-Yard Roll of 50-Micron Fleece Activated Carbon Insert DC Geared Motor (DC12V/.06A)

Read more less

Klir Di-4 Filter Bracket Overview An accessory for the Klir Di-4 Fleece Filter that allows you to add it to sumps without sock trays or to DIY sump applications using the Klir Filter Bracket. Features Dual Submerged 1in inputs Compatible with full-siphon overflows Built-in adjustable flow diverter to bypass excess flow or to filter less aggressively Dimensions: 7.4" x 5.25" x 12.625"

Read more less

Klir Di-7 Filter Bracket Overview An accessory for the Klir Di-7 Fleece Filter that allows you to add it to sumps without sock trays or to DIY sump applications using the Klir Filter Bracket. Features Dual Submerged 1.5" inputs Compatible with full-siphon overflows Built-in adjustable flow diverter to bypass excess flow or to filter less aggressively Dimensions: 11" x 8" x 13"

Read more less

Clarisea SK-5000 G3 Automatic Fleece Filter Overview The ClariSea fleece filter is an ultra compact, patented, high efficiency water filtration system, which continuously removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column to improve water quality and clarity. The ClariSea design has been continuously developed and improved over 4 years, and is suitable for use in both marine and freshwater aquariums, fish-breeding and coral propagation systems. Benefits BRILLIANTLY CLEAR WATER - A ClariSea filter will completely replace the need for high maintenance filter socks and result in crystal clear aquarium water. LIGHT PENETRATION - The use of a ClariSea fleece filter will ensure the highest possible filtration efficiency for optimal light penetration to enhance growth of your corals and plants. REDUCED ACCUMULATION OF ORGANIC WASTE - Continuously removes detritus & organic waste from the water column preventing it breaking down into nitrate & phosphate in your aquarium. REDUCED LOAD ON PROTEIN SKIMMER - The ClariSea fleece filter dramatically reduces the load on your protein skimmer by removing even the smallest of particles. REDUCED MAINTENANCE - Constant filtration results in reduced maintenance of pumps, wave makers and protein skimmers, plus... no more socks to clean. NO MORE DETRITUS - A ClariSea fleece filter will noticeably reduce the accumulation of detritus in your aquarium substrate and sump. Features Extremely small installation footprint - will fit more aquariums without sump modificationHigh volume filtration capacity - up to 5000 L/hrRemoves the requirement and maintenance issues of filter socksReduces nitrates and organics in the aquariumImproves water quality and clarityMulti-function smart controller - automatically advances dirty fleece. Audible & visual alarms for end of roll and filter jam/float switch/overflow errors. Prevents continuous wind-on of rollBuilt in fail-safe overflow - to prevent floodingSimple-to-change fleece, without removing ClariSea from sumpSpecial 40m extra long fleece roll - phosphate free and low-odorLong roll life - expected 8-10 weeks after initial dirt removalQuick release silencer/splash plates - for quiet operation, reduced salt creep and easy cleaning & maintenanceWater bypass system - for total water managementInlet adapter connects to 1", 32mm and 40mm pipe diametersFeatures Fully constructed body - for easier and faster installationUpgraded motor & cruciformTop rollers with guides - for lower fleece/motor tensionEasier roll changes with the new drop in fleece holder and dirty roll removal tool Specifications Recommended flow rate: 5,000 l/h (800 USG/h) Optimal water depth for longer fleece life: 10cm (4") Minimum submerged water depth: 5cm (2") Maximum submerged water depth: 20cm (8") Hang-on bracket height adjustment: up to 14cm (5.5") Recommended aquarium size: up to 1200 liters (320 USG) Universal inlet connection: 32mm / 40mm / 1" (Slip fit socket needed for 40mm connection) Filter fleece: 15cm (6") width The ClariSea unit includes a smart controller for the automatic and manual advance of the fleece roll. This will also show visual and audible alarms if a potential error is detected during operation.

Read more less

Clarisea SK-3000 G3 Automatic Fleece Filter Overview The ClariSea fleece filter is an ultra compact, patented, high efficiency water filtration system, which continuously removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column to improve water quality and clarity. The ClariSea design has been continuously developed and improved over 4 years, and is suitable for use in both marine and freshwater aquariums, fish-breeding and coral propagation systems. Benefits BRILLIANTLY CLEAR WATER - A ClariSea filter will completely replace the need for high maintenance filter socks and result in crystal clear aquarium water. LIGHT PENETRATION - The use of a ClariSea fleece filter will ensure the highest possible filtration efficiency for optimal light penetration to enhance growth of your corals and plants. REDUCED ACCUMULATION OF ORGANIC WASTE - Continuously removes detritus & organic waste from the water column preventing it breaking down into nitrate & phosphate in your aquarium. REDUCED LOAD ON PROTEIN SKIMMER - The ClariSea fleece filter dramatically reduces the load on your protein skimmer by removing even the smallest of particles. REDUCED MAINTENANCE - Constant filtration results in reduced maintenanceof pumps, wave makers and protein skimmers, plus... no more socks to clean. NO MORE DETRITUS - A ClariSea fleece filter will noticeably reduce the accumulation of detritus in your aquarium substrate and sump. Features Extremely small installation footprint - will fit more aquariums without sump modificationHigh volume filtration capacity - up to 5000 L/hrRemoves the requirement and maintenance issues of filter socksReduces nitrates and organics in the aquariumImproves water quality and clarityMulti-function smart controller - automatically advances dirty fleece. Audible & visual alarms for end of roll and filter jam/float switch/overflow errors. Prevents continuous wind-on of rollBuilt in fail-safe overflow - to prevent floodingSimple-to-change fleece, without removing ClariSea from sumpSpecial 40m extra long fleece roll - phosphate free and low-odorLong roll life - expected 8-10 weeks after initial dirt removalQuick release silencer/splash plates - for quiet operation, reduced salt creep and easy cleaning & maintenanceWater bypass system - for total water managementInlet adapter connects to 1", 32mm and 40mm pipe diametersFeatures Fully constructed body - for easier and faster installationUpgraded motor & cruciformTop rollers with guides - for lower fleece/motor tensionEasier roll changes with the new drop in fleece holder and dirty roll removal tool Specifications Recommended flow rate: 3,000 l/h (800 USG/h) Optimal water depth for longer fleece life: 10cm (4") Minimum submerged water depth: 5cm (2") Maximum submerged water depth: 20cm (8") Hang-on bracket height adjustment: up to 14cm (5.5") Recommended aquarium size: up to 600 liters (160 USG) Universal inlet connection: 32mm / 40mm / 1" (Slip fit socket needed for 40mm connection) Filter fleece: 10cm (4") width The ClariSea unit includes a smart controller for the automatic and manual advance of the fleece roll. This will also show visual and audible alarms if a potential error is detected during operation.

Read more less

Klir Diverting Cap - 7 Inch Overview This optional Klir Flow Diverter to cap the unused holes of your sock tray. You can easily dial it to divert excess flow or to filter less aggressively.

Read more less