For 50 years now our research and product range has been focused on the wellbeing of water-dwelling life. We aim to create nature-identical habitats for aquarium life whilst at the same time bringing healthy and easily-maintained reef tanks within the reach of aquarium owners.
In the process, we have consistently avoided synthetic supplements and concentrations of content higher than those found in nature.
The pharmaceutical grade sea salt especially for modern reef aquaria.Tropic Marin PRO-REEF Sea Salt has been designed to meet the special requirements of reef aquariums with optimized concentrations of calcium and magnesium, which promote the growth of corals. The lower buffering and the correct pH value serve to stabilize the natural water values, and particularly, the hardness of carbonates, even with the use of calcium reactors. Natural and stable conditions for delicate marine life are achieved only by accurately balancing all influencing factors.Tropic Marin PRO-REEF is thus the ideal foundation for the care and growth of fish, corals and other aquatic invertebrates in modern reef aquariums. Use seawater prepared with Tropic Marin PRO-REEF for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank.Benefits Optimizes calcium- and magnesium concentrations as well as alkalinity and pH. Designed to meet the special requirements of modern reef aquaria with higher calcium requirements. Especially designed for use with calcium reactors or mineral additives. To maintain the alkalinity in a 7-8 dKH range. Manufactured from pure, pharmaceutical grade salts. Contains all major- and minor elements in the exact proportions found in tropical sea water. The 70 trace elements are completely soluble due to the use of the mixed-crystal method. Compliance with the most stringent quality control Instructions To achieve a salinity level of 32-35 %% (psu), dissolve 35 ml of Tropic Marin PRO-REEF per liter or approximately 1/2 cup of Tropic Marin PRO-REEF per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77F / 23-25C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water.Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form.When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77F / 23-25C) and the pH-value should be in the range of 8.0 - 8.4. If all parameters are correct, the salt water is ready to use.After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms.A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin PRO-REEF, will help to maintain the water quality that your livestock needs for good health.Parameters: Approx. 7 KH, calcium approx. 440 ppm, magnesium approx. 1350 ppm.Application: For reef tanks with higher calcium requirements. To maintain the alkalinity in a 7-8 dKH range; particularly suitable when using a calcium reactor.
$159.95
ALL-FOR-REEF is an easy- to-use, highly concentrated solution for the supply of ALL essential minerals and trace elements in new or moderately stocked reef aquariums.Minerals are consumed through the growth of organisms and other processes in the aquarium and must therefore be supplemented regularly. These include mainly the necessary elements calcium, magnesium and strontium and carbonate hardness elements for the growth of the calcareous skeletons of stony corals, red coralline algae and other reef organisms. ALL FOR REEF contains all these components in highly concentrated form and also contains the most important trace elements: Iodine, bromine and fluorine for growth and stabilization of the skeletons of stony corals, sponges and crustaceans; selenium to eliminate free radicals; molybdenum and vanadium for the establishment of important enzyme complexes.With these components, co-ordinated in their concentration ratio, ALL-FOR-REEF creates excellent care conditions in only one solution. No additional compounds are created (e.g. sodium chloride) that alter the salinity or the ion balance. Benefits Complete mineral supply in only one solution The most important trace elements are already included (all elements of the Tropic Marin K+ ELEMENTS & A- ELEMENTS) No formation of by-products (e.g. sodium chloride); the salinity and the ion balance are not altered No formation of excess carbon dioxide Suitable for an aquarium stocked with soft corals, LPS, SPS, other filter feeders and/or crustaceans Easy to use - Suitable both for manual dosing and for dosing pumps InstructionsStart with a daily dose of 5 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume. Increase the daily dosage - by continuous control of the alkalinity - weekly by 2.5 ml per 100 litres (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9 dkH is reached.Do not exceed a maximum daily dose of 25 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume.500 ml ALL-FOR-REEF contain 20,000 mg calcium, 950 mg magnesium, 390 mg strontium, 2,800 carbonate hardness and 17 mg iodine.
$36.20
ALL-FOR-REEF POWDER by Tropic Marin is an easy- to-use, highly concentrated mineral blend for the supply of ALL essential minerals and trace elements in new or moderately stocked reef aquariums.Minerals are consumed through the growth of organisms and other processes in the aquarium and must therefore be supplemented regularly. These include mainly the necessary elements calcium, magnesium and strontium and carbonate hardness elements for the growth of the calcareous skeletons of stony corals, red coralline algae and other reef organisms. ALL FOR REEF contains all these components in highly concentrated form and also contains the most important trace elements: Iodine, bromine and fluorine for growth and stabilization of the skeletons of stony corals, sponges and crustaceans; selenium to eliminate free radicals; molybdenum and vanadium for the establishment of important enzyme complexes.With these components, co-ordinated in their concentration ratio, ALL-FOR-REEF creates excellent care conditions in only one solution. No additional compounds are created (e.g. sodium chloride) that alter the salinity or the ion balance. Benefits Complete mineral supply in only one solution The most important trace elements are already included (all elements of the Tropic Marin K+ ELEMENTS & A- ELEMENTS) No formation of by-products (e.g. sodium chloride); the salinity and the ion balance are not altered No formation of excess carbon dioxide Suitable for an aquarium stocked with soft corals, LPS, SPS, other filter feeders and/or crustaceans Easy to use - Suitable both for manual dosing and for dosing pumps Instructions6 level measuring spoons (approx. 160 g) All-For-Reef Powder are dissolved in 1 l of reverse osmosis water to create the liquid mineral blend. This solution has a long shelf-life and contains 43,000 mg of calcium, 6,000° of carbonate hardeners, 1,900 mg magnesium, 780 mg of strontium, and 34 mg of iodine as well as all other important trace elements.Start with a daily dose of 5 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume. Increase the daily dosage - by continuous control of the alkalinity - weekly by 2.5 ml per 100 litres (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9 dkH is reached.Do not exceed a maximum daily dose of 25 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume.800 grams of All-For-Reef Powder is enough to make 5 litres of dosing solution and 1600g is enough to make 10 litres.
$66.15
ALL-FOR-REEF POWDER by Tropic Marin is an easy- to-use, highly concentrated mineral blend for the supply of ALL essential minerals and trace elements in new or moderately stocked reef aquariums.Minerals are consumed through the growth of organisms and other processes in the aquarium and must therefore be supplemented regularly. These include mainly the necessary elements calcium, magnesium and strontium and carbonate hardness elements for the growth of the calcareous skeletons of stony corals, red coralline algae and other reef organisms. ALL FOR REEF contains all these components in highly concentrated form and also contains the most important trace elements: Iodine, bromine and fluorine for growth and stabilization of the skeletons of stony corals, sponges and crustaceans; selenium to eliminate free radicals; molybdenum and vanadium for the establishment of important enzyme complexes.With these components, co-ordinated in their concentration ratio, ALL-FOR-REEF creates excellent care conditions in only one solution. No additional compounds are created (e.g. sodium chloride) that alter the salinity or the ion balance. Benefits Complete mineral supply in only one solution The most important trace elements are already included (all elements of the Tropic Marin K+ ELEMENTS & A- ELEMENTS) No formation of by-products (e.g. sodium chloride); the salinity and the ion balance are not altered No formation of excess carbon dioxide Suitable for an aquarium stocked with soft corals, LPS, SPS, other filter feeders and/or crustaceans Easy to use - Suitable both for manual dosing and for dosing pumps Instructions6 level measuring spoons (approx. 160 g) All-For-Reef Powder are dissolved in 1 l of reverse osmosis water to create the liquid mineral blend. This solution has a long shelf-life and contains 43,000 mg of calcium, 6,000° of carbonate hardeners, 1,900 mg magnesium, 780 mg of strontium, and 34 mg of iodine as well as all other important trace elements.Start with a daily dose of 5 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume. Increase the daily dosage - by continuous control of the alkalinity - weekly by 2.5 ml per 100 litres (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9 dkH is reached.Do not exceed a maximum daily dose of 25 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume.800 grams of All-For-Reef Powder is enough to make 5 litres of dosing solution and 1600g is enough to make 10 litres.
$97.80
ALL-FOR-REEF is an easy- to-use, highly concentrated solution for the supply of ALL essential minerals and trace elements in new or moderately stocked reef aquariums.Minerals are consumed through the growth of organisms and other processes in the aquarium and must therefore be supplemented regularly. These include mainly the necessary elements calcium, magnesium and strontium and carbonate hardness elements for the growth of the calcareous skeletons of stony corals, red coralline algae and other reef organisms. ALL FOR REEF contains all these components in highly concentrated form and also contains the most important trace elements: Iodine, bromine and fluorine for growth and stabilization of the skeletons of stony corals, sponges and crustaceans; selenium to eliminate free radicals; molybdenum and vanadium for the establishment of important enzyme complexes.With these components, co-ordinated in their concentration ratio, ALL-FOR-REEF creates excellent care conditions in only one solution. No additional compounds are created (e.g. sodium chloride) that alter the salinity or the ion balance. Benefits Complete mineral supply in only one solution The most important trace elements are already included (all elements of the Tropic Marin K+ ELEMENTS & A- ELEMENTS) No formation of by-products (e.g. sodium chloride); the salinity and the ion balance are not altered No formation of excess carbon dioxide Suitable for an aquarium stocked with soft corals, LPS, SPS, other filter feeders and/or crustaceans Easy to use - Suitable both for manual dosing and for dosing pumps InstructionsStart with a daily dose of 5 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume. Increase the daily dosage - by continuous control of the alkalinity - weekly by 2.5 ml per 100 litres (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9 dkH is reached.Do not exceed a maximum daily dose of 25 ml of ALL-FOR-REEF per 100 litres (26 US-gal) of aquarium system volume.500 ml ALL-FOR-REEF contain 20,000 mg calcium, 950 mg magnesium, 390 mg strontium, 2,800 carbonate hardness and 17 mg iodine.
$59.55
Tropic Marin Pro-Coral K+ Elements In addition to calcium and carbonate hardness, coral growth also requires a series of essential trace elements, for example, in order to fulfill key requirements of the metabolism and skeleton structure of invertebrates. In seawater there are tiny quantities of these elements, which are consumed in a short time by coral growth and other processes. Regular supplementation of these trace elements is therefore unavoidable.Following extensive scientific analysis of water and coral skeleton samples, Tropic Marin K+ ELEMENTS and A-ELEMENTS were developed, with these containing cationic and anionic trace elements required for reef aquariums in optimally-dosed quantities. Benefit of Using Tropic Marin Pro-Coral K+ Elements Essential anionic and cationic trace element supplements in a liquid form A complete profile of the essential trace elements with only two solutions K+ ELEMENTS contains cations of the trace elements barium, chrome, cobalt, iron, copper, manganese, nickel, strontium and zinc in pure mineral form A-ELEMENTS contains anions of the trace elements bromine, fluorine, iodine, lithium, molybdenum, selenium and vanadium in pure mineral form Supports ideal growth and natural coloration of corals and invertebrates No bleaching of the coral due to lack of trace elements Easy to apply - suitable both for manual dosing and for dosing pumps How to use K+ Elements from Tropic Marin For a complete trace elements supply, we recommend the use of both trace element solutions: Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand of trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Recommended Maximum Dosage of Tropic Marin K+ Elements Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Use the new dosing calculators for an easy determination of the required amount of dosage for your aquarium: A- ELEMENTS K+ ELEMENTS Where calcium is added with BIO-CALCIUM the supplementation of trace elements should occur to the amount of the added calcium: 5 ml trace elements to 5 ml BIO-CALCIUM. The regular dosing of the trace elements can be automated with an aquarium dosing pump.
$59.55
Tropic Marin Pro-Coral A- Elements In addition to calcium and carbonate hardness, coral growth also requires a series of essential trace elements, for example, in order to fulfill key requirements of the metabolism and skeleton structure of invertebrates. In seawater there are tiny quantities of these elements, which are consumed in a short time by coral growth and other processes. Regular supplementation of these trace elements is therefore unavoidable.Following extensive scientific analysis of water and coral skeleton samples, Tropic Marin K+ ELEMENTS and A-ELEMENTS were developed, with these containing cationic and anionic trace elements required for reef aquariums in optimally-dosed quantities. Benefits of Tropic Marin Pro Coral A- Elements Essential anionic and cationic trace element supplements in a liquid form ; A complete profile of the essential trace elements with only two solutions K+ ELEMENTS contains cations of the trace elements barium, chrome, cobalt, iron, copper, manganese, nickel, strontium and zinc in pure mineral form A- ELEMENTS contains anions of the trace elements bromine, fluorine, iodine, lithium, molybdenum, selenium and vanadium in pure mineral form Supports ideal growth and natural coloration of corals and invertebrates No bleaching of the coral due to lack of trace elements Easy to apply - suitable both for manual dosing and for dosing pumps Instructions for dosing A- Elements from Tropic Marin For a complete trace elements supply, we recommend the use of both trace element solutions: Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand of trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Recommended Maximum dosage of A-Elements Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Use the new dosing calculators for an easy determination of the required amount of dosage for your aquarium: A- ELEMENTS K+ ELEMENTS Where calcium is added with BIO-CALCIUM the supplementation of trace elements should occur to the amount of the added calcium: 5 ml trace elements to 5 ml BIO-CALCIUM. The regular dosing of the trace elements can be automated with an aquarium dosing pump.
$59.55
Tropic Marin Pro-Coral A- Elements In addition to calcium and carbonate hardness, coral growth also requires a series of essential trace elements, for example, in order to fulfill key requirements of the metabolism and skeleton structure of invertebrates. In seawater there are tiny quantities of these elements, which are consumed in a short time by coral growth and other processes. Regular supplementation of these trace elements is therefore unavoidable.Following extensive scientific analysis of water and coral skeleton samples, Tropic Marin K+ ELEMENTS and A-ELEMENTS were developed, with these containing cationic and anionic trace elements required for reef aquariums in optimally-dosed quantities. Benefits of Tropic Marin Pro Coral A- Elements Essential anionic and cationic trace element supplements in a liquid form ; A complete profile of the essential trace elements with only two solutions K+ ELEMENTS contains cations of the trace elements barium, chrome, cobalt, iron, copper, manganese, nickel, strontium and zinc in pure mineral form A- ELEMENTS contains anions of the trace elements bromine, fluorine, iodine, lithium, molybdenum, selenium and vanadium in pure mineral form Supports ideal growth and natural coloration of corals and invertebrates No bleaching of the coral due to lack of trace elements Easy to apply - suitable both for manual dosing and for dosing pumps Instructions for dosing A- Elements from Tropic Marin For a complete trace elements supply, we recommend the use of both trace element solutions: Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand of trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Recommended Maximum dosage of A-Elements Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Use the new dosing calculators for an easy determination of the required amount of dosage for your aquarium: A- ELEMENTS K+ ELEMENTS Where calcium is added with BIO-CALCIUM the supplementation of trace elements should occur to the amount of the added calcium: 5 ml trace elements to 5 ml BIO-CALCIUM. The regular dosing of the trace elements can be automated with an aquarium dosing pump.
$42.65
Tropic Marin Pro-Coral K+ Elements In addition to calcium and carbonate hardness, coral growth also requires a series of essential trace elements, for example, in order to fulfill key requirements of the metabolism and skeleton structure of invertebrates. In seawater there are tiny quantities of these elements, which are consumed in a short time by coral growth and other processes. Regular supplementation of these trace elements is therefore unavoidable.Following extensive scientific analysis of water and coral skeleton samples, Tropic Marin K+ ELEMENTS and A-ELEMENTS were developed, with these containing cationic and anionic trace elements required for reef aquariums in optimally-dosed quantities. Benefit of Using Tropic Marin Pro-Coral K+ Elements Essential anionic and cationic trace element supplements in a liquid form A complete profile of the essential trace elements with only two solutions K+ ELEMENTS contains cations of the trace elements barium, chrome, cobalt, iron, copper, manganese, nickel, strontium and zinc in pure mineral form A-ELEMENTS contains anions of the trace elements bromine, fluorine, iodine, lithium, molybdenum, selenium and vanadium in pure mineral form Supports ideal growth and natural coloration of corals and invertebrates No bleaching of the coral due to lack of trace elements Easy to apply - suitable both for manual dosing and for dosing pumps How to use K+ Elements from Tropic Marin For a complete trace elements supply, we recommend the use of both trace element solutions: Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand of trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Recommended Maximum Dosage of Tropic Marin K+ Elements Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Use the new dosing calculators for an easy determination of the required amount of dosage for your aquarium: A- ELEMENTS K+ ELEMENTS Where calcium is added with BIO-CALCIUM the supplementation of trace elements should occur to the amount of the added calcium: 5 ml trace elements to 5 ml BIO-CALCIUM. The regular dosing of the trace elements can be automated with an aquarium dosing pump.
$42.65
One of the three-part original balling method, Tropic Marin components add calcium, alkalinity, and sodium chloride free sea salt to maintain the crucial balance of elements in your aquarium's water. The balanced mixture allow for fast growth of coral skeletons while maintaining the major and minor trace elements to avoid the decrease in required elements like traditional two-part dosing regimens. Features Maintains ion equilibrium Powdered Salt Mixture No unnatural by-products Mixes fast & clear within minutes Made with pharmaceutical components Add by hand or with automated dosing pumps Does not contain phosphates or other pollutants InstructionsDissolve the appropriate amount of the salt separately, as indicated on the box, in individual containers containing RODI water. Once mixed and clear the solutions are then ready to use. The amount to dose is as simple as dosing equal quantities of the separate solutions daily or varying quantities of each separate solution to achieve the recommended levels in the aquarium. These separate solutions are very stable and can be stored indefinitely.
$30.75
