IceCap CO2 Absorbent Media - 1KG Struggling with low pH? Frustrated by slow coral growth? We've got the solution!Introducing the IceCap CO2 Scrubber and CO2 Absorbent MediaIt happens to all of us at some point during our reefing careers. You've to your alkalinity level right where you want it, but you're plagued by chronically low pH. If this sounds all too familiar, then rest assured you've come to the right place. There is a solution that is neither complicated nor expensive. All you'll need is a simple device called a CO2 Scrubber. It looks very similar to a media reactor, so the familiar form factor should put you at ease before you even begin.The IceCap CO2 Scrubber, in particular, is an attractive and affordable option that is nearly universally compatible with any aquarium running a protein skimmer. The way it works is simple: you just attach the tubing that comes with the scrubber to the air intake on your skimmer. Then, you connect the other end to the CO2 scrubber and you're done. That's it! Now you'll be able to raise the pH of your aquarium and control carbon dioxide. Features of CO2 Absorbent Media from IceCap Our user-friendly give you a visual cue when it's time to replace it: it changes color from white to pink! Once the color change is complete, you'll know it's time to replace the media (although you should still be checking your levels regularly with a pH test kit). Our media isn't teeny-tiny like competitor products. We picked a perfectly pelletized size for minimal dust and maximum performance. We've got nothing to hide. There's no secret recipe or proprietary blend. You should always know what you're putting into your tank, so that's why we put it on the label! Our media is a precise mixture of Calcium hydroxide (Ca(OH)2) and Sodium Hydroxide (NaOH). Our convenient size (1kg) or 2.2lbs makes sure you get exactly what you need. It's essential to replace the media after it's exhausted. If exhausted and left to stand it will revert back to a white color. It will appear to be fresh but it is not usable anymore. IceCap CO2 Absorbent Media Instructions for Use Fill your reactor with CO2 Absorbent Media Connect the output of the reactor to the skimmer's intake Monitor your pH and replace the media once it turns pink or if pH begins to drop. How Often Do I Replace The Media? Once the media has completely changed colors from white to pink, you'll want to take the old media out (it cannot be regenerated) and replace it with new media.In terms of frequency, it's going to vary from hobbyist-to-hobbyist for a variety of reasons, including the aquarium itself and the environment in which it is located (your home, office, etc.). But as a general rule of thumb, you'll want to be prepared to change the media every two weeks (14 days). We recommend always have extra media on hand. That way, you'll never be caught in a situation where the parameters you've worked hard to stabilize begin to shift.
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums. Universal Features RO/DI single-membrane system with durable clear filter canisters Glycerin-filled pressure gauge Single Dow Filmtec membrane (The best there is.) 5 micron IceCap polypropylene sediment pre-filter 5 micron IceCap carbon block filter Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten and loosen canisters Installation connection fittings, polyethylene tubing & accessories Does not require a power source to run 75gpd & 100gpd Systems General Details Optimal Feed Water Pressure: 50-80 psi Maximum Handling Water Pressure: 150 psi Optimal Water Temperature: 25C (77F) Maximum Water Temperature: 39C (90F) pH Range: 2-11 Typical Rejection Rate: ~1:3 Uses standard 10in canisters, cartridges, and 1/4" push-connect fittings Dimensions (LxWxH): 16in x 6.5in x 15.5in Limited Warranty: 1 year (does NOT include filters)
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 8 frags Dimensions: 5 x 3 x 1.8in (L X W XH)
The IceCap Dual Stage DI systems are designed to effectively treat filtered water before using it in your aquarium. The Dual DI stage filter helps remove excessive amounts of TDS and contaminants like ammonia, phosphates, nitrates, silicates, etc. The color will change from blue to brown as the DI media is exhausted.Specifications Uses Standard 10in Canisters, Cartridges & 1/4" Push-Connect Fittings Dimensions (LxWxH): 10.5 x 5 x 14.25in Limited Warranty: 1 year (does NOT include filters) What's Included Two durable clear canisters Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten & loosen canisters Polyethylene installation tubing
IceCap 4K Gyre Flow Pump with HYDROS WaveEngine LE Dual Pump Controller The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is not only more powerful than its predecessor, it is now WiFi controllable, allowing you to fine-tune your flow effortlessly and wirelessly from your mobile device.Gyre 4K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 4K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! Technical Specifications Rating: Aquariums 25-150+ Gallons Maximum Flow: 4,000 Gallons Per Hour Minimum Flow: 1286 Gallons Per Hour Power Consumption: 13-45 Watts Size: 12L x 3.15W x 1.7H Weight:457g/16.10z Cable Length: 6ft Tank Thickness:Up to 5/8" thick Glass or Acrylic: Safe for Both HYDROS Pump Controller - Simplify the way we manage flow in our aquariums The WaveEngine LE "Light Edition" allows you to easily add different brand pumps to your aquarium and obtain the ultimate flow. Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Connect up to two (2) pumps directly to the controller, removing multiple power bricks' clutter.** App-Based Dual Pump Controller A single app controls a variety of different pumps from your mobile device. Access all the features you desire without needing multiple apps, individual controllers, and bulky power supplies that require a "bird's nest" of cables and wires.Until now, limited capabilities have restricted the simple controllers that manage popular pumps like the Maxspect Gyre, Reef Octopus Octo Pulse flow pumps. In addition to this convenient and advanced control, you can reduce clutter by eliminating the DC power brick used by modern controllable pumps! Direct Pump DriverThe HYDROS WaveEngine LE connects directly to the pump head, removing the clutter of the power brick and the control head for these pumps. Maxspect Gyre XF-130 / 230, XF-150 / 250, XF-330 / 350, XF-280* IceCap Gyre 1K, 3K, 2K, 4K Reef Octopus RODC-2500, 3500 and 5500, VarioS-2 and 4, Octo Pulse 2 and 4 0-10V Input ControlRECIEVE commands from other devices, including push buttons, float switches, plus much more.Here Is What WELE Can Do One App to Rule Them All! The HYDROS App from CoralVue will completely replace the need for individual manual controllers and apps. We can easily tap into the native control platform to access all the preset flow patterns and modes or create our own through modern technology! Connect wirelessly to the HYDROS WaveEngine and then communicate with your flow pumps.Features Easily add pumps and specify the location of the pump in the aquarium as well as specify min & max speed a pump can run at Use different brand pumps to work together in different flow preset such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Create multiple groups Create and access operational modes such as Feed, Water Change, or Night mode Monitor power consumption (volts, amps & watts) based on individual pumps & total consumption of all attached pumps Monitor pump's RPM to ensure maximum performance Full cloud connectivity so you can control your pumps from anywhere in the world Real-time notifications of system status & pump performance Define custom flow patterns of any duration up to 24 hours with 1/1000 second accuracy Power up to 2 pumps with the Direct Drive ports using a single 100/240V 4 amp input power supply (included). The output is 24V/6 amps.
*Maxspect Gyre 280 pumps can only run at 75% max intensity. **An appropriate pump adapter **PLEASE NOTE: An appropriate pump adapter or 0-10V cable (sold separately) is required to connect pumps directly to the HYDROS WaveEngine LE. Kit includes 2K Gyre Pump, power supply and Dual Gyre Pump WiFi Controller
IceCap Bio-Spheres Media - 1KG IceCap's Bio-Sphere is a dense arrangement of small ceramic spheres in a durable and compact one-and-a-quarter-inch ball capable of providing biological filtration up to 18 gallons each. The media's ultra-high surface area is perfect for the mass colonization of beneficial bacteria required for efficient nutrient cycling in both freshwater and marine aquariums and ponds. Stack in a sump, trickle filters, media filters, wet/dry filters, hang-on-back filters, or directly in the aquarium. Features of the IceCap Bio Sphere Media Ultra-High Surface Area Media Durable Ceramic Media Beads Neutral pH (7-7.5) 1KG (40 Bio-Sphere Balls) treats up to 750gal IceCap Bio Sphere Media Instructions and Maintenance Rinse media before use. Media can be placed directly into the aquarium, reef sump, canister filter, wet/dry filter, or hang-on-back filter. The included bag helps keep media contained within the filter. For best results, seed the media with your choice of bacteria culture by soaking overnight before adding it to the aquarium.For optimal results, rinse the media with tank water and gently scrub the surface debris every 12 months. Replace media every 5 years or as needed. Add additional media to increase the biological capacity of a filter system. CAUTION - NEVER CLEAN/REPLACE MEDIA ALL AT ONCE
In the event of a power outage, is your tank protected?When it comes to a power failure, it's not a matter of if, but when. Fish and corals can perish in as little as 4 hours without water flow. The IceCap Battery Backup Version 3.0 will keep your flow pump running uninterrupted in the event of a power loss for ~35 hours*. You can connect two pumps to the battery backup and run them simultaneously for ~17 hours after the power goes out. To double your backup run time, you can even connect two battery backups together for further protection.Features & Highlights New model updated for 2021! This new version is 12V like the original! Turns on immediately after a power failure to protect your aquarium Keeps a single flow pump running ~35 hours after a power loss You can connect 2 flow pumps to a single battery backup for ~17 hours of backup operation You can connect two battery backups together to double the run time of a single pump to ~70 hours Compact and attractive form factor that is easy to mount on a wall or aquarium stand Get started immediately: power supply, pump adapters, and user guide are all included in the box Compatible with most 12 volt pumps from brands like Maxspect, IceCap, and Reef Octopus. * On average 50w at 30% power single pump/single power cell.Which Pump Brands Can I Connect to the IceCap Battery Backup v3.0? /strong>One of the biggest benefits of the IceCap Battery Backup over competing brands is that it isn't restricted to a single brand of pump. The new battery backup v3.0 is compatible with most 12-24V or less variable speed DC pumps on the market today.Some examples include: Maxspect Gyre Pumps (All Models) IceCap Gyre Pumps (All Models) Reef Octopus Octo Pulse Pumps (All Models) Reef Octopus VarioS Pumps (VarioS-2 and VarioS-4)
Battery Backup Best Practices for Operation & MaintenanceThe IceCap Battery Backup v3.0 should be kept in an environment with a temperature of approximately 70d F for optimal operation. The life of the battery will depend on the number of discharges that the unit has cycled through. Every time the unit cycles, the life of the battery and its capacity are reduced.Specifications DC Charger: Input: 100V to 240V 50/60Hz | Output: 27V 600MA Main Unit DC: Output: 12V x 2.5A max | Input: 27V 1A max Fuse: 250V 10A 5x20mm fast blow Size: 5.75in x 5in x 3.125in (WxLxH) Weight: 3.85lbs
IMPORTANT: NOT compatible with Reef Octopus VarioS Pumps, EcoTech pumps, Tunze, or AI Nero pumps.
IceCap CO2 Scrubber - Medium Raise pH in Your Reef Aquarium with an IceCap CO2 Scrubber The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges. Run This Simple Test to See if a CO2 Scrubber Will Help You The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water. Installing the IceCap CO2 Scrubber is Super Easy The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber.Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out. Running a CO2 Scrubber Helps Raise and Maintain pH The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes. Specifications of the Medium IceCap CO2 Scrubber Body Size: 4 inch Media Capacity: Approx. 1KG Footprint: 4.5 x 4.5in Height: 9.5" Hang-On Bracket Included: Yes
Modern Skimmer Design & FunctionalityThe IceCap K1 Nano is a remarkably compact skimmer that offers a new level of refined filtration for marine aquariums ranging from 10 to 30 gallons. All aspects of the skimmer were implemented to surpass many challenges other skimmers on the market misses out on. Included magnet mount allows for easy placement on surfaces up to 1/2in thick.Compact & Built to LastMaster crafted from robust PVC and high-quality acrylic. All components are marine safe and refined in every aspect to provide the latest enhancements in foam fractionation and the highest in quality. An impressively compact footprint makes it the ideal candidate for tight compartment applications. Every aspect of the skimmer disassembles completely for easy service.Quiet Performance & ControlAt the Core of the IceCap K1, you will find the DCair 200 skimmer pump built to provide efficient performance. The pipeless output offers fine-tuning and trouble-free underwater outflow plus quiet operation. Our pipeless design not only saves on space but also allows the outgoing water to exit on the side of the skimmer and below the water surface providing splash-free circulation in the sump.Bioload HandlingThe bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system.Features Magnet Mount Distinctive Turbulence Reducing Body Solid PVC & Acrylic Construction Bubble Dispersant Chamber Pipeless Output Valve Efficient & Quiet Operation Disassembles Completely for Easy Cleaning & Maintenance In-Sump Installation Only Specifications Skimmer Body: 2in Footprint: 2.7in x 3.2in Footprint with mount: 4.75 x 3in or 3.5 x 4in Total Height: 13in Magnet Mount: Up to 1/2in thick Pump: DCair 200 Pinwheel pump operation at 26gph and 5 watts.
IceCap CO2 Scrubber - Small Raise pH in Your Reef Aquarium with an IceCap CO2 Scrubber The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges. Run This Simple Test to See if a CO2 Scrubber Will Help You The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water. Installing the IceCap CO2 Scrubber is Super Easy The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber.Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out. Running a CO2 Scrubber Helps Raise and Maintain pH The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes. Specifications of the Small IceCap CO2 Scrubber Body Size: 4 inch Media Capacity: Approx. 0.5KG Footprint: 4.5 x 4.5in Height: 6.5" Hang-On Bracket Included: Yes
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums. Universal Features RO/DI single-membrane system with durable clear filter canisters Glycerin-filled pressure gauge Single Dow Filmtec membrane (The best there is.) 5 micron IceCap polypropylene sediment pre-filter 5 micron IceCap carbon block filter Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten and loosen canisters Installation connection fittings, polyethylene tubing & accessories Does not require a power source to run 150gpd & 200gpd Systems General Details Optimal Feed Water Pressure: 65-80 psi Maximum Handling Water Pressure: 150 psi Optimal Water Temperature: 25C (77F) Maximum Water Temperature: 39C (90F) pH Range: 2-11 Typical Rejection Rate: ~1.5:1 Uses standard 10in canisters, cartridges, and 1/4" push-connect fittings Dimensions (LxWxH): 16in x 6.5in x 18.5in Limited Warranty: 1 year (does NOT include filters)
Replenish Evaporated Water... with No Power!The IceCap Gravity ATO automatically replaces evaporated water in freshwater and marine aquariums without the use of electricity. Easy to UseTo use it, screw the base to the bottle, then mount it to tank rim. When the water level drops to reveal the shorter tube, the water in the bottle automatically flows into the tank do to the pressure difference. Package Includes:
Gravity ATO Base x3 Mounting Inserts for different rim sizes 500ml Bottle Silicone Tubing Installation
Select a suitable mounting insert for the tank's thickness and insert it into the groove on the Gravity ATO Base. Cut the tubing to the proper length based on the desired water level. There should be a long tube and a short tube, both cut at a slant. Insert the two tubes onto the Gravity ATO Base. Thread the bottle into the base and install it onto the rim of the fish tank. Adjust water level as needed to ensure both tubes are in the water. Over time, the Gravity ATO will replenish evaporated water when the water level falls under the shorter tube.
The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is not only more powerful than its predecessor.Gyre 4K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 4K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! New for 2020 is the addition of the IceCap Dual Gyre Pump WiFi Controller. The new controller utilizes CoralVue's powerful HYDROS platform to access life-like flow patterns, scheduling, and much more.Technical Specifications Rating: Aquariums 25-150+ Gallons Maximum Flow: 4,000 Gallons Per Hour Minimum Flow: 1286 Gallons Per Hour Power Consumption: 13-45 Watts Size: 12L x 3.15W x 1.7H Weight:711g/25.1z Cable Length: 6ft Tank Thickness: Up to 5/8" thick Glass or Acrylic: Safe for Both Kit includes 4K Gyre Pump and power supply.< br/>Please Note: You will require the Hydros Wave Ice Cap Gyre Engine Pump Adapter in order to hook this pump up to the wave engine. It is currently not included
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 23 frags Dimensions: 9.5 x 4.1 x 1.8in (L X W XH)
The IceCap Magnetic Mount Float Valve can be either hung on the side of a sump or any container without the need to drill a hole. The IceCap Magnetic Mount Float Valve comes with universal tubing retainer and tubing
A Simple Way to Organize Your Dosing LinesThe IceCap magnetic tube holder universally mounts tubing securely to most smooth locations up to 1/2in thick. The magnetic holder can be fixed on the sump or aquarium wall and can hold up to 4 dosing tubes Dimensions (LxWxH): 3.5 x 2 x 1.75in
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 8 frags Dimensions: 9.5 x 4.8 x 1.8in (L X W XH)
The IceCap Gyre is back and better than ever! The all-new IceCap 2K Gyre Flow Pump is not only more powerful than its predecessor.Gyre 2K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 2K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! New for 2020 is the addition of the IceCap Dual Gyre Pump WiFi Controller. The new controller utilizes CoralVue's powerful HYDROS platform to access life-like flow patterns, scheduling, and much more.Technical Specifications Rating: Aquariums 20-90+ Gallons Maximum Flow: 2,000 Gallons Per Hour Minimum Flow: 739 Gallons Per Hour Power Consumption: 8-25 Watts Size: 8.78L x 2.83W x 1.5H Weight:457g/16.10z Cable Length: 6ft Tank Thickness: Up to 1/2" thick Glass or Acrylic: Safe for Both Kit includes 2K Gyre Pump and power supply.< br/>Please Note: You will require the Hydros Wave Ice Cap Gyre Engine Pump Adapter in order to hook this pump up to the wave engine. It is currently not included
IceCap CO2 Scrubber - Large Raise pH in Your Reef Aquarium with an IceCap CO2 Scrubber The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges. Run This Simple Test to See if a CO2 Scrubber Will Help You The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water. Installing the IceCap CO2 Scrubber is Super Easy The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber.Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out. Running a CO2 Scrubber Helps Raise and Maintain pH The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes. Specifications of the Large IceCap CO2 Scrubber Body Size: 4 inch Media Capacity: Approx. 2KG Footprint: 5.2 x 5.2in Height: 11.5" Hang-On Bracket Included: Yes
IceCap 50 PRO Hang On Back Turf Scrubber Fight Algae with Algae with a HOB Turf Scrubber! IceCap PRO Hang On Back (HOB) Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank in the process.This all-natural form of water filtration can reduce and even eliminate the need for water changes. Best of all, the scrubber hangs right on the back of the aquarium, no sump or plumbing is required! Plug-and-play even comes with its own IceCap EVO feed pump. Ice Cap Hang-On Back 50 PRO Algae Scrubber Specifications Dimensions (LxWxH): 11.3 x 5.3 x6.7inScreen Size: 7.4 x 3.5inLED Wattage: 6w / DC24VFeed Pump: EVO-400 (6w)Fits Tank Rims: 1/4-1 3/8inMax Flowrate: 105gphAquariums up to: 80gal How the IceCap Turf Scrubber Works IceCap HOB Turf Scrubber is designed to be placed directly rim of the aquarium with the included EVO 400 pump placed within the aquarium. The water going into the scrubber is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the actual display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap 50Pro Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap 2K Gyre Flow Pump with HYDROS WaveEngine LE Dual Pump Controller The IceCap Gyre is back and better than ever! The all-new IceCap 2K Gyre Flow Pump is not only more powerful than its predecessor, it is now WiFi controllable, allowing you to fine-tune your flow effortlessly and wirelessly from your mobile device.Gyre 2K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 2K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! Technical Specifications Rating: Aquariums 20-90+ Gallons Maximum Flow: 2,000 Gallons Per Hour Minimum Flow: 739 Gallons Per Hour Power Consumption: 8-25 Watts Size: 8.78L x 2.83W x 1.5H Weight:457g/16.10z Cable Length: 6ft Tank Thickness:Up to 1/2" thick Glass or Acrylic: Safe for Both HYDROS Pump Controller - Simplify the way we manage flow in our aquariums The WaveEngine LE "Light Edition" allows you to easily add different brand pumps to your aquarium and obtain the ultimate flow. Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Connect up to two (2) pumps directly to the controller, removing multiple power bricks' clutter.** App-Based Dual Pump Controller A single app controls a variety of different pumps from your mobile device. Access all the features you desire without needing multiple apps, individual controllers, and bulky power supplies that require a "bird's nest" of cables and wires.Until now, limited capabilities have restricted the simple controllers that manage popular pumps like the Maxspect Gyre, Reef Octopus Octo Pulse flow pumps. In addition to this convenient and advanced control, you can reduce clutter by eliminating the DC power brick used by modern controllable pumps! Direct Pump DriverThe HYDROS WaveEngine LE connects directly to the pump head, removing the clutter of the power brick and the control head for these pumps. Maxspect Gyre XF-130 / 230, XF-150 / 250, XF-330 / 350, XF-280* IceCap Gyre 1K, 3K, 2K, 4K Reef Octopus RODC-2500, 3500 and 5500, VarioS-2 and 4, Octo Pulse 2 and 4 0-10V Input ControlRECIEVE commands from other devices, including push buttons, float switches, plus much more.Here Is What WELE Can Do One App to Rule Them All! The HYDROS App from CoralVue will completely replace the need for individual manual controllers and apps. We can easily tap into the native control platform to access all the preset flow patterns and modes or create our own through modern technology! Connect wirelessly to the HYDROS WaveEngine and then communicate with your flow pumps.Features Easily add pumps and specify the location of the pump in the aquarium as well as specify min & max speed a pump can run at Use different brand pumps to work together in different flow preset such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Create multiple groups Create and access operational modes such as Feed, Water Change, or Night mode Monitor power consumption (volts, amps & watts) based on individual pumps & total consumption of all attached pumps Monitor pump's RPM to ensure maximum performance Full cloud connectivity so you can control your pumps from anywhere in the world Real-time notifications of system status & pump performance Define custom flow patterns of any duration up to 24 hours with 1/1000 second accuracy Power up to 2 pumps with the Direct Drive ports using a single 100/240V 4 amp input power supply (included). The output is 24V/6 amps.
*Maxspect Gyre 280 pumps can only run at 75% max intensity. **An appropriate pump adapter **PLEASE NOTE: An appropriate pump adapter or 0-10V cable (sold separately) is required to connect pumps directly to the HYDROS WaveEngine LE. Kit includes 2K Gyre Pump, power supply and Dual Gyre Pump WiFi Controller
IceCap Bio Sphere Media Tower The IceCap Bio-Sphere Media Tower is a simple structure that allows the stacking of five Bio-Sphere Balls on each of its nine support rods to provide a more visually pleasing way of containing up to 45 total bio-sphere biological media. The stacking of the media will increase filtration efficiency when compared to placing the media in a detritus-collecting mesh bag in the sump. Bio-Sphere media are sold separately and designed to work with IceCap, Maxspect, and Mantis Nano-Tech Bio-Sphere media, all sold separately. Specifications of the IceCap Bio Sphere Media Tower Dimensions: 4.3 x 4.3 x 7.45in (LxWxH) Holds Up To: 45 Bio-Spheres (1kg capacity) SOLD SEPARATELY Color: Black Base with Clear Acrylic Rods
IceCap AIO-240 Protein Skimmer If you have an all-in-one aquarium that's between 20-65 gallons, the IceCap AIO 240 Protein Skimmer is a great option. It has a slim profile and can be hung within the aquarium's dedicated filter chamber. You can also adjust the skimmer's height to get the desired amount of waste collection.This product is expertly made using durable, top-notch acrylic molding. Every part of it has been designed to ensure safety in marine environments and to deliver the most advanced foam fractionation technology with superior quality.When examining the IceCap's AIO 240 core, you'll discover the 12V DCair 400 skimmer pump that's intended to deliver reliable and efficient results. Adjusting the skimmer's collection output is a breeze thanks to the inline controller, which allows you to fine-tune the pump's speed. Specifications & Features of the IceCap All-In-One 240 Protein Skimmer Bioload Handling Heavy - 20 Gallons Medium - 45 Gallons Light - 65 Gallons Distinctive Square Body Adjustable Height Hanging Bracket Solid Construction Easy-to-lift Off Collection Cup Bubble Dispersant Chamber Novel Output Flow Efficient, Safe & Quiet DC Operation Disassembles for Easy Cleaning & Maintenance 1 Year manufacturers warranty IceCap AIO 240 Skimmer Pump Specifications DCAIR-400 DC Pinwheel Pump Power Consumption: 6watts PSU Model: 1210 Output: 12V/1A Air Draw: 150lph / 5.25SCFH* Water Draw: ~53gph *Air and water results will vary depending on the aquarium setup.
IceCap Algae Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank in the process.This all-natural form of water filtration can reduce and even eliminate the need for water changes. Best of all, algae scrubbers are safe for use in freshwater, saltwater, and reef aquarium systems.How it WorksIceCap Algae Scrubbers are designed to be mounted above your sump so that the water flowing through the unit can drain back into your normal filtration system. Water can be fed into the scrubber by a standalone pump, via a manifold, or through the drain of your display tank. The water going into the unit is trickled down onto a screen that is illuminated on both sides by powerful full-spectrum LED lights. As algae begins to grow on the screen, it "scrubs" your aquarium water of excess nutrients - so you'll have less algae growing inside your tank. Once the screen is covered in algae, you "harvest" it by removing a sizable portion, thereby removing the contaminants that fueled its growth from your system.IceCap vs Other BrandsUntil now, hobbyists looking to setup an algae scrubber would either build one themselves or invest in one of the very expensive units currently available on the market. The problem with doing it yourself (DIY) is that not everyone is capable or willing and the materials may be unsafe in a wet and humid environment. Using a commercially available scrubber solves the safety issue, but the high costs of these units has historically been prohibitive for getting more hobbyists to adopt this effective form of natural water filtration. Our goals in building the IceCap Algae Turf Scrubbers were to make them safe, easy-to-use, and most of all, affordable. You aren't going to find a more affordable waterfall-style algae scrubber than an IceCap ATS! Not only are units from other brands more expensive, some companies will try to up-sell you another $60 for a "light shield" to prevent the bright lights from the scrubber from escaping and shining into your sump or living space. Not IceCap! Our scrubbers are already enclosed to stop light bleed. You don't have to remove a bulky light shield to harvest your algae, either. Just flip open the hinged door on top to access the algae screen when it comes time for maintenance.How to Harvest AlgaeFlip open the door on top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them under water in the sink. You can use a soft bristle toothbrush to remove stubborn buildup. Be careful not to remove all of the algae from the screen as this will slow growth when you put it back into your system. Leave some algae behind to seed the next batch so that it will grow faster. Under normal circumstances, you will be harvesting algae every 1-3 weeks.When to run you ScrubberMany hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH of your aquarium water. You can accomplish this by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of your display tank lighting.Emergency Drain FittingIceCap Algae Turf Scrubbers are equipped with an emergency drain fitting in case the main drain ever gets clogged with algae.IceCap Algae Turf Scrubber - Medium 60W Specifications Dimensions: 16 x 10 x 12in (LxWxH) LED Lamp Number: 2 Wattage: 60w Inlet Size: 16mm Outlet Size: 1in Recommended Flow: 500gph Tank Rating: Aquariums up to 225gal
Magnetic Aquarium Heater Mount The IceCap Magnetic Heater Mount securely holds your aquarium heater(s) in place with strong magnets, preventing the possibility of the heater resting against equipment, causing it to overheat or worse, float out of the water and run dry.
The heater mount holds heaters up to 3/8in in diameter and slides into the circular cutouts. It gently holds the heater element while also providing valuable space between surfaces for proper heat dissipation. The magnetic mounts allow for easy removal and maintenance when necessary. They are also completely sealed on the wet and dry side, keeping the system 100% aquarium inhabitant safe!
Magnetic Aquarium Heater Mount The IceCap Magnetic Heater Mount securely holds your aquarium heater(s) in place with strong magnets, preventing the possibility of the heater resting against equipment, causing it to overheat or worse, float out of the water and run dry.
The heater mount holds heaters up to 3/8in in diameter and slides into the circular cutouts. It gently holds the heater element while also providing valuable space between surfaces for proper heat dissipation. The magnetic mounts allow for easy removal and maintenance when necessary. They are also completely sealed on the wet and dry side, keeping the system 100% aquarium inhabitant safe!
ULTRA Compact Protein SkimmerThe IceCap K1 NEO is an ultra-compact skimmer that offers a new level of refined filtration for marine aquariums ranging from 5 to 15 gallons. All aspects of the skimmer were designed to surpass many challenges other skimmers on the market miss out on. Ideal skimmer for those small all-in-one aquatic systems with filtration in the back overflow. Compact & Built-to-LastMaster crafted from robust PVC and high-quality acrylic. All components are marine safe and refined in every aspect to provide the latest enhancements in foam fractionation and the highest in quality.An impressively compact footprint makes it the ideal candidate for tight compartment applications. Can be placed directly into a nano tank overflow or display aquarium and it mounts directly to the side of the glass or acrylic and secures with a thumbscrew. Quiet Performance & ControlAt the Core of the IceCap K1, you will find the DCair 200 skimmer pump built to provide efficient performance.The pipeless output offers fine-tuning and trouble free underwater outflow plus quiet operation. Our pipeless design not only saves on space but also allows the outgoing water to exit on the side of the skimmer and below the water surface providing splash-free circulation in the sump.Bioload HandlingThe bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system. All values below are exluding sump. Heavy Bioload - 5 gallons Medium Bioload - 10 gallons Light Bioload - 15 gallons
K1-Nano Technical SpecsSkimmer Body: 1.98inFootprint: 2.6in x 2inTotal Height: 9.8inPump InformationDCair 200 Pinwheel PumpPower Consumption: 5wattsAir Draw: 100lph / 3.5scfh*Water Draw: 26gph*Air and water results will vary depending on aquarium setupWARRANTY CoralVue, Inc. and IceCap hereby guarantee this product to be free from defects in material and workmanship for a period of: 1 Year Warranty is activated on the date of purchase. This Standard Limited Warranty applies and is limited as follows: To the product only as long as it remains in the possession of the original purchaser. To the product that has not been subject to accident, misuse or abuse. To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc. That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent. That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time. Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect,secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
The IceCap Frag Transport Container is the perfect way to commute coral frags safely from one location to another. It is the ideal companion to bring with you on trips to your local fish store, frag swap, club meeting, or aquarium show!Hold Up to 8 Frags - Even If They Have Different Sized Plugs!The IceCap Transport Container is a water-tight container that holds up to 8 coral frags. Inside the container sits a round frag rack with 8 cut-outs to hold your frags. Each cut-out has a special membrane inside to lock your frags in place. In the center of the frag rack is a post with a handle on top so you can easily lift and lower the rack into the carrier without getting your hands wet. The post and flat-handle top also keep the rack from moving around inside the carrier. The rack itself does not rest on the bottom of the carrier. There are feet on the bottom so your plugs have space to slide in and stay put instead of getting pushed back up and out of the tray.The IceCap Coral Frag Transport Container has a screw-on gasket sealing lid to lock your corals safe inside so you won't have to ever worry about leaks. Each hole is numerically labeled so you can keep track of what type of coral is in each position. Another benefit of the membranes inside the plug holders is that they are able to accommodate a variety of different sized frag plugs. We have all had that experience of buying a coral that comes on a plug that won't fit in our frag rack. With these special membranes, you won't have that problem with the IceCap Coral Frag Transport Container. The IceCap Frag Transport Container is a Perfect Coral Dipping StationThe Coral Frag Transport Container is a versatile frag transport system. Not only can you safely bring corals with you when you travel, but the carrier itself lends itself perfectly for dipping and acclimating new corals once you get home. You can use the carrier to bathe and disinfect new corals with coral dip before introducing them to your aquarium. You can even quarantine an existing frag from your system inside the carrier to cleanse it if you suspect or observe pests or disease.What's Included Frag transport container Frag tray Specifications Dimensions: 4.84" (123mm) wide x 3.5" (88mm) high Volume; 0.28 Gallons / 1.05 Litres
IceCap UV Sterilizer - 40 Watt The IceCap UV sterilizer can be used on saltwater, freshwater, and ponds to help control and even eradicate parasites, algae, fungi, bacteria, and protozoa without any harmful chemicals or biocides! When properly installed, maintained, and operated, the high-output UV light in the sterilizer can effectively eliminate free-floating microorganisms. Features of the IceCap High Output UV Sterilizers Secure mounting brackets included Optional molded hose barbed fittings for easy installation with 1/2", 3/4" or 1" flexible hose and can be trimmed to fit for maximum flow capacity Can be plumbed using standard PVC fittings Kills most suspended bacteria and viruses in the water column when run at proper flows for sterilization* Improve redox balance in the aquarium or pond Aids in the control of parasites by reducing numbers and improving the immune function of aquatic life IceCap 40W UV Sterilizer Specifications Wattage: 40 Watts Lamp Length: 15.75 Inches Power Draw: 800ma UVC Output (uW/cm2): 105 Inlet/Outlet Size: 2 Inches Max Flow Rate (Marine): 1000gph Max Flow Rate (Freshwater): 3000gph Max Marine Aquarium Size Recommended: 400 gallons Max Freshwater Aquarium Size Recommended: 3000 gallons Dimensions: 22" x 5.25" x 6"
IceCap Algae Scrubber Pro - Small IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro Internal Turf Scrubbers Plug & Play - No Plumbing Necessary Feed Pump Included Adjustable Height for Sumps between 4in and 10in Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve Small Ice Cap Internal Algae Scrubber Pro Specifications Dimensions (LxWxH): 10.8 x 6.15 x 17in (LxWxH) Screen Size: 8.5 x 6in LED Number: 2 x 6W LED Wattage: 12w / DC24V Feed Pump: EVO-1000 (20w) Water Depth: 4 - 10in Max Flowrate: 250gph Aquariums up to: 100gal How the Internal IceCap Turf Scrubber Works IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights.As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap Internal Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
Simplify & automate the addition of calcium hydroxide with the IceCap Kalk Mixer!The IceCap Kalk Mixer is a dedicated reactor for mixing calcium hydroxide (Kalkwasser) solution to ensure maximum concentration with each dose to your aquarium and eliminates the need for frequent manual mixing.A clever magnetic mixer means no more pesky powerheads to clean and replace frequently. The intelligent design makes maintenance a breeze and the slim profile allows for easy placement under your tank and integration with your existing ATO system.BenefitsUsing Kalkwasser to supplement the aquarium with calcium and carbonates is one of the most efficient and economic methods and has been used successfully on reef aquariums for many years. The Kalkwasser powder is relatively inexpensive, is super concentrated and can simply be mixed into your top-off water. Additionally, the elevated pH of the resulting kalkwasser solution and CO2 reducing properties help to maintain a more desirable and stable pH of 8.3 inside your tank.The use of the IceCap Kalk Mixer will ensure maximum concentration with each dose to your aquarium and reduce the need for frequent manual addition and mixing of the solution. How it WorksSimply connect the IceCap Kalk Mixer to any freshwater reservoir with the use of an Auto Top Off unit or dosing pump. Kalkwasser powder is then added to the mixing chamber via the handy quick-fill cap. The adjustable speed motor should then be attached to a timer or controller and set to periodically mix the solution inside the reactor a few times per day.When freshwater is pumped from your ATO reservoir into the reactor, the freshly mixed and highly concentrated Kalkwasser solution is pushed out and into your aquarium.When adding kalkwasser to any aquarium, it is best to use a pump with a slow flow rate. Due to the high pH of the solution, you must add kalkwasser slowly and in small amounts, typically multiple times per day. Most ATO systems on the market will fit the flow rate needs of the reactor very nicely because of the small and frequent dosages of freshwater. MaintenanceOnce every two weeks, the kalkwasser powder in the reactor will need to be replenished and thanks to the quick-fill cap, the process is painless and mess-free. The entire reactor vessel only needs to be rinsed out completely once per month to dispose of precipitates and make room for fresh Kalkwasser powder.Note: Kalk Mixer motor is not suitable for continuous use and should not be run constantly. Necessary ATO system, calcium hydroxide (kalkwasser), dosing pump and timer/controller are required and sold separately. Reactors are not submersible. Features Adjustable speed magnetic mixer Solid PVC and acrylic construction Compact profile easily fits under your tank Reactor vessel detaches from base for easy maintenance Push-fit tubing connectors Convenient quick-fill cap for mess free Kalkwasser addition Sealed airtight environment preserves solution potency Gravity drain design ensures reliable performance Specifications Footprint: 5.7" x 5.7" Body Diameter: 5" Height: 25" Holding Capacity: ~1gal Ideal for aquariums up to 100 gallons
IceCap UV Sterilizer - 27 Watt The IceCap UV sterilizer can be used on saltwater, freshwater, and ponds to help control and even eradicate parasites, algae, fungi, bacteria, and protozoa without any harmful chemicals or biocides! When properly installed, maintained, and operated, the high-output UV light in the sterilizer can effectively eliminate free-floating microorganisms. Features of the IceCap High Output UV Sterilizers Secure mounting brackets included Optional molded hose barbed fittings for easy installation with 1/2", 3/4" or 1" flexible hose and can be trimmed to fit for maximum flow capacity Can be plumbed using standard PVC fittings Kills most suspended bacteria and viruses in the water column when run at proper flows for sterilization* Improve redox balance in the aquarium or pond Aids in the control of parasites by reducing numbers and improving the immune function of aquatic life IceCap 27W UV Sterilizer Specifications Wattage: 27 Watts Lamp Length: 11.3 Inches Power Draw: 800ma UVC Output (uW/cm2): 75 Inlet/Outlet Size: 2 Inches Max Flow Rate (Marine): 600gph Max Flow Rate (Freshwater): 1500gph Max Marine Aquarium Size Recommended: 140 gallons Max Freshwater Aquarium Size Recommended: 1300 gallons Dimensions: 17.75" x 5.25" x 6"
IceCap All In One Glass Aquarium - 20 Gallon IceCap All-In-One Aquariums are handmade with high-quality materials. Front and side viewing panels feature Low-Iron glass for optimal clarity and help showcase your tank inhabitants' color best. The built-in spacious filtration compartments allow you to customize your filtration fully. Specifications of the IceCap All In One 20 Gallon Aquarium Tank Dimensions: 18 x 18 x 16in (LxWxH) Glass Thickness: 6mm Low Iron Pre-Filter Chamber Dimensions: 3.2 x 3.2 x 15in (LxWxH) Filter Chamber Dimensions: 8.2x 3.2 x 15in (LxWxH) Pump Chamber Dimensions: 3.75 x 3.2 x 15in (LxWxH) Included Filtration: Mesh 200M Filter Sock Return Pump: ~265GPH (1000LPH) What's Included with your New IceCap 20 Gallon AIO Aquarium All-In-One Glass Aquarium Return Pump Plumbing Sock Pre-filter Self-leveling Mat (pre-installed)
IceCap AIO-120 Protein Skimmer If you have an all-in-one aquarium that's between 10-30 gallons, the IceCap AIO 120 Protein Skimmer is a great option. It has a slim profile and can be hung within the aquarium's dedicated filter chamber. You can also adjust the skimmer's height to get the desired amount of waste collection.This product is expertly made using durable, top-notch acrylic molding. Every part of it has been designed to ensure safety in marine environments and to deliver the most advanced foam fractionation technology with superior quality.When examining the IceCap's AIO 120 core, you'll discover the 12V DCair 200 skimmer pump that's intended to deliver reliable and efficient results. Adjusting the skimmer's collection output is a breeze thanks to the inline controller, which allows you to fine-tune the pump's speed. Specifications & Features of the IceCap All-In-One 120 Protein Skimmer Bioload Handling Heavy - 10 Gallons Medium - 20 Gallons Light - 30 Gallons Distinctive Square Body Adjustable Height Hanging Bracket Solid Construction Easy-to-lift Off Collection Cup Bubble Dispersant Chamber Novel Output Flow Efficient, Safe & Quiet DC Operation Disassembles for Easy Cleaning & Maintenance 1 Year manufacturers warranty IceCap AIO 120 Skimmer Pump Specifications DCAIR-200 DC Pinwheel Pump Power Consumption: 5watts PSU Model: 1205 Output: 12V/.5A Air Draw: 100lph / 3.5SCFH* Water Draw: ~26gph *Air and water results will vary depending on the aquarium setup.
IceCap Algae Scrubber Pro - Medium IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro Internal Turf Scrubbers Plug & Play - No Plumbing Necessary Feed Pump Included Adjustable Height for Sumps between 4in and 10in Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve Medium Ice Cap Internal Algae Scrubber Pro Specifications Dimensions (LxWxH): 12.5 x 6.15 x 21in (LxWxH) Screen Size: 11.8 x 7.4in LED Number: 2 x 12W LED Wattage: 24w / DC24V Feed Pump: EVO-1000 (20w) Water Depth: 4 - 10in Max Flowrate: 500gph Aquariums up to: 225gal How the Internal IceCap Turf Scrubber Works IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights.As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap Internal Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap All In One Glass Aquarium - 10 Gallon IceCap All-In-One Aquariums are handmade with high-quality materials. Front and side viewing panels feature Low-Iron glass for optimal clarity and help showcase your tank inhabitants' color best. The built-in spacious filtration compartments allow you to customize your filtration fully. Specifications of the IceCap All In One 10 Gallon Aquarium Tank Dimensions: 14 x 14 x 14in (LxWxH) Glass Thickness: 5mm Low Iron Pre-Filter Chamber Dimensions: 3.2 x 3.2 x 13.4in (LxWxH) Filter Chamber Dimensions: 5 x 3.2 x 13.4in (LxWxH) Pump Chamber Dimensions: 3.75 x 3.2 x 13.4in (LxWxH) Included Filtration: Mesh 200M Filter Sock Return Pump: ~180GPH (700LPH) What's Included with your New IceCap 10 Gallon AIO Aquarium All-In-One Glass Aquarium Return Pump Plumbing Sock Pre-filter Self-leveling Mat (pre-installed)
IceCap Algae Scrubber Pro - Large IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro Internal Turf Scrubbers Plug & Play - No Plumbing Necessary Feed Pump Included Adjustable Height for Sumps between 4in and 10in Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve Large Ice Cap Internal Algae Scrubber Pro Specifications Dimensions (LxWxH): 16.5 x 6.15 x 21in (LxWxH) Screen Size: 15.8 x 10.5in LED Number: 2 x 15W LED Wattage: 30w / DC24V Feed Pump: EVO-2000 (30w) Water Depth: 4 - 10in Max Flowrate: 800gph Aquariums up to: 350gal How the Internal IceCap Turf Scrubber Works IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights.As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap Internal Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap External Algae Scrubber Pro - Small IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro External Turf Scrubbers Feed Pump and Hose Included* Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve *For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Small Ice Cap External Algae Scrubber Pro Specifications Dimensions (LxWxH): 7 x 8.7 x 11.8in (LxWxH) Screen Size: 8.5 x 6in LED Number: 2 x 6W LED Wattage: 12w / DC24V Feed Pump: EVO-1000 (20w) Output Size: 1" Slip PVC Overflow Protection Drain Size: 1/2" Slip PVC Max Flowrate: 250gph Aquariums up to: 100gal How the External IceCap Turf Scrubber Works IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap External Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap External Algae Scrubber Pro - Large IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro External Turf Scrubbers Feed Pump and Hose Included* Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve *For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Large Ice Cap External Algae Scrubber Pro Specifications Dimensions (LxWxH): 16.5 x 8.7 x 12.6in (LxWxH) Screen Size: 15.8 x 10.5n LED Number: 2 x 15W LED Wattage: 30w / DC24V Feed Pump: EVO-2000 (30w) Output Size: 1.5" Slip PVC Overflow Protection Drain Size: 1" Slip PVC Max Flowrate: 800gph Aquariums up to: 350gal How the External IceCap Turf Scrubber Works IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap External Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap External Algae Scrubber Pro - Medium IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes. Features of the Ice Cap Pro External Turf Scrubbers Feed Pump and Hose Included* Naturally Combats Nutrients and Algae Issues Easy to Harvest and Maintain Integrated Internal 24V LED Lights Emergency Overflow Protection Durable Acrylic Construction Multi-Directional Input with Valve *For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Medium Ice Cap External Algae Scrubber Pro Specifications Dimensions (LxWxH): 12.6 x 8.7 x 12.6in (LxWxH) Screen Size: 11.8 x 7.4in LED Number: 2 x 12W LED Wattage: 24w / DC24V Feed Pump: EVO-1000 (20w) Output Size: 1" Slip PVC Overflow Protection Drain Size: 1/2" Slip PVC Max Flowrate: 500gph Aquariums up to: 225gal How the External IceCap Turf Scrubber Works IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system. How to Harvest Algae from your IceCap External Turf Scrubber Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks. When to Run Your Ice Cap Algae Scrubber Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
