Lighting

Ecotech Radion XR15 Light Shade - 5"/45 degree Tired of your lights illuminating the room and not your tank? This may be the solution for you! 3 Sided Light Spill Shade for Ecotech XR15 LED The 3 sided light shade is designed to easily attach to your Radion LED and is ideal for standard aquariums that have the lights oriented in "landscape mode" up against a wall.You can choose between a wide angle (45 degree) or narrow angle (60 degree) shade depending on your set-up. Each light shade is available in two different heights which as well that gives you the option for a larger shade height for lights that are higher above the aquarium water. XR15 45 degree 5 Inch Light Shade Features 3 sided light is ideal for "traditional set-ups". For peninsula or lights oriented 90 degrees, we would recommend the 4 sided shade (special order at this time). 45 degree shade is designed for shallower/narrower aquariums or where the lights are spaced farther apart. Made out of high temperature PLA - won't warp or bend. Slip on over existing light with cutouts for ventilation and power cord make installation easy. No significant PAR loss - possibility of a DIY set-up of reflective material on the inside of the shade. Decrease of blue light exposure in area of aquarium. Works with G5 or G6 Radion LED fixtures Dimensions: 13.7" x 10.3" x 5"

Read more less

Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")

Read more less

Aqua Illumination Coral Grow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Grow Blade LED The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500nm) to address the photosynthetic needs of corals.Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed.Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Grow includes the following 24 diodes per cluster group 12x Royal Blue 6x Cool White 6x Blue AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced blue and white spectrum optimized for coral photosynthesis Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Grow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")

Read more less

Ecotech Radion XR15 Blue G6 Upgrade Kit Upgrade Kit to turn your existing G5 XR15 Blue (or Pro) into a XR15 G6 Blue led light.Radion G6 models are built on the same heat sink and driver platform as the equivalent Radion G5 models (XR15 or XR30). Excitingly this allows for a same model (XR15 and XR30) upgrade path for G5 to G6. Included in the upgrade kit is the G6 cluster and HEI lens - which together combine to create the Hybrid Hemispherically Edge Illuminating (HEI2) lens system. See documents tab for installation instructions.

Read more less

Reef Brite® is excited to announce the new XHO-K30 LED ADD-ON KIT for Ecotech Radion® XR30 and AI Hydra® 52 and 64 fixtures with RMS and HMS™ mounts and hanging kits.With a combined total of 32-3-Watt LED’s in the Blue and Violet region, the Reef Brite XHO-K30 add on kit will increase intensity, PAR, color and pop while improving coverage and illuminating dead spots and shadow areas in your tank. Each kit includes two Reef Brite 15-inch Blue Actinic XHO’s, Reef Brite XHO-B30 brackets, 2-way connector, and power supply. The included XHO’s are dimmable and can be controlled with APEX® controllers (Reef Brite APEX LED interface required sold separately). They can also be controlled using the new Reef Brite Wireless Bluetooth LE controller (Sold separately) which works with Apple® and Android™ devices. Already own a pair of Reef Brite XHO’s? The Reef Brite XHO-B30 brackets are also available separately allowing you to mount two XHO® units to your existing lighting set up. Important please read all instructions carefully before installing your XHO-K30 LED ADD-ON KIT: The complete ADD-ON KITS weight approximately 2 lbs. Reef Brite has gone through great care to ensure that the XHO-K30 LED ADD-ON KIT installs seamlessly to your fixture. Due to various tank sizes/glass thicknesses and older style mounts offered, before installing it is very important that you check your tank manufacturers specs as well as checking the mount you are using to ensure that it is compatible and can support the additional weight. Reef Brite will not be responsible for improperly installed kits or any damages that may result. If you have any questions before or during the installation of your kit, please contact joy@reefbrite.com and one of our customer service representatives will be glad to assist you. For faster service please provide your phone number and a good time to call. Thank you Installation instructions for RMS and HMS™ mounts: When working near or around your aquarium make sure all working surfaces are completely dry before handling any electrical equipment. Make sure your fixture is unplugged from electrical outlet and disconnected from the power supply before attempting to install the XHO-K30 LED ADD-ON KIT. If fixture was in use even for just a short period let cool. LED’s can get very hot during operation and can cause personal injury or damage surfaces if proper care in handling is not taken. Once cool, place fixture on a secure table or work surface. XR series locate the four M5 x 12mm mounting screws included with your XHO-K30 LED ADD-ON KIT. Hydra HD series locate the two M5 x 25mm screws that came with your XHO-K30 LED ADD-ON KIT. These screws are required to install the XHO-K30 LED ADD-ON KIT. Do not attempt to use hardware not supplied with your XHO-K30 LED ADD-ON KIT as damage to your fixture could result. Attach the two brackets that came with your XHO-K30 LED ADD-ON KIT by placing them under the RMS or HMS™ mount you are using for your XR or Hydra HD series light so that the holes align with the threaded holes on your fixture. Using the provided hardware attach the brackets and mount to the fixture. It is recommended to use care when threading the screws and avoid over tightening the screws once installed. Install the two XHO’s included with the XHO-K30 LED ADD-ON KIT with the screws provided on the ends of the XHO’s. Using the supplied 2-way connector plug in each of the two XHO’s. Attach the supplied power supply in your XHO-K30 LED ADD-ON KIT to 2-way connector. When plugging in the 2-way connector to the XHO’s or power supply to the 2-way connector, make sure to insert plugs until you feel them lock in place. Make sure to locate the power supply in a safe location away from any contact with water. Carefully attach your fixture to the aquarium mount, plug in fixture and power supply to a GFI outlet (Recommended) assuring a proper drip loop is employed. Important note: Use of power strips located on floors or any location where water can come in direct contact with them is dangerous and can cause serious injury or fire. Make sure all electrical plugs and electrical outlets are safely located so that water cannot splash or spill on them. Installation instructions for hanging kits: When working around water make sure all working surfaces are completely dry before handling any electrical equipment. Make sure your fixture is unplugged from electrical outlet and disconnected from the power supply before attempting to install the XHO-K30 LED ADD-ON KIT. If fixture was in use even for just a short period let cool. LED’s can get very hot during operation and can cause personal injury or damage surfaces if proper care in handling is not taken. Attach the two brackets that came with your XHO-K30 LED ADD-ON KIT by placing them over the top of the fixture, so that the holes in the XHO-K30 brackets align with the threaded holes on your fixture. HD series the posts that comes with your hanging kit go through the center hole on the bracket to attach brackets to your fixture. The XHO-K30 LED ADD-ON KIT was designed so that the posts for the hanging kit keep the kit secured in place. Using the supplied hardware that came with your hanging kit attach the hanging kit and brackets to your fixture. Do not attempt to use hardware not supplied with your hanging kit or XHO-K30 kit as damage to your fixture could result. Install the two XHO’s included with the kit with the screws provided on the ends of the XHO’s. Using the supplied 2-way connector plug in each of the two XHO’s. Attach the supplied power supply in your XHO-K30 LED ADD-ON KIT to 2-way connector. When plugging in the 2-way connector to the XHO’s or power supply to the 2-Way connector, make sure to insert plugs until you feel them lock in place. Make sure to locate the power supply in a safe location away from any contact with water. Carefully attach your fixture to the hanging cables, plug in fixture and power supply to a GFI outlet (Recommended) assuring a proper drip loop is employed. Important note: Use of power strips located on floors or any location where water can come in direct contact with them is dangerous and can cause serious injury or fire. Make sure all electrical plugs and electrical outlets are safely located so that water cannot splash or spill on them. IMPORTANT NOTICE: When installing any lighting product, power supply, or controller do not install in a manner that will allow any part or component to come in direct contact with water. Reef Brite assumes no liability for incorrectly installed products.

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Actinic Blue promotes growth and is perfect for bring out vibrant fluorescence making your corals pop with color. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Actinic Blue promotes growth and is perfect for bring out vibrant fluorescence making your corals pop with color. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Plantlyte series is perfect for planted tanks providing the necessary spectrum for plant health and growth while rendering their natural colors. Another feature of the Plantlyte Duo is that it enables users to change the physical color temperature by adjusting the individual channels with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-ine Dimmers Y Connector

Read more less

APEX Certified versatile dimming control for one Lumi Lite, Tech and XHO lighting units.Works with any APEX controller or can be controlled by 0-10 volt based controllers. Easy to install and set up. Simply plug the interface inline between any Reef Brite LED unit and power supply, then plug the RJ45 cable into any available VR port on your APEX system.A VDM module is not required so long as you have a VR port available on the main APEX unit.Recommended maximum load for single or dual channel models is 120 watts per channel.

Read more less

The Red Sea ReefLED 90 Pendants allow multiple ReefLED 90 Fixtures to be hung, giving an elegant look above your peninsula or classic aquarium.The Pendants are available in black or white, and have 4 model lengths suitable for 30" to 72" long aquariums.ReefLED lights sold separately.

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Blue Actinic series is a multi-spectrum unit ideal for aquarist looking for amazing colors and growth, fluorescence, or pop in their corals and other photosynthetic invertebrates. Includes: Light fixture Power Supply Mounting Legs

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish and uses a proprietary blend of LEDs in the white and blue region. Includes: Light fixture Power Supply Mounting Legs

Read more less

Hydra Edge HMS Hanging Kit – Secure & Stylish Suspension for Your Hydra Edge Lights Elevate Your Aquarium Lighting with a Sleek, Adjustable Hanging Solution The Hydra Edge HMS Hanging Kit is designed to provide a **sleek, professional mounting solution** for your **Hydra Edge 44HD and 68HD** fixtures. Whether you prefer a **minimalist look** or need a **flexible mounting option** for larger aquariums, this hanging kit offers **stability, adjustability, and seamless integration** with AquaIllumination’s **Hydra Edge lighting system**. With a **sturdy, corrosion-resistant design**, the HMS Hanging Kit ensures your **Hydra Edge lights are securely suspended** above your tank while allowing for **precise height adjustments** to achieve **optimal light spread and intensity**. Perfect for **rimless tanks, open-top aquariums, and large reef displays**, this kit helps you create a **modern, unobtrusive lighting setup**. Key Features & Benefits Designed for Hydra Edge 44HD & 68HD The HMS Hanging Kit is custom-built for use with **Hydra Edge 44HD and 68HD fixtures**, ensuring a **perfect fit and reliable suspension** over your aquarium. Engineered for **strength and durability**, this kit provides a **clean and modern mounting solution**. Fully Adjustable Hanging System Achieve the perfect **lighting angle and intensity** with the **adjustable cable system**, allowing you to customize the **height and positioning** of your **Hydra Edge lights**. Whether you need **higher placement for broad light spread** or **lower positioning for increased intensity**, the HMS Hanging Kit gives you complete control. Strong, Corrosion-Resistant Materials Built with **high-quality stainless steel cables and durable mounting hardware**, the HMS Hanging Kit is **resistant to corrosion and rust**, making it **ideal for saltwater and freshwater aquariums**. The **heavy-duty components** ensure **long-term reliability** and **secure suspension** for your valuable lighting investment. Minimalist Design for an Unobstructed View Say goodbye to bulky mounts and cluttered tank edges. The **HMS Hanging Kit** offers a **sleek, nearly invisible suspension system**, keeping your **aquarium’s visual appeal intact** while ensuring **even light distribution**. Ideal for **rimless tanks and open setups**, this kit helps create a **clean, floating light effect** above your reef. Compatible with a Variety of Aquarium Setups Whether you have a **small reef tank or a large coral display**, the HMS Hanging Kit provides **maximum flexibility** to accommodate **different mounting heights and tank sizes**. This system ensures that your **Hydra Edge lights are optimally positioned** for **enhanced coral growth and coloration**. Technical Specifications Compatibility: Hydra Edge 44HD and Hydra Edge 68HD Adjustability: Fully adjustable hanging height for precise light positioning Material: High-strength stainless steel cables and durable mounting hardware Corrosion Resistance: Designed for both saltwater and freshwater environments Manufacturer: AquaIllumination (AI) UPC: 704335295376 Why Choose the Hydra Edge HMS Hanging Kit? **AquaIllumination is a trusted leader** in high-performance aquarium lighting solutions, offering **expertly designed mounting options** for seamless **Hydra Edge light installation**. The **HMS Hanging Kit** is the **perfect choice for hobbyists and professionals** looking to create **a clean, modern, and fully adjustable lighting setup**. **Custom-built for Hydra Edge 44HD and 68HD** **Fully adjustable hanging system** for customized light positioning **Corrosion-resistant stainless steel cables** for long-term durability **Minimalist design** for a sleek, professional look **Ideal for rimless tanks and open-top aquariums** Order Yours Today! Upgrade your **Hydra Edge 44HD or 68HD mounting solution** with the **Hydra Edge HMS Hanging Kit**. Designed for **maximum flexibility, durability, and aesthetic appeal**, this kit ensures **a secure and professional lighting setup** for any aquarium. Order now and take your aquarium lighting to the next level with a sleek, suspended installation!

Read more less

OPEN BOX/DAMAGED PACKAGING Fluval Sea Marine and Reef 3.0 Led Light - 24-34 Inch FULL SPECTRUM MARINE AND REEF LIGHTING Fluval Marine spectrum LED is designed for hobbyists who want to maintain a thriving saltwater aquarium. Featuring FluvalSmart App technology, the light offers a variety of customizable features controlled on your mobile device. This includes an adaptable color spectrum that supports strong coral growth thanks to the unit's 7 unique LED band waves. Additionally, a programmable 24-hour light cycle produces gradual sunrise, sunset and night settings for a truly natural effect. Precision-engineered in Germany and backed by a generous 3-year warranty, the Fluval Marine LED offers incredible quality and value. Fluval Marine and Reef 3.0 LED Light Features Full Customization with the FluvalSmart AppDownload the FREE FluvalSmart App on your mobile device to control Marine spectrum LED and all its built-in features. No additional equipment required.Programmable 24-Hour Light CycleProgram gradual settings - Sunrise, mid-day, dusk and night.Mimic the natural cycle of the sun and moon to create a realistic environment for your fish.Full Spectrum FlexibilityIndependently control color to suit your lighting needs.Marine spectrum LED features 7 unique band waves for full spectrum results.Pre-Set HabitatsFor convenience, select one of three pre-set light configurations: Sunny Reef, Deep Sea Glo or Color Boost.Improved Performance & ProtectionThe new generation of H.T.E (High Thermal Efficiency) LEDs function at a higher operating temperature, providing improved long-term light output and spectral performance. A re-engineered aluminum shell offers better heat transfer while providing added protection against water and humidity intrusion in conjunction with the light's IP67 waterproof rating.Smart ConstructionA lighter, smoother aluminum frame has reduced overall weight by 50%, leaving a smaller carbon footprint behind.Re-Engineered Touch-SwitchA larger and more responsive surface offers stable control without any fuss.Marine spectrum LED can also be operated manually via the Touch-Switch: ON, OFF, Blue lights & Dimming only.Deeper and Wider CoverageEach individual LED casts 120 degrees of illumination for wide area coverage and uniform lighting WITHOUT dead spots.Unlike other LEDs, The Marine Spectrum LED can be safely mounted directly above the water surface for greater light penetration and efficiency. There is also no need to install a sliding top, which can accumulate stains and reduce light quality. 24-34" Fluval Marine & Reef 3.0 LED Light Specifications Product Number: 14515 Size Range: 24 - 34" (61 - 85cm) LEDs: 168 Par / Lux (Depth) 3" (8cm): 376 / 16290 6" (15cm): 222 / 8750 12" (30cm): 90 / 3620 18" (46cm): 47 / 1940 Wattage: 32 Watts Lumens: 1350 lm Color Temperature: 25000K Lifetime: 50000

Read more less

Hygger Full Spectrum Clip-On LED Aquarium Light - 26 Watt The hygger 018 clip-on light can be used for various planted tanks from approximately 11 to 55 inches long. It's easy to install with the clip-style bracket on a normal rimmed aquarium, and comes in a variety of sizes to meet the different lengths of fish tanks. Besides full spectrum lighting, it also has a Day-Night dual timer that includes Sunrise/Day and Sunset/Moon, adjustable cycles with 9 colors for a planted tanks. Thicker aluminum increases the heat dissipation efficiency. The light also includes a detachable power supply, so there is no need to replace the whole light if it is damaged. Features of The Hygger Full Spectrum Clip-On LED Aquarium Light 4 Modes to Choose From 1. Daylight Lighting Mode: 3-time options 6H/10H/12H, the color simulates sunrise sunset (gradient orange - full-spectrum white light - gradient orange). The Daylight color can not be selected to set. 2. Moonlight Lighting Mode: There are 7 color options in moonlight mode. 3 Time(3H/5H/12H) + 6 brightness(10%-25%-35%-50%-75%-100%) + 7 colors (red, orange, yellow, green, cyan, blue, purple) 4. Manual Mode. Splicing Use - The biggest feature of the hygger clip-on light is that it can be spliced and used for extra-long fish tanks. 14W+42W=be used for tanks up to 60in long; 22W+26W=be used for tanks up to 60in long. The light in the tank's middle can also be adjusted back and forth through the extendable rod. It is easy to maintain. 5 Rows of LEDs - Using high-quality 2835 + 5050 model lamp leds that have a long service life of at least 50,000 hours. The full spectrum lighting is soft, and the color rendering index(CRI) is close to natural light, which protects your eyes and fish. Hygger Full Spectrum Clip-On 26 Watt LED Aquarium Light Specifications Power: AC100-240V / DC20V Power Consumption: 26 Watts Number of LEDs: 180 Light Length: 28.5" (72cm) Suitable Aquarium Length: 31-37" Power Cord Length: 4.9' (to adapater) + 2.3' to wall. Number of Brackets: 2

Read more less

AI Blade Mounting Solution - Large The Blade Hanging Kit from AI is an elegant way to suspend your light above your tank. Made of high-quality brushed aluminum in an attractive black finish and available in 3, 4, and 6 light configurations for all size Blade fixtures. The Large version is designed to allow you to hang 6 lights.Kit includes: 2 bars, appropriate number of Blade mounting clips and V-wires. For use with the HMS hanging kit (sold separately).

Read more less

AI Blade Mounting Solution - Medium The Blade Hanging Kit from AI is an elegant way to suspend your light above your tank. Made of high-quality brushed aluminum in an attractive black finish and available in 3, 4, and 6 light configurations for all size Blade fixtures. The Medium version is designed to allow you to hang 4 lights.Kit includes: 2 bars, appropriate number of Blade mounting clips and V-wires. For use with the HMS hanging kit (sold separately).

Read more less

Ecotech Radion XR30 Light Shade - 4"/60 degree Tired of your lights illuminating the room and not your tank? This may be the solution for you! 3 Sided Light Spill Shade for Ecotech XR30 LED The 3 sided light shade is designed to easily attach to your Radion LED and is ideal for standard aquariums that have the lights oriented in "landscape mode" up against a wall.You can choose between a wide angle (45 degree) or narrow angle (60 degree) shade depending on your set-up. Each light shade is available in two different heights which as well that gives you the option for a larger shade height for lights that are higher above the aquarium water. XR30 60 degree 4 Inch Light Shade Features 3 sided light is ideal for "traditional set-ups". For peninsula or lights oriented 90 degrees, we would recommend the 4 sided shade (special order at this time). 60 degree shade is designed for deeper aquariums or where you want higher intensity. Made out of high temperature PLA - won't warp or bend. Slip on over existing light with cutouts for ventilation and power cord make installation easy. No significant PAR loss - possibility of a DIY set-up of reflective material on the inside of the shade. Decrease of blue light exposure in area of aquarium. Works with G5 or G6 Radion LED fixtures Dimensions: 14.7" x 8.5" x 4"

Read more less

Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")

Read more less

Aqua Illumination Coral Grow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Grow Blade LED The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500nm) to address the photosynthetic needs of corals.Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed.Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Grow includes the following 24 diodes per cluster group 12x Royal Blue 6x Cool White 6x Blue AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced blue and white spectrum optimized for coral photosynthesis Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Grow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")

Read more less

Ecotech Radion XR30 Blue G6 Upgrade Kit Upgrade Kit to turn your existing G5 XR30 Blue (or Pro) into a XR30 G6 Blue led light.Radion G6 models are built on the same heat sink and driver platform as the equivalent Radion G5 models (XR15 or XR30). Excitingly this allows for a same model (XR15 and XR30) upgrade path for G5 to G6. Included in the upgrade kit is the G6 cluster and HEI lens - which together combine to create the Hybrid Hemispherically Edge Illuminating (HEI2) lens system. See documents tab for installation instructions.

Read more less

Neptune SKY Shimz Light Diffuser The Neptune SKY LED was designed with a hybrid diffuser to suit the tastes of most aquarists. The hybrid includes several openings where white LEDs can shine through with no diffusion, bringing back some of the shimmer usually lost with traditional diffusers. These openings are referred to as "Shimz". The SKY comes equipped with Clear Shimz as its default; However, those who wish to reduce shimmer even further can purchase these Diffused Shimz, which can be easily swapped in to replace the Clear Shimz installed on your SKY Light.

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Plantlyte series is perfect for planted tanks providing the necessary spectrum for plant health and growth while rendering their natural colors. Another feature of the Plantlyte Duo is that it enables users to change the physical color temperature by adjusting the individual channels with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-ine Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Plantlyte series is perfect for planted tanks providing the necessary spectrum for plant health and growth while rendering their natural colors. Another feature of the Plantlyte Duo is that it enables users to change the physical color temperature by adjusting the individual channels with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-ine Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector

Read more less

Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Plantlyte series is perfect for planted tanks providing the necessary spectrum for plant health and growth while rendering their natural colors. Another feature of the Plantlyte Duo is that it enables users to change the physical color temperature by adjusting the individual channels with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-ine Dimmers Y Connector

Read more less

Aqua Illumination SOL LED What are some of the features of the SOL LED from AI? The AI Prime Sol LED light fixture is built as a simple no frills coral growing power led.For those who loved the Sol Blue color, the Prime Sol brings back the historic spectrum in a new compact package. All with our modern smart control with the myAI app and a proven track record of success. SOL Optics The AI Prime Sol comes standard with 80 degree lenses giving you the best balance of power and spread. Our lens optics are custom designed, boasting greater than 90% optical efficiency and including a diffuse exit surface to provide improved color blending. LEDs contained in the AI SOL LED The AI Prime Sol utilizes the latest LED technology from leading manufacturers, arranged to provide the best performance:4 - Cool White4 - Blue4 - Royal Blue The SOL's Simple Built-in Control The Prime Sol includes Wi-Fi control standard. Use the myAI app on any iOS or Android device to easily set up or program one or multiple AI Prime's. Don't have a smartphone? Any Wi-Fi enabled MAC or PC will work. A Variety of Options to Mount Your New AI SOL Led Light Tank Mount for AI LED Lights Easily mount your AI Prime on your rimmed or rimless tank with the adjustable Prime Tank Mount. The innovative ball joint makes it simple to tilt and turn your Prime to get the optimal light for your corals. Made of high-quality brushed aluminum it will look great on any setup. Comes in black or silver. Hanging Kit The Prime Hanging Kit from AI is an elegant way to suspend your AI Prime Freshwater above your tank. The unique ball joint makes it a snap to tilt and turn your Prime for optimal light coverage. Made of high-quality brushed aluminum in black or silver. Flex Arm A silicone-coated flex arm makes for an attractive and sturdy solution for mounting your AI Prime Freshwater. Our most flexible mount for a rimmed or rimless tank. Wire-management clips are included. AI SOL LED Specifications Length 4.88in. (12.4cm) Width 4.88in. (12.4cm) Height 1.34in. (3.4cm) Weight 0.95lbs. (0.43kg) Power Consumption 46W at full power Universal Input Range 100 to 240VAC / 50-60Hz Cable Length 20ft. (6.1)

Read more less

The Red Sea ReefLED 90 Pendants allow multiple ReefLED 90 Fixtures to be hung, giving an elegant look above your peninsula or classic aquarium.The Pendants are available in black or white, and have 4 model lengths suitable for 30" to 72" long aquariums.ReefLED lights sold separately.

Read more less

The Red Sea ReefLED 90 Pendants allow multiple ReefLED 90 Fixtures to be hung, giving an elegant look above your peninsula or classic aquarium.The Pendants are available in black or white, and have 4 model lengths suitable for 30" to 72" long aquariums.ReefLED lights sold separately.

Read more less

With clean aesthetic lines and extensive product design, Reef Brite XHO High Power LED bars provide an attractive element to enhance the beauty of any aquatic biotope. Innovation is at the core of what we do at Reef Brite. Creating stunning high quality lighting and aquatic environment solutions, Reef Brite XHO High Power LED bars encompass cutting edge LED replacement technology. Utilizing 3 watt LEDs for maximum performance and output, our XHO LED units are great replacements for T5HO or VHO lighting. These versatile units can also be used to replace any standard strip light or to create a custom lighting system. Because of their unique design and optimized reflector system,Reef Brite LED lights give off very little glare, making them a high definition light source that brings out the vibrant colored details of your aquarium. It gives observers a more enjoyable viewing experience while maintaining shimmer. The ripple or shimmer effect produced by our LED units actually mimics sunlight as it penetrates into the ocean and tropical waters. Made from extruded aluminum, Reef Brite's lightweight low profile design allows XHO LED fixtures to be installed just about anywhere, making them ideal for display tanks, aquarium sumps and refugiums.Experience Xtreme performance at an affordable price. Mix multiple units to create your own Xtreme High Output Led lighting system. Stylish black anodized housing, high performance reflector system, and assembled in the U.S.A. XHO LEDs are the professionals choice.Is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface.

Read more less

With clean aesthetic lines and extensive product design, Reef Brite XHO High Power LED bars provide an attractive element to enhance the beauty of any aquatic biotope. Innovation is at the core of what we do at Reef Brite. Creating stunning high quality lighting and aquatic environment solutions, Reef Brite XHO High Power LED bars encompass cutting edge LED replacement technology. Utilizing 3 watt LEDs for maximum performance and output, our XHO LED units are great replacements for T5HO or VHO lighting. These versatile units can also be used to replace any standard strip light or to create a custom lighting system. Because of their unique design and optimized reflector system,Reef Brite LED lights give off very little glare, making them a high definition light source that brings out the vibrant colored details of your aquarium. It gives observers a more enjoyable viewing experience while maintaining shimmer. The ripple or shimmer effect produced by our LED units actually mimics sunlight as it penetrates into the ocean and tropical waters. Made from extruded aluminum, Reef Brite's lightweight low profile design allows XHO LED fixtures to be installed just about anywhere, making them ideal for display tanks, aquarium sumps and refugiums.Experience Xtreme performance at an affordable price. Mix multiple units to create your own Xtreme High Output Led lighting system. Stylish black anodized housing, high performance reflector system, and assembled in the U.S.A. XHO LEDs are the professionals choice.Is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface.

Read more less

With clean aesthetic lines and extensive product design, Reef Brite XHO High Power LED bars provide an attractive element to enhance the beauty of any aquatic biotope. Innovation is at the core of what we do at Reef Brite. Creating stunning high quality lighting and aquatic environment solutions, Reef Brite XHO High Power LED bars encompass cutting edge LED replacement technology. Utilizing 3 watt LEDs for maximum performance and output, our XHO LED units are great replacements for T5HO or VHO lighting. These versatile units can also be used to replace any standard strip light or to create a custom lighting system. Because of their unique design and optimized reflector system,Reef Brite LED lights give off very little glare, making them a high definition light source that brings out the vibrant colored details of your aquarium. It gives observers a more enjoyable viewing experience while maintaining shimmer. The ripple or shimmer effect produced by our LED units actually mimics sunlight as it penetrates into the ocean and tropical waters. Made from extruded aluminum, Reef Brite's lightweight low profile design allows XHO LED fixtures to be installed just about anywhere, making them ideal for display tanks, aquarium sumps and refugiums.Experience Xtreme performance at an affordable price. Mix multiple units to create your own Xtreme High Output Led lighting system. Stylish black anodized housing, high performance reflector system, and assembled in the U.S.A. XHO LEDs are the professionals choice.Is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface.

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish and uses a proprietary blend of LEDs in the white and blue region. Includes: Light fixture Power Supply Mounting Legs

Read more less

The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Full spectrum white is ideal for marine/reef tanks and when combined with the Actinic Blue units make an affordable lighting solution for any reef aquarium. Includes: Light fixture Power Supply Mounting Legs

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Full spectrum white is ideal for marine/reef tanks and when combined with the Actinic Blue units make an affordable lighting solution for any reef aquarium. Includes: Light fixture Power Supply Mounting Legs

Read more less

Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish and uses a proprietary blend of LEDs in the white and blue region. Includes: Light fixture Power Supply Mounting Legs

Read more less

Aqua Illumination HMS Mounting Rail (24 Inch) The AI HMS rail provides the backbone of the Hydra Mounting System (HMS), which is designed to provide an easy to use, adjustable tank mount solution for the Hydra TwentySix, Hydra FiftyTwo and Hydra HD LEDs.Tailor the HMS to your tank. Width, height, and even the angle of the light is able to be fine-tuned. Slide and swivel your lights to exactly where you want them, then fasten them in place to best illuminate your livestock.The HMS features a slim profile with integrated cord management to minimize visual clutter and complement the clean look of your Hydra fixtures.Mounting Rail overall dimensions: 25.5"Note: Brackets, and either/or a Double Arm Kit or a Hanging Kit is required for complete installation.

Read more less

Hydra Edge 44HD – Advanced Marine Aquarium LED Lighting Revolutionizing Reef Lighting with Cutting-Edge Technology The Hydra Edge 44HD is the latest evolution in aquarium lighting from AquaIllumination (AI), designed to bring a seamless blend of power, efficiency, and customization to your reef tank. Featuring state-of-the-art optics, a revolutionary light engine, and industry-leading control options, the Hydra Edge 44HD is built to optimize coral health, enhance coloration, and provide an immersive aquatic experience. Unlike traditional fixtures, this lighting system integrates both point-source and panel-style illumination, ensuring a balanced, natural light spread with dynamic shimmer effects. Whether you're growing delicate SPS corals or vibrant LPS and soft corals, the Hydra Edge 44HD delivers the perfect spectrum for optimal coral fluorescence and growth. Unparalleled Features & Benefits Hybrid Optical System for Exceptional Light Distribution The Hydra Edge 44HD is built with EdgeField Optics and a dedicated Solar Ring, creating a unique lighting effect that combines the focused intensity of a point source with the uniform coverage of a panel-style fixture. This design eliminates hot spots and shadowing, ensuring consistent, even illumination across your reef. With a 100-degree spread, this light provides exceptional coverage over a 30” x 30” area, making it ideal for various tank sizes while maintaining a smooth transition of colors and intensity throughout the aquarium. Advanced Full-Spectrum LED Performance The Hydra Edge 44HD features: 10 Blue LEDs – Enhancing coral fluorescence and deep ocean aesthetics. 6 Royal Blue LEDs – Designed to replicate natural reef conditions. 8 Violet LEDs – Stimulating coral photosynthesis and coloration. 10 Cool White LEDs – Providing a balanced daylight effect. 2 Warm White LEDs – Adding depth and natural shading. 8 UV LEDs – Boosting coral pigmentation and growth. The combination of these LEDs allows for precise tuning of color and intensity, ensuring optimal coral growth and vibrancy. The Solar Blue Spectrum, designed exclusively for marine applications, enhances the health and beauty of your reef tank. HyperDrive (HD) Technology for Maximum Efficiency HyperDrive (HD) technology automatically reallocates unused power from one LED channel to another. This feature allows you to push certain spectrums beyond standard output limits, creating a highly customizable lighting experience while maximizing power efficiency. Dedicated Moonlight Mode for Natural Nighttime Simulation A dedicated 2300K moonlight channel ensures that your reef’s inhabitants experience a natural lunar cycle, simulating the lighting conditions of a real underwater environment. This helps regulate coral and fish behavior while offering a stunning nighttime viewing experience. Smart Wireless Control with Mobius, myAI, and Fusion (with MXM) The Hydra Edge 44HD is fully compatible with AI’s Mobius control app, allowing for seamless wireless programming and integration with other AI devices. The intuitive interface makes it easy to customize your lighting for any aquarium setup. Versatile Mounting Options for Any Setup The Hydra Edge 44HD is designed to work with a variety of mounting solutions, ensuring easy installation on nearly any tank configuration. The fixture requires a light bracket with the existing HMS system and is compatible with: HMS Single Arm, Multi-Arm, and Hanging Kits Flex Arm Mounts (with appropriate C-Bracket) Hybrid Mounts (for customized configurations) TechnicalSpecifications Dimensions: 11.25” x 6” x 1.06” Wattage: 95W Optic Spread: 100 degrees Coverage Area: Up to 30” x 30” Control Options: Mobius, myAI, Fusion (with MXM) Mounting Requirements: Compatible with HMS, Flex Arm, and Hybrid Mounts (C-Bracket required) Warranty: 1 Year (Parts & Labor, U.S. only) Made in the USA at AquaIllumination’s state-of-the-art facility in Bethlehem, PA Why Choose the Hydra Edge 44HD? AquaIllumination is one of the most trusted names in the aquarium industry, known for developing high-performance lighting solutions with cutting-edge technology and expert-driven design. The Hydra Edge 44HD takes everything reef keepers love about AI lighting and enhances it, delivering a brighter, more efficient, and highly customizable lighting solution for marine aquariums of all sizes. Designed by experts, built for reef enthusiasts Proven track record of coral growth and color enhancement Backed by AI’s industry-leading customer service Superior quality and performance at a competitive price Order Yours Today! Take your reef tank to the next level with the Hydra Edge 44HD – a powerhouse in aquarium lighting that delivers stunning visual appeal and unmatched performance. Order now and bring the ultimate lighting experience to your marine aquarium!

Read more less

Red Sea ReefLED G2 170 – Powerful Reef Lighting for Optimal Coral Growth The Red Sea ReefLED G2 170 is a high-performance LED lighting system engineered to deliver the perfect spectrum for coral health, growth, and stunning coloration. Featuring Reef-Safe LED Technology, this advanced lighting system provides uniform light distribution, eliminating hotspots and ensuring a natural reef-like environment for your aquarium. The high-powered LEDs ensure vibrant coral fluorescence while maintaining the correct PAR levels across your tank. With built-in Wi-Fi connectivity, the ReefLED G2 170 seamlessly integrates with the Red Sea ReefBeat app, allowing full customization of lighting schedules, intensities, and modes. Whether you need a dynamic daylight cycle or a soothing moonlight effect, this system gives you complete control at your fingertips. Key Features 170W Reef-Safe LED – Optimized spectrum for coral health, rapid growth, and enhanced fluorescence Smart App Control – Intuitive customization with the Red Sea ReefBeat app for Android and iOS Multi-Channel Color Mixing – Features 150W of Reef-Spec Blue, 20W of 9,000K White, and a 3W Moonlight LED for natural reef aesthetics Uniform Light Distribution – Specially designed recessed lens prevents hotspots and shadows Advanced Cooling System – Passive cooling design with heat-dissipating fins ensures longevity and consistent performance Flexible Mounting Options – Compatible with Red Sea’s dedicated mounting arms and suspension kits for easy positioning Energy-Efficient Performance – Provides high light output while minimizing power consumption Weatherproof & Durable Build – Designed to withstand humid aquarium environments Specifications Power Output: 170W Light Spectrum: Reef-Spec Blue, White, Moonlight PAR Output: Optimized for coral growth and fluorescence Control: Wi-Fi via ReefBeat app Coverage Area: Up to 30" x 30" (75cm x 75cm) Dimensions: 6.5" x 6.5" x 2.5" (16.5cm x 16.5cm x 6.5cm) Weight: 4.4 lbs (2kg) Mounting Options: Tank-mounted arm or suspension kit (sold separately) Recommended Tank Size: Medium to large reef aquariums The ReefLED G2 170 is the ideal lighting solution for reef keepers looking for a high-powered, intelligent, and energy-efficient LED system that enhances coral health while delivering stunning color vibrancy. Whether you are maintaining a mixed reef or a thriving SPS-dominant tank, this lighting system provides everything needed for optimal growth. Order now and take your reef aquarium to the next level!

Read more less

Red Sea ReefLED G2 115 – High-Performance Reef Lighting for Vibrant Corals Enhance your aquarium with the Red Sea ReefLED G2 115, a powerful and energy-efficient LED light designed to maximize coral growth and bring out stunning colors in your reef. Engineered with Reef-Safe LED Technology, this advanced lighting system delivers a precisely balanced spectrum to prevent hotspots and ensure uniform illumination. With built-in Wi-Fi connectivity, you can seamlessly control and customize your lighting schedule through the Red Sea ReefBeat app. Key Features 115W Reef-Safe LED – Delivers the optimal spectrum for coral health and coloration Smart Light Control – Full customization via the Red Sea ReefBeat app Multi-Channel Color Mixing – Includes 100W of Reef-Spec Blue, 15W of 9,000K White, and a 3W Moonlight LED Even Light Distribution – Recessed lens design ensures uniform illumination without harsh shadows Efficient Cooling System – Passive cooling prevents overheating and extends LED lifespan Versatile Mounting Options – Compatible with Red Sea’s mounting arms and suspension kits for easy installation Specifications Power Output: 115W Light Spectrum: Reef-Spec Blue, White, Moonlight Control: Wi-Fi via ReefBeat app Coverage Area: Up to 24" x 24" (60cm x 60cm) Dimensions: 5.5" x 5.5" x 2.5" (14cm x 14cm x 6.5cm) Weight: 3.3 lbs (1.5kg) Mounting Options: Tank-mounted arm or suspension kit (sold separately) The ReefLED G2 115 is the ultimate choice for reef keepers looking for a powerful, intelligent, and efficient lighting system that enhances coral health and delivers exceptional color vibrancy. Order today and transform your reef aquarium!

Read more less

Red Sea ReefLED G2 60 – Advanced Reef Lighting for Optimal Coral Growth Upgrade your aquarium with the Red Sea ReefLED G2 60, a powerful and energy-efficient LED light designed to enhance coral growth and bring out vibrant colors in your reef. Engineered with Reef-Safe LED Technology, this smart lighting system delivers the perfect spectrum for your tank while preventing hotspots and overexposure. With built-in Wi-Fi connectivity, you can easily control and customize your lighting schedule through the Red Sea ReefBeat app. Key Features 60W Reef-Safe LED – Delivers a carefully balanced spectrum for optimal coral health and coloration Advanced Light Control – Seamless integration with the Red Sea ReefBeat app for full customization Multi-Channel Color Mixing – Includes 50W of Reef-Spec Blue, 10W of 9,000K White, and a 3W Moonlight LED Even Light Distribution – Unique recessed lens ensures uniform lighting without harsh shadows Energy-Efficient & Cool Operation – Passive cooling system prevents overheating and extends LED lifespan Easy Mounting Options – Compatible with Red Sea’s mounting arms and suspension kits for flexible installation Specifications Power Output: 60W Light Spectrum: Reef-Spec Blue, White, Moonlight Control: Wi-Fi via ReefBeat app Coverage Area: Up to 20" x 20" (50cm x 50cm) Dimensions: 4.5" x 4.5" x 2" (11.5cm x 11.5cm x 5cm) Weight: 2.2 lbs (1kg) Mounting Options: Tank-mounted arm or suspension kit (sold separately) The ReefLED G2 60 is the perfect choice for reef enthusiasts looking for a smart, powerful, and reliable lighting system that promotes coral health and brings out the best in your aquarium. Order today and elevate your reef experience!

Read more less

Red Sea ReefLED G2 170 Visor – Enhance Light Focus and Minimize Glare The Red Sea ReefLED G2 170 Visor is an essential accessory designed to optimize your aquarium lighting experience by minimizing excess light spill and glare. Specifically engineered for the ReefLED G2 170, this visor enhances light penetration into your tank, ensuring that the maximum amount of light reaches your corals for improved growth and coloration. Crafted from durable, reef-safe materials, the visor seamlessly integrates with your existing ReefLED G2 170 unit for a sleek and functional upgrade. It also helps reduce room glare, making your aquarium the focal point without unwanted light distraction. Key Features Optimized Light Direction – Focuses light into the aquarium, improving coral exposure and reducing spillover Minimizes Glare – Reduces excess light reflection in the room for a more immersive viewing experience Easy Installation – Designed for quick and secure attachment to the ReefLED G2 170 Durable and Reef-Safe Material – Built to withstand humid environments without degradation Sleek Aesthetic – Enhances the look of your lighting setup while maintaining a professional, modern appearance Perfect Fit – Custom-made specifically for the Red Sea ReefLED G2 170 Specifications Compatibility: Red Sea ReefLED G2 170 Material: High-quality, reef-safe plastic Installation: Quick and tool-free attachment Purpose: Reduces glare and improves light penetration Design: Sleek black finish to match the ReefLED unit The ReefLED G2 170 Visor is the perfect addition to fine-tune your aquarium’s lighting setup. Enhance coral growth, reduce room glare, and create a visually stunning reef display with this easy-to-install upgrade. Order yours today to complete your ReefLED system!

Read more less

Red Sea ReefLED G2 115 Visor – Enhanced Light Control for Your Aquarium The Red Sea ReefLED G2 115 Visor is a must-have accessory designed to optimize your aquarium lighting by reducing glare and light spillage. This custom-fitted visor enhances the efficiency of your ReefLED G2 115 by directing light precisely where it’s needed—onto your corals. Whether you're fine-tuning your reef setup or seeking a more natural look, this visor enhances the overall lighting effect while improving visual comfort for aquarium viewers. Constructed from high-quality, durable materials, the visor seamlessly integrates with your existing ReefLED G2 115, maintaining a sleek and professional aesthetic while improving light efficiency. It is easy to install, requiring no tools or modifications, making it a simple yet effective upgrade for any reef enthusiast. Key Features Precision Light Control – Reduces light spillage and directs illumination onto corals Enhanced Viewing Experience – Minimizes glare for a more natural and immersive aquarium display Easy Installation – Attaches effortlessly to the ReefLED G2 115 with a secure fit High-Quality Materials – Durable, lightweight, and designed to withstand humid aquarium environments Sleek Aesthetic – Matches the design of the ReefLED G2 115 for a seamless integration Optimized Light Efficiency – Improves the focus of LED output for better coral growth and coloration Specifications Compatibility: Red Sea ReefLED G2 115 Material: High-durability, heat-resistant plastic Installation: Tool-free, snap-on design Weight: Lightweight for minimal impact on mounting Color: Black to match ReefLED aesthetics The ReefLED G2 115 Visor is the perfect accessory for reef keepers looking to enhance their lighting system by focusing illumination where it matters most. Improve your coral display, reduce unwanted glare, and create a stunning viewing experience with this simple yet effective upgrade. Order now and take your aquarium lighting to the next level!

Read more less

Red Sea ReefLED G2 60 Visor – Reduce Glare and Enhance Light FocusTheRed Sea ReefLED G2 60 Visoris designed to enhance your aquarium lighting experience by minimizing glare and improving light focus within your tank. This easy-to-install accessory is an ideal addition for hobbyists looking to direct light effectively while reducing unwanted light spillage outside the aquarium.Made from high-quality, durable materials, the visor attaches securely to theReefLED G2 60, ensuring optimal performance without affecting cooling or ventilation. By concentrating light where it’s needed most, the visor helps maximize coral growth and enhances the visual appeal of your reef.Key FeaturesReduces Light Spillage– Directs light into the aquarium, preventing unnecessary glareEnhances Light Focus– Maximizes light penetration for optimal coral growthCustom Fit for ReefLED G2 60– Seamlessly integrates with your existing light unitEasy Installation– Secure snap-on design with no tools requiredDurable and Heat-Resistant– Made from high-quality materials that do not interfere with coolingSleek and Low-Profile Design– Complements your aquarium setup without obstructing aestheticsSpecificationsCompatible With:Red Sea ReefLED G2 60Material:High-quality, heat-resistant plasticInstallation:Snap-on, tool-free attachmentWeight:Lightweight design for easy handlingColor:Black to match the ReefLED unitTheReefLED G2 60 Visoris an essential upgrade for reef keepers who want to fine-tune their lighting setup, reduce glare, and enhance the overall tank aesthetics. Improve light efficiency and coral health with this simple yet effective accessory. Order yours today!

Read more less