In order to ensure proper operation and efficiency of your Lifegard sterilizer all bulbs and quartz sleeves should be changed on a yearly basis.It is highly recommend when you change your bulb that you use the silicon lubricant to ensure the bulb is not damaged.The bulb fits the Lifegard ProMax 90W UV Sterilizer. Manufacturer Part Number: R450201
IceCap CO2 Scrubber - Small
Raise pH in Your Reef Aquarium with an
Overview
The pH in a reef tank should be around 8.3 for optimal coral growth. If you're struggling to maintain pH or if your aquarium suffers from chronically low pH, connecting an IceCap CO2 scrubber to the air intake of your protein skimmer is a great way to increase and keep your pH level within ideal ranges.
Run This Simple Test to See if a CO2 Scrubber Will Help You
The Carbon Dioxide (CO2) level in your home or office may be contributing to the low pH level in your saltwater aquarium. A house full of people and pets affects the pH in your tank. In fact, it's usually the cause of low pH in a home aquarium. An experiment you can perform to find out if this is the culprit behind your low pH is to open up the windows and doors in your home for a day to let the excess CO2 escape. After 24 hours, test your aquarium's pH. If the pH level has risen, you can be pretty confident that the CO2 load in your home is high and that a CO2 scrubber will help. Since keeping the windows and doors of your home open all the time isn't an option for most people, a CO2 scrubber is an easy and affordable way to remove CO2 gas so that it doesn't suppress the pH of your aquarium water.
Installing is Super Easy
The IceCap CO2 Scrubber can be installed on just about any aquarium with a protein skimmer. Just connect the tubing from the air intake of your protein skimmer to the output side of the CO2 scrubber. You may be able to remove the silencer from your protein skimmer. Next, remove the lid of the scrubber and fill the reactor with IceCap Carbon Dioxide Adsorption Media (or your preferred CO2 absorbent media) and place it back inside the scrubber. Finally, put the lid back on the scrubber and tighten it. Test the pH level of your aquarium water hourly (or as frequently as possible) during the first few days of use. Once the pH level begins to drop (usually after 2-4 weeks), it's time to replace the media inside. Most carbon dioxide removal media changes colors once it's depleted, so you'll likely have a visual indicator as well to help you determine when it's time to swap it out.
Running a CO2 Scrubber Helps Raise and Maintain pH
The IceCap CO2 Scrubber will not only raise your pH by a couple of points, but it will also help maintain it at higher levels. Having low pH results in slower coral growth, so by boosting it with the IceCap CO2 scrubber, you'll be able to achieve faster growth and experience fewer pH swings. With your pH level stable, coral growth and nutrient uptake will increase. Calcium and magnesium consumption are also likely to increase as you raise the pH level, so be sure to continue testing your major water parameters along the way to ensure your reef flourishes.
Specifications
Body Size: 4 inch
Media Capacity: Approx. 0.5KG
Footprint: 4.5 x 4.5in
Height: 6.5"
Hang-On Bracket Included: Yes
Fluval AquaClear AC70/110 Carbon Insert - 3 Pack
Overview
Activated Carbon improves water clarity in fresh and saltwater aquariums. It provides superior adsorption qualities, eliminating odors, discolorations and impurities.
Features
Premium, research-grade chemical filter media
Helps promote healthy, crystal clear water
Highly adsorbent - removes odors, discolorations and toxins
Improves fish health
Will not raise phosphate levels
For best results, replace every 4 weeks
For use in freshwater and saltwater aquariums
Hagen Part Number: 19646
Lifegard Aquatics introduces the Pro-MAX UV Sterilizer, featuring a patent-pending, flow-through design with less restrictive angled inlet and outlet ports requiring less plumbing. This unique design enables easy installation of new or replacement systems as it can be positioned in multiple ways to fit any tight space.Available with 3" housing in 25, 40, 55, 90 and 120 Watt models and 5" housing in 55, 90 and 120 Watt sizes.Each Pro-MAX Features
High Output UV Bulb
Internal Protective Sleeve
UL Listed Ballast which counts down the number of days until you need to replace the bulb.
Maximum Operating Pressure 30 PSI.
Specifications
Wattage: 55 Watts
Total Current Draw: 1.2A
Lamp Life: 9,000 Hours
Max Flow Rate: 2,100 GPH
Max Aquarium Size: 350 Gallons
Max Pond Size: 6,000 Gallons
Dimensions: 26.7-27"L (depending on configuration) x 4.51"W x 9"H
Inlet/Outlet: 2"
For Protozoa 180,000 uW/cm2 - Cut down the flow rate by minimum 1/6th. Monitor the temperature when reducing the flow as low flow may result in extra heat that can cause damage to the UV and system.All HO UV Sterilizers have 2" Union Inlet/Outlet."Suggested" Water Flow Rates are New Lamp Conditions. All water flow rates incorporate a 90% UV transmittance factor. UV Lamp Useful "Effective" Life is 9,000 hours.
Two Little Fishies Phosban Reactor 150 Pro Package
Overview
The Phosban Reactor from Two Little Fishies is specifically designed to contain phosphate removal medias or any other granular media such as activated carbon, nitrate sponge, etc.
Made to be mounted anywhere on the aquarium, the fluidized design of the reactor will increase the efficiency of the media.
Maximum recommended flow rate of 80 to 90 gph. (Quiet One 400 works great!)
Each reactor comes with a ball valve for flow adjustment and hose clamps. Supply your own pump and 1/2" I.D. tubing and it is ready to operate.
Specifications
Footprint: 14.25"x3.25"
Capacity: Up to 150 Gallons
Max Flow Rate: 80 - 90 gph
What's Included
2 Phosban 150 Reactors
1 Quiet One 400 Pump
1 Rowa-Phos 500ml
1 Reef Crest 800g Carbon
5 Feet 1/2 Tubing
This package is meant to utilize the phosban reactors in series, running off of one Quiet One water pump.
Tidal Power Filters are designed from the ground up to provide your aquarium with high-quality, comprehensive filtration. They are easy to use and adaptable to a variety of aquarium conditions. With a host of features including a self-priming pump, dual water intake with surface skimmer, adjustable flow, maintenance monitor, self-cleaning impeller, and a filter basket that holds any kind of filtration media - and more of it.Tidal Power Filters are designed to deliver the highest water quality possible with maximum versatility and ease of use. They are suited to a wide variety of aquarium setups from saltwater to freshwater, ranging in size from 35 gallons to 110 gallons. All Tidal Filters have a 3 year warranty that can be extended to 5 years by registering your filter.Key Features Lid turns into a tray for the media basket when doing maintenance Maintenance monitor alerts you when to clean filter The large capacity design of the filter basket allows for any type of Seachem filter media, which can be interchanged and placed in custom configurations. All Tidal Filters come with Seachem's Matrix bio-media and a foam filter to get you started. Adjustable leveling device Adjustable intake flow Self-priming pump & self-cleaning impeller Optional heater holder The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, and deeper in the tank removing floating debris Fully adjustable flow regulation adjusts performance to a specific aquarium volume, type, or provide an environment for fish which prefer more or less water movement or oxygenation. Innovative Design Ventilation slots in the lid of the filter and aeration grooves in the outflow ensure that water returned to the tank is fully oxygenated and maximize gas exchange during filtration. The pump pushes water up into the basket of the filter, entering through the bottom of the basket and being pushed out the top. A bottom-to-top flow ensures that water comes into contact will all filter media, and cannot go around or over filter media as with hang on back filters with a back-to-front flow. The pump is also insulated and silent, making it excellent for office or dining room aquariums, and has extremely low power consumption for the amount of output - the large Tidal 110 filter uses only 12 watts. Over time, filtration media can become clogged with detritus and prevent water from flowing through. When this happens in the Tidal Filter, water is redirected around the filter and back into the aquarium through an outlet to the side. When this happens, the redirected water pushes up the blue maintenance monitor on the top of the filter, letting the aquarium keeper know that the filter media needs to be cleaned out. The basket is designed with raised slots which catch detritus rather than allowing it to fall through back into the filter when flow is stopped. A heater can be attached to the side with an optional heater clip, allowing for better dispersal of heated water through the aquarium. Versatile The adjustable telescoping intake allows water to be taken from any level of the tank without the need to stop the filter or bother with spare parts. Dual Water Intake. The surface skimmer will capture the water from just below the surface, where excreted fish oils accumulate, and deeper in the tank removing floating debris. A dial on the side of the filter adjusts how much flow comes from the underwater intake versus the surface skimmer. The flow on the pump is adjustable using the dial on the front, from the powerful full flow rate of 450 gallons per hour on the Tidal 110 down to a gentle 90 gallons per hour on the same filter. Water recirculates within the filter, so turning the flow rate down will not wear the pump down or cause problems within the filter. The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice (No cartridges A leveler on the base of the filter lets the filter adjust to a variety of aquarium styles. Easy to Use Self-priming pump means there is no need to fill the filter basket with water, start a siphon, monitor the filter, or any of the other headaches of starting a new filter. This also means that filter will restart itself with no trouble after a power outage or after maintenance. The self-cleaning, non-corrosive impeller suited for both saltwater and freshwater environments. This cuts down on maintenance and makes the filter suitable for a wide range of environments. The basket is fully removable and snaps into the lid of the filter for easy and drip-free transit to a sink or hose for cleaning The filter basket has a huge capacity to hold filtration media of your choice in the configuration of your choice (No cartridges). All Tidal Filters come with Seachem's Matrix bio-media to get you started. Specifications Aquarium Size: Up to 75 Gallons Flow Rate: 350 gallons per hour Power Consumption: 8 watts Filter Volume: 1.9 Liters (0.50 Gallons) Dimensions: 10-1/8"L x 6-1/4"D x 9-1/8"H Matrix Included: 350ml Wall Clearance Required: 3.5" For user manual and more information, visit the links page.
Modern Skimmer Design & FunctionalityThe IceCap K1 Nano is a remarkably compact skimmer that offers a new level of refined filtration for marine aquariums ranging from 10 to 30 gallons. All aspects of the skimmer were implemented to surpass many challenges other skimmers on the market misses out on. Included magnet mount allows for easy placement on surfaces up to 1/2in thick.Compact & Built to LastMaster crafted from robust PVC and high-quality acrylic. All components are marine safe and refined in every aspect to provide the latest enhancements in foam fractionation and the highest in quality. An impressively compact footprint makes it the ideal candidate for tight compartment applications. Every aspect of the skimmer disassembles completely for easy service.Quiet Performance & ControlAt the Core of the IceCap K1, you will find the DCair 200 skimmer pump built to provide efficient performance. The pipeless output offers fine-tuning and trouble-free underwater outflow plus quiet operation. Our pipeless design not only saves on space but also allows the outgoing water to exit on the side of the skimmer and below the water surface providing splash-free circulation in the sump.Bioload HandlingThe bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system.Features Magnet Mount Distinctive Turbulence Reducing Body Solid PVC & Acrylic Construction Bubble Dispersant Chamber Pipeless Output Valve Efficient & Quiet Operation Disassembles Completely for Easy Cleaning & Maintenance In-Sump Installation Only Specifications Skimmer Body: 2in Footprint: 2.7in x 3.2in Footprint with mount: 4.75 x 3in or 3.5 x 4in Total Height: 13in Magnet Mount: Up to 1/2in thick Pump: DCair 200 Pinwheel pump operation at 26gph and 5 watts.
Bubble Magus Curve 5 Elite Protein Skimmer
Overview
The Bubble Magus Curve 5 Elite Protein Skimmer employs the use of a Sicce PSK water pump that allows the generation of more air, more efficiently, giving you a better performing skimmer in a smaller package.
These skimmers are designed to be used in sump, have a small footprint, and are made of quality cell cast acrylic.
Features
High quality polished cell cast acrylic body
Long lasting efficient skimmer pump
Needle wheel impeller for optimal micro-bubbles
Innovative features
Stylish space saving design
Efficient venturi
High air suction
Specifications
Footprint: 7.3" x 7.1"
Height: 18.5"
Aquarium Size: Up to 130 gallonsRecommended running level: 9.5" - 11" water depth
Pump: Sicce SK-200
Power Consumption: 18 watts, 120 V ~ 60 Hz / 0.6 A
Pump output = 375 GPH
Air intake = 300 LPH
Aqueon Quiet Flow LED Pro Power Filter - Model 10
Overview
Aqueon QuietFlow Power Filters and cartridges were designed with the fish and the aquarist in mind. The patented designs include unique features to enhance water quality and clarity, increase oxygen levels and lessen noise.More Stages and Filtering Capacity
Aqueon Power Filters feature four stages of filtration - mechanical, chemical, and biological and wet/dry - for the clearest cleanest oxygen-enriched water. The Patented Aqueon dual-sided replaceable dense-floss cartridges contain over 25% more activated carbon than the leading brands and have been designed to ensure even distribution of carbon throughout.Higher Flow Rates
Aqueon filters have higher flow rates than the competition to ensure proper turnover for cleaner water and higher dissolved oxygen content, making fish healthier and more active.Superior Biological Filtration
The patented biological grid has a large surface area to support more of the beneficial bacteria that eliminates ammonia and nitrates. A second wet/dry grid provides further biological filtration and oxygenation as the water returns to the aquarium.New Internal Pump Design
Since the filter pump is submersed in the aquarium, there is no need for priming at setup or when restarting the filter after cleaning or power interruptions. An internal pump also allows for virtually silent operation, continuous flow rates, less chance for leaks and physically, a much thinner profile.
Aqueon Power FIlter Four Stage Advanced Filtration System
Stage 1 - Dense floss removes particles and debris.
Stage 2 - Activated carbon removes toxins, odors and discoloration.
Stage 3 - Patented Bio-Holster removes toxic ammonia and nitrites.
Stage 4 - Diffuser grid removes additional toxins while adding oxygen for more active fish. It also reduces splashing makes the return exceptionally quiet.
The QuietFlow 10 is suitable for freshwater or marine aquariums up to 20 gallons.
Eheim Classic Canister Filter 350
Overview
By choosing a classic you can't go wrong - you have chosen a reliable, million fold tried and tested piece of equipment.
All models perform to the highest quality standards. First class components and carefully matched features ensure perfect pump and filter performance. Additionally, you have the proverbial Eheim quiet running, robust durability and low energy consumption. You will be very satisfied.
Features
Million fold tried and tested
Exceptional value for the money
Very quiet running low energy consumption
Long-lasting flexible silicon sealing ring in pump head (for easy and safe replacement after cleaning)
Can be filled with filter pads and/or loose filter media
Comes with spray bar, inlet pipe, hose and installation accessories
Versatile accessories.
Ideal for aquariums around 30 gallons, suitable for aquariums up to 90 gallons
Filter Volume: 4 Liters
Power Consumption: 15 watts
Circulates approximately 155 gallons per hour
Maximum head height of approximately 6 feet
Height: 14.6"
Uses Eheim 12/16mm hose
Suitable for freshwater or marine aquarium uses.
<
Hagen Fluval FX4 Canister Filter **Value Pack**
Overview
Includes additional media at great savings!*
Building on the mighty FX performance and reliability platform, the all-new FX4 high performance canister filter is a compact 'little brother' to the FX6. The FX4 bridges the gap between the Fluval 406 and the FX6 canister filter, making it an ideal choice for aquariums up to 250 US Gal (1000 L).
Features
Multi-stage filter pumps out 700 gallons (2650 L) of water per hour
Smart Pump - advanced microchip technology continuously monitors and optimizes pump performance
Self-starting - just add water, plug in and Smart PumpTM will take over. Trapped air auto-evacuated every 12 hours to ensure maximum efficiency
Easy water changes eliminate need to carry heavy buckets. Simply attach hosing to output (Kit sold separately) and Smart PumpTM does the rest
Removable, stackable media baskets eliminate water bypass and hold a total of 1 gallon (3.9 L) of media
All filter media included - mechanical, chemical and biological
Aqua-Stop valves with leak-proof Click-Fit attachment system
Valves positioned at convenient 45-degree angle for easy installation and rotation
Anti-clog, telescopic strainer ensures continuous water flow
Multi-Directional Output nozzles can be fully adjusted to create customized water flows
Utility Valve with drain hose for easy maintenance and flushing of canister
Rubberized feet help ensure quiet operation
Compact 16.5in tall design - easily fits under most aquariums
Made in Italy
For use in freshwater and saltwater aquariums
Specifications
700GPH Flow rate at zero head
All filter media included + and added bonus supply of Biomax and Carbon
16.5" in height
Consumes only 30W operating at 120V.
Filtration Volume: 14 Liters (3.7 Gallons)
*When purchasing from J&L Aquatics you will receive 3-100g Carbon, 500g BioMax, FX4 Foam, FX4 Fine Filter Pads, and FX4 Polishing Pads an approximate MSRP value of $83.41!
Lifegard Aquatics introduces the Pro-MAX UV Sterilizer, featuring a patent-pending, flow-through design with less restrictive angled inlet and outlet ports requiring less plumbing. This unique design enables easy installation of new or replacement systems as it can be positioned in multiple ways to fit any tight space.Available with 3" housing in 25, 40, 55, 90 and 120 Watt models and 5" housing in 55, 90 and 120 Watt sizes.Each Pro-MAX Features
High Output UV Bulb
Internal Protective Sleeve
UL Listed Ballast which counts down the number of days until you need to replace the bulb.
Maximum Operating Pressure 30 PSI.
Specifications
Wattage: 90 Watts
Total Current Draw: 1.2A
Lamp Life: 9,000 Hours
Max Flow Rate: 2,800 GPH
Max Aquarium Size: 650 Gallons
Max Pond Size: 11,000 Gallons
Dimensions: 31.2-32.5"L (depending on configuration) x 4.51"W x 9"H
Inlet/Outlet: 2"
For Protozoa 180,000 uW/cm2 - Cut down the flow rate by minimum 1/6th. Monitor the temperature when reducing the flow as low flow may result in extra heat that can cause damage to the UV and system.All HO UV Sterilizers have 2" Union Inlet/Outlet."Suggested" Water Flow Rates are New Lamp Conditions. All water flow rates incorporate a 90% UV transmittance factor. UV Lamp Useful "Effective" Life is 9,000 hours.
Aqua UV Classic Replacement Bulb - 57 Watt
Overview
High-output 57W replacement lamp engineered to maintain superior UV sterilization in your Aqua UV Classic sterilizer for aquariums up to 600 gallons.
Features
Robust low-pressure mercury arc lamp
Patented slimline design lasts up to 14 months continuous operation
Standard 4-pin connector for plug-and-play installation
Compatible exclusively with Classic 57W units
UL listed for indoor and outdoor aquarium use
The compact Reef Octopus Classic 2000-HOB is a proverbial favorite amongst hang-on back protein skimmer users providing beneficial filtration for aquariums up to 140 gallons.With it's unique design, the pump is mounted externally and under the actual skimmer body reducing the requirement for the room needed behind the aquarium and less heat-to-water exchange.The Reef Octopus Classic 2000-HOB is constructed of high-quality acrylic and equipped with the new highly efficient Aquatrance pinwheel pump that produces an ideal mix of water and air for optimal waste removal. Features: Low profile body allows for closer to the wall installations. Low heat exchange Pump mounted externally Surface skimmer increases efficiency Air silencer reduces noise Solid Acrylic construction Specifications: Footprint: 10" x 4" Height: 21" Pump: Aquatrance 2000s pinwheel pump operating at 18 watts Air Draw: 720lph (results will vary depending on aquarium set-up) Water Draw: 198gph (results will vary depending on aquarium set-up) Rated for aquariums up to 140 gallons with light bio-load 1 year limited manufacturers warranty on skimmer, and 2 year limited manufacturers warranty on pump.
The Classic 100-HOB is a proverbial favorite amongst hang-on back skimmer users capable of filtering aquariums up to 105 gallons.The Classic 100-HOB features an easy to install and operate design in which the pump is mounted inside the aquarium. To install, simply place the skimmer on the back of the aquarium, mount the pump in place, adjust the intake strainer and it is ready to skim.The Reef Octopus Classic 100-HOB is constructed of high-quality acrylic and equipped with the new highly efficient Aquatrance pinwheel pump that produces an ideal mix of water and air for optimal waste removal. Features:
Low profile body - takes up less aquarium space Air silencer helps reduce noise Solid construction and proven track record Adjustable surface skimmer attachment
Specifications: Footprint: 8.75" x 3.75" Height: 17" Pump: Aquatrance 1000s Pinwheel pump operating at 9 watts Air Draw: 420lph (may vary depending on aquarium set-up) Water Draw: 350lph (may vary depending on aquarium set-up) 1 year limited manufacturers warranty on skimmer, and 2 year limited manufacturers warranty on pump.
Red Sea ReefMat Sump Modification Kit
Overview
Sump modification kit for G1 Reefers to in stall the ReefMat Fleece Filter
Everything you need to make your installation fast and easy
Red Sea Reefer Skimmer 300
Overview
Our high-performance REEF-SPEC Skimmers feature a combination of PSK pumps with proportionally sized venturi, bubble diffusor and reaction body that optimizes air-water contact time for steady waste removal.
Designed with hobbyists needs in mind, the REEFER Skimmer is whisper quiet thanks to rubber connectors which dampen the vibrations as well as a robust air silencer. With features like the FoamView window, built-in neck cleaner and extra-long valved waste tube, we guarantee an enhanced home reef filtration experience.
Features
Ergonomic diffusion chamber evenly disperses the fine bubbles created by the Sicce PSK pump across the skimmer cone, without reducing air or water flow.
Quiet operation, with vibration absorbing components and a large air intake silencer.
3 assembly options for flexible positioning of the pump inlet and regulation valve, according to your sump.
FoamView window in the collection cup to easily monitor and adjust the foam height.
Built-in manual neck cleaner.
Precision geared valve for positive flow regulation.
Quick release pump holder for ease of maintenance.
Drainage port with 1m valved hose.
Specifications
SPS Tank Capacity: 300 Litres / 80 Gallons
Mixed Reef Capacity: 600 Litres / 160 Gallons
Fish Only Capacity: 900 Litres / 240 Gallons
Sicce Pump Model: PSK-600
Air Flow: 500 LPH / 130 GPH
Water Flow: 1000 LPH / 265 GPH
Height: 21 Inches (53cm)
Recommended Water Height: 6-8" (16-20cm)
IN a saltwater aquatic environment, debris and other organic materials can dissolve into fine particles which cannot be removed with a carbon cartridge alone; protein skimming is needed.Protein skimming is the process of using micro bubbles (or foam) to lift dissolved debris from water, making water cleaner, clearer, and healthier for saltwater livestock and corals.The Coralife Marine Filter with Protein Skimmer has an adjustable air flow dial that controls the volume of micro bubbles generated. Debris is collected in a cup that can be easily removed and emptied.Features Protein skimmer with removable collection cup - Skimmer cup collects debris and harmful waste from water - maintenance is quick and easy. Motor equipped with needle wheel impeller optimizes skimming by creating more bubbles then a traditional pump. Multiple filtration layers for diminished micro bubble entry into the aquarium. Reduced maintenance with optimally designed skimming collection cup. Skimming not affected by water level fluctuations. Adjustable air flow controls volume of micro bubbles thus controlling intensity of skimming bubbles. Phosphate remover specialty media pad helps to remove excess phosphates that contribute to algae growth, traps waste, food and other organic debris. Large carbon cartridge with dual sided dense floss containing activated carbon. Heater clip accommodates an Aqueon pre-set heater (up to 100W) - heater sold separately. Suitable for marine aquariums up to 30 gallons. Ideal for nano reefs/aquariums and quarantine tanks. Each Coralife Marine Filter with Protein Skimmer comes with a large carbon cartridge and the phosphate remover specialty filter pad.
Fluval AquaClear AC50 Carbon Insert - 3 Pack
Overview
Activated Carbon improves water clarity in fresh and saltwater aquariums. It provides superior adsorption qualities, eliminating odors, discolorations and impurities.
Features
Premium, research-grade chemical filter media
Helps promote healthy, crystal clear water
Highly adsorbent - removes odors, discolorations and toxins
Improves fish health
Will not raise phosphate levels
For best results, replace every 4 weeks
For use in freshwater and saltwater aquariums
Hagen Part Number: 19644
The Nyos TORQ G2 is an innovative high-performance system reactor in a modular design for all types of filter media, such as active carbon, phosphate remover (GFO), zeolite and bio pellets.Filter media are an essential part of maintaining good water quality in an aquarium. They help remove excess pollutants and raise water quality. Often media are simply placed in filter bags, this leads to channeling where all the media does not come into contact with the water. Leaving its full capacity unused.Nyos has developed the innovative TORQ G2 system reactor as a simple and elegant solution to the problem of aquarium filtration. The TORQ G2 produces an even water flow throughout the chamber giving ideal conditions for any choice of filter media.ControllableBy turning the cap it is possible to seamlessly adjust and precisely control the flow with a hand, without reaching into the water. The sophisticated controllability means the flow speed can be optimally set to the type and amount needed by the respective filter medium.ModularThe Nyos TORQ G2 is an innovative system reactor for all types of filter media. The TORQ Dock is equipped with an integrated pump and constitutes the base unit. The Dock is equipped with a universal connector, which allows TORQ G2 reactor bodies of all available sizes to be inserted. FRUSTRATION-FREE With the Nyos TORQ G2, we have deliberately avoided screws, hoses and valves. Allowing, filter media to be changed in seconds with ease and free of frustration. Frustration FreeWith the Nyos TORQ G2, we have deliberately avoided screws, hoses and valves. Allowing, filter media to be changed in seconds with ease and free of frustration. Plug-and-PlayThe required pump is already included in the TORQ G2 Dock. Simply place the body with the medium on the Dock and insert. Done. Two-In-OneOne reactor, two media - In the TORQ G2 bodies 1.0 and 2.0, it is possible to use two different filter media at the same time by inserting a chamber separator.Additional features of the New Generation Twist Lock - Mini bayonet closures ensure secure lock for the lid and bottom insert and allow for easy media change. Micro Grid Instead of Sponge - The innovative micro grid of the Nyos Torq G2 bodies offers the following advantages compared to the classic filter sponge in conventional media reactors. Significantly longer run time as the grid does not clog quickly Is much better at retaining fine filter media More volume for filter media Comes in two sizes (0.8mm and 1.5mm hole diameter) New Water Injection - Optimized water injection for more laminar flow Suction Cups Instead of Silicone - The Nyos Torq G2 Dock now has suction cups. They ensure a stable hold and more convenient flow adjustment. SpecificationsMaximum Flow: 1000l/h (264 gph)Power Consumption: 12 WattsHeight: 4.3" (11cm)Width/Depth: 6.4" (16.2cm)Note: You will need to also purchase a reactor media body in order to have a complete set-up.
Durable, reusable filter media for any filtration method in marine or freshwater aquariums. Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system. Aqua Mesh filter media has many other unique applications including vibration reduction, temporary baffles or sump refugium separation.Aqua Mesh Blue filter media is designed to be used as the third stage (if using all four), and will trap smaller to medium sized particles. Dimensions: 19" x 24" x 1.5"
Compact yet powerful, the PS2 Protein Skimmer helps remove dissolved organic compounds and other harmful substances from your nano aquarium before they have a chance to break down into dangerous waste.Features Designed for saltwater aquariums between 5 and 20 gallons 32 needle-wheel impeller increases air-to-water contact ratio, creating ideal bubble size for maximum protein collection Adjustable flow regulators control amount of air entering reaction chamber to produce perfect amount of skimmate Adjustable water-level control valve regulates skimming performance Large reaction chamber mixes air and water effectively to remove organic waste from water molecules Clear collection cup allows for easy monitoring of waste and removal for cleaning Versatile mounting options - adjustable hanging bracket and suction cups included Modular design is easy to access and clean Specifications Dimensions: 3L x 3W x 10 H" (8L x 8W x 26 H cm) Power Consumption: 8 Watts Cord Length: 1.8m (5.9ft) Minimum clearance above water line: 3.75" (9.5 cm)
Klir Di-4 Fleece Filter - Version 2
Overview
The Klir Filter automatically unrolls new filtering material, removing suspended particles from your aquarium and producing crystal clear water.
The Patent Pending Klir Fleece Filter Di-4 fits directly into most 4in filter sock chambers that automatically unrolls new material as it gets clogged, removing suspended particles from your aquarium and producing crystal clear water. Enjoy maintenance-free aquarium filtration for months at a time.
Klir filter is a direct replacement filter socks on sumps with sock trays.
Simply remove your sock and insert the Klir. As water passes through the Klir filter and the filtering material becomes saturated with waste, the water level will begin to rise. When the water makes contact with the optical sensor, a motor is activated to advance clean filtering material. As clean material is exposed, water is now able to flow freely, lowering the water level in the sock tray and deactivating the motor.
Benefits
Easy drop-in installation - no plumbing required. No additional sump space is needed.
Results in crystal clear water filtered down to 50-microns - double the filtering capacity of most filter-socks.
Waste is removed from the water column before it has time to breakdown, helping to maintain low nutrient parameters!
The constant chore of monitoring and swapping filter socks or other mechanical media every few days is eliminated for months at a time. Once the filtering media is exhausted, replacing it is a snap and very economical.
Features
New upgraded Version 2 Klir Smart ControllerTriple Optical Magnet Mount SensorEasy drop-in installation even in tight spotsFully automatic with smart controllerCompact and directly replaces 4-inch filter socksHolds 25 yards of 50- Micron fleeceCapable of filtering up to 750 GPH per unitRemovable lid with carbon insert for noise and odorsExpandable to dual units for higher flow rates-4 Fleece Filter Sump RequirementsSump with sock-tray (or use the Klir Filter Bracket) Capable of holding 1.5 inches of water above the tray8.125 inches of available space below the tray7.125 inch sump lid opening directly above the filter socksWhat's Included
Klir 4" Drop-In Automatic Fleece Filter
3.9" Swappable Collar
4.25" Swappable Collar
Version 2 Smart Controller & Magnet-mount Sensor
25-Yard Roll of 50-Micron Fleece
Activated Carbon Insert
DC Geared Motor (DC12V/.06A)
Hagen Fluval 407 Canister Filter **Value Pack**
Overview
Includes additional media at great savings!*
The Fluval 07 series marks the 7th incarnation in 4 decades of Fluval's top selling canister filter family. Not only does the latest generation incorporate the power and reliability you've come to expect from the leader in aquatic filtration, but it also features several new performance upgrades that make it up to 25% quieter and more robust, energy-efficient, Flexible and easier to use than ever before.
Features
Fluval eTEC (Efficient Technology) construction employs cutting-edge design, materials & manufacturing methods to deliver powerful pump performance, reduced energy consumption & ultra-quiet operation
Powerful motor generates constant pumping power and pressure that endures over time
Re-engineered, precision-crafted pump runs up to 25% quieter than previous generation
Energy-efficient - some 07 series filters draw as little energy as a single household LED light bulb
Redesigned, substantially enlarged rubber feet stabilizers offer superior vibration-dampening ability and added protection
New ergonomic AquaStop valves with raised lip for smoother operation
Single action dual Lift-Lock motorhead clamps for quick release and attachment
Redesigned Primer with larger easy-grip handle provides fast, effortless start-ups with just a few pumps
EZ-Lift media baskets with new center handle allow media stack to be removed with just 1 finger for quick access (less mess & no need to empty canister of water)
Unique vertical pre-filter cartridge with independent access provides more surface area and better mechanical filtration
All necessary authentic Fluval media included
Designed and manufactured in Europe
Specifications
Aquarium Size: 50-100 US Gal (150-500 L) Pump Performance: 383 US Gal/h (1450 L/h) Vertical Pre-Filter: 1074cm2Basket Volume: 4.2LTotal Chamber Volume: 6.0LCanister Volume: 9.2LFilter Dimensions: 9.5" x 7" x 19.3" (24 x 18 x 49cm) Filter Circulation: 245 US Gal/h (930 L/h) Max Water Column Height: 2.255mWattage - 120V/60HZ: 23WWattage - 230-240V/50HZ: 20WWhat's Included
Fluval Bio-Foam Max
Fluval Bio-Foam
Fluval Carbon 70 g
Fluval Quick-Clear
Fluval Bio-Foam+
Fluval AquaStop valve
Ribbed hosing
Rim connectors
Intake tube
Intake strainer
Intake Stem with intake strainer
Pre-Filter basket
Media basket
Media basket cover
Media basket handle
Suction cup (30 mm)
Output nozzle
Rubber hose connectors
Instruction manual
*When purchasing from J&L Aquatics you will receive 2x3-100g Carbon, 500g BioMax, 2x406/407 Pads, and 1 Clearmax 3-100g- an approximate MSRP value of $83.90!
Hagen Fluval 307 Canister Filter **Value Pack**
Overview
Includes additional media at great savings!*
The Fluval 07 series marks the 7th incarnation in 4 decades of Fluval's top selling canister filter family. Not only does the latest generation incorporate the power and reliability you've come to expect from the leader in aquatic filtration, but it also features several new performance upgrades that make it up to 25% quieter and more robust, energy-efficient, Flexible and easier to use than ever before.
Features
Fluval eTEC (Efficient Technology) construction employs cutting-edge design, materials & manufacturing methods to deliver powerful pump performance, reduced energy consumption & ultra-quiet operation
Powerful motor generates constant pumping power and pressure that endures over time
Re-engineered, precision-crafted pump runs up to 25% quieter than previous generation
Energy-efficient - some 07 series filters draw as little energy as a single household LED light bulb
Redesigned, substantially enlarged rubber feet stabilizers offer superior vibration-dampening ability and added protection
New ergonomic AquaStop valves with raised lip for smoother operation
Single action dual Lift-Lock motorhead clamps for quick release and attachment
Redesigned Primer with larger easy-grip handle provides fast, effortless start-ups with just a few pumps
EZ-Lift media baskets with new center handle allow media stack to be removed with just 1 finger for quick access (less mess & no need to empty canister of water)
Unique vertical pre-filter cartridge with independent access provides more surface area and better mechanical filtration
All necessary authentic Fluval media included
Designed and manufactured in Europe
Specifications
Aquarium Size: 40-70 US Gal (90-330 L) Pump Performance: 303 US Gal/h (1150 L/h) Vertical Pre-Filter: 803cm2Basket Volume: 3.1LTotal Chamber Volume: 4.5LCanister Volume: 7.3LFilter Dimensions: 9.5" x 7" x 16.5" (24 x 18 x 42cm) Filter Circulation: 206 US Gal/h (780 L/h) Max Water Column Height: 1.75mWattage - 120V/60HZ: 16WWattage - 230-40V/50HZ: 15WWhat's Included
Fluval Bio-Foam Max
Fluval Bio-Foam
Fluval Carbon 70 g
Fluval Quick-Clear
Fluval Bio-Foam+
Fluval AquaStop valve
Ribbed hosing
Rim connectors
Intake tube
Intake strainer
Intake Stem with intake strainer
Pre-Filter basket
Media basket
Media basket cover
Media basket handle
Suction cup (30 mm)
Output nozzle
Rubber hose connectors
Instruction manual
*When purchasing from J&L Aquatics you will receive 2x3-100g Carbon, 500g BioMax, 2x207/307 Pads, and 1 Clearmax 3-100g- an approximate MSRP value of $81.90!
Aqua UV Classic UV Sterilizer - 57 Watt
Overview
The Classic Series UVs are ideal for ponds aquariums and water features. The Classic's rugged design has features that allow for quick installation and easy maintenance. Aqua Ultraviolet UVs will clear your water in 3 to 5 days sometimes overnight and keep it that way. Performance is guaranteed when sized installed and operated according to our instructions. UV Sterilization is a purely physical process not a chemical one so it doesn't alter the waters chemistry taste smell or pH. This unit is designed to be plumbed in-line and will eliminate green water control bacteria and fish disease UV destroys harmful bacteria protozoa and algaeUse in fresh or saltwater aquariums and ponds as well as designed for indoor and outdoor use.
Features
When used as a freshwater sterilizer will accommodate systems from 1500 - 3000 gals with a flowrate of 3200 gph for 30,000 uw/cm2
Freshwater clarifier to 6500 gals
When used as a saltwater sterilizer will accommodate systems up to 355 gals with a flowrate of 1066 gph for 90,000 uw/cm2
Designed to be plumbed in-line.
3/4" inlet and outlet.
In order to ensure proper operation and efficiency of your Lifegard sterilizer all bulbs and quartz sleeves should be changed on a yearly basis.It is highly recommend when you change your bulb that you use the silicon lubricant to ensure the bulb is not damaged.
Fluval AquaClear AC20/30 BioMax Insert
Overview
BIOMAX nodes feature a complex pore system where beneficial bacteria can easily establish and flourish. The media shape is specifically designed to permit even water distribution, which prolongs contact time over a wider area for effective biological filtration.
Features
Premium biological filter media
Complex pore system provides large surface area for thriving beneficial bacteria growth
Promotes ammonia and nitrite reduction
Permits even water distribution, prolonging contact time for added biological filtration
For best results, replace every 3 months
For use in freshwater and saltwater aquariums
Hagen Part Number: 19660
Bubble Magus Curve 5 Extreme Protein Skimmer
Overview
The Bubble Magus Extreme Curve 5 Protein Skimmer employs the use of an improved version of the ROCK pump found in the original series. It runs cooler, more efficient, quieter and with a lower wattage compared to the current reliable SP pumps.
The Extreme skimmers use the same body style as found on the BM Elite Skimmers.
These skimmers are designed to be used in sump, have a small footprint, and are made of quality cell cast acrylic.
Features
High quality polished cell cast acrylic body
Long lasting efficient skimmer pump
Needle wheel impeller for optimal micro-bubbles
Innovative features
Stylish space saving design
Efficient venturi
High air suction
Specifications
Footprint: 7.1" x 7.3"
Height: 18.5"
Aquarium Size: Up to 125 gallons
Pump: ROCK SP1.5
Air intake = 330 LPH
Tunze Nano DOC Protein Skimmer - 9004 DC
Overview
DC-controlled version of the popular 9004 with finer tuning and even quieter performance for compact reef systems.
Key Features
Recommended for 60–300 L (15–79 US gal) depending on bioloadElectronic foamer with Turbelle® controller for precise adjustmentSurface film removal and bubble-free outletIncludes international power supply
Specifications
Air capacity: approx. 200 L/hSkimmer cup volume: 0.2 LImmersion depth: approx. 225–245 mm (8.9–9.7 in)Energy consumption: approx. 5 W (max. 10 W) at 12 V DCDimensions (L×W×H): 110 × 90 × 305 mm (4.3 × 3.5 × 12 in)Magnet Holder: up to 12 mm (1/2 in) glass
What's Included
Skimmer body with DC foamerTurbelle Controller (3 m cable)Power supply (100–240 V)Magnet HolderCollection cup
In order to ensure proper operation and efficiency of your Lifegard sterilizer all bulbs and quartz sleeves should be changed on a yearly basis.It is highly recommend when you change your quartz sleeve that you use silicon lubricant to ensure the sleeve is not damaged.The quartz sleeve fits the Lifegard ProMax 55W UV Sterilizer. Manufacturer Part Number: R450203A
Fluval AquaClear AC20/30 Carbon Insert - 3 Pack
Overview
Activated Carbon improves water clarity in fresh and saltwater aquariums. It provides superior adsorption qualities, eliminating odors, discolorations and impurities.
Features
Premium, research-grade chemical filter media
Helps promote healthy, crystal clear water
Highly adsorbent - removes odors, discolorations and toxins
Improves fish health
Will not raise phosphate levels
For best results, replace every 4 weeks
For use in freshwater and saltwater aquariums
Hagen Part Number: 19642
Aqua UV Mounting Bracket
Overview
Heavy-duty mounting bracket engineered to securely support all Aqua UV sterilizer models on aquariums or sumps delivering stable installation and precise alignment.
Features
304 stainless steel construction for corrosion resistance
Precision laser-cut design for exact fit
Adjustable width to fit Advantage and Classic series
Includes stainless mounting hardware
Powder-coated finish for UV protection
Tool-free installation for rapid setup
Fluval FX4 Canister Filter
Overview
Building on the mighty FX performance and reliability platform, the all-new FX4 high performance canister filter is a compact 'little brother' to the FX6. The FX4 bridges the gap between the Fluval 406 and the FX6 canister filter, making it an ideal choice for aquariums up to 250 US Gal (1000 L).
Features
Multi-stage filter pumps out 700 gallons (2650 L) of water per hour
Smart Pump - advanced microchip technology continuously monitors and optimizes pump performance
Self-starting - just add water, plug in and Smart PumpTM will take over. Trapped air auto-evacuated every 12 hours to ensure maximum efficiency
Easy water changes eliminate need to carry heavy buckets. Simply attach hosing to output (Kit sold separately) and Smart PumpTM does the rest
Removable, stackable media baskets eliminate water bypass and hold a total of 1 gallon (3.9 L) of media
All filter media included - mechanical, chemical and biological
Aqua-Stop valves with leak-proof Click-Fit attachment system
Valves positioned at convenient 45-degree angle for easy installation and rotation
Anti-clog, telescopic strainer ensures continuous water flow
Multi-Directional Output nozzles can be fully adjusted to create customized water flows
Utility Valve with drain hose for easy maintenance and flushing of canister
Rubberized feet help ensure quiet operation
Compact 16.5in tall design - easily fits under most aquariums
Made in Italy
For use in freshwater and saltwater aquariums
Specifications
700GPH Flow rate at zero head
All filter media included + and added bonus supply of Biomax and Carbon
16.5" in height
Consumes only 30W operating at 120V.
Filtration Volume: 14 Liters (3.7 Gallons)
Red Sea ReefMat 250 Filter Rolls
Overview
Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 250.
See your ReefBeat app to know when to change your rolls as each system is different.
Specifications
Length: 32m / 105 feetWidth: 8.13cm / 3.2"
Durable, reusable filter media for any filtration method in saltwater or marine aquariums.Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system.Aqua Mesh Grey filter media is designed to be used as the fourth stage (if using all four), and will trap smaller sized particles. Dimensions: 19" x 24" x 1.5"
Fluval AquaClear 110 Power Filter
4 Stage Filtration with your AquaClear Filter
Overview
A newly calibrated water path cycles through 4 complete filtration stages to optimize cleaning performance. All media included.
AquaClear CycleGuard Maintains your Aquariums Balance
CycleGuard maintains your aquariums biological balance and prevents nitrogen cycle disruptions. By allowing 1 of the 3 media inserts to be changed at a time, bacteria levels remain stable, supporting continuous and effective biological filtration without harmful fluctuations.
Each AquaClear Power Filter has a Patented Re-filtration System
This unique feature permits flow rate adjustment without compromising filtration efficiency. When flow is reduced, the system will process up to 50% of the water several times within the chamber, ensuring a cleaner and healthier aquarium with exceptionally clear water.
Features
Quieter Operation with a Precision Motor Design -A re-engineered rotor configuration enables smoother rotations, reduced vibrations and quieter operation (AC20, AC30, AC50 and AC70 models only)
Filter to Tank Stepped Interface Offers a Smarter Design - In most cases the filters are self-leveling for convenient installation and the stepped interface helps to prevent water spills. (AC20, AC30, AC50 and AC70 models only)
Quieter Operation - A new sound-dampening cover minimizes the echo chamber effect making the filter noticeably more quiet than previous generations.
Wide Media Selection - Discover Fluval's complete range of authentic media solutions, offering higher quality, consistency and effectiveness to help support the overall health of your filter and fish.
Up to a 5 Year Warranty - In addition to a standard 3 year warranty, Fluval AC Series owners are offered an additional 2 years of coverage (at no charge) upon successfully registering their purchase.
SpecificationsAquarium Capacity:60-110 Gallons (227-416 liters) Max Flow Rate: 500 GPH / 1892 LPHPower Consumption: 14 watts at 120V/60HzDimensions: 13.6" x 6.9" x 9.2" (L x W x H) Included Filter Media 1 Bio-Foam2 Carbon2 BioMax1 Intake Sponge
Aquatop SPNano-UV Submersible Aquarium Filter
Overview
The SPNANO-UV submersible UV sterilizing filter is perfect to help you eliminate unsightly algae and control unwanted algae blooms. The UV bulb aids in the health of aquatic life by eradicating free floating microorganisms and disease causing pathogens in both salt and freshwater aquariums. The SPNANO-UV Filter uses a submersible top-mounted pump to draw water past its compact UV bulb. The UV bulb is encapsulated in a unique quartz tube and includes a sponge pre-filter to mechanically filter organic waste before water passes over the UV bulb. The versatile design of the SPNANO-UV Series Filter allows for UV Sterilization to be submersed in both fresh and saltwater nano aquariums. With its compact size, the SPNANO-UV can be easily mounted vertically or horizontally in smaller aquariums or sump tanks. The design allows for easy installation and maintenance.
Features
5W UV Sterilizer
Built-in 5.5W Water Pump
Can be placed in Tanks or Sumps
Capable of Filtering 10-30 Gallon Aquariums
Eradicate and Control Free-floating Micro-organisms and Pathogens
Specifications
Dimensions: 2.25"(L) x 1.5"(D) x 7.25"(H)
Flow Rate: 66 gals/Hr
Suitable for Tanks up to 30 gallons
Can be mounted Vertically or Horizontal
UV Sterilizer: 5W
Volt/Freq: 110V/60Hz
Suitable for Fresh and Salt Water Aquariums
Hagen Aquaclear 70/300 Ammo Rid Replacement AquaClear 70 Ammonia Remover is ideal for new or heavily populated freshwater aquariums. It removes and controls harmful ammonia and nitrite, creating a healthy aquatic environment. Controlling ammonia levels is critical for reducing stress on fish. Exclusively designed for use in the AquaClear 70 Power Filter. Features of Hagen Aquaclear 70/300 Ammo Rid Replacement Removes harmful ammonia Helps keep ammonia levels within tolerable limits Provides numerous bacterial attachment points Recommended for FRESH WATER USE only Hagen Part Number: A616
Fluval 107 Canister Filter
Overview
The Fluval 07 series marks the 7th incarnation in 4 decades of Fluval's top selling canister filter family. Not only does the latest generation incorporate the power and reliability you've come to expect from the leader in aquatic filtration, but it also features several new performance upgrades that make it up to 25% quieter and more robust, energy-efficient, Flexible and easier to use than ever before.
Features
Fluval eTEC (Efficient Technology) construction employs cutting-edge design, materials & manufacturing methods to deliver powerful pump performance, reduced energy consumption & ultra-quiet operation
Powerful motor generates constant pumping power and pressure that endures over time
Re-engineered, precision-crafted pump runs up to 25% quieter than previous generation
Energy-efficient - some 07 series filters draw as little energy as a single household LED light bulb
Redesigned, substantially enlarged rubber feet stabilizers offer superior vibration-dampening ability and added protection
New ergonomic AquaStop valves with raised lip for smoother operation
Single action dual Lift-Lock motorhead clamps for quick release and attachment
Redesigned Primer with larger easy-grip handle provides fast, effortless start-ups with just a few pumps
EZ-Lift media baskets with new center handle allow media stack to be removed with just 1 finger for quick access (less mess & no need to empty canister of water)
Unique vertical pre-filter cartridge with independent access provides more surface area and better mechanical filtration
All necessary authentic Fluval media included
Designed and manufactured in Europe
Specifications
Aquarium Size: 10-30 US Gal (40-130 L) Pump Performance: 145 US Gal/h (550 L/h) Vertical Pre-Filter: 514cm2Basket Volume: 1.2LTotal Chamber Volume: 2.0LCanister Volume: 3.9LFilter Dimensions: 7.5" x 7" x 13.7" (19 x 18 x 35cm) Filter Circulation: 121 US Gal/h (460 L/h) Max Water Column Height: 1.45mWattage - 120V/60HZ: 10WWattage - 230-240V/50HZ: 10WWhat's Included
Fluval Bio-Foam Max
Fluval Bio-Foam
Fluval Carbon 70 g
Fluval Quick-Clear
Fluval Bio-Foam+
Fluval AquaStop valve
Ribbed hosing
Rim connectors
Intake tube
Intake strainer
Intake Stem with intake strainer
Pre-Filter basket
Media basket
Media basket cover
Media basket handle
Suction cup (30 mm)
Output nozzle
Rubber hose connectors
Instruction manual
Fluval AquaClear Intake Strainer Sponge - AC20/30/50
Overview
The Intake Strainer Sponge acts as a pre-filter media, keeping algae filaments and debris away from the pump while helping to maintain consistent water flow.
Features
Mechanical filter media
Designed for use with Fluval AC20/AC30/AC50 Power Filters
Mechanical filter media easily installed over the filter intake
Helps keep debris away from pump to maintain proper water flow
Prevents small or baby fish from getting trapped in the filter
For use in freshwater or saltwater aquariums
Hagen Part Number: 19684
Bubble Magus Curve 3 Extreme Protein Skimmer
Overview
The Bubble Magus Extreme Curve 3 Protein Skimmer employs the use of an improved version of the ROCK pump found in the original series. It runs cooler, more efficient, quieter and with a lower wattage compared to the current reliable SP pumps.
The Extreme skimmers use the same body style as found on the BM Elite Skimmers.
These skimmers are designed to be used in sump, have a small footprint, and are made of quality cell cast acrylic.
Features
High quality polished cell cast acrylic body
Long lasting efficient skimmer pump
Needle wheel impeller for optimal micro-bubbles
Innovative features
Stylish space saving design
Efficient venturi
High air suction
Specifications
Footprint: 5.9" x 6.7"
Height: 16.5"
Aquarium Size: Up to 75 gallons
Pump: ROCK SP1.0
Air intake = 270 LPH
Hagen Fluval 207 Canister Filter **Value Pack**
Overview
Includes additional media at great savings!*
The Fluval 07 series marks the 7th incarnation in 4 decades of Fluval's top selling canister filter family. Not only does the latest generation incorporate the power and reliability you've come to expect from the leader in aquatic filtration, but it also features several new performance upgrades that make it up to 25% quieter and more robust, energy-efficient, Flexible and easier to use than ever before.
Features
Fluval eTEC (Efficient Technology) construction employs cutting-edge design, materials & manufacturing methods to deliver powerful pump performance, reduced energy consumption & ultra-quiet operation
Powerful motor generates constant pumping power and pressure that endures over time
Re-engineered, precision-crafted pump runs up to 25% quieter than previous generation
Energy-efficient - some 07 series filters draw as little energy as a single household LED light bulb
Redesigned, substantially enlarged rubber feet stabilizers offer superior vibration-dampening ability and added protection
New ergonomic AquaStop valves with raised lip for smoother operation
Single action dual Lift-Lock motorhead clamps for quick release and attachment
Redesigned Primer with larger easy-grip handle provides fast, effortless start-ups with just a few pumps
EZ-Lift media baskets with new center handle allow media stack to be removed with just 1 finger for quick access (less mess & no need to empty canister of water)
Unique vertical pre-filter cartridge with independent access provides more surface area and better mechanical filtration
All necessary authentic Fluval media included
Designed and manufactured in Europe
Specifications
Aquarium Size: 20-45 US Gal (60-220 L) Pump Performance: 206 US Gal/h (780 L/h) Vertical Pre-Filter: 803cm2Basket Volume: 1.8LTotal Chamber Volume: 3.1LCanister Volume: 5.3LFilter Dimensions: 7.5" x 7" x 16.5" (19 x 18 x 42cm) Filter Circulation: 121 US Gal/h (460 L/h) Max Water Column Height: 1.45mWattage - 120V/60HZ: 10WWattage - 230-240V/50HZ: 10WWhat's Included
Fluval Bio-Foam Max
Fluval Bio-Foam
Fluval Carbon 70 g
Fluval Quick-Clear
Fluval Bio-Foam+
Fluval AquaStop valve
Ribbed hosing
Rim connectors
Intake tube
Intake strainer
Intake Stem with intake strainer
Pre-Filter basket
Media basket
Media basket cover
Media basket handle
Suction cup (30 mm)
Output nozzle
Rubber hose connectors
Instruction manual
*When purchasing from J&L Aquatics you will receive 2x3-100g Carbon, 500g BioMax, 2x207/307 Pads, and 1 Clearmax 3-100g- an approximate MSRP value of $81.90!
Bubble Magus SP4000 Replacement Impeller
Overview
Replacement Needle Wheel Impeller for the Bubble Magus Curve 9 Protein Skimmer.
Needle Wheel Impeller for the SP4000 Pump.
Bubble Magus Auto Roll Filter G2
Overview
No more filter socks!
The 2nd Generation Bubble Magus Auto Roll Filter (ARF) removes the need for filter socks. Water is fed into the internal chamber via the aquarium systems drain, and through the filter roll.
When the water level rises in the chamber due to the filter media clogging, the increased water level triggers the float switch which causes the motor to wind the filter roll to a place where a new fresh piece of filter media is in the path of the water. The water level will then drop repeating the process.
Features
FeaturesManual buttonError LED lightMoisture resistance
Imperial pipe connections
Molded brackets
Specifications
12v DC motor
110v Power adapter ULc DC12v 1amp output
Water level switch
Filter roll Non woven 150mm width, 25M length
1" I.D inlet pipe, complete with Flex pipe
40 x 36 x 26cm total dimensions (including motor body)
15.75" x 14.17" x 10.23" total dimensions (including motor body)
Internal sump mounted
