Neptune Magnetic Optical Sensor
Overview
The Neptune Magnetic Optical Sensor replaces the optical sensor with magnet and offers an improved look, feel, and magnetic design that also lends itself to help prevent water incursion into the sensor.
The MOS plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet.
This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more. The sensors can be mounted into custom brackets or through a hole in a vessel.
Included with the Neptune MOS are a fastening nut and silicone washer.
Neptune Optical Multi-Surface Leak Sensor
Overview
New to the leak detector offerings for your Neptune Apex is the Optical Multi Surface Leak Sensor (LD-3). This is a weighted sensor that is an improved sensor and design over our Solid-Surface Leak Sensor (LD-2).
An epoxied design that prevents water incursion into the sensor circuitry. This allows the sensor to be utilized over and over despite how often it becomes activated and wet.
Utilizing an optical sensor allows the sensor to be placed on any surface including metal and epoxied cement floors without a false activation.
This LD-3 Leak Sensor requires an open FMM module port in order to work with your Apex aquarium controller.
Red Sea Reef ATO+ Reefer Upgrade Kit
Exceptionally reliable and smart ATO, temperature monitor and leak detector
Overview
The Red SeaReefATO+ is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. In addition, the ReefATO+ provides two other critical aquarium health indicators: a fully featured on-line digital temperature monitor and a leak detector.
How ATO Works
The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity. The ATO+ includes the added safety feature of an l-proof (solid-state EC technology) water level sensor with built-in safety shutoff. Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected.
Components Red Sea 3-in-1 ReefATO+
ATO Sensor - Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1" above the normal pump-OFF point. The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times.
ATO PumpQuiet, variable flow, 12 vdc ATO pump. Cylindrical design with diameter of 4.5cm / 1.8" to fit inside standard jerrycans. Max flow rate 300 lph / 75 gph, Max head 2.5m / 8', power 6-10W. Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry. Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump. The noise damping rubber impeller chamber cover and impeller can be removed for pump maintenance. Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing.
Leak Detector - The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater. If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device. Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Temperature Sensor - The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of +/-0.1F. The ReefBeat App allows you to set a narrow "desired" temperature range, and a slightly wider "acceptable" range, that will be seen on- line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone. The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days.
Smart Controller - The micro-processor monitors and reliably controls all of the components and connects them to the ReefBeat eco-system.
ReefATO+ Complete Installation Kit
3M / 10' - 1.5mm / 1/16" thick silicone tubing ID 5mm / 0.2"
Silent flow - Tube holder, clips on 4 - 12mm / 1/2" glass
Siphon breaker
Note: If you have a Red Sea Reefer already, save some money and purchase this upgrade kit. It does not include the magnets and bracket needed to holder the sensor that other non Red Sea systems may require.
Red Sea Reef ATO+ System
Exceptionally reliable and smart ATO, temperature monitor and leak detector
Overview
The Red SeaReefATO+ is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. In addition, the ReefATO+ provides two other critical aquarium health indicators: a fully featured on-line digital temperature monitor and a leak detector.
How ATO Works
The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity. The ATO+ includes the added safety feature of an l-proof (solid-state EC technology) water level sensor with built-in safety shutoff. Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected.
ATO Sensor - Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1" above the normal pump-OFF point. The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times.
ATO PumpQuiet, variable flow, 12 vdc ATO pump. Cylindrical design with diameter of 4.5cm / 1.8" to fit inside standard jerrycans. Max flow rate 300 lph / 75 gph, Max head 2.5m / 8', power 6-10W. Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry. Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump. The noise damping rubber impeller chamber cover and impeller can be removed for pump maintenance. Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing.
Leak Detector - The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater. If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device. Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps.
Temperature Sensor - The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of +/-0.1F. The ReefBeat App allows you to set a narrow "desired" temperature range, and a slightly wider "acceptable" range, that will be seen on- line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone. The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days.
Smart Controller - The micro-processor monitors and reliably controls all of the components and connects them to the ReefBeat eco-system.
ReefATO+ Complete Installation Kit
Sensor holder and magnetic corner mounting bracket for 12mm (1/2") glass. This is suitable for all non-red sea aquariums and allows you to virtually mount in any system.
3M / 10' - 1.5mm / 1/16" thick silicone tubing ID 5mm / 0.2"
Silent flow - Tube holder, clips on 4 - 12mm / 1/2" glass
Siphon breaker
Note: If you are using the ReefATO+ on a Red Sea Reefer, you can save some money and purchase the upgrade kit. It does not include the magnets and bracket needed to holder the sensor that other non Red Sea systems may require.
Red Sea ReefDose 2
Overview
The Red Sea ReefDose is designed and built specifically for the daily supplementing of reef aquariums.
ReefDose uses bespoke (patent-pending) single-drop-accuracy dosing heads together with an advanced controller that provides a full suite of features.
The "Dynamic Dosing Queue" run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages.
With programming through the ReefBeat App, ReefDose offers multiple options for fully automated, easy-set dosing, or a simple schedule of individually planned doses.
In addition to the regular flow rate, you can select the "Whisper" mode for almost silent operation, or "Turbo" mode if you want to get the dosing done as quickly as possible.
The ReefDose is part of Red Sea's ReefBeat smart ecosystem, seamlessly integrating with all other ReefBeat devices
Features
Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of +/- 0.05ml or an average deviation of 0.5% (over 10ml).
4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule for the complete device.
Easy assembly click-on/off dosing heads (no tools or alignment required).
Automatic delay between the heads to prevent chemical interaction between supplements.
Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml.
On-demand manual dosing.
Secured connectors for flexible tubing: OD 5mm - ID 3mm.
3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min.
Motor life expectancy of 10 years - based on 250ml/day/head.
Specifications
Reef Dose 2 Dimensions: 5.1" x 4.1" (13cm x 10.5cm)
Reef Dose 4 Dimensions: 8.9" x 4.1" (22.5cm x 10.5cm)
Wall mounting bracket included.
Red Sea ReefDose 4
Overview
The Red Sea ReefDose is designed and built specifically for the daily supplementing of reef aquariums.
ReefDose uses bespoke (patent-pending) single-drop-accuracy dosing heads together with an advanced controller that provides a full suite of features.
The "Dynamic Dosing Queue" run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages.
With programming through the ReefBeat App, ReefDose offers multiple options for fully automated, easy-set dosing, or a simple schedule of individually planned doses.
In addition to the regular flow rate, you can select the "Whisper" mode for almost silent operation, or "Turbo" mode if you want to get the dosing done as quickly as possible.
The ReefDose is part of Red Sea's ReefBeat smart ecosystem, seamlessly integrating with all other ReefBeat devices
Features
Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of +/- 0.05ml or an average deviation of 0.5% (over 10ml).
4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule for the complete device.
Easy assembly click-on/off dosing heads (no tools or alignment required).
Automatic delay between the heads to prevent chemical interaction between supplements.
Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml.
On-demand manual dosing.
Secured connectors for flexible tubing: OD 5mm - ID 3mm.
3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min.
Motor life expectancy of 10 years - based on 250ml/day/head.
Specifications
Reef Dose 2 Dimensions: 5.1" x 4.1" (13cm x 10.5cm)
Reef Dose 4 Dimensions: 8.9" x 4.1" (22.5cm x 10.5cm)
Wall mounting bracket included.
Red Sea ReefDose Accessory Kit - Blue/Green
An accessory kit your .
Overview
Everything required to connect a dosing pump in one convenient kit. Available in 2 color versions providing 8 unique colors for easily identifying a full range of supplements from container to dosing tip.
Each ReefDose Accessory Kit Contains:
Air-resistant TPE colored tubes
12m / 40' tubes (4 colors - 3m/10' each)
Tube holder with 4 quick connect tips
Snap-open tube organizer (3 units)
Red Sea ReefDose Accessory Kit - Red/Yellow
An accessory kit your .
Overview
Everything required to connect a dosing pump in one convenient kit. Available in 2 color versions providing 8 unique colors for easily identifying a full range of supplements from container to dosing tip.
Each ReefDose Accessory Kit Contains:
Air-resistant TPE colored tubes
12m / 40' tubes (4 colors - 3m/10' each)
Tube holder with 4 quick connect tips
Snap-open tube organizer (3 units)
Red Sea ReefDose Head Tube
Overview
Replacement head tube assembly with barbs for all Red Sea ReefDose aquarium dosers.
Manufacturer Part number: R35344
Slide-out Control Panel Ideal for reef aquarium devicesDesigned with hobbyist needs in mind, Red Sea's new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place.The Control Panel is designed to fit either side of your cabinet, and is made of marine-spec laminated plywood with quick-release stainless steel soft-close sliders, allowing for easy mounting and access to all your equipment. Features & Specifications Marine-spec, 2 cm (0.8") thick, black laminated plywood panel. Mounts on both left or right sides. Quick-release stainless steel soft-close sliders. Mounting brackets provide 3 cm (1.2") clearance for hinges. Available in two sizes: 25 cm (9.8") x 45 cm (17.7") 60 cm (23.6") x 50 cm (19.7") Control Panel 25 Minimum Cabinet Internal Depth: 46cm (18.1")Control Panel 60 Minimum Cabinet Internal Depth: 51cm (20")
Slide-out Control Panel Ideal for reef aquarium devicesDesigned with hobbyist needs in mind, Red Sea's new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place.The Control Panel is designed to fit either side of your cabinet, and is made of marine-spec laminated plywood with quick-release stainless steel soft-close sliders, allowing for easy mounting and access to all your equipment. Features & Specifications Marine-spec, 2 cm (0.8") thick, black laminated plywood panel. Mounts on both left or right sides. Quick-release stainless steel soft-close sliders. Mounting brackets provide 3 cm (1.2") clearance for hinges. Available in two sizes: 25 cm (9.8") x 45 cm (17.7") 60 cm (23.6") x 50 cm (19.7") Control Panel 25 Minimum Cabinet Internal Depth: 46cm (18.1")Control Panel 60 Minimum Cabinet Internal Depth: 51cm (20")
Seaside Aquatics Dosing Container - 1.5 Liter
Overview
Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums.
Features
1.5 liter capacity is ideal for smaller aquariums
Solid acrylic construction
Standard 1/4" Tubing Connection
Dimensions: 12.5" High x 4.5" Diameter
Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Seaside Aquatics Dosing Container - 2.5 Liter
Overview
Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums.
Features
2.5 liter capacity is ideal for smaller aquariums
Solid acrylic construction
Standard 1/4" Tubing Connection
Dimensions: 14.5" High x 5" Diameter
Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Seaside Aquatics Dosing Container - 5.0 Liter
Overview
Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums.
Features
5 liter capacity is ideal for larger aquariums
Solid acrylic construction
Standard 1/4" Tubing Connection
Dimensions: 16" High x 6.25" Diameter
Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Tunze Check Valve - 5074.010
Overview
Prevent reverse siphon and pump backflow with the Tunze 5074.010 non-return valve. The low-cracking silicone diaphragm maintains full flow yet seals instantly when flow stops, safeguarding sumps and ATO reservoirs.
Features
Low-pressure cracking opens at < 2 mbar
Silicone diaphragm safe for RO/DI and saltwater
Standard 4 × 6 mm Hosetail barbs fits Tunze dosing lines
Transparent housing for visual inspection
Tool-free disassembly for cleaning
Specifications
Barb size: 4 × 6 mm
Max pressure: 3 bar
Length: 45 mm
What's Included
Check Valve 5074.010
Tunze Osmolator 3 ATO - 3154
Overview
The Tunze Osmolator 3 maintains stable salinity with a precise optical level sensor plus an independent thermal safety sensor. It is plug and play, mounts cleanly with strong magnets, and includes a high-head Turbelle High Jet 5030 dosing pump for reliable, quiet top off.
Features
Dual-sensor safety with optical control and thermal backup
Quiet 12 V operation and long-life dosing pump
Strong magnetic mounts for sensor and tube holder
Simple setup with proven default settings
Suitable for marine and freshwater systems
Specifications
Sensor mounting: up to 15 mm glass
Tube holder mounting: up to 22 mm
Pump: Turbelle High Jet 5030 Hmax 6.2 m
Typical delivery with 6 mm tube: ~120 L/h at 1.0 m
Power: 12 V DC (100–240 V supply included)
What's included with 3154
Optical level sensor with magnet holder
Independent thermal safety sensor
Turbelle High Jet 5030 pump
12 V power supply
PU hose and push in fitting
Tube holder
Tunze Osmolator Magnetic Mount - 3155.600
Overview
Upgrade any Tunze Osmolator with the 3155.600 Magnet Holder to secure both optical sensor and float switch on panes up to 12 mm. The dual-channel design tidies cables and positions sensors precisely for worry-free ATO operation.
Features
Holds optical sensor and backup float in one compact bracket
Strong neodymium magnets rated for ≤12 mm glass
Silicone stabilizer pads dampen vibration and slippage
Tool-free height adjustment for accurate refill level
ABS and stainless hardware resist saltwater corrosion
Specifications
Glass thickness: ≤12 mm
Footprint: 75 × 40 × 35 mm
Material: ABS, stainless inserts
What's Included
Magnet Holder 3155.600
Cable clip set
Tunze Osmolator Nano 3 ATO - 3151
Overview
The Tunze Osmolator Nano 3 is a compact single sensor ATO for tanks up to about 250 L. Its large optical sensor delivers precise level control, while the included high head pump and strong magnets make installation clean and dependable.
Features
Accurate optical level sensing with plug and play setup
Two selectable maximum dosing durations to match tank size
Quiet 12 V pump with dry run and blockage protection
Strong magnetic mounts for sensor and tube holder
Specifications
Recommended system size: up to ~250 L
Sensor mount: up to 12 mm glass
Tube holder mounting: up to 22 mm
Pump: Turbelle High Jet 5030 max delivery height ~3 m
Power: 12 V DC (supply included)
What's included with 3151
Optical level sensor with magnet holder
Turbelle High Jet 5030 pump
12 V power supply
3 m PU hose
Tube holder
Tunze Osmolator Nano Controller - 4017
Overview
The 4017 Controller is a direct replacement brain for the Osmolator Nano. It continuously samples the capacitive level sensor, runs the 12 V pump in safe timed bursts, and includes an audible alarm for overfill or dry-run events.
Features
Microcontroller logic with factory-preset safety timers
LEDs indicate power, pump active, and alarm status
Plugs directly to Nano sensor and DC pump harness
Low-voltage 12 V design for cabinet safety
Self-test routine on power-up
Specifications
Operating voltage: 12 V DC
Relay rating: 1 A
Dimensions: 80 × 55 × 25 mm
What's Included
Controller 4017 module
Mounting Velcro
Tunze Osmolator Replacement Controller - 5017
Overview
Restore full functionality to your 3155 Osmolator with the 5017 Controller. It orchestrates optical sensor, float backup, and ATO pump with redundant timers and audible alarms for bulletproof top-off management.
Features
Dual-sensor logic with optical primary and float backup
Failsafe pump-run timer and overflow alarm buzzer
LED indicators for sensor wet/dry and pump status
Plug-and-play harness for quick swap-out
12 V low-voltage enclosure
Specifications
Compatibility: Tunze 3155 Osmolator
Power input: 12 V DC
Dimensions: 80 × 55 × 25 mm
What's Included
Replacement Controller 5017
Mounting Velcro
Tunze RO Water Controller - 8555.000
Overview
The RO Water Controller 8555.000 automates reverse osmosis water top-off using conductivity measurement. Its digital interface displays real-time TDS and controls dosing pumps for precise salinity management in saltwater aquaria.
Features
Conductivity probe for TDS monitoring
Digital display with adjustable setpoints
Dual relay outputs for pump and alarm
Programmable delay and calibration functions
Compact DIN-rail mountable housing
Specifications
TDS range: 0–999 ppm
Relay rating: 5 A @ 230 V AC
Power: 12 V DC
Dimensions: 105×90×60 mm
What's Included
RO Water Controller unit
Conductivity probe
Power adapter
Mounting bracket
Tunze DOC Protein Skimmer - 9410
Overview
The DOC Skimmer 9410 is a quiet, energy-efficient in-sump skimmer for serious reef filtration. Its Hydrofoamer Silence 9410.040 produces high air volume with very low watt draw, while a patented anti-overfoaming system keeps performance stable without constant adjustment.
Key Features
Hydrofoamer Silence 9410.040: fine-bubble generation with ~600 L/h air and ~900 L/h water flow
Booster ring for precise wet/dry tuning
Removable 300 micron post-filter bag at outlet; can be filled with media like carbon or phosphate remover
Ozone connection nipple to enhance skimming and remove yellowing
Low noise design with stable base and bubble-free return
Specifications
Recommended tank size: up to 1,000 L (265 US gal)
Air intake: ~600 L/h
Water flow: ~900 L/h
Cup volume: ~0.7 L
Power consumption: ~11 W at 230 V (approx. 15 W at 115 V)
Immersion depth: ~140–240 mm (5.5–9.5 in)
Dimensions (L x W x H): 250 x 180 x 415 mm (9.8 x 7.0 x 16.3 in) without post-filter
What’s included with 9410
9410 skimmer body with booster ring
Hydrofoamer Silence 9410.040 (pre-installed)
Removable post-filter bag (300 micron)
Tunze Turbelle High Jet Osmolator Replacement Pump - 5000.021
Overview
The Turbelle High Jet 5000.021 is a quiet high head 12 V DC centrifugal pump for Osmolator systems. It provides strong lift for long runs or basement sumps and features integrated protection against reverse polarity dry run and blockage.
Features
Hmax 6.2 m for demanding routing
Works submerged or externally (flooded suction)
Compact long-life design
Standard threaded ports for easy plumbing
Includes hose and fitting for quick install
Specifications
Typical flow with 6 mm tube: ~120 L/h at 1.0 m ~100 L/h at 1.5 m ~83 L/h at 2.0 m
Threads: 1/2" suction 1/4" discharge
Supply: 12 V DC
Dimensions (L×W×H): ~78 × 41 × 41 mm
Compatibility: Osmolator 3155 and Osmolator nano 3152
What's included with 5000.021
High Jet 5000.021 pump
3 m PU hose
Push in fitting
Tunze Universal Osmolator Replacement Tube - 5000.390
Overview
The Universal Osmolator Tube 5000.390 is a replacement silicone delivery line for all Tunze Osmolators. Flexible and kink-resistant it ensures uninterrupted freshwater flow and easy routing behind tanks or cabinets.
Features
Food-grade silicone tubing for pure water delivery
Kink-resistant flexibility
Pre-cut length of 2 m for versatile installations
Compatible with all Tunze dosing pumps
Specifications
Length: 2 m
Inner diameter: 2 mm
Outer diameter: 4 mm
Material: silicone
What's Included
2 m silicone tube
XP Aqua ATO Replacement DC Pump
Head: 8.2 ft (250 cm)
Flow Rate: 74 gph (280 lph)
Power: 4.8 W @ 12 VDC
Lifetime: 20,000 hrs
Cable Length: 6 ft (180 cm)
DC Pump Connector: DC 5.5 x 2.5 mm Male
XP Aqua Duetto 2 Replacement Controller
Overview
Genuine replacement part for the XPAqua Duetto and Duetto 2 ATOs
Specifications
Power Input : 100-240 VAC, 50-60Hz
DC Output : 12 VDC / 1.0 A
Max. Mounting Thickness : 1/2" (12.7 mm)
Sensor Size (L x W x T) : 0.78" x 0.78" x 0.98" (20 mm x 20 mm x 25 mm)
Dry Side Magnet Size (L x W x T) : 0.78" x 0.78" x 0.31" (20 mm x 20 mm x 8 mm)
Length of Cable between Sensor and Controller : 6 ft (180 cm)
XP Aqua Duetto2 ATO System
Overview
With huge features jammed in a tiny package, the Duetto is the perfect ATO for your aquarium.
XPAqua's proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level constant, the two sensors also work in concert with the intelligent QST programming to help prevent overfilling.
All the installation parts are included and a magnetic coupling allows you to easily mount or adjust the dual-sensor. Installation takes just seconds so you can spend less time working on your aquarium and spend more time enjoying your aquarium.
Features
New - Controller programming & circuitry for added system protection
New - Improved sensor design for longer durability
World's smallest dual-sensor ATO
Two layers overfill protectionIntelligent QST programmingSecondary optical sensor
Super precise water level control
Super easy installation; plug-and-play
No programming or adjustments required
Works in complete darkness
Specifications
Power Input: 100~240VAC 50-60HZDC Pump: Head: 8.2ft (250cm) Flow Rate: 74 gph (280lph)
Max mounting thickness: 1/2" (12.7mm)
XP Aqua Flexi Reversible DC Pump
Head: 6.5 ft (200 cm)
Flow Rate: 74 gph (280 lph)
Power: 4.8 W @ 12 VDC
Lifetime: 20,000 hrs
Cable Length: 6 ft (180 cm)
DC Pump Connector: DC 5.5 x 2.5 mm Male
XP Aqua Sumpless ATO2
Overview
The XPAqua Sumpless ATO2 is the first and only ATOdesigned specifically for aquariums without sumps. The combination of the sleek overflow box and the innovative dual-optical sensor ATO will help to keep your aquarium topped off and your water crystal clear.
The overflow box easily mounts to any aquarium with its magnetic mount. It acts as a surface skimmer to rid your aquarium of undesirable oily surface skim and doubles as a media reactor for carbon, GFO or any media of your choice.
XPAqua's proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level constant, the two sensors also work in concert with the intelligent QST programming to help prevent overfilling.
With so many features never seen before in ATO's, the XPAqua Sumpless ATO2 is the ultimate ATO solution for aquariums without sumps.
Features
NEW! - Controller programming & circuitry for added system protection
NEW! - Improved sensor design for longer durability
Engineered Specifically for Aquariums without Sumps
Dual-Optical Sensor for Precise Operation with Secondary Failsafe
Intelligent Pre-Programmed Algorithm
Doubles as an Effective Surface Skimmer
Convenient Media Chamber for Filtration Media
Plug-and-Play with All Parts Included
Works in Complete Darkness
Specifications
Power Input: 100-240VAC 50-60HZFlexi Reversible DC Pump: Head: 6.5ft (200 cm) Flow rate: 74 gph (280 lph)
ATO DC Pump:Head: 8.2ft (250 cm) Flow rate: 74 gph (280 lph)
Flexi Overflow Box: 3.94" x2.17" x6.30" (100mm x55mm x160mm)
Max Volume of Media Chamber: 3.74" x1.99" x1.97" (95mm x50.5mm x50mm)
1-der Stick Ultra Media : 3.54" x1.5" x1.89" (90mm x38mm x48mm)
Max Mounting Thickness : ½" (12.7mm)
🚨 CANADA POST STRIKE🚨 Due to the strike, we are UNABLE to ship Livestock and Frozen food orders by UPS Express because of the increased volume on their system. Once the strike has ended, regular service will be resumed.
