The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
Aqua Illumination Blade Coral Grow LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Ecotech Radion XR15W Blue G6 LED Light
Overview
For those who love Blue - we present G6 Blue!
Bluer in every way and then some. Adjustments to the diode mix offer new depths of color intensity. With so much Blue, G6 now creates the opportunity to tune the Blue look between actinic and crisp. The addition of 395nm to the LED cluster pushes fluorescence in fish and corals to the next level
EcoTech is proud to introduce the Radion G6. The G6 furthers the success of the current Radion platform with impressive improvements in light output and color. The newest Radion features a new LED cluster and Hybrid Hemispherically Edge Illuminating optical system that takes the capabilities of the Radion from best-inclass to mind-blowing.
G6 Radion Offers Wide Color
Blue or Pro, EcoTech aims to bring you the absolute best of what's technologically possible. In the aquarium, enjoy richer colors, pop more fluorescence and create the ultimate balance between crisp and actinic. From its inception, Radion has set the standard for what full spectrum aquarium LED lighting can be. The 6th generation pushes the limits of color rendition and fluorescence without sacrificing any of the famous flexibility that caters to the desire of the user. With the addition of 395nm diodes, G6 pushes deeper into the UV range, achieving a new level of coral and fish fluorescence. Both Blue and Pro models also feature a re-balancing of color channels and LED (Diode) mix to augment the most flexible and balanced spectra available in aquarium lighting.
New Radion G6 has it all!
But how does it make your tank lookBetter than ever! The G6 Hybrid Hemispherically Edge Illuminating (HEI2) optic system combined with LED placement and form factor delivers beautiful shimmer, super color mixing, ridiculously even PAR, mind-blowing spread and even the ability to adjust the type of blue hue that you love the most. What's your preference, Professional Balance or Extreme Blue?
Mind-blowing Spread
Ultimate Fluorescence
Intense Full Spectrum Color
Fully programmable
Wireless Control
Moonlight
Weather Simulation
Technologically Superior Design
Premium Quality Components
Unmatched Support and Service
Extensive Mounting Options
Optional Diffuser Accessory
Mind-Blowing Spread! Radion G6 has spread so wide it has to be seen to be believed thanks to HEI2 Optical System
Radion G6 increases output from an impressive 110.5 degrees in the G5 to a staggering 126.3 degrees. This improvement was achievable through a change to the primary optic on the LEDs which then integrates with the geometry in the existing HEI (Hemispherically Edge Illuminating) secondary optic (lens) Radion is a winner in the cost vs. output equation. Wide even spread requires less fixtures to cover more tank. The result, incredibly even PAR over almost 4ft of coverage area, making it the highest average output Radion and perhaps the most efficient aquarium light ever madeAn added benefit of super wide spread is that the aquarium assists the optics. The output angle of the G6 results in the interior glass of the aquarium reflecting light back into the tank. This reduces shadowing and provides light to the undersides of coral.Other things to be aware when looking at G6 Radion Light
The spectrum of the G6 Pro can be matched to G5 Pro spectrum although the clusters are different - the core spectrum is the same and the flexibility of the G6 will match the equivalent G5. Peak PAR is higher on the G5 but the G6 produces more light (spread) in total.
All current RMS parts and components that are compatible with the G5 are also compatible with the G6.
G5 units are fully upgradeable to the same sized G6 units.The upgrade kit consists of a cluster, lens and necessary tools to perform the upgrade. You are able to change from a G5 Blue to a G6 Pro and vice versa as long as it's the same model size (XR15 or XR30) you can change your model version through the upgrade process. The new clusters have an additional 2-year warranty beyond the existing Radion warranty. All other product warranties remain unchanged by performing an upgrade.
Check out our downloads tab for more information on these lights. *Offer only valid with the purchase of matching LED and limited to 1 Arm per LED (maximum 2 arms per order)
Red Sea ReefLED 90 Arms are universal mounts that securely attach onto the rear wall of the aquarium and can be rotated (side to side), allowing greater access to the aquarium for reefscaping or tank maintenance.The RL90 is suited for aquariums with widths from 18.25 to 27.5" and a glass thickness up to 3/4".
The A360 Narrow Reflector strengthens the light beam of the best-in-class A360 for further penetration and contrast.With an easy to attach magnetic design, the reflector increases the center light intensity by up to 3x while adding a dynamic depth to your tank. This accessory is perfect for deep tanks or SPS corals with strict light requirements. 3X Center Light IntensityDesigned for SPS-dominated tanks and/or aquariums up to 5 feet deep, the Narrow Reflector focuses the light of the A360 to provide an abundance of light energy.Strengthens Contrast, Depth, and DynamicsUnlike a T5-only tank with flat lighting, Kessil fixtures specialize in dynamics in aquariums. This feature is most evident in the depth and contrast created by the Narrow Reflector. For users with multiple A360s, this accessory can differentiate one light from another, making aquariums dynamic and compelling.Easy To Attach StyleMagnetic mounts allow the user to quickly and easily attach the Narrow Reflector to the A360 � no tools or disassembling needed.Suitable for the A360X Tuna Blue and A360X Tuna Sun
Red Sea ReefLED 50 Arms are universal mounts that securely attach onto the rear wall of the aquarium and can be rotated (side to side), allowing greater access to the aquarium for reefscaping or tank maintenance.The RL50 is suited for aquariums with widths from 14 to 20" and a glass thickness of 5/16 to 3/8".
The new Kessil A80 LED fixture is an ultra-compact, completely silent, LED fixture that is great for Nano Reef Aquariums and Fish-Only Aquariums.Design Innovative heat dissipation allows for fanless, low maintenance, shell-shaped design.Advanced optics create smooth color mixing and a beautiful shimmer.EfficiencyUtilizing Kessil's carefully designed optics and the Dense Matrix array, the A80 provides the most light per watt of any fixture built so far. Dense Matrix LED ArrayKessil's unique, efficient Dense Matrix LED array is built in-house and packs high-power and deep penetration lighting solutions onto a single small chip. Advanced ControllabilityUse the dials on the fixture to quickly set the spectrum and intensity for a personalized look or use your favorite 0-10V controller. Kessil Logic maintains consistent output no matter the spectrum. Daisy-chain multiple lights (with Link Cable, sold separately) for seamless control from a single source. Or, use the Kessil Spectral Controller (sold separately) for advanced programming and automated control. SpectrumsThe result of years of research and testing, our aquarist-specific spectrums ensure vibrant coloration and prolific growth. Specifications Dimensions: 4.88" x 0.98" (Diameter x Height) Coverage: Up to 24" x 24" for fish-only aquariums and 14" x 14" for refugiums and planted aquariums Power Supply: 100-240V AC (input) 24V DC (output) Power Consumption: 15W
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase a track for your aquarium and an RMS Slide to match each Radion (either XR15, or XR30 Slide) you want to mount.
Aqua Illumination Prime Fuge 16 LED
Overview
The AI Prime Fuge 16 LED light fixture uses a mix of Photo Red, Red, Cool White, and UV LEDs specifically tailored to provide the perfect spectrum for growing macro-algae in your refugium. It is optimized to put all of its power towards growing algae, and grow it fast. Macro-algae photosynthesis is fueled by elements in the water such as nitrates and phosphates. The more photosynthesis, the more growth, the more nutrients are consumed, leaving your water clearer and fresher.
Prime Fuge Optics
The AI Prime Fuge comes standard with 80° lenses giving you the best balance of power and spread. Our lens optics are custom designed, boasting greater than 90% optical efficiency and including a diffuse exit surface for superior color blending.
LEDs in AI Prime Fuge 16 LED
6 - Photo Red
4 - Red
2 - Cool White
2 - Violet
Built-in Control
Includes Wi-Fi control standard. Use the myAI app on any iOS or Android device, or any Wi-Fi-enabled Mac/PC.
Mounting Options
Supports Tank Mount, Hanging Kit, and Flex Arm (with wire-management clips).
Specifications
Length 4.88" (12.4 cm)
Width 4.88" (12.4 cm)
Height 1.34" (3.4 cm)
Weight 0.95 lbs (0.43 kg)
Power Consumption 59 W at full power
Universal Input Range 100-240 VAC / 50-60 Hz
Cable Length 20 ft (6.1 m)
Mount the AI Prime Fuge LED Light to your aquarium using the sleek tank mount, flexible arm, or suspend it over your aquarium using the AI Hanging Kit - all sold separately.
Aqua Illumination Prime 16HD Freshwater LED - White
Features
Overview
No longer are you limited to using a fixed amount of power per channel, the Prime 16HD dynamically adjusts power available to each color, borrowing power from the colors you're not utilizing, giving you the most vivid spectrum your tank has ever seen. The Prime 16HD Series is capable of producing a limitless number of spectral combinations to fit your tank's exacting needs. With built-in Wi-Fi, the AI Prime 16HD is brilliantly simple to use-connect to one and it becomes the parent, controlling all other Prime units automatically; there's no need for an external controller. Covering a 24" × 24" area with a peak PAR of 100 µmol at 24" depth while drawing only 59 W, it comes standard with high-efficiency TIR lenses (>90 % optical efficiency) for optimal spread and color blending, plus a dedicated moonlight channel. Powered by the latest high-output LEDs, it delivers perfect performance for planted tanks.
AI Prime Freshwater LED Layout
6 - Cool White
4 - Warm White
2 - Blue
1 - Photo Red
1 - Green
1 - Moonlight
Specifications
Length 4.88 in. (12.4 cm)
Width 4.88 in. (12.4 cm)
Height 1.34 in. (3.4 cm)
Weight 0.95 lbs. (0.43 kg)
Power Consumption 55 W max
Input 100-240 VAC / 50-60 Hz
Cable Length 20 ft. (6.1 m)
Mount the AI Prime 16HD LED Light using the sleek tank mount, flexible arm, or the AI Hanging Kit - all sold separately.
Aqua Illumination Hydra 64HD LED - Black
AI Hydra 64HD LED Black
Overview
The newest innovation in the AI Hydra line, the Hydra 64HD Series brings more power and color where you want it, while being more compact and offering water resistance-all controllable via the myAI app. No longer are you limited to a fixed amount of power per channel; the HD dynamically adjusts power available to each color, borrowing from unused channels to deliver the most vivid spectrum your tank has ever seen. The Hydra HD Series produces a limitless number of spectral combinations to fit your tank's exacting needs, and with built-in control there's no need for an external controller-use your iOS, Android, or internet-connected device to manage one or multiple units from anywhere in the world.
Hydra 64HD Moonlight
A dedicated moonlight channel delivers realistic, independent lunar illumination without affecting your coral's daytime schedule.
Hydra 64HD Power Output
Building on AI's world-class LEDs, the Hydra 64HD draws up to 135 W from the wall, following the family's hallmark efficiency.
Optics Hydra 64HD
Includes 80° TIR lenses for optimal balance of power and spread; custom-designed for >90 % optical efficiency and enhanced color blending.
Hydra 64HD LEDs per Cluster
4 - Cool White
4 - Blue
4 - Royal Blue
1 - Photo Red
1 - Green
1 - Violet
1 - UV
1 - Moonlight
Specifications
Dimensions: 11.875" × 5.375" × 1.42"
Power Consumption: 135 W
Cable Length: 10 ft
Includes: AI Hydra 64 HD, Power Adapter, Quick Start Guide
Aqua Illumination HMS Hanging Kit
Overview
Suspends HMS LED fixtures on corrosion-resistant stainless steel cables with precision V-wire supports for exact height alignment and sleek overhead mounting in any aquarium setup
Key Features
Adjustable stainless steel cables up to 60 inches
Precision V-wire supports for fixture leveling
Black anodized hardware resists corrosion
Tool-free length adjustments
Supports fixtures up to 15 pounds
What's Included
2x Hanging cables
4x V-wire supports
Mount adapters and hardware
At the junction of performance and aesthetics, Kessil introduces revolutionary lighting that captures the power of the sun. Kessil's award winning lights address all the needs of saltwater tanks while remaining simple and accessible. At the junction of performance and aesthetics, Kessil introduces revolutionary lighting that captures the power of the sun. Kessil's award winning lights address all the needs of saltwater tanks while remaining simple and accessible. Features: Shimmer: Kessil's shimmer gives the look of natural sunlight in your aquatic garden that no other LEDs can reproduce. Tunable Spectrum: Tune the spectrum (6,000-9,000K) and intensity for a personalized look. Kessil Logic maintains consistent output across the tunable spectrum. Spectrum: Kessil manufactures all LED arrays in-house using Dense Matrix technology so each unique spectral blend is custom made to meet aquarist needs. Proprietary "Double Peak" spectrum enhances photosynthetic absorption. Penetration: Patented Dense Matrix LED technology concentrates multiple LED chips into a single light source, creating better and deeper penetration, without sacrificing coverage. New E-Series LEDs are 15% brighter. Design: Different lens options let you decide between maximum penetration or maximum coverage area. Engineered for long life, quiet operation, efficient cooling and maximum performance, all in a compact, low maintenance and attractive design. Controllability: On/off timing, intensity and spectrum are adjustable with a 0~10V external controller. Lights can also be daisy-chained without an external controller so adjustments to one light control all others. Kessil Logic: Kessil Logic enables equal intensity across all spectral points. Kessil Logic ensures consistent illumination throughout the light's adjustable range General Specifications: Fixture Dimensions: 4" x 2.48" (Length x Diameter) Coverage Area: 12 - 24" surface diameter Power Usage: 40W
AI Blade Mounting Clips
Overview
Secure your Blade LED fixtures over 39" with these precision-machined aluminum mounting clips designed for fast, tool-free installation.
Features
Compatible with Blade lights over 39"
Precision-machined aluminum construction
Snap-in design for quick mounting
Black anodized, corrosion-resistant finish
What's Included
2x Blade Mounting Clips
Ecotech Radion XR30W Blue G6 LED Light
Overview
For those who love Blue - we present G6 Blue!
Bluer in every way and then some. Adjustments to the diode mix offer new depths of color intensity. With so much Blue, G6 now creates the opportunity to tune the Blue look between actinic and crisp. The addition of 395nm to the LED cluster pushes fluorescence in fish and corals to the next level
EcoTech is proud to introduce the Radion G6. The G6 furthers the success of the current Radion platform with impressive improvements in light output and color. The newest Radion features a new LED cluster and Hybrid Hemispherically Edge Illuminating optical system that takes the capabilities of the Radion from best-inclass to mind-blowing.
G6 Radion Offers Wide Color
Blue or Pro, EcoTech aims to bring you the absolute best of what's technologically possible. In the aquarium, enjoy richer colors, pop more fluorescence and create the ultimate balance between crisp and actinic. From its inception, Radion has set the standard for what full spectrum aquarium LED lighting can be. The 6th generation pushes the limits of color rendition and fluorescence without sacrificing any of the famous flexibility that caters to the desire of the user. With the addition of 395nm diodes, G6 pushes deeper into the UV range, achieving a new level of coral and fish fluorescence. Both Blue and Pro models also feature a re-balancing of color channels and LED (Diode) mix to augment the most flexible and balanced spectra available in aquarium lighting.
New Radion G6 has it all!
But how does it make your tank lookBetter than ever! The G6 Hybrid Hemispherically Edge Illuminating (HEI2) optic system combined with LED placement and form factor delivers beautiful shimmer, super color mixing, ridiculously even PAR, mind-blowing spread and even the ability to adjust the type of blue hue that you love the most. What's your preference, Professional Balance or Extreme Blue?
Mind-blowing Spread
Ultimate Fluorescence
Intense Full Spectrum Color
Fully programmable
Wireless Control
Moonlight
Weather Simulation
Technologically Superior Design
Premium Quality Components
Unmatched Support and Service
Extensive Mounting Options
Optional Diffuser Accessory
Mind-Blowing Spread! Radion G6 has spread so wide it has to be seen to be believed thanks to HEI2 Optical System
Radion G6 increases output from an impressive 110.5 degrees in the G5 to a staggering 126.3 degrees. This improvement was achievable through a change to the primary optic on the LEDs which then integrates with the geometry in the existing HEI (Hemispherically Edge Illuminating) secondary optic (lens) Radion is a winner in the cost vs. output equation. Wide even spread requires less fixtures to cover more tank. The result, incredibly even PAR over almost 4ft of coverage area, making it the highest average output Radion and perhaps the most efficient aquarium light ever madeAn added benefit of super wide spread is that the aquarium assists the optics. The output angle of the G6 results in the interior glass of the aquarium reflecting light back into the tank. This reduces shadowing and provides light to the undersides of coral.Other things to be aware when looking at G6 Radion Light
The spectrum of the G6 Pro can be matched to G5 Pro spectrum although the clusters are different - the core spectrum is the same and the flexibility of the G6 will match the equivalent G5. Peak PAR is higher on the G5 but the G6 produces more light (spread) in total.
All current RMS parts and components that are compatible with the G5 are also compatible with the G6.
G5 units are fully upgradeable to the same sized G6 units.The upgrade kit consists of a cluster, lens and necessary tools to perform the upgrade. You are able to change from a G5 Blue to a G6 Pro and vice versa as long as it's the same model size (XR15 or XR30) you can change your model version through the upgrade process. The new clusters have an additional 2-year warranty beyond the existing Radion warranty. All other product warranties remain unchanged by performing an upgrade.
Check out our downloads tab for more information on these lights. *Offer only valid with the purchase of matching LED and limited to 1 Arm per LED (maximum 2 arms per order)
ATI Aquablue Special T5 Bulb (80 Watt)
Overview
Since their introduction in 2000, ATI T5 bulbs have been at the forefront of T5 bulb technology. Today's ATI T5 bulbs are no exception.
Continuing the tradition of excellence, ATI uses the latest advances in phosphors (to emit light) and manufacturing techniques to produce bulbs with higher output, better coloration, and more stability. ATI bulbs are also very affordable, making them the preferred choice of experienced hobbyists around the world. T5 bulbs.
Features
The ATI Aquablue Special T5 Bulb combines the properties of a full-spectrum bulb with an elevated blue color peak producing a bulb with an approximate color temperature of 15,000K. Recommended as a stand-alone bulb or in combination with Blue Plus, Purple Plus, True Actinic, or other supplemental
The Kessil A360X has 25% more light output with 30% less in volume size, equivalent to almost 80% higher PVD than the A360.Higher Photon Volume DensityThe A360X has a low profile design with higher light output, thanks to the redesigned, first-class sunflower heat sink.Advanced Color ControlThe A360X has more color control, opening unlimited color combinations for aesthetics while maintaining the performance of the core spectrum.Low Dimming & Improved TransitioningThe A360X features smoother color transitioning and dimming, including moonlight effect.Smarter CommunicationThe new K-Link communication method is an upgrade of the easily plug & play 0-10V, allowing users to network multiple A360X together and set individual groups to run their own programs.Light Shaping CapabilityThe A360X can be used with optical accessories to shape light, allowing users to modify the look of the aquarium to their liking.CoverageThe newly designed optics along with the latest generation Dense Matrix LED array provide a broader delivery of light and eliminate shading.SpectrumThe well-known Tuna Blue spectrum has been proven by its users to promote coral growth and enhance coloration. With Kessil Logic, it ensures consistent power output and coral growth across the tunable spectrum.ShimmerThe Kessil shimmer effect gives your tank a beautiful, natural, sunlit look comparable to the shimmer of a Metal Halide fixture. It is like replicating your own piece of the ocean.PenetrationPatented Dense Matrix LED technology concentrates multiple LED chips into a single array, creating a powerful and penetrating light source with wide coverage. The maximum penetration can reach 24" to 30" beyond the water's surface for most reefs. Penetration can be further enhanced by using the narrow reflector (optional accessory).Color MixingDifferent wavelengths are seamlessly blended within a single LED array, emitting uniform color across the coverage range.Specifications Dimensions: 4.3" x 2.1" / 11cm x 5.3cm Unit Weight: 0.8lb / 0.37kg Spectrum: 6,000K to 9,000K Power Adapter 100-240V AC (input) 19V DC (output) Power Consumption 90W max What's In The Box 1x A360X 1x Power Adapter 1x AC Adapter Cable 1x DC Extension Cable 1x Hanging Ring 2x Metal Screw Hook 2x Hanging Bracket
Aqua Illumination HMS Double Arm Kit
Overview
Dual adjustable arms mount two HMS LED fixtures with tilt and pan control crafted from corrosion-resistant aluminum for versatile positioning and stable performance
Key Features
Supports two HMS LED fixtures
Independent tilt and pan adjustments
Durable corrosion-resistant aluminum arms
Tool-free locking knobs
Universal HMS rail mounting clamp
What's Included
2x HMS Double Arms
1x HMS rail clamp
Hardware pack
Aqua Illumination HMS Hydra 52/64 Bracket
Overview
Mounts 52 and 64 inch Hydra LED strips onto HMS rails with precision-engineered corrosion-resistant aluminum brackets for dependable low-profile support in aquatic environments
Key Features
Fits 52 and 64 inch Hydra LED strips
High-grade aluminum corrosion-resistant finish
Tool-free bracket attachment
Slim profile to maintain aquarium aesthetics
Locking clip for secure fixture hold
What's Included
2x HMS Hydra 52/64 Brackets
Hardware pack
AI Blade Hybrid Mount Kit
Overview
Combine Blade LED strips with Aqua Illumination Hydra or EcoTech Radion pendants on a single mounting system for seamless, parallel lighting.
Features
Universal rail design for Blade and Hydra/Radion fixtures
Customizable spacing and angle
Precision-machined aluminum rails
Black anodized, corrosion-resistant finish
What's Included
2x Hybrid mount rails
4x Blade mounting clips
Mounting hardware
Aqua Illumination Blade Coral Grow LED - 21 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination HMS Mounting Rail (48 Inch)
Overview
48 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
48 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 48 Inch Rail
Mounting hardware
Provides natural day/night cycle for your fish, plants, or live coral. Dual Timer for Aquarium lighting devices. Top outlet controlled by timer, bottom outlet is continuous. Regulate your aquarium's photoperiod with this easy- to-use dual timer!
Fluval Plant 4.0 LED Aquarium Light - 24-35 Inch
Designed Aquatic Plant Growth
Overview
The Fluval Plant 4.0 LED provides powerful and customizable lighting tailored for vibrant freshwater aquascapes. Its optimized spectral output supports lush plant development and enhances the natural appearance of fish and décor.
Smart Control with FluvalConnect
Use the FluvalConnect app via Bluetooth Mesh to fine-tune your lighting. Adjust spectral color, brightness, and simulate sunrise to night cycles with precision using the intuitive mobile interface.
Balanced Spectrum and High PAR
With 168 high-output LEDs and a superior 90 CRI rating, this light delivers powerful PAR values and excellent color fidelity at all depths-ideal for demanding planted tanks.
Waterproof and Versatile Design
IP67-rated for waterproof protection, the light also features extendable brackets for quick mounting across aquariums from 23 to 35 inches. Optional suspension kits allow for alternative mounting styles.
Specifications
Item #: 16886
Size Range: 23" to 35" (59-89 cm)
Ideal For: Freshwater and heavily planted aquariums
Control Type: FluvalConnect mobile app via Bluetooth Mesh
LED Count: 168
Wattage: 32W
Lumen Output: 2550 lm
Color Temperature: 7500 K
Color Rendering Index (CRI): 90
Rated Lifespan: 50,000 hours
PAR Values (at depth): 3" - 640, 6" - 290, 12" - 120, 18" - 70
LUX Values (at depth): 3" - 28,000, 6" - 15,000, 12" - 6,500, 18" - 3,600
Waterproof Rating: IP67
Country of Origin: Germany (engineered)
Mounting Options: Extendable brackets (included), suspension kit (sold separately)
Warranty: 2 years standard + 2-year extension with online registration
What's Included
Fluval Plant 4.0 LED Light Fixture (23-35" range)
Extendable mounting brackets
Quick start installation guide
2-year standard warranty (extendable to 4 years with registration)
The Kessil APX9s redesigned optics provide an even light distribution that blankets your aquarium with up to 48" of coverage. This uniform coverage minimizes hotspots and creates an effect similar to that of a metal halide/T5 combo. In addition to Kessil's signature Tuna Blue spectrum, the AP9X features a full range of individually adjustable color channels (red, green, purple) that can be accessed via the Kessil app. Kessil Logic ensures that cosmetic color settings do not interfere with the core spectrum, allowing users to dial in a preferred color without disturbing coral health. The AP9X also includes 395nmLED chips, which emit True UVA light for maximum coral coloration.Par EfficientPAR measures all visible light (400-700nm) unweightedly, but coral health primarily relies on the 425nm (violet) and 455nm (royal blue) wavelengths. Kessil LEDs focus on these essential wavelengths, prioritizing coral growth and propagation over inflatedShimmerThe signature Kessil shimmer effect gives your tank a beautiful, natural, sunlit look comparable to the shimmer of a Metal Halide fixture - replicating your own piece of the ocean.Perfect Color MixingOur patented Dense Matrix Array allows us to pack 55 LED chips into a space smaller than a quarter. With 110 LED chips in two arrays, the AP9X has the best color mixing in the industry - no diffuser necessary and no disco - ball effect!Advanced DimmingMimic natural day/night cycles and lunar phases with smooth dimming down to 0.1% - from a gentle sunrise to the faintest moonlight.Penetration55 LED chips in a single array create a powerful light source with wide coverage. Maximum penetration reaches up to 30" beyond the water's surface for most reefs. Penetration can be further enhanced by positioning units closer together.Kessil EcosystemThe AP9X can be easily wired to adjacent Kessil fixtures. Lights in a wired group can then be controlled by an app via the AP9X's WiFi connection. A single AP9X can act as the wireless access point for up to 32 X-Series lights and 20 0-10V lights.K-Link + WiFiMultiple - fixture setups can be controlled via individual WiFi connections or daisy-chained together to access up to 32 lights via one master fixture. Turn off the WiFi and control the AP9X with the built-in manual controls or the Spectral Controller X if you want to reduce WiFi signals or interference.Sleek yet RobustNot just a box of LEDs - the AP9X compliments the natural beauty of a well-maintained aquarium. With design elements inspired by marine fauna, high performance automotive engineering, and the sun itself, the AP9X boasts a sleek, unobtrusive profile with an aesthetically pleasing touch panel.Single Arm MountThe new AP9X Mounting Arm lets the fixture be mounted with a single arm - the most light spread from a single arm mount fixture on the market. The integrated swivel joint allows 60 degrees of vertical rotation and 180 degrees of horizontal rotation. Allowing you to adjust your light to the orientation best suited for your tank (Mounting arm sold separately)Densest Matrix YetThe latest iteration of Kessil's Dense Matrix array enables us to place the chips closer than ever before. More chips in a tighter space results in better color mixing and a brighter single point source - just like the Sun on a natural coral reef.More Light, Less HeatMore efficient LED chips and better heat management result in less energy being lost as heat. This means more light for your reef with the same power draw as before. The AP9X sports a newly redesigned heat sink and an efficient vortex fan that reduces the accumulation of dust and debris - extending longevity and enhancing efficiencyTechnical Specifications Dimensions: 16.46" x 5.71" x 1.42" (41.8cm x 14.5cm x 3.6cm) Unit Weight: 2.05lbs / 0.93kg Spectrum: Tuna Blue + Red +Green + Purple (Violet+Indigo) Coverage: Up to 48" x 24" (122cm x 61cm) Power Adapter: 100 - 240V AC/ 50 - 60 Hz (Input), 48V DC (Output) Power Consumption: AC 185W Max.
These sleek, extruded aluminum strip lights are packed with ultra-bright LEDs rivaling even the brightest T5's. Completely water resistant and low-voltage provides a super safe solution for any application. Thermally efficient LED design allows for no cooling fan or need for costly water chillers and best of all operates in complete silence.No matter what your application is, store-use, canopy installation, or direct placement on an aquarium, the TrueLumen Pro Strips are the perfect fit. Four color options provides variety for freshwater, saltwater, reef and planted aquariums. Excellent for adding shimmer and glitter lines, promoting strong coral and plant growth and enhancing colors you've never seen before.Adjustable docking mounts are simple to install and allow the TrueLumen Pro Series LED strips to be attached to any aquarium. Constructed from aluminum, the legs lift the LED strip 1.5" above the tank.TrueLumen Pro Series LED strip lights finally offer aquarists features they've always needed. The energy efficient, long life, ultra-bright LED chips emit a sharp spectrum of light promoting growth and color - not algae. Protected by a proprietary silicone cover, they are completely water resistant and designed to last. Powered by a 24 volt low-voltage transformer, they are connectable using our splitters - providing for future expansion and flexibility. Powerful and feature rich, the TrueLumen Pro Series LED strip lights are the simple and safe solution for marine & freshwater aquarists from the hobbyist to the professional. Specifications Fixture Dimensions: 24"L x 0.8"W x 0.7"H Color: Deepwater Blue – Sharp 453nm actinic blue lighting for providing the necessary wavelengths for promoting strong coral growth & enhancing brilliant coloration. See all of the product videos online. Maximum Power Consumption: 16 Watts Number of Diodes: 144 Max. Number of Strips for 1 - 60W Transformer: 3 What's Included: Each TrueLumen Pro Series LED Strip light includes LED light with a 6' cable, swivel brackets with mounting hardware and instructions. Connect multiple TrueLumen Pro Series LED strip lights together using our optional 3-way splitter. Note: Power Supply, Legs, and 3-Way Splitter sold separately. TrueLumen Pro Marine Aquarium Sizing Guide
Fluval Reef 4.0 LED Aquarium Light - 23-35 Inch
Advanced Spectrum Healthy Coral Growth
Overview
The Fluval Reef 4.0 LED 25-35 Inch model is crafted to meet the needs of thriving reef aquariums. With full-spectrum lighting and strong actinic output, it enhances coral coloration and drives essential photosynthesis.
Mobile App Control with FluvalConnect
Easily manage light spectrum, brightness, and timed cycles through the FluvalConnect app using Bluetooth Mesh technology. Create smooth transitions that mimic natural sunlight and moonlight phases.
Full Actinic Spectrum and Coral Fluorescence
Featuring critical blue and UV peaks, this LED system fuels coral fluorescence while providing consistent PAR values across a wide tank area. A 25000 K color temperature ensures optimal lighting balance.
IP67 Waterproof Housing and Flexible Mounting
German-engineered with a sealed waterproof design, the fixture includes extendable brackets for tanks ranging from 23 to 35 inches wide. A suspension kit is available for overhead mounting options.
Specifications
Item #: 16906
Size Range: 23" to 35" (59-89 cm)
Ideal For: Saltwater reef aquariums
Control Type: FluvalConnect mobile app via Bluetooth Mesh
LED Count: 168
Wattage: 32W
Lumen Output: 1550 lm
Color Temperature: 25000 K
Color Rendering Index (CRI): 65
Rated Lifespan: 50,000 hours
PAR Values (at depth): 3" - 450, 6" - 230, 12" - 100, 18" - 55
LUX Values (at depth): 3" - 19,000, 6" - 11,000, 12" - 4,500, 18" - 2,300
Waterproof Rating: IP67
Country of Origin: Germany (engineered)
Mounting Options: Extendable brackets (included), suspension kit (sold separately)
Warranty: 2 years standard + 2-year extension with online registration
What's Included
Fluval Reef 4.0 LED Light Fixture (23-35" range)
Extendable mounting brackets
Quick start installation guide
2-year standard warranty (extendable to 4 years with registration)
Aqua Illumination Blade Freshwater LED - 30 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Ecotech Radion XR15FW Pro Freshwater LED Light
Overview
The best aquarium light should excel at two things: The first is in providing the intensity and color light that freshwater life needs to grow and thrive. The second is to accomplish the expectations of the aquarist. The G5 Radion Lineup does both.
Next Level Color
G5 brings speed of growth, intensity of fluorescence, and nuance of color rendition to new heights. Crafted with the best LEDs, the optimized output from next-generation HEI Optics, and more color channels, Gen 5 is in a class of its own.
Beyond Peak PAR
More powerful than ever before, the Radion lineup delivers more coverage per fixture. The new single cluster design and optimized optics cut hot-spot PAR by 30% and provide 35% more total output. In the aquarium, this translates to more usable light over more area, creating the widest possible ideal par from your coral.
Advanced Heat Management
The G5 continues to showcase Radion's sleek styling and small footprint, but is now even quieter. A completely redesigned fan and newly evolved heat sink cool the Gen 5 more efficiently, allowing the fan to run at lower speeds. Your ears will notice a difference.
Mobius Control
More colors mean more channels, and with Mobius, programming and controlling your G5's increased power is even easier and faster. Mobius means almost instant setup and programming. Local wireless control and programming can be accomplished with either current OS version iOS or Android smart device. Off-site WiFi control is missing from the G5 at launch but will be enabled in the near future. Once again, the Radion will set new standards for technologically advanced and innovative control.
Freshwater Radion Moonlight
The Generation 5 sets the mood with two dedicated low output moonlight LEDs, each on an independently controllable channel.
Total Luminance Radion Freshwater LED
Impressive performance improvements in the G5 platform come from shifting energy wasted as hot spots to total luminance. The result is a significant increase of usable in-tank light, more even coverage, and visually brighter, more pervasive light in the aquarium. This includes: A wider light spread, overall 35% more light entering the aquarium, beautiful caustics, and smoother color mixing.
Features
ProFrom Aquaculture to the home aquarium, there is a high likelihood that the coral you know and love has been grown or "colored-up" under a generation of Radion Pros. Powerful. Flexible. Proven.
Full Spectrum
8 Channels
Radion Pro's Balanced LED Mix
Proven Halide Spectrum and Previous Pro Spectrum
Flexible Spectral Output
Specifications
Dimensions: 7"L x 7"L x 1.5"H (18cm x 18cm x 3.9cm) Weight: 3.5lbs (1.59 kg) Power consumption: 90 WattsTotal of 48 leds 12 Warm White24 Cool Blue3 Photo Red3 Green2 Blue2 Lime1 White Moonlight1 Blue Moonlight
Please Note: All G5 HMS slides, rails and mounts will work with the XR15FW Pro LED light. *Offer only valid with the purchase of matching LED and limited to 1 Arm per LED (maximum 2 arms per order)
Aqua Illumination Blade Coral Grow LED - 39 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 30 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aquatic Life Hybrid G3 T5/LED Light Fixture - 24 Inch
Overview
Many reef aquarists want to mix fluorescent T5 tubes with modern LED reef lighting to capture the brilliant color rendition of T5 lamps and retain the powerful output of LED The Aquatic Life Hybrid G3 fixture provides a safe universal LED mounting system compatible with major LED brands and integrates up to four T5 HO lamps for maximum reef illumination
Features
Universal mounts secure EcoTech Radion XR30w XR15w Kessil A360 and AI Hydra LED fixtures
Robust anodized aluminum frame with concealed power cable routing for safety and aesthetics
Dual reflector bays for up to four T5 HO lamps delivering even spectral spread
HEP-brand ballasts for quiet flicker-free operation
Silicon end caps protect lamp pins from salt spray
Available in lengths for 18-30" tanks
Specifications
Capacity: 4 × 24W T5 HO bulbs
LED brackets: 6 standard brackets included (Kessil mounts sold separately)
Dimensions: 24"L × 18"W (front-to-back)
Weight: 12 lbs
What's Included
G3 Hybrid fixture frame
Universal LED mounting brackets
Dual T5 reflector bays and silicon end caps
Suspension cables and hardware
High-output T5 bulbs and LED fixtures sold separately
Aqueon LED Clip-On Light - Freshwater
Overview
Convenient and affordable options to add LED lighting in any aquarium. These elegant super thin Clip-On LED lights hover over the aquarium, providing optimal lighting for a bright & thriving environment.
Soft-touch switch LED, easily mounts on framed or frameless aquariums using versatile mounting screw. 21 Bright LED's for shimmering illumination. Ideal for freshwater aquariums up to 20 gallons.
Features
Easily mounts on framed or frameless aquariums using versatile mounting screw.
Elegant super thin design.
Quick 2-way soft-touch control (On/Off).
21 bright LEDs help your tank to shimmer!
Ideal for freshwater aquariums up to 20 gallons.
What's in box your Aquarium Light
1 LED Light
1 Mounting Screw
1 Transformer
Setup instructions.
Fluval Plant 4.0 LED Aquarium Light - 35-49 Inch
Engineered Premium Plant Growth
Overview
The Fluval Plant 4.0 LED is designed to deliver optimal spectral performance for vibrant aquatic plant health. With high-output LEDs and a spectrum tailored for photosynthesis, it supports lush growth in large planted aquariums.
Wireless App Control via FluvalConnect
Control all lighting functions using the FluvalConnect app over Bluetooth Mesh. Adjust color spectrum, brightness, and fully program sunrise to moonlight cycles for a natural and immersive lighting experience.
Strong PAR Output with Vivid Color Rendering
With a powerful 90 CRI rating and superior PAR values, this fixture promotes healthy plant growth while maintaining accurate color fidelity throughout the aquarium depth.
IP67 Waterproof and Expandable Mounting
Built with durable housing and advanced waterproofing, the Plant 4.0 resists splashes and humidity. It includes extendable brackets for simple installation across 35 to 49 inch tanks, with optional suspension mounting available.
Specifications
Item #: 16887
Size Range: 35" to 49" (88-126 cm)
Ideal For: Freshwater and heavily planted aquariums
Control Type: FluvalConnect mobile app via Bluetooth Mesh
LED Count: 252
Wattage: 46W
Lumen Output: 3650 lm
Color Temperature: 7500 K
Color Rendering Index (CRI): 90
Rated Lifespan: 50,000 hours
PAR Values (at depth): 3" - 700, 6" - 310, 12" - 130, 18" - 80
LUX Values (at depth): 3" - 31,000, 6" - 16,000, 12" - 7,000, 18" - 4,200
Waterproof Rating: IP67
Country of Origin: Germany (engineered)
Mounting Options: Extendable brackets (included), suspension kit (sold separately)
Warranty: 2 years standard + 2-year extension with online registration
What's Included
Fluval Plant 4.0 LED Light Fixture (35-49" range)
Extendable mounting brackets
Quick start installation guide
2-year standard warranty (extendable to 4 years with registration)
Hygger Full Spectrum LED Aquarium Light - 16 Watt
Overview
This red, blue and white light aquarium LED is super bright as it contains 5730 large LEDs.
Recommended for fish tanks 12 inches to 52 inches in width. The Hygger Full Spectrum LED Aquarium Light can also support growth on low-to-mid light-level plants.
Features
Adjustable Light Bracket - The RBW light comes with 2 metal and 2 plastic mounting brackets, which are both freely extendable. You can easily install this red blue white light on most aquarium tanks, with a cover or not, with rims or rimless. The aquarium light bracket is suitable for max 24 mm thickness glass.
3 Light Color Modes - This aquarium RBW light has 3 light modes: white LEDs, blue+white+red LEDs, and red+ blue LEDs. It is very easy to change the color by pressing the second button 1 to 3 times on the controller. Color changes will make your aquarium change to 3 different wonderful views.
Dimmable & Timing - You can adjust the light brightness from 100% to 10% according to your preference, with 5 levels of brightness in total. By setting the time button, you can change the light brightness from 100%/77%/55%/32%/0%. As well, on the external controller, you can set the lighting time to 3, 6, or 12 hours by pressing the third button 1 to 3 times.
Durable & Warranty - The low-profile mounting bracket fish tank is light with an aluminum alloy metal shell, which has a nice feel and a fast heat dissipation rate. With high-quality LEDs, the light is energy efficient and can last up to 20,000 hours of lighting. Hygger provides a 1-year warranty for this blue-white aquarium light.
Specifications
Power AC100-240V/60Hz / DC12v
Power Consumption: 16 Watts
Dimensions: 22.2"L x 3.2"W
Number of LEDs: 42 - 30 White / 8 Blue / 4 Red
Lumen Output: 903
Color Temperature 6500K
Suitable Aquarium Length: 24-30"
Power Cord Length: 5.0' to adapter / 1.8' to wall
Aqua Illumination Blade Freshwater LED - 21 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Neptune GRO Refugium Light - Pipe Mount
Overview
The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha) using a specialized light spectrum which maximizes photosynthesis. It plugs directly into any available DC24 port in your Apex ecosystem, or alternatively, it can also be run completely standalone.Compact Design
Compact, flat, rectangular LED grow light measures 8.7" X 6.1" X 1.4" making it the perfect fit for the smaller refugium compartments in many modern aquariums - as well as those that wish to grow macroalgae in a separate refugium.84 LEDS With Optimum Spectrum84 LEDs in four colors create an evenly distributed spectrum optimized for macroalgae growth. Two key wavelengths for algae photosynthesis are emphasized - 455-460nm and 620-670nm.Large Surface Area of Illumination with Less Spillage
Large, rectangular form promotes better algae growth, while reducing nuisance algae from light spillage, as intensity is evenly spread across a refugium area that is almost always rectangular. The GRO can effectively cover a refugium area up to 18"x24"Even Light Distribution With No Hot Spots
Round, spotlight style refugium lights, often create uneven spread of intensity. This causes hotspots that lead to algae burning or stunted growth. With the GRO, the 84 LED in a rectangular form factor create even light intensity and no hotspots.Less Nuisance Algae Due To Light Spillage
Nuisance algae on in our sumps and on our equipment is normally one of the downsides of using a refugium. Since most refugia are rectangular, the GRO projects light in a similar manner. Also, with its low-power, distributed LED design, the GRO can be placed very close to the water surface further limiting light spillage and therefore nuisance algae.IP64 Water Resistant Design
The GRO is IP64 rated which means splashes and salt spray will not take it down. This means it can safely be placed close to the water surface, maximizing light effectiveness, and reducing wasteful light spillage that often causes nuisance algae in other parts of a system.Easily Connects To A Free DC24 Port
Power the GRO using an available DC24 connection in your Apex ecosystem (on Energy Bar 832 or 1LINK module).Operates As A Standalone Light As Well
If you do not have an available DC24 port, or you wish to use the GRO without an Apex, a power supply is available so it will operate standalone.Two Mounting Options
An available gooseneck mount comes in two models: A traditional clamp style mount to attach it to the edge of your sump. And a unique pipe-clamp mount to attach it to your existing plumbing above or behind your sump.
Features
Compact LED grow light with 84 LEDs in four colors, two key spectrum ranges for optimal macroalgae growth
Large, flat area of illumination promotes better growth as it creates a much more even spread than single, spotlight-style lights.
Distributed LED design means no light hotspots that can burn the macroalgae
Less light spillage - IP64 water resistance means it can be placed very close to water - reducing the growth of nuisance algae elsewhere
Two focused wavelength bands (455-460nm and 620-670nm) for maximum algae photosynthesis
Covers a refugium area up to 18"x24"
Plugs directly into DC24 connection on an EnergyBar832 or a 1Link module.
Dimensions: 8.7" x 6.1" x 1.4" (light panel itself less than 1" high)
Works with any Apex model, including the Apex Classic family.
Operates standalone, without an Apex, with the purchase of an optionally available power supply.
Mounts using the optionally available, flexible gooseneck, with one of two clamp styles
What's Included
GRO LED Light
Flexible gooseneck mount
Pipe clamp mounting bracket
Power supply is NOT included - You will need the Neptune PS-DC24 (Power Supply for 24V Devices) if you wish to operate this as a stand-alone unit.
The big brother of the H80 Tuna Flora, The H160 can be used for larger applications where the H80 just doesn't give you enough light. This light is the perfect color blend for refugiums or planted aquariums - great for algae/plant growing.Full Spectrum with UV and InfraredThe H160 Tuna Flora features four efficient spectrums - BLUE, GROW, BLOOM, RED - in one single fixture. The light is perfectly blended, with wavelengths including near UVA and Infrared (ranging from 380-780 nm), enhancing photosynthetic efficiency. The BLUE spectrum quickly develops the frame of a plant during every stage by promoting prolific stem extension. The GROW spectrum is designed to produce all-around vegetative growth throughout the life cycles of many different plants. The BLOOM spectrum boosts yield by encouraging plentiful flowering during the plants' crucial reproductive stage. The RED spectrum is designed for tissue culture and cloning by producing maximum root growth during the plant's whole life. During the finishing stage, the RED spectrum also increases the plants' productivity and the quality of the harvest. Intensity & PenetrationOur patented Dense Matrix LED technology produces a concentrated single point source with enough power to penetrate past the canopy and deliver light to the entire plant. The high-quality optic design ensures minimal light loss and uniform plant growth, perfect for most refugiums as well.Adjustable Spectrum with Dimming CapabilitiesEasy-to-use intensity and color dials allow the user to switch between the spectrums and adjust intensity from 10% to 100%, maximizing flexibility and convenience.Simple External Control and ProgrammingH160 Tuna Flora fixtures can be controlled with the easy-to-use Spectral Controller and daisy-chained with other Kessil 0-10V controllable lights. Use the Spectral Controller to create custom day-night schedules for plants with differing needs. The H160 Tuna Flora is also compatible with any 0-10V controller.Heat ManagementThe H160 Tuna Flora features advanced thermal management for consistent light output while consuming minimal power and producing less heat than traditional lights.Specifications Fixture Dimensions: 4" x 2.48" (Length x Diameter) Coverage Area: Up to 24" surface diameter. Multiple fixtures can be daisy-chained together with the Unit Link Cables (sold separately) for larger refugiums. Power Consumption: Up to 40W Maximum. Power Supply: 100-240V AC (input), 19V DC (output) What's in the Box 1 - H160 Tuna Flora 1 - 19V-60W Power Supply 2 - Golden Metal Hooks 2 - Brackets 1 - Gooseneck Mount (Gooseneck sold separately)
These sleek, extruded aluminum strip lights are packed with ultra-bright LEDs rivaling even the brightest T5's. Completely water resistant and low-voltage provides a super safe solution for any application. Thermally efficient LED design allows for no cooling fan or need for costly water chillers and best of all operates in complete silence.No matter what your application is, store-use, canopy installation, or direct placement on an aquarium, the TrueLumen Pro Strips are the perfect fit. Four color options provides variety for freshwater, saltwater, reef and planted aquariums. Excellent for adding shimmer and glitter lines, promoting strong coral and plant growth and enhancing colors you've never seen before.Adjustable docking mounts are simple to install and allow the TrueLumen Pro Series LED strips to be attached to any aquarium. Constructed from aluminum, the legs lift the LED strip 1.5" above the tank.TrueLumen Pro Series LED strip lights finally offer aquarists features they've always needed. The energy efficient, long life, ultra-bright LED chips emit a sharp spectrum of light promoting growth and color - not algae. Protected by a proprietary silicone cover, they are completely water resistant and designed to last. Powered by a 24 volt low-voltage transformer, they are connectable using our splitters - providing for future expansion and flexibility. Powerful and feature rich, the TrueLumen Pro Series LED strip lights are the simple and safe solution for marine & freshwater aquarists from the hobbyist to the professional. Specifications Fixture Dimensions: 48"L x 0.8"W x 0.7"H Color: Deepwater Blue – Sharp 453nm actinic blue lighting for providing the necessary wavelengths for promoting strong coral growth & enhancing brilliant coloration. See all of the product videos online. Maximum Power Consumption: 30 Watts Number of Diodes: 288 Max. Number of Strips for 1 - 60W Transformer: 2 What's Included: Each TrueLumen Pro Series LED Strip light includes LED light with a 6' cable, swivel brackets with mounting hardware and instructions. Connect multiple TrueLumen Pro Series LED strip lights together using our optional 3-way splitter. Note: Power Supply, Legs, and 3-Way Splitter sold separately. TrueLumen Pro Marine Aquarium Sizing Guide
Neptune Lunar Simulator Module - LSM
Overview
Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight conditions and for some fish and coral it is important for the reproductive process. Also, night predators come out and cruise, while prey go into hiding.
The other benefit of moonlights is that it extends the time you can enjoy your aquarium and in a totally different way. We all like to go to our tank with a flashlight and see what's going on, but it can often startle many creatures and send them into hiding. With a moonlight, your tank has just enough light for you to see many of the fascinating things going on in the aquarium after the main lights go down.
With the Apex and the LSM - Lunar Simulator Module, you can load in the entire years lunar cycle data and your moonlight LED will dim and brighten according to the true lunar cycle. This has been shown to benefit spawning cycles in some tank organisms.
Features
High intensity LEDs with a wide angle lens (100+ degrees) to provide the best possible coverage
The AquaController dims the LEDs in phase with the true lunar cycle
Available with 2 to 5 LEDs
Plug and Play. Automatically recognized when installed into the system
Two AquaBus connectors for flexible expansion to other modules via AquaBus
Upgradable firmware
Compatible with all Apex systems
Includes with 3' AquaBus cable.
Please Note: Lunar LED's are NOT included with this package. They are purchased separately!
Fluval Reef 4.0 LED Aquarium Light - 35-49 Inch
Powerful Reef Lighting Mid to Large Tanks
Overview
The Fluval Reef 4.0 LED 35-49 Inch model is designed to meet the light demands of coral-intensive marine aquariums. With full-spectrum actinic output and app-based control, it ensures vibrant coral health and color.
FluvalConnect App Complete Control
Using the FluvalConnect app and Bluetooth Mesh technology, you can customize spectral output, control brightness, and create natural day-to-night transitions-all from your smartphone.
Actinic Spectrum with High PAR Output
This unit features essential blue and UV peaks to support coral photosynthesis and vivid fluorescence. Its 25000 K spectrum and balanced PAR ensure optimal performance across the entire tank depth.
Rugged Waterproof Build with Flexible Installation
IP67 waterproof housing and premium materials ensure long-lasting durability. Mounting brackets are included for aquariums 35 to 49 inches wide. A suspension kit is available for overhead setups.
Specifications
Item #: 16907
Size Range: 35" to 49" (88-126 cm)
Ideal For: Saltwater reef aquariums
Control Type: FluvalConnect mobile app via Bluetooth Mesh
LED Count: 252
Wattage: 46W
Lumen Output: 2250 lm
Color Temperature: 25000 K
Color Rendering Index (CRI): 65
Rated Lifespan: 50,000 hours
PAR Values (at depth): 3" - 460, 6" - 240, 12" - 110, 18" - 65
LUX Values (at depth): 3" - 20,000, 6" - 13,000, 12" - 5,000, 18" - 3,100
Waterproof Rating: IP67
Country of Origin: Germany (engineered)
Mounting Options: Extendable brackets (included), suspension kit (sold separately)
Warranty: 2 years standard + 2-year extension with online registration
What's Included
Fluval Reef 4.0 LED Light Fixture (35-49" range)
Extendable mounting brackets
Quick start installation guide
2-year standard warranty (extendable to 4 years with registration)
Fluval Plant 4.0 LED Aquarium Light - 46-61 Inch
Maximum Performance Planted Tanks
Overview
The Fluval Plant 4.0 LED delivers powerful, spectrum-specific lighting tailored to support vigorous aquatic plant growth and natural color rendering in large freshwater aquariums. Built for hobbyists who demand professional-grade output.
Full Control with FluvalConnect
Program and customize your lighting from anywhere using the FluvalConnect app with Bluetooth Mesh. Control spectral output, intensity, and create a seamless 24-hour light cycle with sunrise, daylight, dusk, and moonlight transitions.
Superior PAR and Wide Spectrum Output
Equipped with 336 high-performance LEDs, this unit delivers strong PAR values and an impressive 90 CRI, ensuring accurate color rendering and optimal energy for plant photosynthesis across all depths.
Waterproof Build with Flexible Mounting
The IP67-rated construction ensures moisture and splash protection. Extendable brackets provide secure mounting across aquariums from 46.25 to 61 inches wide. Suspension mounting is also available for customized setups.
Specifications
Item #: 16888
Size Range: 46.25" to 61" (117-155 cm)
Ideal For: Freshwater and heavily planted aquariums
Control Type: FluvalConnect mobile app via Bluetooth Mesh
LED Count: 336
Wattage: 59W
Lumen Output: 4700 lm
Color Temperature: 7500 K
Color Rendering Index (CRI): 90
Rated Lifespan: 50,000 hours
PAR Values (at depth): 3" - 750, 6" - 320, 12" - 140, 18" - 90
LUX Values (at depth): 3" - 33,000, 6" - 17,000, 12" - 7,500, 18" - 4,500
Waterproof Rating: IP67
Country of Origin: Germany (engineered)
Mounting Options: Extendable brackets (included), suspension kit (sold separately)
Warranty: 2 years standard + 2-year extension with online registration
What's Included
Fluval Plant 4.0 LED Light Fixture (46.25-61" range)
Extendable mounting brackets
Quick start installation guide
2-year standard warranty (extendable to 4 years with registration)
Hygger Full Spectrum LED Aquarium Light - 14 Watt
Overview
This red, blue and white light aquarium LED is super bright as it contains 5730 large LEDs.
Recommended for fish tanks 12 inches to 52 inches in width. The Hygger Full Spectrum LED Aquarium Light can also support growth on low-to-mid light-level plants.
Features
Adjustable Light Bracket - The RBW light comes with 2 metal and 2 plastic mounting brackets, which are both freely extendable. You can easily install this red blue white light on most aquarium tanks, with a cover or not, with rims or rimless. The aquarium light bracket is suitable for max 24 mm thickness glass.
3 Light Color Modes - This aquarium RBW light has 3 light modes: white LEDs, blue+white+red LEDs, and red+ blue LEDs. It is very easy to change the color by pressing the second button 1 to 3 times on the controller. Color changes will make your aquarium change to 3 different wonderful views.
Dimmable & Timing - You can adjust the light brightness from 100% to 10% according to your preference, with 5 levels of brightness in total. By setting the time button, you can change the light brightness from 100%/77%/55%/32%/0%. As well, on the external controller, you can set the lighting time to 3, 6, or 12 hours by pressing the third button 1 to 3 times.
Durable & Warranty - The low-profile mounting bracket fish tank is light with an aluminum alloy metal shell, which has a nice feel and a fast heat dissipation rate. With high-quality LEDs, the light is energy efficient and can last up to 20,000 hours of lighting. Hygger provides a 1-year warranty for this blue-white aquarium light.
Specifications
Power AC100-240V/60Hz / DC12v
Power Consumption: 14 Watts
Dimensions: 16.3"L x 3.2"W
Number of LEDs: 39 - 30 White / 6 Blue / 3 Red
Lumen Output: 834
Color Temperature 6500K
Suitable Aquarium Length: 18-24"
Power Cord Length: 5.0' to adapter / 1.8' to wall
Aqua Illumination Blade Freshwater LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 48 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
