Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump
Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump
Hurry up, only 2 items left in stock.
✓ This item is eligible for free shipping
Couldn't load pickup availability
Product Description
Product Description
Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump
The Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump is a high-precision continuous-duty peristaltic pump built for calcium reactor feed, controlled fluid transfer, and aquarium applications where stable flow matters. It combines a closed-loop stepper motor, onboard screen, Bluetooth and WiFi control through the Kamoer Remote app, calibration support, and memory backup for consistent day-to-day dosing or reactor operation.
Kamoer FX-STP3 Continuous-Duty Pump Overview
Built for stable continuous flow: The FX-STP3 is designed for applications where the pump may run for long periods rather than only short dosing bursts. This makes it especially useful as a calcium reactor feed pump, where small flow changes can affect effluent rate, reactor stability, alkalinity delivery, and overall reef chemistry control.
Local and remote control: The onboard display allows direct pump setup and monitoring, while Bluetooth and WiFi access through the Kamoer Remote app allow easier adjustment from a mobile device. This gives reef keepers more practical control over flow rate, calibration, and operating behaviour without relying only on manual valve adjustments.
Stepper-driven precision: The high-precision closed-loop stepper drive supports fine speed control and motor stall alarm protection. With 0.1 rpm speed resolution and a maximum flow rate of 150 mL/min at 350 rpm, the pump is suited to tasks where controlled metered flow is more important than high-volume transfer.
FX-STP3 Bluetooth and WiFi Features
- Closed-loop stepper drive: Provides precise motor control for stable flow and supports motor stall alarm protection.
- Continuous-duty design: Built for calcium reactor feed and other constant-flow aquarium applications.
- Bluetooth and WiFi control: Supports local and remote operation using the Kamoer Remote app.
- Onboard screen: Allows local setup, monitoring, and adjustment without relying only on a phone.
- Flow calibration: Helps match displayed output to real measured flow for better accuracy in the actual installation.
- Memory backup: Retains pump settings after power loss so operation can resume with the previous configuration.
- Fine speed adjustment: 0.1 rpm resolution allows careful tuning of reactor feed or fluid transfer rate.
- Serviceable tubing path: Pump tubing can be replaced as a normal wear item to maintain performance over time.
Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump Specifications
- Product type: Bluetooth and WiFi continuous-duty peristaltic pump
- Power supply: DC24V 2A power adapter
- Maximum power: 50W
- Motor type: Stepper motor
- Maximum speed: 350 rpm
- Speed regulation resolution: 0.1 rpm
- Maximum flow rate at 350 rpm: 150 mL/min
- Flow range: Up to 1500 mL/min listed by Kamoer technical data
- Motor life: 6000 hours or greater
- Reference noise value: 56 dB or less
- Pump tube size: 3.2 mm ID x 6.4 mm OD
- Weight: About 1145 g
- Working environment: 0 C to 40 C with relative humidity under 80% non-condensing
- Primary application: Calcium reactor feed and controlled aquarium fluid transfer
FX-STP3 Compatibility and Application Notes
Best matched to precision flow tasks: The Kamoer FX-STP3 Bluetooth & WiFi Peristaltic Pump is especially appropriate for calcium reactors and other aquarium systems that require steady metered flow. It is not a general high-volume return pump and should not be used where a centrifugal aquarium pump is required.
Calibration is important: Tubing length, head pressure, tubing wear, and reactor restriction can all affect real output. After setup, run the calibration routine using measured output so the app and pump display match the actual flow being delivered.
Protect the electronics: Install the pump in a dry, ventilated location away from splashes, salt creep, and condensation. Route tubing without sharp bends and use drip loops on power cables where appropriate.
Setting Up the Kamoer FX-STP3 Pump
Mount the pump securely in a dry location, connect the inlet and outlet tubing, and prime the line to remove trapped air. Pair the pump with the Kamoer Remote app using Bluetooth for local setup or WiFi for remote control. Set an initial flow rate, calibrate against measured output, and make small adjustments until the reactor effluent or dosing rate is stable. Replace pump tubing as a normal wear part and recalibrate after tubing changes.
What's Included
- 1 x Kamoer FX-STP3 peristaltic pump
- 1 x DC power adapter
- 1 x Silicone tube 6.4 mm x 9.6 mm for calcium reactor connection
- 1 x Silicone tube 3.2 mm x 6.4 mm
- 1 x Straight-through water pipe fitting 1/8 in to 1/4 in
- 1 x Barbed pump tubing assembly suitable for 3.2 mm x 6.4 mm hoses
- 1 x Product manual
Shipping Info
Shipping Info
FREE SHIPPING OVER $119!*
- does not apply to livestock -
$11.99 FLAT RATE FOR LESS THAN $119.00 - CANADA WIDE!
*EXCEPTIONS:
- Any heavy or bulky items will incur a 100% charge of the actual shipping cost (valid for both Canada and the US). Heavy bulky items include (but are not limited to): salt, dry rock, sand, chillers, sumps, aquariums, stands, and some filter media.
- Frozen or perishable food can only be shipped via UPS Express. We have discounted the express shipping of these items to help the hobbyist out.
- Livestock is covered by a different shipping policy. To view the policy and further information regarding shipping livestock, click here.
GENERAL NOTES:
- We always make our best effort to ship your order via the carrier chosen during the check-out process; however, for some multi-piece shipments and/or remote destinations, we must reserve the right to use another carrier at our discretion (and without prior notice). If you require notice of any changes made to the carrier, please mention it in the special instructions during check-out.
- Upon request, we will ship your dry goods as per your specifications (courier, airlines, on your account, etc.).
- Quoted rates are the carriers live discounted shipping rates after adjusting for any/all shipping promotions.
Returns / Exchanges
Returns / Exchanges
Return Policy — Aquarium Equipment & Supplies
- All returns and/or exchanges must be made within 30 days of receipt of product.
- Before returning or exchanging any goods, you must contact J&L Aquatics to obtain a Return Merchandise Authorization (RMA). Items returned without prior authorization will be declined.
- Returned items must be unused, in original packaging, in as-new condition, and in perfect sellable condition. All returns are subject to inspection upon receipt.
- A 15% restocking fee applies to all online returns. This fee includes the cost of outbound shipping.
- Customer is responsible for return shipping costs on standard returns.
- Order cancellations made before shipping are not subject to a restocking fee.
Non-Returnable Items
- Special order items
- Clearance / final sale items
- Open box items
Regular sale items (non-clearance) are returnable within the 30-day return window, subject to our standard return conditions.
Defective, Warranty & DOA Items
- If you receive an item that is defective, not working, or dead on arrival (DOA), please contact us as soon as possible.
- Confirmed defective and warranty returns have no restocking fee and no Affirm fee. Customer does not pay return shipping — J&L Aquatics will provide a prepaid return label.
- All defective claims are subject to inspection. Items showing signs of customer damage, improper installation, or misuse are not covered under warranty.
Carrier Damage & Lost in Transit
- If your order arrives damaged by the carrier or is lost in transit, please contact us right away with:Photos of the damaged product (if applicable)Photos of the damaged box/packaging (if applicable)A description of the issue
- Important — Do not throw out any packaging! Please keep all original packaging, boxes, and packing materials. These are required to process your claim. Discarding packaging may affect our ability to resolve your claim.
High-Value Items ($100+)
- For items valued at $100 or more, customers must provide a return tracking number before a replacement will be shipped.
Affirm & Financing Orders
- Affirm or similar financing orders that are cancelled or returned in-store are subject to a 5% service charge. This covers the processing fee charged to us by the financing provider.
- The Affirm service charge does not apply to confirmed defective or warranty returns.
J&L Aquatics strives to maintain the lowest prices economically possible. In most cases we have the lowest price in the Canadian marketplace, but in the rare occasion that we do not, please feel free to contact us at 604-444-1161 or through e-mail to discuss an opportunity to price match.
