Ice Pack - 8oz
Overview
This 8oz Ice Pack is reusable.
The leak-proof refrigerant gel stays colder than ice.
Freeze before use.
Ideal for keeping frozen food cold.
Great for transporting fish in hot weather
Dependable, durable and reusable.
Thick 4 mil poly.
FDA compliant.
Dimensions: 6"L x 4"W x 3/4"H
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums. Universal Features RO/DI single-membrane system with durable clear filter canisters Glycerin-filled pressure gauge Single Dow Filmtec membrane (The best there is.) 5 micron IceCap polypropylene sediment pre-filter 5 micron IceCap carbon block filter Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten and loosen canisters Installation connection fittings, polyethylene tubing & accessories Does not require a power source to run 75gpd & 100gpd Systems General Details Optimal Feed Water Pressure: 50-80 psi Maximum Handling Water Pressure: 150 psi Optimal Water Temperature: 25C (77F) Maximum Water Temperature: 39C (90F) pH Range: 2-11 Typical Rejection Rate: ~1:3 Uses standard 10in canisters, cartridges, and 1/4" push-connect fittings Dimensions (LxWxH): 16in x 6.5in x 15.5in Limited Warranty: 1 year (does NOT include filters)
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums. Universal Features RO/DI single-membrane system with durable clear filter canisters Glycerin-filled pressure gauge Single Dow Filmtec membrane (The best there is.) 5 micron IceCap polypropylene sediment pre-filter 5 micron IceCap carbon block filter Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten and loosen canisters Installation connection fittings, polyethylene tubing & accessories Does not require a power source to run 150gpd & 200gpd Systems General Details Optimal Feed Water Pressure: 65-80 psi Maximum Handling Water Pressure: 150 psi Optimal Water Temperature: 25C (77F) Maximum Water Temperature: 39C (90F) pH Range: 2-11 Typical Rejection Rate: ~1.5:1 Uses standard 10in canisters, cartridges, and 1/4" push-connect fittings Dimensions (LxWxH): 16in x 6.5in x 18.5in Limited Warranty: 1 year (does NOT include filters)
IceCap 50 PRO Hang On Back Turf Scrubber
Overview
Fight Algae with Algae with a HOB Turf Scrubber!
IceCap PRO Hang On Back (HOB) Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water. Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank in the process.
This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Best of all, the scrubber hangs right on the back of the aquarium, no sump or plumbing is required! Plug-and-play even comes with its own IceCap EVO feed pump.
Specifications
Dimensions (LxWxH): 11.3 x 5.3 x6.7inScreen Size: 7.4 x 3.5inLED Wattage: 6w / DC24VFeed Pump: EVO-400 (6w)Fits Tank Rims: 1/4-1 3/8inMax Flow rate: 105gphAquariums up to: 80gal
How IceCap Turf Scrubber Works
IceCap HOB Turf Scrubber is designed to be placed directly rim of the aquarium with the included EVO 400 pump placed within the aquarium. The water going into the scrubber is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the actual display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap 50Pro Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap AIO-120 Protein Skimmer
Overview
If you have an all-in-one aquarium that's between 10-30 gallons, the IceCap AIO 120 Protein Skimmer is a great option. It has a slim profile and can be hung within the aquarium's dedicated filter chamber. You can also adjust the skimmer's height to get the desired amount of waste collection.
This product is expertly made using durable, top-notch acrylic molding. Every part of it has been designed to ensure safety in marine environments and to deliver the most advanced foam fractionation technology with superior quality.
When examining the IceCap's AIO 120 core, you'll discover the 12V DCair 200 skimmer pump that's intended to deliver reliable and efficient results. Adjusting the skimmer's collection output is a breeze thanks to the inline controller, which allows you to fine-tune the pump's speed.
Features
Bioload HandlingHeavy - 10 GallonsMedium - 20 GallonsLight - 30 Gallons
Distinctive Square Body
Adjustable Height Hanging Bracket
Solid Construction
Easy-to-lift Off Collection Cup
Bubble Dispersant Chamber
Novel Output Flow
Efficient, Safe & Quiet DC Operation
Disassembles for Easy Cleaning & Maintenance
1 Year manufacturers warranty
Specifications
DCAIR-200 DC Pinwheel Pump
Power Consumption: 5watts
PSU Model: 1205
Output: 12V/.5A
Air Draw: 100lph / 3.5SCFH*
Water Draw: ~26gph
*Air and water results will vary depending on the aquarium setup.
IceCap AIO-240 Protein Skimmer
Overview
If you have an all-in-one aquarium that's between 20-65 gallons, the IceCap AIO 240 Protein Skimmer is a great option. It has a slim profile and can be hung within the aquarium's dedicated filter chamber. You can also adjust the skimmer's height to get the desired amount of waste collection.
This product is expertly made using durable, top-notch acrylic molding. Every part of it has been designed to ensure safety in marine environments and to deliver the most advanced foam fractionation technology with superior quality.
When examining the IceCap's AIO 240 core, you'll discover the 12V DCair 400 skimmer pump that's intended to deliver reliable and efficient results. Adjusting the skimmer's collection output is a breeze thanks to the inline controller, which allows you to fine-tune the pump's speed.
Features
Bioload HandlingHeavy - 20 GallonsMedium - 45 GallonsLight - 65 Gallons
Distinctive Square Body
Adjustable Height Hanging Bracket
Solid Construction
Easy-to-lift Off Collection Cup
Bubble Dispersant Chamber
Novel Output Flow
Efficient, Safe & Quiet DC Operation
Disassembles for Easy Cleaning & Maintenance
1 Year manufacturers warranty
Specifications
DCAIR-400 DC Pinwheel Pump
Power Consumption: 6watts
PSU Model: 1210
Output: 12V/1A
Air Draw: 150lph / 5.25SCFH*
Water Draw: ~53gph
*Air and water results will vary depending on the aquarium setup.
IceCap Algae Scrubber Pro - Large
Overview
IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Plug & Play - No Plumbing Necessary
Feed Pump Included
Adjustable Height for Sumps between 4in and 10in
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
Specifications
Dimensions (LxWxH): 16.5 x 6.15 x 21in (LxWxH)
Screen Size: 15.8 x 10.5in
LED Number: 2 x 15W
LED Wattage: 30w / DC24V
Feed Pump: EVO-2000 (30w)
Water Depth: 4 - 10in
Max Flow rate: 800gph
Aquariums up to: 350gal
How Internal IceCap Turf Scrubber Works
IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap Internal Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap Algae Scrubber Pro - Medium
Overview
IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Plug & Play - No Plumbing Necessary
Feed Pump Included
Adjustable Height for Sumps between 4in and 10in
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
Specifications
Dimensions (LxWxH): 12.5 x 6.15 x 21in (LxWxH)
Screen Size: 11.8 x 7.4in
LED Number: 2 x 12W
LED Wattage: 24w / DC24V
Feed Pump: EVO-1000 (20w)
Water Depth: 4 - 10in
Max Flow rate: 500gph
Aquariums up to: 225gal
How Internal IceCap Turf Scrubber Works
IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap Internal Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap Algae Scrubber Pro - Small
Overview
IceCap PRO Internal Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Plug & Play - No Plumbing Necessary
Feed Pump Included
Adjustable Height for Sumps between 4in and 10in
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
Specifications
Dimensions (LxWxH): 10.8 x 6.15 x 17in (LxWxH)
Screen Size: 8.5 x 6in
LED Number: 2 x 6W
LED Wattage: 12w / DC24V
Feed Pump: EVO-1000 (20w)
Water Depth: 4 - 10in
Max Flow rate: 250gph
Aquariums up to: 100gal
How Internal IceCap Turf Scrubber Works
IceCap Internal Algae Scrubbers are designed to be placed directly in the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begin to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in fewer algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap Internal Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap All In One Glass Aquarium - 10 Gallon
Overview
IceCap All-In-One Aquariums are handmade with high-quality materials.
Front and side viewing panels feature Low-Iron glass for optimal clarity and help showcase your tank inhabitants' color best.
The built-in spacious filtration compartments allow you to customize your filtration fully.
Specifications
Tank Dimensions: 14 x 14 x 14in (LxWxH)
Glass Thickness: 5mm Low Iron
Pre-Filter Chamber Dimensions: 3.2 x 3.2 x 13.4in (LxWxH)
Filter Chamber Dimensions: 5 x 3.2 x 13.4in (LxWxH)
Pump Chamber Dimensions: 3.75 x 3.2 x 13.4in (LxWxH)
Included Filtration: Mesh 200M Filter Sock
Return Pump: ~180GPH (700LPH)
What's Included
All-In-One Glass Aquarium
Return Pump
Plumbing
Sock Pre-filter
Self-leveling Mat (pre-installed)
IceCap All In One Glass Aquarium - 20 Gallon
Overview
IceCap All-In-One Aquariums are handmade with high-quality materials.
Front and side viewing panels feature Low-Iron glass for optimal clarity and help showcase your tank inhabitants' color best.
The built-in spacious filtration compartments allow you to customize your filtration fully.
Specifications
Tank Dimensions: 18 x 18 x 16in (LxWxH)
Glass Thickness: 6mm Low Iron
Pre-Filter Chamber Dimensions: 3.2 x 3.2 x 15in (LxWxH)
Filter Chamber Dimensions: 8.2x 3.2 x 15in (LxWxH)
Pump Chamber Dimensions: 3.75 x 3.2 x 15in (LxWxH)
Included Filtration: Mesh 200M Filter Sock
Return Pump: ~265GPH (1000LPH)
What's Included
All-In-One Glass Aquarium
Return Pump
Plumbing
Sock Pre-filter
Self-leveling Mat (pre-installed)
In the event of a power outage, is your tank protected?When it comes to a power failure, it's not a matter of if, but when. Fish and corals can perish in as little as 4 hours without water flow. The IceCap Battery Backup Version 3.0 will keep your flow pump running uninterrupted in the event of a power loss for ~35 hours*. You can connect two pumps to the battery backup and run them simultaneously for ~17 hours after the power goes out. To double your backup run time, you can even connect two battery backups together for further protection.Features & Highlights New model updated for 2021! This new version is 12V like the original! Turns on immediately after a power failure to protect your aquarium Keeps a single flow pump running ~35 hours after a power loss You can connect 2 flow pumps to a single battery backup for ~17 hours of backup operation You can connect two battery backups together to double the run time of a single pump to ~70 hours Compact and attractive form factor that is easy to mount on a wall or aquarium stand Get started immediately: power supply, pump adapters, and user guide are all included in the box Compatible with most 12 volt pumps from brands like Maxspect, IceCap, and Reef Octopus. * On average 50w at 30% power single pump/single power cell.Which Pump Brands Can I Connect to the IceCap Battery Backup v3.0? /strong>One of the biggest benefits of the IceCap Battery Backup over competing brands is that it isn't restricted to a single brand of pump. The new battery backup v3.0 is compatible with most 12-24V or less variable speed DC pumps on the market today.Some examples include: Maxspect Gyre Pumps (All Models) IceCap Gyre Pumps (All Models) Reef Octopus Octo Pulse Pumps (All Models) Reef Octopus VarioS Pumps (VarioS-2 and VarioS-4)
Battery Backup Best Practices for Operation & MaintenanceThe IceCap Battery Backup v3.0 should be kept in an environment with a temperature of approximately 70d F for optimal operation. The life of the battery will depend on the number of discharges that the unit has cycled through. Every time the unit cycles, the life of the battery and its capacity are reduced.Specifications DC Charger: Input: 100V to 240V 50/60Hz | Output: 27V 600MA Main Unit DC: Output: 12V x 2.5A max | Input: 27V 1A max Fuse: 250V 10A 5x20mm fast blow Size: 5.75in x 5in x 3.125in (WxLxH) Weight: 3.85lbs
IMPORTANT: NOT compatible with Reef Octopus VarioS Pumps, EcoTech pumps, Tunze, or AI Nero pumps.
IceCap Bio Sphere Media Tower
Overview
The IceCap Bio-Sphere Media Tower is a simple structure that allows the stacking of five Bio-Sphere Balls on each of its nine support rods to provide a more visually pleasing way of containing up to 45 total bio-sphere biological media.
The stacking of the media will increase filtration efficiency when compared to placing the media in a detritus-collecting mesh bag in the sump.
Bio-Sphere media are sold separately and designed to work with IceCap, Maxspect, and Mantis Nano-Tech Bio-Sphere media, all sold separately.
Specifications
Dimensions: 4.3 x 4.3 x 7.45in (LxWxH)
Holds Up To: 45 Bio-Spheres (1kg capacity) SOLD SEPARATELY
Color: Black Base with Clear Acrylic Rods
IceCap Bio-Spheres Media - 1KG
Overview
IceCap's Bio-Sphere is a dense arrangement of small ceramic spheres in a durable and compact one-and-a-quarter-inch ball capable of providing biological filtration up to 18 gallons each. The media's ultra-high surface area is perfect for the mass colonization of beneficial bacteria required for efficient nutrient cycling in both freshwater and marine aquariums and ponds.
Stack in a sump, trickle filters, media filters, wet/dry filters, hang-on-back filters, or directly in the aquarium.
Features
Ultra-High Surface Area Media
Durable Ceramic Media Beads
Neutral pH (7-7.5)
1KG (40 Bio-Sphere Balls) treats up to 750gal
Instructions
Rinse media before use. Media can be placed directly into the aquarium, reef sump, canister filter, wet/dry filter, or hang-on-back filter. The included bag helps keep media contained within the filter. For best results, seed the media with your choice of bacteria culture by soaking overnight before adding it to the aquarium. For optimal results, rinse the media with tank water and gently scrub the surface debris every 12 months. Replace media every 5 years or as needed. Add additional media to increase the biological capacity of a filter system. CAUTION - NEVER CLEAN/REPLACE MEDIA ALL AT ONCE
IceCap CO2 Absorbent Media - 1KG
Overview
Struggling with low pHFrustrated by slow coral growthWe've got the solution!
Introducing the IceCap CO2 Scrubber and CO2 Absorbent Media
It happens to all of us at some point during our reefing careers. You've to your alkalinity level right where you want it, but you're plagued by chronically low pH. If this sounds all too familiar, then rest assured you've come to the right place. There is a solution that is neither complicated nor expensive. All you'll need is a simple device called a CO2 Scrubber. It looks very similar to a media reactor, so the familiar form factor should put you at ease before you even begin.
The IceCap CO2 Scrubber, in particular, is an attractive and affordable option that is nearly universally compatible with any aquarium running a protein skimmer. The way it works is simple: you just attach the tubing that comes with the scrubber to the air intake on your skimmer. Then, you connect the other end to the CO2 scrubber and you're done. That's it! Now you'll be able to raise the pH of your aquarium and control carbon dioxide.
Features
Our user-friendly give you a visual cue when it's time to replace it: it changes color from white to pink! Once the color change is complete, you'll know it's time to replace the media (although you should still be checking your levels regularly with a pH test kit).
Our media isn't teeny-tiny like competitor products. We picked a perfectly pelletized size for minimal dust and maximum performance.
We've got nothing to hide. There's no secret recipe or proprietary blend. You should always know what you're putting into your tank, so that's why we put it on the label! Our media is a precise mixture of Calcium hydroxide (Ca(OH)2) and Sodium Hydroxide (NaOH).
Our convenient size (1kg) or 2.2lbs makes sure you get exactly what you need.
It's essential to replace the media after it's exhausted. If exhausted and left to stand it will revert back to a white color. It will appear to be fresh but it is not usable anymore. Instructions
Fill your reactor with CO2 Absorbent Media
Connect the output of the reactor to the skimmer's intake
Monitor your pH and replace the media once it turns pink or if pH begins to drop.
How Often Do I Replace Media
Once the media has completely changed colors from white to pink, you'll want to take the old media out (it cannot be regenerated) and replace it with new media. In terms of frequency, it's going to vary from hobbyist-to-hobbyist for a variety of reasons, including the aquarium itself and the environment in which it is located (your home, office, etc.). But as a general rule of thumb, you'll want to be prepared to change the media every two weeks (14 days). We recommend always have extra media on hand. That way, you'll never be caught in a situation where the parameters you've worked hard to stabilize begin to shift.
IceCap CO2 Scrubber - Large
Raise pH in Your Reef Aquarium with an
Overview
The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges.
Run This Simple Test to See if a CO2 Scrubber Will Help You
The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water.
Installing is Super Easy
The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber. Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out.
Running a CO2 Scrubber Helps Raise and Maintain pH
The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes.
Specifications
Body Size: 4 inch
Media Capacity: Approx. 2KG
Footprint: 5.2 x 5.2in
Height: 11.5"
Hang-On Bracket Included: Yes
IceCap CO2 Scrubber - Medium
Raise pH in Your Reef Aquarium with an
Overview
The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges.
Run This Simple Test to See if a CO2 Scrubber Will Help You
The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water.
Installing is Super Easy
The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber. Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out.
Running a CO2 Scrubber Helps Raise and Maintain pH
The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes.
Specifications
Body Size: 4 inch
Media Capacity: Approx. 1KG
Footprint: 4.5 x 4.5in
Height: 9.5"
Hang-On Bracket Included: Yes
IceCap CO2 Scrubber - Small
Raise pH in Your Reef Aquarium with an
Overview
The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges.
Run This Simple Test to See if a CO2 Scrubber Will Help You
The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water.
Installing is Super Easy
The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber. Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out.
Running a CO2 Scrubber Helps Raise and Maintain pH
The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes.
Specifications
Body Size: 4 inch
Media Capacity: Approx. 0.5KG
Footprint: 4.5 x 4.5in
Height: 6.5"
Hang-On Bracket Included: Yes
IceCap Controllable DC Media Reactor - Large
OverviewFor higher bioload or larger aquariums the IceCap Large DC Media Reactor delivers generous capacity and a controllable 12V DC pump to drive precise flow through GFO carbon or biopellets while the removable twin chamber canister makes service quick and clean.Features
Complete plug and play package with adjustable 12V DC feed pump
Twin chamber media canister promotes even contact and easy swaps
Robust acrylic construction for marine or freshwater systems
Small footprint relative to capacity for flexible sump placement
Suitable for phosphate control water polishing or carbon dosing via biopellets
Specifications
Item: IC-GFO-80P
L x W x H: 3.5 x 3.5 x 16.25 in
Body Size: 3.2 in
Max Media Capacity: ~820 mL
Pump: DC-700 (8.5 W @ 12 V)
Flow Range: ~210–700 L/h
Aquariums up to: 200 gal
Compatibility and Upgrade PathsUse with GFO activated carbon or biopellets. Integrates with CoralVue ecosystems including IceCap EXT or INT reactors and other filtration equipment as needs grow.Maintenance and CareRinse media dial in flow to achieve gentle tumble for GFO steady contact for carbon or active roll for biopellets and clean pump and screens routinely. Do not run dry and protect from salt creep and debris buildup.Warranty and Service1 year limited warranty provided by CoralVue beginning on purchase date; support available via CoralVue Support Portal.Shipping and Handling NotesAcrylic reactor and DC pump ship together; verify condition on arrival and rinse canister components before use.DirectionsLoad rinsed media into the canister seat the canister connect the included DC pump start low and increase power until the desired media movement is achieved then monitor parameters and adjust as needed.What's Included
IceCap Large DC Media Reactor with removable twin chamber canister
Controllable 12V DC feed pump with controller
IceCap Controllable DC Media Reactor - Medium
OverviewBuilt for mid size systems the IceCap Medium DC Media Reactor combines a removable twin chamber canister with a controllable 12V DC feed pump to maximize contact time for GFO carbon or biopellets while keeping maintenance simple and footprint compact.Features
Plug and play reactor with included adjustable 12V DC pump
Twin chamber canister design helps prevent channeling and clumping
Durable acrylic body for saltwater or freshwater applications
Tool free media swaps and service friendly layout
Small footprint for cabinet and sump installs
Specifications
Item: IC-GFO-60P
L x W x H: 2.7 x 2.7 x 14 in
Body Size: 2.4 in
Max Media Capacity: ~345 mL
Pump: DC-400 (6 W @ 12 V)
Flow Range: ~120–400 L/h
Aquariums up to: 120 gal
Compatibility and Upgrade PathsOptimized for GFO activated carbon and biopellets; add or swap media to target phosphate organics or nitrates. Pairs well with IceCap EXT or INT reactors and other CoralVue filtration gear as systems expand.Maintenance and CareRinse media before use set flow for the appropriate tumble or contact pace and clean pump and sponges on a schedule to maintain performance. Avoid running the canister dry or restricting flow completely.Warranty and Service1 year limited warranty from CoralVue; claims and support through the CoralVue Support Portal per standard terms.Shipping and Handling NotesShips as an acrylic reactor with DC pump; inspect for transit damage and rinse canister components before installation.DirectionsFill the canister with rinsed media reassemble connect the included DC pump start at a low power level and increase until media movement is appropriate then monitor nutrient trends and adjust flow or media volume accordingly.What's Included
IceCap Medium DC Media Reactor with removable twin chamber canister
Controllable 12V DC feed pump with controller
IceCap Controllable DC Media Reactor - Small
OverviewCompact and plug and play the IceCap Small DC Media Reactor gives AIO and sump systems precise control over GFO activated carbon or biopellets using a twin chamber canister and a 12V controllable DC pump with five power modes for optimal media contact time.Features
Feed pump included adjustable 12V DC with five power modes
Removable twin chamber canister prevents channeling and makes swaps fast
Small footprint ideal for All In One aquariums and tight sump spaces
Durable acrylic construction for freshwater or marine use
Easy media changes without removing the entire reactor
Specifications
Item: IC-GFO-50P
L x W x H: 2.2 x 2.2 x 12 in
Body Size: 2 in
Max Media Capacity: ~170 mL
Pump: DC-200 (5 W @ 12 V)
Flow Range: ~60–200 L/h
Aquariums up to: 40 gal
Compatibility and Upgrade PathsWorks with GFO activated carbon and biopellets; pair with fine or coarse media as needed. Scales with larger IceCap DC Media Reactors or EXT/INT reactors if your system grows and integrates well alongside filter rollers or socks.Maintenance and CareRinse new media thoroughly; for GFO aim for a gentle tumble for carbon use slow even flow and for biopellets maintain active rolling. Clean the pump and sponge screens regularly and never run the reactor dry.Warranty and Service1 year limited warranty from CoralVue covering defects in materials and workmanship; support via the CoralVue Support Portal.Shipping and Handling NotesShips as an acrylic reactor with DC pump; handle carefully and avoid impacts. Rinse canister sponges and media basket parts before first use.DirectionsLoad rinsed media into the twin chamber canister seat the canister connect the included DC pump set initial power to a low setting and adjust until media moves appropriately then monitor effluent clarity and nutrients and fine tune as needed.What's Included
IceCap Small DC Media Reactor with removable twin chamber canister
Controllable 12V DC feed pump with controller
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap Coral Feeder allows you to target feed corals and fish without getting your hands wet.It's soft rubber tip prevents possible damage to coral tissue.Available in 3 sizes - 50cm (19in), 70cm (27in), and expandable 100cm (21-39in) feeders.
The IceCap Dual Stage DI systems are designed to effectively treat filtered water before using it in your aquarium. The Dual DI stage filter helps remove excessive amounts of TDS and contaminants like ammonia, phosphates, nitrates, silicates, etc. The color will change from blue to brown as the DI media is exhausted.Specifications Uses Standard 10in Canisters, Cartridges & 1/4" Push-Connect Fittings Dimensions (LxWxH): 10.5 x 5 x 14.25in Limited Warranty: 1 year (does NOT include filters) What's Included Two durable clear canisters Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten & loosen canisters Polyethylene installation tubing
Magnetic Aquarium Heater Mount
Overview
The IceCap Magnetic Heater Mount securely holds your aquarium heater(s) in place with strong magnets, preventing the possibility of the heater resting against equipment, causing it to overheat or worse, float out of the water and run dry.
The heater mount holds heaters up to 3/8in in diameter and slides into the circular cutouts. It gently holds the heater element while also providing valuable space between surfaces for proper heat dissipation. The magnetic mounts allow for easy removal and maintenance when necessary. They are also completely sealed on the wet and dry side, keeping the system 100% aquarium inhabitant safe!
IceCap External Algae Scrubber Pro - Large
Overview
IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Feed Pump and Hose Included*
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
*For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Specifications
Dimensions (LxWxH): 16.5 x 8.7 x 12.6in (LxWxH)
Screen Size: 15.8 x 10.5n
LED Number: 2 x 15W
LED Wattage: 30w / DC24V
Feed Pump: EVO-2000 (30w)
Output Size: 1.5" Slip PVC
Overflow Protection Drain Size: 1" Slip PVC
Max Flow rate: 800gph
Aquariums up to: 350gal
How External IceCap Turf Scrubber Works
IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap External Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap External Algae Scrubber Pro - Medium
Overview
IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Feed Pump and Hose Included*
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
*For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Specifications
Dimensions (LxWxH): 12.6 x 8.7 x 12.6in (LxWxH)
Screen Size: 11.8 x 7.4in
LED Number: 2 x 12W
LED Wattage: 24w / DC24V
Feed Pump: EVO-1000 (20w)
Output Size: 1" Slip PVC
Overflow Protection Drain Size: 1/2" Slip PVC
Max Flow rate: 500gph
Aquariums up to: 225gal
How External IceCap Turf Scrubber Works
IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap External Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
IceCap External Algae Scrubber Pro - Small
Overview
IceCap PRO External Turf Scrubbers use algae as a natural water filter to remove nitrate, phosphate, and other pollutants from your aquarium water within the safe confines of your sump.
Rather than having algae grow uncontrolled inside your display tank, an algae scrubber allows you to grow algae in a controlled setting where it can be easily removed - thereby removing contaminants from your tank. This all-natural form of water filtration can reduce and even eliminate the need for water changes.
Features
Feed Pump and Hose Included*
Naturally Combats Nutrients and Algae Issues
Easy to Harvest and Maintain
Integrated Internal 24V LED Lights
Emergency Overflow Protection
Durable Acrylic Construction
Multi-Directional Input with Valve
*For external use only. Drain plumbing is required for installation (not included with the device, sold separately) - basic plumbing knowledge is needed. Specifications
Dimensions (LxWxH): 7 x 8.7 x 11.8in (LxWxH)
Screen Size: 8.5 x 6in
LED Number: 2 x 6W
LED Wattage: 12w / DC24V
Feed Pump: EVO-1000 (20w)
Output Size: 1" Slip PVC
Overflow Protection Drain Size: 1/2" Slip PVC
Max Flow rate: 250gph
Aquariums up to: 100gal
How External IceCap Turf Scrubber Works
IceCap External Algae Scrubbers are designed to be placed outside and above the sump so that the water flowing through the unit can drain directly back into the sump. Water is fed into the scrubber by the included IceCap EVO water pump. The water going into the unit is trickled down onto a screen that is illuminated on both sides by a powerful field of LED lights. As algae begins to grow on the screen, it "scrubs" the aquarium water of excess nutrients, resulting in less algae growing inside the display tank. Once the screen is covered in algae, it can be "harvested" by removing a sizable portion, thereby removing the contaminants from the system.
How to Harvest Algae from your IceCap External Turf Scrubber
Remove the top and loosen the quick-release union on the side. Lift the pipe and algae screen out and run them underwater in the sink. Use a credit card or similar scraper to remove the buildup. Be careful not to remove all of the algae from the screen as this will slow growth when placed back into the system. Leave some algae behind to seed the next batch so that it can grow faster. Under normal circumstances, expect to harvest algae every 1-3 weeks.
When to Run Your Ice Cap Algae Scrubber
Many hobbyists prefer to run their algae scrubbers on a reverse daylight schedule to help stabilize the pH in their aquarium water. This can be accomplished by plugging the LED lights into a timer or aquarium controller and programming it for a 12-hour daily photoperiod that runs opposite of the daylight schedule of the display tank lighting.
The IceCap Frag Transport Container is the perfect way to commute coral frags safely from one location to another. It is the ideal companion to bring with you on trips to your local fish store, frag swap, club meeting, or aquarium show!Hold Up to 8 Frags - Even If They Have Different Sized Plugs!The IceCap Transport Container is a water-tight container that holds up to 8 coral frags. Inside the container sits a round frag rack with 8 cut-outs to hold your frags. Each cut-out has a special membrane inside to lock your frags in place. In the center of the frag rack is a post with a handle on top so you can easily lift and lower the rack into the carrier without getting your hands wet. The post and flat-handle top also keep the rack from moving around inside the carrier. The rack itself does not rest on the bottom of the carrier. There are feet on the bottom so your plugs have space to slide in and stay put instead of getting pushed back up and out of the tray.The IceCap Coral Frag Transport Container has a screw-on gasket sealing lid to lock your corals safe inside so you won't have to ever worry about leaks. Each hole is numerically labeled so you can keep track of what type of coral is in each position. Another benefit of the membranes inside the plug holders is that they are able to accommodate a variety of different sized frag plugs. We have all had that experience of buying a coral that comes on a plug that won't fit in our frag rack. With these special membranes, you won't have that problem with the IceCap Coral Frag Transport Container. The IceCap Frag Transport Container is a Perfect Coral Dipping StationThe Coral Frag Transport Container is a versatile frag transport system. Not only can you safely bring corals with you when you travel, but the carrier itself lends itself perfectly for dipping and acclimating new corals once you get home. You can use the carrier to bathe and disinfect new corals with coral dip before introducing them to your aquarium. You can even quarantine an existing frag from your system inside the carrier to cleanse it if you suspect or observe pests or disease.What's Included Frag transport container Frag tray Specifications Dimensions: 4.84" (123mm) wide x 3.5" (88mm) high Volume; 0.28 Gallons / 1.05 Litres
IceCap Gravity ATO
Replenish Evaporated Water... with No Power!
Overview
The IceCap Gravity ATO automatically replaces evaporated water in freshwater and marine aquariums without the use of electricity.
Easy to Use
To use it, screw the base to the bottle, then mount it to tank rim. When the water level drops to reveal the shorter tube, the water in the bottle automatically flows into the tank do to the pressure difference.
Package Includes:
Gravity ATO Base
x3 Mounting Inserts for different rim sizes
500ml Bottle
Silicone Tubing
Installation
Select a suitable mounting insert for the tank's thickness and insert it into the groove on the Gravity ATO Base.
Cut the tubing to the proper length based on the desired water level. There should be a long tube and a short tube, both cut at a slant. Insert the two tubes onto the Gravity ATO Base.
Thread the bottle into the base and install it onto the rim of the fish tank.
Adjust water level as needed to ensure both tubes are in the water. Over time, the Gravity ATO will replenish evaporated water when the water level falls under the shorter tube.
The IceCap Gyre is back and better than ever! The all-new IceCap 2K Gyre Flow Pump is not only more powerful than its predecessor.Gyre 2K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 2K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! New for 2020 is the addition of the IceCap Dual Gyre Pump WiFi Controller. The new controller utilizes CoralVue's powerful HYDROS platform to access life-like flow patterns, scheduling, and much more.Technical Specifications Rating: Aquariums 20-90+ Gallons Maximum Flow: 2,000 Gallons Per Hour Minimum Flow: 739 Gallons Per Hour Power Consumption: 8-25 Watts Size: 8.78L x 2.83W x 1.5H Weight:457g/16.10z Cable Length: 6ft Tank Thickness: Up to 1/2" thick Glass or Acrylic: Safe for Both Kit includes 2K Gyre Pump and power supply.< br/>Please Note: You will require the Hydros Wave Ice Cap Gyre Engine Pump Adapter in order to hook this pump up to the wave engine. It is currently not included
IceCap Gyre 2K Pump with WaveEngine LE Controller
Overview
The IceCap Gyre is back and better than ever! The all-new IceCap 2K Gyre Flow Pump is not only more powerful than its predecessor, it is now WiFi controllable, allowing you to fine-tune your flow effortlessly and wirelessly from your mobile device.
Features
Unique Gyre Flow: Virtually Eliminates Dead Spots
Evenly Distributed Linear Flow
Discrete Design
Can Be Mounted Vertically or Horizontally
Can Be Mounted Close to the Water Surface
Waterproof Magnet Mounts
Twin Directional Flow Cages
Includes 2 Sets of Propellers: Orange and Black
HYDROS WaveEngine Direct Drive Compatible
1-Year Limited Warranty
The IceCap 2K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! Technical SpecificationsRating: Aquariums 20-90+ GallonsMaximum Flow: 2,000 Gallons Per Hour
Minimum Flow: 739 Gallons Per Hour
Power Consumption: 8-25 Watts
Size: 8.78L x 2.83W x 1.5H
Weight:457g/16.10z
Cable Length: 6ft
Tank Thickness:Up to 1/2" thick
Glass or Acrylic: Safe for Both
HYDROS Pump Controller Simplify way we manage flow in our aquariums
The WaveEngine LE "Light Edition" allows you to easily add different brand pumps to your aquarium and obtain the ultimate flow. Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Connect up to two (2) pumps directly to the controller, removing multiple power bricks' clutter.**
App-Based Dual Pump ControllerA single app controls a variety of different pumps from your mobile device. Access all the features you desire without needing multiple apps, individual controllers, and bulky power supplies that require a "bird's nest" of cables and wires.
Until now, limited capabilities have restricted the simple controllers that manage popular pumps like the Maxspect Gyre, Reef Octopus Octo Pulse flow pumps.
In addition to this convenient and advanced control, you can reduce clutter by eliminating the DC power brick used by modern controllable pumps!
Direct Pump DriverThe HYDROS WaveEngine LE connects directly to the pump head, removing the clutter of the power brick and the control head for these pumps.Maxspect Gyre XF-130 / 230, XF-150 / 250, XF-330 / 350, XF-280*
IceCap Gyre 1K, 3K, 2K, 4K
Reef Octopus RODC-2500, 3500 and 5500, VarioS-2 and 4, Octo Pulse 2 and 4
0-10V Input ControlRECEIVE commands from other devices, including push buttons, float switches, plus much more.Here Is What WELE Can Do
One App to Rule Them All! The HYDROS App from CoralVue will completely replace the need for individual manual controllers and apps. We can easily tap into the native control platform to access all the preset flow patterns and modes or create our own through modern technology! Connect wirelessly to the HYDROS WaveEngine and then communicate with your flow pumps.
FeaturesEasily add pumps and specify the location of the pump in the aquarium as well as specify min & max speed a pump can run atUse different brand pumps to work together in different flow preset such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns.
Create multiple groups
Create and access operational modes such as Feed, Water Change, or Night mode
Monitor power consumption (volts, amps & watts) based on individual pumps & total consumption of all attached pumps
Monitor pump's RPM to ensure maximum performance
Full cloud connectivity so you can control your pumps from anywhere in the world
Real-time notifications of system status & pump performance
Define custom flow patterns of any duration up to 24 hours with 1/1000 second accuracy
Power up to 2 pumps with the Direct Drive ports using a single 100/240V 4 amp input power supply (included). The output is 24V/6 amps. *Maxspect Gyre 280 pumps can only run at 75% max intensity. **An appropriate pump adapter**PLEASE NOTE: An appropriate pump adapter or 0-10V cable (sold separately) is required to connect pumps directly to the HYDROS WaveEngine LE.
Kit includes 2K Gyre Pump, power supply and Dual Gyre Pump WiFi Controller
The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is not only more powerful than its predecessor.Gyre 4K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear Flow Discrete Design Can Be Mounted Vertically or Horizontally Can Be Mounted Close to the Water Surface Waterproof Magnet Mounts Twin Directional Flow Cages Includes 2 Sets of Propellers: Orange and Black HYDROS WaveEngine Direct Drive Compatible 1-Year Limited Warranty The IceCap 4K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! New for 2020 is the addition of the IceCap Dual Gyre Pump WiFi Controller. The new controller utilizes CoralVue's powerful HYDROS platform to access life-like flow patterns, scheduling, and much more.Technical Specifications Rating: Aquariums 25-150+ Gallons Maximum Flow: 4,000 Gallons Per Hour Minimum Flow: 1286 Gallons Per Hour Power Consumption: 13-45 Watts Size: 12L x 3.15W x 1.7H Weight:711g/25.1z Cable Length: 6ft Tank Thickness: Up to 5/8" thick Glass or Acrylic: Safe for Both Kit includes 4K Gyre Pump and power supply.< br/>Please Note: You will require the Hydros Wave Ice Cap Gyre Engine Pump Adapter in order to hook this pump up to the wave engine. It is currently not included
IceCap Gyre 4K Pump with WaveEngine LE Controller
Overview
The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is not only more powerful than its predecessor, it is now WiFi controllable, allowing you to fine-tune your flow effortlessly and wirelessly from your mobile device.
Features
Unique Gyre Flow: Virtually Eliminates Dead Spots
Evenly Distributed Linear Flow
Discrete Design
Can Be Mounted Vertically or Horizontally
Can Be Mounted Close to the Water Surface
Waterproof Magnet Mounts
Twin Directional Flow Cages
Includes 2 Sets of Propellers: Orange and Black
HYDROS WaveEngine Direct Drive Compatible
1-Year Limited Warranty
The IceCap 4K Gyre uses officially licensed technology by Maxspect, creators of the original Gyre pump, to generate the now-iconic gyre water flow in your aquarium - but without breaking the bank! Technical SpecificationsRating: Aquariums 25-150+ GallonsMaximum Flow: 4,000 Gallons Per Hour
Minimum Flow: 1286 Gallons Per Hour
Power Consumption: 13-45 Watts
Size: 12L x 3.15W x 1.7H
Weight:457g/16.10z
Cable Length: 6ft
Tank Thickness:Up to 5/8" thick
Glass or Acrylic: Safe for Both
HYDROS Pump Controller Simplify way we manage flow in our aquariums
The WaveEngine LE "Light Edition" allows you to easily add different brand pumps to your aquarium and obtain the ultimate flow. Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns. Connect up to two (2) pumps directly to the controller, removing multiple power bricks' clutter.**
App-Based Dual Pump ControllerA single app controls a variety of different pumps from your mobile device. Access all the features you desire without needing multiple apps, individual controllers, and bulky power supplies that require a "bird's nest" of cables and wires.
Until now, limited capabilities have restricted the simple controllers that manage popular pumps like the Maxspect Gyre, Reef Octopus Octo Pulse flow pumps.
In addition to this convenient and advanced control, you can reduce clutter by eliminating the DC power brick used by modern controllable pumps!
Direct Pump DriverThe HYDROS WaveEngine LE connects directly to the pump head, removing the clutter of the power brick and the control head for these pumps.Maxspect Gyre XF-130 / 230, XF-150 / 250, XF-330 / 350, XF-280*
IceCap Gyre 1K, 3K, 2K, 4K
Reef Octopus RODC-2500, 3500 and 5500, VarioS-2 and 4, Octo Pulse 2 and 4
0-10V Input ControlRECEIVE commands from other devices, including push buttons, float switches, plus much more.Here Is What WELE Can Do
One App to Rule Them All! The HYDROS App from CoralVue will completely replace the need for individual manual controllers and apps. We can easily tap into the native control platform to access all the preset flow patterns and modes or create our own through modern technology! Connect wirelessly to the HYDROS WaveEngine and then communicate with your flow pumps.
FeaturesEasily add pumps and specify the location of the pump in the aquarium as well as specify min & max speed a pump can run atUse different brand pumps to work together in different flow preset such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns.
Create multiple groups
Create and access operational modes such as Feed, Water Change, or Night mode
Monitor power consumption (volts, amps & watts) based on individual pumps & total consumption of all attached pumps
Monitor pump's RPM to ensure maximum performance
Full cloud connectivity so you can control your pumps from anywhere in the world
Real-time notifications of system status & pump performance
Define custom flow patterns of any duration up to 24 hours with 1/1000 second accuracy
Power up to 2 pumps with the Direct Drive ports using a single 100/240V 4 amp input power supply (included). The output is 24V/6 amps. *Maxspect Gyre 280 pumps can only run at 75% max intensity. **An appropriate pump adapter**PLEASE NOTE: An appropriate pump adapter or 0-10V cable (sold separately) is required to connect pumps directly to the HYDROS WaveEngine LE.
Kit includes 2K Gyre Pump, power supply and Dual Gyre Pump WiFi Controller
IceCap In-Sump UV Sterilizer - 18 Watt
OverviewThe IceCap In-Sump UV Sterilizer reduces free floating algae bacteria parasites and fungi to enhance clarity and fish health without chemicals. The drop in design sits directly in your sump and includes the correct feed pump for easy plug and play setup and consistent exposure time.Features
Super simple drop in sump installation
Plug and play with feed pump included
High output UV lamp and reliable ballast
Helps clarify water and reduce disease spread
No permanent plumbing and will not harm beneficial bacteria on surfaces and media
Specifications
Item: IC-UVR-18INT
Freshwater up to: 600 gal
Marine up to: 60 gal
Dimensions L x W x H: 3.5 x 3.5 x 18.4 in
UV Power: 18 W @ 120 V
Lamp length: 7.3 in
Current: 800 mA
UVC output: 50 uW/cm2
Lamp life: 10000 hours
Included pump: DC-700 8.5 W @ 12 V
Compatibility and Upgrade PathsIdeal for AIO and compact sump systems; pairs well with mechanical filtration to remove killed particulates. For larger systems consider the 27 W or 40 W In Sump models or IceCap inline UV options as your bioload grows.Maintenance and CareWipe the quartz sleeve per the manual to remove film check pump intake for debris and replace the UV lamp annually or at 10000 hours. Never run dry and maintain stable sump water level for consistent exposure time.Warranty and ServiceBacked by a 1 year limited warranty through CoralVue with support via the CoralVue Support Portal; warranty begins on purchase date and covers defects in materials and workmanship per CoralVue terms.Shipping and Handling NotesHandle as a delicate electronic and glass assembly; inspect on arrival and keep dry during transit and storage. Install on a GFCI protected circuit with a drip loop.DirectionsPlace the unit upright in a stable sump chamber with constant water level connect and position the included pump per the manual ensure unobstructed intake and outlet plug in the pump and ballast verify flow through the chamber and monitor clarity and livestock for improvements over the first weeks.What's Included
IceCap In Sump UV Sterilizer assembly with HO UV lamp
Feed pump DC-700
Power cord and ballast integrated
IceCap In-Sump UV Sterilizer - 27 Watt
OverviewThe 27 W In Sump model adds capacity and dwell time for mid sized aquariums while keeping the same drop in simplicity. It ships with the matched feed pump so you can achieve effective exposure without guesswork and enjoy clearer water and healthier livestock faster.Features
Plug and play in sump installation
Matched feed pump included for proper flow
High output UV lamp with reliable ballast
Reduces free floating algae bacteria parasites and fungi
Leaves beneficial biofilter bacteria on media and surfaces intact
Specifications
Item: IC-UVR-27INT
Freshwater up to: 1300 gal
Marine up to: 140 gal
Dimensions L x W x H: 4.6 x 4.3 x 22 in
UV Power: 27 W @ 120 V
Lamp length: 11.3 in
Current: 800 mA
UVC output: 75 uW/cm2
Lamp life: 10000 hours
Included pump: EVO 1000 15 W @ 120 V
Compatibility and Upgrade PathsWorks in most standard sump chambers; combine with mechanical filtration for best water polishing. If bioload increases consider the 40 W model or additional mechanical or chemical media to complement UV performance.Maintenance and CareClean the quartz sleeve on schedule and ensure adequate flow and water level. Replace the UV lamp at 10000 hours or annually for best performance and keep the pump free of debris and calcium buildup.Warranty and Service1 year limited warranty through CoralVue from date of purchase; service and claims handled via the CoralVue Support Portal.Shipping and Handling NotesShips as a glass and electronic assembly; handle carefully and keep dry during installation. Use a GFCI and drip loop for safety.DirectionsStand the unit upright in a sump chamber with constant water level attach and position the included EVO 1000 pump per the manual confirm unobstructed flow through the UV chamber then power on and monitor results over the next several days.What's Included
IceCap In Sump UV Sterilizer assembly with HO UV lamp
Feed pump EVO 1000
Power cord and ballast integrated
IceCap In-Sump UV Sterilizer - 40 Watt
OverviewThe 40 W In Sump UV Sterilizer is the high capacity option for larger or heavily stocked systems delivering strong UVC output and dependable pump matched flow in a simple drop in package that improves clarity and helps control waterborne pathogens without chemical additives.Features
Drop in sump design with included feed pump
High output UV lamp and ballast for reliable performance
Enhances water clarity and helps reduce disease transmission
No permanent plumbing required and safe for beneficial biofilter bacteria
Specifications
Item: IC-UVR-40INT
Freshwater up to: 3000 gal
Marine up to: 400 gal
Dimensions L x W x H: 5.4 x 5.1 x 24 in
UV Power: 40 W @ 120 V
Lamp length: 15.75 in
Current: 800 mA
UVC output: 105 uW/cm2
Lamp life: 10000 hours
Included pump: EVO 2000 30 W @ 120 V
Compatibility and Upgrade PathsPairs well with fleece rollers or filter socks to capture particulates after sterilization. For complex systems combine with a controller to schedule runtime or integrate with additional IceCap filtration as needs change.Maintenance and CareClean the quartz sleeve regularly to maintain UVC transmission monitor the pump for buildup and replace the UV lamp annually or at 10000 hours. Keep the unit upright and fully submerged per the manual and do not operate dry.Warranty and ServiceCovered by CoralVue 1 year limited warranty; support available via the CoralVue Support Portal starting from purchase date.Shipping and Handling NotesHandle with care to avoid damage to the quartz and electronics; use a GFCI outlet and drip loop. Verify package condition on delivery.DirectionsPlace the sterilizer upright in a sump chamber with constant level attach and position the included EVO 2000 pump per the manual verify unobstructed flow through the UV chamber power on and observe water clarity and livestock condition as the system stabilizes.What's Included
IceCap In Sump UV Sterilizer assembly with HO UV lamp
Feed pump EVO 2000
Power cord and ballast integrated
Modern Skimmer Design & FunctionalityThe IceCap K1 Nano is a remarkably compact skimmer that offers a new level of refined filtration for marine aquariums ranging from 10 to 30 gallons. All aspects of the skimmer were implemented to surpass many challenges other skimmers on the market misses out on. Included magnet mount allows for easy placement on surfaces up to 1/2in thick.Compact & Built to LastMaster crafted from robust PVC and high-quality acrylic. All components are marine safe and refined in every aspect to provide the latest enhancements in foam fractionation and the highest in quality. An impressively compact footprint makes it the ideal candidate for tight compartment applications. Every aspect of the skimmer disassembles completely for easy service.Quiet Performance & ControlAt the Core of the IceCap K1, you will find the DCair 200 skimmer pump built to provide efficient performance. The pipeless output offers fine-tuning and trouble-free underwater outflow plus quiet operation. Our pipeless design not only saves on space but also allows the outgoing water to exit on the side of the skimmer and below the water surface providing splash-free circulation in the sump.Bioload HandlingThe bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system.Features Magnet Mount Distinctive Turbulence Reducing Body Solid PVC & Acrylic Construction Bubble Dispersant Chamber Pipeless Output Valve Efficient & Quiet Operation Disassembles Completely for Easy Cleaning & Maintenance In-Sump Installation Only Specifications Skimmer Body: 2in Footprint: 2.7in x 3.2in Footprint with mount: 4.75 x 3in or 3.5 x 4in Total Height: 13in Magnet Mount: Up to 1/2in thick Pump: DCair 200 Pinwheel pump operation at 26gph and 5 watts.
ULTRA Compact Protein Skimmer
Overview
The IceCap K1 NEO is an ultra-compact skimmer that offers a new level of refined filtration for marine aquariums ranging from 5 to 15 gallons. All aspects of the skimmer were designed to surpass many challenges other skimmers on the market miss out on. Ideal skimmer for those small all-in-one aquatic systems with filtration in the back overflow.
Compact & Built-to-Last
Master crafted from robust PVC and high-quality acrylic. All components are marine safe and refined in every aspect to provide the latest enhancements in foam fractionation and the highest in quality.
An impressively compact footprint makes it the ideal candidate for tight compartment applications. Can be placed directly into a nano tank overflow or display aquarium and it mounts directly to the side of the glass or acrylic and secures with a thumbscrew.
Quiet Performance & Control
At the Core of the IceCap K1, you will find the DCair 200 skimmer pump built to provide efficient performance.
The pipeless output offers fine-tuning and trouble free underwater outflow plus quiet operation. Our pipeless design not only saves on space but also allows the outgoing water to exit on the side of the skimmer and below the water surface providing splash-free circulation in the sump.
Bioload Handling
The bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system. All values below are exluding sump.
Heavy Bioload - 5 gallons
Medium Bioload - 10 gallons
Light Bioload - 15 gallons
K1-Nano Technical Specs
Skimmer Body: 1.98inFootprint: 2.6in x 2inTotal Height: 9.8in
Pump Information
DCair 200 Pinwheel PumpPower Consumption: 5wattsAir Draw: 100lph / 3.5scfh*Water Draw: 26gph*Air and water results will vary depending on aquarium setup
WARRANTYCoralVue, Inc. and IceCap hereby guarantee this product to be free from defects in material and workmanship for a period of: 1 YearWarranty is activated on the date of purchase.This Standard Limited Warranty applies and is limited as follows: To the product only as long as it remains in the possession of the original purchaser.
To the product that has not been subject to accident, misuse or abuse.
To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect,secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Simplify & automate the addition of calcium hydroxide with the IceCap Kalk Mixer!The IceCap Kalk Mixer is a dedicated reactor for mixing calcium hydroxide (Kalkwasser) solution to ensure maximum concentration with each dose to your aquarium and eliminates the need for frequent manual mixing.A clever magnetic mixer means no more pesky powerheads to clean and replace frequently. The intelligent design makes maintenance a breeze and the slim profile allows for easy placement under your tank and integration with your existing ATO system.BenefitsUsing Kalkwasser to supplement the aquarium with calcium and carbonates is one of the most efficient and economic methods and has been used successfully on reef aquariums for many years. The Kalkwasser powder is relatively inexpensive, is super concentrated and can simply be mixed into your top-off water. Additionally, the elevated pH of the resulting kalkwasser solution and CO2 reducing properties help to maintain a more desirable and stable pH of 8.3 inside your tank.The use of the IceCap Kalk Mixer will ensure maximum concentration with each dose to your aquarium and reduce the need for frequent manual addition and mixing of the solution. How it WorksSimply connect the IceCap Kalk Mixer to any freshwater reservoir with the use of an Auto Top Off unit or dosing pump. Kalkwasser powder is then added to the mixing chamber via the handy quick-fill cap. The adjustable speed motor should then be attached to a timer or controller and set to periodically mix the solution inside the reactor a few times per day.When freshwater is pumped from your ATO reservoir into the reactor, the freshly mixed and highly concentrated Kalkwasser solution is pushed out and into your aquarium.When adding kalkwasser to any aquarium, it is best to use a pump with a slow flow rate. Due to the high pH of the solution, you must add kalkwasser slowly and in small amounts, typically multiple times per day. Most ATO systems on the market will fit the flow rate needs of the reactor very nicely because of the small and frequent dosages of freshwater. MaintenanceOnce every two weeks, the kalkwasser powder in the reactor will need to be replenished and thanks to the quick-fill cap, the process is painless and mess-free. The entire reactor vessel only needs to be rinsed out completely once per month to dispose of precipitates and make room for fresh Kalkwasser powder.Note: Kalk Mixer motor is not suitable for continuous use and should not be run constantly. Necessary ATO system, calcium hydroxide (kalkwasser), dosing pump and timer/controller are required and sold separately. Reactors are not submersible. Features Adjustable speed magnetic mixer Solid PVC and acrylic construction Compact profile easily fits under your tank Reactor vessel detaches from base for easy maintenance Push-fit tubing connectors Convenient quick-fill cap for mess free Kalkwasser addition Sealed airtight environment preserves solution potency Gravity drain design ensures reliable performance Specifications Footprint: 5.7" x 5.7" Body Diameter: 5" Height: 25" Holding Capacity: ~1gal Ideal for aquariums up to 100 gallons
The IceCap Magnetic Mount Float Valve can be either hung on the side of a sump or any container without the need to drill a hole. The IceCap Magnetic Mount Float Valve comes with universal tubing retainer and tubing
A Simple Way to Organize Your Dosing LinesThe IceCap magnetic tube holder universally mounts tubing securely to most smooth locations up to 1/2in thick. The magnetic holder can be fixed on the sump or aquarium wall and can hold up to 4 dosing tubes Dimensions (LxWxH): 3.5 x 2 x 1.75in
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 8 frags Dimensions: 9.5 x 4.8 x 1.8in (L X W XH)
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 23 frags Dimensions: 9.5 x 4.1 x 1.8in (L X W XH)
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 8 frags Dimensions: 5 x 3 x 1.8in (L X W XH)
Magnetic Aquarium Heater Mount
Overview
The IceCap Magnetic Heater Mount securely holds your aquarium heater(s) in place with strong magnets, preventing the possibility of the heater resting against equipment, causing it to overheat or worse, float out of the water and run dry.
The heater mount holds heaters up to 3/8in in diameter and slides into the circular cutouts. It gently holds the heater element while also providing valuable space between surfaces for proper heat dissipation. The magnetic mounts allow for easy removal and maintenance when necessary. They are also completely sealed on the wet and dry side, keeping the system 100% aquarium inhabitant safe!
