Neptune Trident Service Kit
Overview
The DIY Service Kit is an option that is great for our customers that would like to complete the recommended service on their own. This is only for a most hand-on customers that consider themselves "mechanically inclined", and can follow directions well.
We recommend, but not require, that your Neptune Systems Trident receive a preventative service between 24-36 months of operation. It's possible some Tridents will need to be serviced before this recommended service interval, but that would be the exception not common place. Note: Your Trident should be in good working condition prior to servicing. The service kit will in most circumstances not fix a Trident that is not working!
What's Included
Replacement Peristaltic Pump
Cuvette and Tubing
Internal Tubing Assembly
Trident Sample Line Filter
Sample & Waste Line plus connectors
Full Service Video (see below)
Hydros Triple Optical ATO Kit
Overview
HYDROS Triple Optical ATO Kit delivers advanced and reliable auto top-off protection for your aquarium system. Designed to integrate seamlessly with HYDROS Controllers, this kit uses three highly accurate optical sensors to monitor water levels and provide redundant safeguards-preventing overfilling and protecting your livestock.
With its triple-sensor design, this ATO system offers a level of safety and precision beyond standard two-sensor setups. The first sensor activates the fill pump when water drops, the second confirms proper operation, and the third acts as a failsafe-offering multilayered protection you can trust. Easy to install and configure using the HYDROS App, this kit supports long-term reef stability by keeping salinity consistent and minimizing evaporation effects.
Ideal for sumps, nano tanks, and full-size reef systems, the HYDROS Triple Optical ATO Kit is built for reefers who demand performance and peace of mind from their automation gear.
Key Features
Triple optical sensors provide accurate water level control and redundant safety
Prevents overfills dry runs and pump failures with independent sensor logic
Fully compatible with HYDROS Controllers and configurable through HYDROS App
Simple plug-and-play setup with magnetic sensor mounts
Ideal for saltwater reef tanks AIO systems and freshwater aquariums
Long-lasting durable construction with reef-safe materials
Recommended Uses
Automated top-off systems for marine and reef aquariums
Fail-safe water level monitoring for critical sump applications
Reliable fluid level control for nano tanks and small AIO setups
Custom sensor logic with HYDROS WiFi or Control systems
What's Included
3x HYDROS Optical Water Level Sensors
1x HYDROS DC-powered ATO Pump
Sensor magnet mounts
Mounting accessories and tubing
Power adapter and fittings
Quick-start guide for fast setup
Why Choose
Maintaining stable water levels is vital for a healthy reef tank. Manual top-offs are inconsistent and time-consuming-and many ATO systems fail due to single-sensor limitations. The HYDROS Triple Optical ATO Kit offers unmatched safety by using three separate sensors to ensure top-offs are performed reliably and stopped at the right time. Fully integrated into the HYDROS ecosystem this kit gives reef keepers the confidence to automate their system without sacrificing precision or protection.
Hanna PH/Conductivity/TDS Tester - HI98129
Overview
The Hanna HI98129 Tester is a highly accurate, waterproof pH meter that can also measure EC/TDS in the low range (0 to 3999 uS/cm EC/ 0 to 2000 ppm TDS) and temperature.
This floating, waterproof combination tester has an easy to read, LCD and an automatic shut-off. In addition, pH and EC/TDS readings are automatically temperature compensated (ATC) to prevent temperature-related variations in your measurements.
For EC/TDS readings, the EC/TDS conversion factor (CONV) is selectable by the user, as well as the temperature compensation coefficient B (BETA).
The HI98129 tester features an easy to replace pH electrode cartridge with an extendable cloth junction. The extendable cloth junction helps increase electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted. Also, the sturdy, snap-in connector means there are no pins to bend or break!
Features
3 Sensors in a Single Meter: pH electrode with extractable junction Amperometric EC/TDS sensor Exposed temperature probe for faster EC/TDS readings
Waterproof: Designed to float if accidentally dropped in sample
Wide pH Range: pH range is from 0.00 to 14.00 pH
Selectable EC to TDS Conversion Factor: Choice of either a 0.45 or 1.0 conversion factor
Automatic Temperature Compensation: All readings are compensated for variations in temperature. Temperature displayed in Celsius or Fahrenheit along with pH, EC or TDS reading
Stability Indicator: Meter displays a clock tag that will disappear when the reading has achieved stability
HOLD Button: Freezes reading on the display to allow recording of measurement
BEPS (Battery Error Prevention System): Meter will automatically shut off if there is not enough power to get an accurate measurement
Battery % Level at Startup
Low Battery Indicator: When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition.
Auto-off: Auto-off feature automatically shuts off meter after 8 minutes of non-use to maximize battery life
Specifications
pH Range: 0.00 to 14.00 pH
pH Resolution: 0.01 pH
pH Accuracy: +/-0.05 pH
pH Calibration: automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
EC Range: 0 - 3999 uS/cm
EC Resolution:1 uS/cm
EC Accuracy:+/- 2% F.S.
EC Calibration: Automatic, one-point at 1413 uS/cm
EC/TDS Temperature Compensation: Automatic with Beta Adjustable from 0.0 - 2.4% /C
Temperature Range: 0.0 - 60.0C / 32.0 - 140.0F
Temperature Resolution: 0.1C / 0.1F
Temperature Accuracy: +/- 0.5C or +/- 1.0 F
pH Electrode: H73127 replaceable pH electrode (included)
Automatic Shut-Off: 8 minutes,
Battery Type/Life: 1.5V CR2032 (1) / approximately 100 hours of continuous use
Environment: 0 to 50C (32 to 122F); RH max 100%
Dimensions: 163 x 40 x 26 mm (6.4 x 1.6 x 1")
Weight: 100 g (3.5 oz.)
Hanna Replacement Test Reagent Vial
Overview
Replacement Test Reagent Vial for Hanna Water Checkers.
Single Test Vial with replacement stopper included.
Hanna Ammonia Checker Reagent - Marine
HC Checker Reagents Ammonia HI784-25
Pre-made reagents for ease of use
Prepared with high-purity chemicals
Marked with expiration date and lot number for traceability
Each package comes with enough reagents for 25 tests
Overview
The Marine Ammonia Checker by Hanna reagents are high-quality reagents for use with the HI784 Marine Ammonia (ppm) Checker HC.
All reagents are clearly marked with the lot number and expiration date on each packet for traceability.
The HYDROS Leak Detection Rope Sensor is the first of its kind in the aquarium industry. The moment water comes into contact with it, that information can be used to alert you on your smartphone, sound an alarm, turn pumps off, and other actions that can protect your aquarium, home, or office from a total disaster.A problem with traditional solid surface leak sensors is that you have to buy several to really feel a sense of security. What are the odds water will pool in the exact spot where a single sensor sits?Another solution we've come up with is a rope-style water sensor. You can wrap it around your aquarium, sump, stand, or wherever else you like. This type of sensor makes a lot more sense when you want leak detection security in a wider area. You can configure the HYDROS app to perform whatever action(s) you want to happen when a leak is detected: flash a specific light color on your HYDROS controller, turn off a pump, shut down your protein skimmer, send you a mobile alert so you can come home (or ask a friend to check on the tank). It's easy to do and you're in control.Just plug the rope sensor into a Sense Port on your HYDROS device. Next, place the rope flat on the surface where liquid detection is desired. If tape is required to hold the rope in place, be sure to only apply it on the ends. You want to expose as much of the sensor as possible for maximum protection. Once the rope sensor is in place, it is very important to test it to ensure it's working properly. To perform a test, open the HYDROS app on your mobile device and configure the Sense port so the rope sensor is on. Drip a bit of tap water across the rope sensor so the black and white sensing cables come into contact with the liquid. Monitor the sensor's status in the HYDROS app to see check if it's reading is dry or wet. If everything looks good, you're done! Dry the cable and you're ready to configure alerts and equipment to take action if a leak occurs.You don't have to occupy another Sense port to secure a larger area. HYDROS Leak Detection Rope Sensors can be daisy-chained together to form a larger perimeter for protection. Got a big tank? You can lengthen the line of defense to lasso around your large aquarium by simply connecting multiple rope sensors together. Leak detector ropes do not need an additional power source, even if you connect them together. Rope leak detectors do not occupy outlets on power strips or require a HYDROS Drive port connection to operate.HYDROS Leak Detection Rope Sensors offer users 24/7 remote monitoring. Be instantly notified at the first sign of a leak so you can prevent a flood. Tap into the HYDROS app to immediately check the status of water parameters, equipment, power strips, and smart plugs. Make decisions based on real-time data to take appropriate corrective actions from anywhere and at any time.10 ways you can use the HYDROS Leak Detector Rope Place it alongside your aquarium Line it outside of your sum Wrap it around a reactor Lay it on the floor in an open area Fit it into a hard-to-read corner Wrap around plumbing pipes Mount it to a controller board Use it in your mixing station Affix it to water supply and return lines Remotely in your garage, bathroom, basement, laundry room, kitchen, or wherever you make or use water.
Hanna pH Tester - HI98103
Overview
The HI98103 Checker pH tester has been designed with many advanced features while maintaining the look and feel of the original Checker. The redesigned Checker now offers automatic calibration to one or two points, automatic buffer recognition, calibrated buffer tags, stability indicator, low battery indicator, and selectable automatic shut off.
The Checker plus still maintains the iconic pentagon design with a probe that measures 103 mm in length and tapered to a 8 mm diameter making it ideal for test tubes and vials
Features
Economical - The Checker is a full-featured pH tester at a price that anyone that needs to measure pH can afford.
Large LCD - Enhanced LCD that displays reading, stability indicator, low battery indicator and calibration tags.
Replaceable pH Electrode - The HI1271 * supplied gel filled pH electrode tapers to an 8 mm diameter at the sensing end. This narrow electrode easily fits into test tubes, vials, and other containers with small opening.
Automatic Calibration - The Checker is calibrated automatically to one or two points. The calibration buffers are automatically recognized and after calibration the buffer values used are shown on the display as a tag.
Stability Indicator - An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilized the indicator disappears and a reading can be recorded.
Automatic Shut-Off - The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto off feature can be disabled.
Long Battery Life - The Checker Plus has an exceptional long battery life of approximately 1000 hours. When the battery power is running low a low battery indicator is displayed.
Specifications
pH Range: 0.0 to 14.0 pH
pH Resolution: 0.1 pH
pH Accuracy: +/-0.2 pH
pH Calibration: Automatic, two points
pH Electrode: HI1271 pH electrode with screw type connector (included)
Automatic Shut-Off: 8 minutes, 60 minutes, or can be disabled
Battery Type/Life: 1.5V CR2032 (1) / approximately 1000 hours of continuous use
Environment: 0 to 50C (32 to 122F); RH max 95%
Dimensions: 50 x 174 x 21 mm (2 x 6.8 x 0.9")
Weight: 50 g (1.8 oz.)
Neptune Apex A3 Aquarium Controller
Core control and everyday monitoring your aquarium.
Overview
The Apex System offers the control but with scaled back monitoring when compared to the Apex Pro. The Apex come with room to grow should you wish more features down the road.
Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your smart phone when things go off track.
Monitors your equipment - ensuring it is operating correctly at all times - and lets you know when it's not.
Tracks your manual test results, maintenance, livestock purchases, and tank observations and helps you can correlate issues in your aquarium to the things that are happening inside.
Manages the full operation of equipment (lights, pumps, filters, ATO, etc.) on your tank with simple setup wizards and an easy to use app.
Takes the place of many costly and cumbersome discrete components such as light timers, heater controllers, pump controllers, etc.
Gives you the peace of mind to know how your aquarium is doing, instantly, from anywhere in the world.
Features
Onboard FMM accessory ports. The Apex Pro has a total of 3
Includes the new and improved Magnetic Optical Sensor
Includes the Sold Surface Leak Sensor (LD-2)
Includes the new and improved Temperature Probe
Neptune Apex is Wireless Internet Ready!
For years we have advocated a wired network connection for your Apex due to its superior reliability - and we still do. However, for many people a wired connection is just not possible.
So, for this Apex we spent countless man-hours developing an incredible 802.11g/n Wi-Fi connection with reliability that rivals a wired connection. And, the connection process to your home network is amazingly simple - getting you set up and on the Apex Fusion cloud service in just a couple of minutes!
Apex Energy Bar 832 Ultimate Power Control Hub
This Energy Bar 832 was redesigned from the ground up. Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports. Each individual outlet has power monitoring and there are individual LED indicators for each outlet. Read on and watch the videos for more info.Apex Power Monitoring: For years we have been asked to do the power monitoring of the individual devices connected to each outlet - but it just wasn't possible without breaking your bank. Now it's here and with comes tons of benefits. For many the cost of the electricity to run a successful aquarium is a major concern in their household. Even for those where electricity is cheap, we believe most aquarists care a great deal about their energy consumption and its effect on the environment. Ironically, our energy usage could be directly connected to excess greenhouse gasses, the warming of the oceans, and the bleaching of the corals! However, armed with the right information we believe aquarists will not only be able to make operating and purchase decisions that will save them hundreds of dollars a year, but they will also be able to reduce their carbon footprint.Built-In 1Link and 24VDC Ports on the Neptune Apex: This Energy Bar has a built-in 100W, 24VDC power supply that can control up to three Neptune Systems 1LINK products like the WAV and DOS. It also includes two switchable 24V DC on/off outlets that are compatible with any 24V device under 30W and Neptune Systems 24V accessories like our Practical Multi-purpose Utility Pump (PMUP).Individual Outlet Indicator LED: Each Energy Bar AC outlet as well as the two 24VDC accessory ports have their own status LED. This LED tells you when that outlet is energized. The LED will also blink rapidly if a device is plugged in that exceeds the current capability for that outlet.The Neptune Apex offers Alarms and Decisions based on Power: Since the Apex is receiving continual power usage data from the Energy Bar 832, it can be configured to send you notifications when a device is not using power as it should be. An example would be a return pump showing no power consumption when the outlet is on or a skimmer whose power consumption will show differently when its airline is clogged when compared to normal operation. These high and low limits are completed customizable by individual outlet. You can even use this power data to control other devices.All Outlets Relay Switched on the Apex EB832: Times have changed and it is fairly uncommon now for aquariums to have AC devices that must be cycled on and off continuously. This means that we could now switch all AC outlets to relay switching since there is no need to have soft start and there is no concern for the noise of the relay.
11 Total Connections Available on your Neptune Apex! 8 - 120V AC Outlets all switched with relays rated for millions of cycles3 - 1LINK 24VDC Smart outlets for devices such as WAV, DOS, etc. What is included in your Neptune Apex Box
1 - Neptune Apex Base System
1 - Energy Bar 832
1 - Temperature Probe - new design
1 - Double Junction pH Probe
3 - Built in FMM ports
1 - Optical Magnetic Sensor
1 - Solid Surface Leak Sensor (LD-2)
See images for product comparisons and what is included with the different models. Note: The display is NOT included with the Apex and Apex Jr A3 Systems. It is available for purchase separately.More useful information and videos on the Apex A3 Series
Neptune AquaBus Cable - 15 Foot Male/Male
Overview
15 Foot Male/Male Neptune Apex AquaBus cable.
Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.
Pinpoint AC Adapter
Overview
Fits any American Marine Pinpoint Monitor to eliminate power fluctuations caused by low batteries. Ensures stable accurate readings and pays for itself in months.
Hanna Marine pH Checker Reagent
Overview
The Hanna Instruments pH Checker Reagent is designed for use with the HI780 Marine pH Checker HC.
This high-quality reagent allows users to achieve fast and accurate measurements.
Each bottle will yield approximately 100 tests when used as directed with the Marine pH Checker HC.
Features
Prepared with high purity chemicals
Marked with expiration date and lot number for traceability
Yields approximately 100 tests
Designed for use with the HI780 Marine pH Checker HC
Pinpoint Calibration Thermometer
Overview
American Marine introduces the Pinpoint Calibration Thermometer, the only precise digital thermometer with large-range calibration and replaceable NIST-referenced probe. Superior accuracy provided by a waterproof thermistor fiber with triple mini-jack connection and 10 ft cable. Powered by two AAA batteries for up to 24 months of continuous use.
Features
Affordable accurate digital thermometer
Large-range calibration with user-replaceable probe
Lab-grade waterproof thermistor with 10 ft cable
Two AAA batteries for 18-24 months duty
Neptune Apex MXM Control Module
Overview
Bring the award-winning pumps and lights from EcoTech Marine and Aqua Illumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems Apex and Apex Fusion interface.
Expand Your Possibilities and Mix and Match your Favorite Equipment
Schedule Feeding
With the Apex, you can easily start a feed cycle for your fish and corals using a light pulse for your Vortechs, feed intensity for your Vectra, turning off your skimmer, and activating your AFS, all with a push of a button or at a scheduled time.
Water Change or Service
By pressing a button your Vectra will turn off, your Radion lights will go a bit more white to be able to see more clearly in your aquarium, and Vortechs will turn off.
Photo Mode
By pressing a button your Vectra will turn off, your Radion lights will go a bit more white to be able to see more clearly in your aquarium, and Vortechs will turn off.
Protect your Aquarium
Not only can you configure easy routines with your equipment, but you can also help protect your aquarium by configuring your devices to take special actions.
Temperature Monitoring
If your aquarium gets too warm, especially on hot days, you can lower the intensity of your lighting to help reduce the temperature.
ORP Monitoring
If your aquarium gets too warm, especially on hot days, you can lower the intensity of your lighting to help reduce the temperature.
Features
Wirelessly controls Mobius compatible EcoTech Radions, Vectras, and Vortechs
Wirelessly controls Mobius compatible AI Hydras, Primes, and Neros
A MXM has the ability to connect up to twenty-five different Mobius compatible devices per MXM
Additional MXMs can be utilized to connect more compatible devices
Two AquaBus connectors for flexible expansion via AquaBus and powered over AquaBus
Comes with 3' AquaBus cable
Fully upgradeable - MXM firmware and pump firmware can be updated for feature enhancement
LED Status indicator and wireless status indicator
Compatible with all A2 and A3 Apex Systems
Pinpoint ORP Probe Replacement
Overview
Replacement probe for Pinpoint ORP Monitor. Keep tip moist or rehydrate in water for 24 hrs if dry. Replace every two years or when readings fluctuate.
Features
Fast precise ORP measurement
Universal BNC connector
10 ft interference-suppressed cable
99.9% pure platinum electrode
Includes storage bottle
Red Sea Trace Colors Pro Test Kit
Overview
The Red Sea Trace-Colors Pro Multi Test Kit includes advanced tests for the high accuracy measurement of Iodine, Potassium and Iron.
Recommended for Ultra Low Nutrient Systems.
All of these elements are associated with many biological functions, including coral pigmentation.
The TRACE COLORS PRO Multi Test Kit enables accurate dosing of three of the TRACE COLORS Supplements range, which are part of the compete Red Sea Reef Care Program.
Specifications
Accuracy: 0.01ppmRange: 0-0.09ppmNumber of Tests: 50
Specifications
Accuracy: 3ppmRange: 150-450ppmNumber of Tests: 40
Specifications
Accuracy: 0.05ppmRange: 0-0.5ppmNumber of Tests: 50
Neptune ORP Probe
Overview
Neptune now offers both the ORP and pH probes in a double-junction construction for the Apex controller - these probes are built so they hold calibration longer and have a longer lifespan than single-junction probes.
Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into the electrolyte which changes the accuracy of the probe and requires more frequent calibrations.
Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second junction to contaminate the electrolyte surrounding the reference electrode.
These probes will not only work with your Neptune Apex but virtually any other controller or monitor that uses BNC connections.
Neptune FMM 24VDC 36W Power Supply
Overview
This 24VDC, 36W power supply is used with the FMM so that you can attach the powered accessories above like the PMUP or the Solenoid Valve.
This power supply is for 110V USA-style outlets.
Neptune DC24 to Bare Wire Cable - 10 Foot
Overview
The second cable is for the DIY folks out there.
This cable connects to the 24VDC accessory connections on the 1LINK.
This 10 foot cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W.
Examples might include a solenoid valve or a fan.
This accessory port can be switched on and off just like an EB8 outlet.
Red Sea Algae Control Multi Test Kit
Overview
The Red Sea Algae Control Pro Multi Test Kit is a high accuracy colorimetric comparator tests for the exceptionally high accuracy measurement of Nitrate and Phosphate. For all Reef Systems.
The nitrate & phosphate tests are essential for the accurate dosing of Red Sea's NO3 PO4- X (biological nitrate & phosphate reducer) which is part of the complete Red Sea Reef Care Program.
Specifications
Accuracy: 0.125ppmRange: 0 - 64ppmNumber of Tests: 100
Specifications
Accuracy: 0.02ppmRange: 0 - 5ppmNumber of Tests: 100
With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the optical water level sensor into a Sense Port on the Control 2 or Control 4 and adjust your settings in the HYDROS app. You can add additional HYDROS optical water level and/or mechanical float sensors to your ATO configuration for redundancy and to set high/low points.The HYDROS DC Micro Pump is powerful despite its small size. The pump measures 1.6" L x 1.062" W x 1.45" H. The pump has a maximum head pressure of 8'. The flow rate of the pump is 74 gallons per hour. This 12V brushless pump draws a maximum of 4.5W and has an average life expectancy of 30,000 hours (over 3 years). When connected to a Drive Port on the HYDROS Control 2 or Control 4 the controller will supply power to the pump, so no additional cords or power bricks are required for operation. Using a HYDROS aquarium controller for your auto top-off system is not only a reliable solution but it also helps clear wire clutter in and around your aquarium.The HYDROS DC Micro Pump is an official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of ATO systems in the aquarium hobby today. CoralVue has thoroughly tested the DC Micro Pump to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the pump so it connects with a Drive Port on the controller using an aviation-style plug for safer operation. No additional power source is needed to run the pump.HYDROS DC Micro Pump Specs: Size: 1.6" L x 1.062" W x 1.45" H Max Head: 8 Feet Power: 4.5W @ DC12V Style: DC Brushless Life: 30,000 hours (3+ years) The HYDROS DC Micro Pump uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle). Powered and controlled by plugging into a Drive Port on the HYDROS Control 2 or Control 4. No additional power cord is required. Manufactured by AutoAqua, an official HYDROS Technology Partner.
Neptune Flow Sensor - 1/4 Inch
Overview
The Neptune Systems FS-25 Flow Sensor is designed to be used with the Flow Monitoring Module (FMM).
Usually used with aquarium accessories like RODI inputs, calcium, reactor feed lines, etc., this flow sensor can be placed in line with the flow on 1/4" tubing, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.
The flow sensor itself uses push-fit connectors to make connecting to your system as simple as possible.
The FS-25 will work with flow rates from 3-12 gph.
Hydros System Command Bus Cable - 1 Foot
Overview
Short, tidy link cable for building a HYDROS Collective. The 5-pin Command Bus carries both data and power between HYDROS devices, enabling synchronized control and shared power where supported.
Features
Data + power bus for inter-controller communication
Ideal for side-by-side mounting with minimal slack
Robust 5-pin keyed connectors for secure connections
Engineered for HYDROS Collectives
Specifications
Length: 1 ft
Connectors: HYDROS 5-pin Command Bus (Data + Power)
UPC/EAN: 850009641441
Compatibility: HYDROS devices with Command Bus ports
Directions
Power down all connected HYDROS devices
Connect between Command Bus ports; hand-tighten threaded collars if present
Install Command Bus Terminators on any open ports as required
Restore power and confirm the Collective status in the HYDROS app
Hanna Ammonia Checker - Marine
Handheld Checker Marine Ammonia HI784
Overview
Ammonia is a by-product of the Nitrogen cycle. Ammonia is normally removed by nitrifying bacteria, but ammonia levels can rise if there is an imbalance in the tank water chemistry. Excessive ammonia in a marine aquarium increases the risk of inhabitant illness or death.
The HI784 Marine Ammonia Checker HC is a handheld colorimeter that uses the Beer-Lambert principle to determine the concentration of ammonia colorimetrically. The HI784 is designed specifically to measure ammonia levels in a saltwater aquarium. The 0.00 to 2.50 ppm range is ideal for coral/fish or fish-only aquarium maintenance.
Specifications
Range: 0.00 - 2.5ppm Ammonia
Resolution: 0.01 ppm (mg/L)
Accuracy:+/-0.05ppm +/- 5% of reading
Light Source: LED @ 610nm
Light Detector: Silicon Photocell
Method: Adaptation of the Salicylate Method. The reaction between Ammonia and Ammonium and the reagent causes a blue-green tint in the sample.
Operating Environment: 0-50 degrees Celsius, RH max 95% non-condensing
Battery Type: 1 - 1.5v AA
Auto-Shutoff: Automatically shuts off after 10 minutes of non-use.
Dimensions: 86.mm x 61mm x 37.5mm (3.4" x 2.4" x 1.5")
Weight: 64 grams (2.25oz)
Warranty: 6 month manufacturer limited warranty
AutoAqua Smart Stir
Overview
A magnetic stirrer for mixing water test reagents efficiently and effortlessly
Test Smart Way with
Water testing is critical and necessary for aquariums. However, it is annoying and time-consuming to mix different test kits one by one. Smart Stir is a small but clever labor and time-saving gadget to help you mix water test reagents with ease. Its strong motor and tiny magnetic stirring bar allow you to mix liquids completely and effortlessly in a moment. Just drop the magnetic stirring bar in the container, put it on the stir base, and press the power button, Smart Stir will do the annoying labor for you especially when you have to do several tests. It will stop automatically after five minutes in case you forget to turn it off. Make water testing easier, faster, and more effective!
Features
Compact and Compatible - Smart Stir's compact design not only saves space but is compatible with standard vials whose diameter is under 2.7 cm found in most water test kits.
Sustainable and Energy-Saving - Instead of replacing batteries, Smart Stir has a built-in rechargeable lithium battery which reduces the waste and cost of batteries. It will be turned off automatically after five minutes of operation to save power. The low battery indicator reminds users to charge it in time to get the best performance.
Elegant & Thoughtful - Smart Stir comes with not only an attractive and streamlined look but a thoughtful design. Its holder makes sure the vial stands firmly and the non-slip rubber pads on the bottom dampen vibrations during stirring.
SpecificationsModel: SS-100Charging: USB 5VCharging Time: 120 minutesDimensions: 2.77 x 2.77 x 2.34 inch (70.5 x 70.5 x 59.5 mm) Holder Size: 27 mm in Diameter1 Year manufacturers limited warrantyWhat's Included
Smart Stir Base
Micro USB Charging Cable
Iron Wire
Magnetic Stir Bar
HYDROS Control XP8 Energy Bar
Overview
The HYDROS Control XP8 is an eight outlet (120V AC) energy bar and controller hybrid specifically designed for equipment like heaters and return pumps which are critical to the life support of any aquarium system. Each of the individually controlled outlets is built into the HYDROS controller for the highest level of security. The Control XP8 has a built-in 60W universal voltage Meanwell power supply with a 14amp max power capacity and is designed to pass ETL/UL certification. Besides the clicking on and off of the controlled outlets, the XP8 is completely passively cooled and with its isolated power circuitry, the controller runs completely silent. Best of all, each of the eight outlets has individual power monitoring capabilities.
Besides being an overbuilt power strip, the Control XP8 is also a fully functioning HYDROS system controller capable of taking over intelligent decisions based on the status of other HYDROS Devices within the Collective. The two HYDROS Command Bus ports on the XP8 allow for a wired connection to any other HYDROS controller to form a collective of all Controls in one for the ultimate fail safe. system. Control and monitor your Control XP8 energy bar from anywhere in the world using the technologically advanced HYDROS cloud-based app. The Control XP8 also has the ability to monitor and control up to eight different HYDROS WiFi devices.
Features
Power up to 14 amps of system-critical life support equipment
The Control XP8 is a full brain that can share and take over the decision-making of a HYDROS Collective
Control up to 8 WiFi devices like fish feeders, smart outlets, and even additional WiFi power strips
Command Bus port provides power add redundancy power to your HYDROS Collective
Designed to pass ETL/UL Certification
Universal voltage works with both 110 and 220V
Built-in 60W Meanwell Power Supply
No noisy fans, the XP8 is completely passively cooled
Optical isolation between the power circuitry and the control circuitry. This provides safety failure, and it isolates the control circuitry to reduce noise.
Engineered, assembled, and supported in the USA.
Specifications
Max Per Relay: 8A
Total Max Amperage: 14A
8 - Controllable Power Outlets - Eight controllable AC power outlets each with individual power monitoring capabilities to safely manage aquarium equipment like heaters, lighting, water pumps, protein skimmers, filters, and pretty much anything else.
2 - Command Bus - The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe.
Up to 8 WiFi Devices - Connect up to 8 WiFi devices for added modular control on additional equipment like lights, pumps, feeders, and more by simply adding a HYDROS WiFi Power Strip or HYDROS Smart Plug (both sold separately).
1 Year manufacturers limited warranty
Please note this is the Energy Bar only. There is no controller included.
Neptune Trident NP Testing System with 2 month Reagent Kit
Overview
Imagine a world where manual nitrate and phosphate tests are no longer a part of your aquarium maintenance routine. Now you don't have to imagine!
The Trident NP is the latest innovation from Neptune Systems, designed to automate Nitrate and Phosphate testing with precision and ease. Building on the trusted reputation of the original Trident, the Trident NP offers high-frequency testing to ensure optimal water quality in your aquarium.
With seamless integration into the A2 and A3 Series Apex Controllers, the Trident NP brings consistent, automated measurement of nitrate and phosphate levels inside your aquarium so that you can make better decisions or even automate actions to maintain stability in your system.
Features
Easy Plug and Play Setup - From the box to testing in under 10 minutes! Just follow the step-by-step videos in the setup task.
Easy to Read Results and Graphs - The peace of mind of having your recent tank parameters, right there in your pocket, from anywhere in the world.
High/Low Alerts When Tank is Out of Range - Your Apex will alert you on your mobile device when test results fall out of the range you specify.
Reagents Store Neatly Inside the Trident
Test Nitrate and Phosphate Automatically Once Per Day
Compatible with A3 Apex (Apex Pro, Apex, Apex Jr.) or A2 Apex (Apex, Apex EL)
Designed and Assembled in the USA
Specifications
Requires: Neptune Systems A3 Apex (Apex Pro, Apex, Apex Jr.) or A2 Apex (Apex, Apex EL) Range: Nitrate: 0-100 ppm | Phosphate: 0-2.0 ppmAccuracy/Precision: Nitrate: +/- 1 PPM +/- 5% of reading | Phosphate: +/- 0.01 PPM, +/- 5% of readingTesting Interval: 1 Test Per Day (can initiate more tests per day by starting a test manually) Water Used Per Test: 30mlDimensions (approx.): 9.8" x 12.4" x 4.9"What's Included
Neptune Trident NP
2 Month Reagent Kit
1LINK Cable
Drip Tray
Hydros Control X2 Starter Pack
Overview
The HYDROS Control 2 Starter Pack is the first affordable and easy-to-use aquarium controller kit in the aquatic industry. This starter pack includes all essential equipment needed to monitor and control a healthy aquarium including a Control 2 device, HYDROS App, power source, temperature sensor, and 4-Outlet WiFi AC Power Strip. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists.
All HYDROS products are engineered, assembled, and supported in the USA.
What's Included
1x Control 2 Unit
1x Power Supply
1x Temperature Sensor
1x 4-Outlet WiFi AC Power Strip
HYDROS App
Hydros Control XS is Versatile and Expandable without Extra Modules
Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities.
Features
HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray.
What you can expect from your HYDROS Smart Device
Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app
Ability to monitor and control your HYDROS device(s) locally through WiFi
A fast dual-core 32-bit processor that allows control decisions to be made within each device
Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device
HYDROS Command Bus connections to transfer data and power to devices
Sense Port - 2 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors.
Hydros Controller Sense Ports currently supportTemperature probesOptical level sensors (single and dual) Capacitive non-contact liquid level sensorsRope leak detectorsPoint leak detectorsFlow rate sensorsMagnetic switchesPush-button switchesDrive Port - 2 AvailableThe Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified.
Accessories currently supported by Drive Ports include
Auto Top-Off (ATO) pumps
Cooling fans
Cabinet LED lights
Solenoids to control reverse osmosis systems
Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe.
Neptune Apex Probe Module 2
Neptune Probe Module 2 (PM2)
Overview
The PM2 probe module (shown above) , includes support for conductivity (salinity), temperature, and 6 digital inputs.
Features
Monitor/Control Conductivity, and temperature.
6 digital inputs for float switches, water on floor sensors, pressure sensors, etc.
Full data logging support in Apex Base module.
Up to 240 AquaBus modules can be added to the Apex system.
Plug and Play. Automatically recognized when installed into the system.
Two AquaBus connectors for flexible expansion via AquaBus.
Led Status Indicator.
Upgradeable firmware.
Compatible with Apex and Apex Lite systems.
Galvanic Isolation for accurate and reliable probe readings.
Comes with 3' AquaBus cable.
Aqueon 7-in-1 Aquarium Test Strips - 50 Pack
Overview
Aqueon 7-in-1 Aquarium Test Strips are an easy-to-use tool for monitoring water parameters in your aquarium. They provide accurate results for Total Alkalinity, Hardness, Nitrate, Nitrite, Free Chlorine, and Iron levels.
By regularly testing your aquarium water, you can ensure a healthy environment for your fish and other inhabitants. By using Aqueon 7-in-1 Aquarium Test Strips, you can easily identify imbalances or issues with water quality and take the necessary corrective actions. This may involve adjusting water chemistry, performing water changes, or upgrading filtration systems.
Regular testing with the Aqueon 7-in-1 Aquarium Test Strips is key to creating a healthy and thriving aquatic environment for your pets!
Features
All-in-one testing to check pH, Total Alkalinity, Hardness, Nitrate, Nitrite, Free Chlorine, and Iron levels to protect fish
Fast and easy with results in 30 seconds
Identifies imbalances or issues with water quality, allowing for necessary corrective actions
Regular testing ensures a healthy environment for your fish and other inhabitants
Simply dip the strip into water, remove and wait, and compare the color-coded results to the chart for parameter concentration levels
Depending on the results, appropriate interventions such as water changes, adding chemical water adjusters, or changing filter media can be made to the aquarium
For use with both freshwater and saltwater aquariums
Hygger Hydrometer
Overview
The Hygger aquarium hydrometer is accurate and reliable aquarium salinity tester.
It delivers precise full-range salinity and specific gravity readings. This also includes a built-in base so you can rest the hydrometer on a counter top or other flat surface when taking salt readings.
The salinity tester is best used with brackish and marine aquariums. and includes specific gravity and salinity PPT Scales
The hydrometer supplies an optimal specific gravity/salinity range indicator and a bubble diffuser on water intake prevents micro-bubbles from forming on the needle.
The salinity tester is made of transparent acrylic material, which is relatively hard and easy to read. Easy-to-Read Marine Hydrometer.
Specifications
Temperature-corrected and accurate to +/-0.001.
Specific Gravity Range: 1. 000-1. 030 (ppt value: 0-43.9 degrees)
Safe Area for Marine Aquariums: 1.020-1.023 (ppt value: 30.2-34.2 degrees)
Low Specific Gravity Area 1.000-1.019 (ppt value: 0- 28.9 degrees)
Higher Specific Gravity Area 1.024-1.030 (ppt value: 35.5-43.9 degrees).
Using
Insert the hydrometer into the tank or the fish pond until the plate spills. (slowly filling to prevent bubbles from attached to the pointer)
When the hydrometer is full, take out the hydrometer and place it on a horizontal surface.
Read the specific gravity according to the inner scale, and read out the salinity (PPT) according to the outside scale.
Rinse with clean freshwater after each use.
Hydros Command Bus Terminator
Overview
Essential accessory for reliable HYDROS Collectives. The Command Bus Terminator properly closes the communication bus to prevent signal reflections and maintain strong, error-free data between HYDROS devices.
Features
Ensures correct impedance and stable communication on the Command Bus
Simple, tool-free installation on an open Command Bus port
Compact form factor fits tight control boards and cabinets
Often included integrated on certain HYDROS power supplies; add where ports remain open
Specifications
Model: HDRS-CBC-TM
UPC/EAN: 850009641335
Use: Terminate open Command Bus ports in a HYDROS Collective
Compatibility: All HYDROS devices with Command Bus ports
Directions
Power down the Collective
Insert the Terminator into an open Command Bus port and hand-tighten if threaded
Ensure all required ports are terminated to complete the bus
Restore power and confirm stable device communication
Hanna Marine Multiparameter Photometer
HI97115 Marine Master Bluetooth Photometer accuracy and ease use in a simple, portable design.
Overview
The HI97115 is a compact and versatile Marine multiparameter photometer designed to accurately determine pH, Alkalinity, Ammonia, Calcium, Magnesium, Nitrate, Nitrite, and Phosphate levels in aquariums and marine biology applications.
The HI97115 is suitable for field and bench measurements. The HI97115 can be used as a stand-alone photometer or can be connected to the Hanna Lab App with a compatible smart device via the integrated Bluetooth module.
When connected, Hanna Lab App functions include measurement with the ability to add notes, data logging with extended storage capacity, data sharing, and the ability to create and save method groups.
No warm up time needed before taking a measurement.
Tutorial mode for easy step-by-step instructions.
CAL Check for performance verification and calibration.
Features
Let your photometer guide you through setup, calibration, and testing with on-screen tutorials and animations so you always know the next step. Simply access Tutorial Mode at any stage in the setup or measurement process with the dedicated help key.
The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Hanna Lab App
When the photometer is paired with a compatible smart device, the Hanna Lab App adds an enhanced user experience to the HI97115. Features include: measurement with the ability add notes, data logging with extended storage capacity, data sharing, and the ability to create and save method groups.
Aquarium Data Logging
Missed a measurementNo need to worry because your photometer will automatically log the last 50 measurements. The results can be viewed instantly using the Log Recall Menu.
CAL Check Validation
Hanna's exclusive CAL Check feature provides a stress-free, straightforward way to ensure your photometer is working properly. Simply insert the certified CAL Check standards and let your meter guide you through validation. If your photometer is out of specification for any reason, simply calibrate to your standard.
Advanced Optical System
A Light Emitting Diode (LED) provides more light while using less power and a narrow band interference filter results in more accurate and repeatable readings.
Hanna Testers are Built Better
Designed to withstand the knocks, drops, and spills of real life, the new IP67 body ensures top performance in any environment. Internal optics are sealed from outside dust, dirt, and water. In addition, it floats, just in case you drop your meter in water. This photometer uses an exclusive positive-locking system to ensure that the cuvettes are placed into the holder in the same position for accurate readings every time.
Portable Design from Hanna Testers
Made to fit comfortably in your hand for on-the-go testing or sit on a table for bench top use, a backlit LCD display provides at-a-glance readings from any angle, day or night. The supplied AA batteries provide life for more than 800 measurements.
What's Included
Sample cuvette (2 pcs.)
Sample cuvette cap (2 pcs.)
Marine pH reagent, 30 mL dropper (1 pc.) (reagent for approx 100 tests)
Marine Alkalinity reagent, 30 mL (1 pc.) (reagent for approx. 25 tests)
Marine Calcium reagent A, 30 mL (1 pc.)
Marine Calcium reagent B starter kit (reagent for 25 tests)
Marine Nitrate High Range starter kit (reagent for 25 tests)
Marine Nitrite Ultra Low Range starter kit (reagent for 25 tests)
Marine Phosphate Ultra Low Range starter kit (reagent for 25 tests)
10 mL syringe with Luer Lock
Filter Holder with Luer Lock
16 guage blunt needle (6 pcs).)
1.5V AA Alkaline batteries (3 pcs.)
Filter Disc (25 pcs)
Instrument quality certificate
Instruction manual
See downloads tab for product specifications and manual.
AutoAqua Smart Doser 2
Overview
The AutoAqua Smart Doser offers an ultra compact design with intuitive aquaLine App for controlling your Smart Doser from anywhere in the world! Intuitive and intelligent programming allows you to easily set your daily dosing schedule.
The AutoAqua Smart Doser offers a fully automated and easy to set dosing program, which meets even the most demanding applications. Operating through the aquaLine app, the full suite features simplify every dosing routine. Smart Doser has all the great features to make it an awesome dosing device!
Features
STYLE MEETS SUBSTANCE - Exclusive Hang-On-Back Design allows for convenient and flexible installation, especially small and AIO tank. For larger aquariums, the wall-mount bracket works equally well. Unique plug & play design for no complex tools or procedures!
PATENTED EMPTY MONITOR -Patented optical sensor detects when the supplement bottle is empty and sends an instant alarm. Helping to eliminate fluctuations in your dosing regimen.
INCREDIBLY SLIM DESIGN - With industrial-level gear motor, Smart Doser features a stunning design in an incredibly thin (35mm / 1.4") and light-weight body. The compact size allow you to easily install the doser just about anywhere.
IMPRESSIVE STYLISH DESIGN - Combined with the amazing performance of high-tech touch buttons, attractive indicator LEDs, and brilliant 1/4" push-to-connect fittings, Smart Doser takes everything people love to an entirely new level.
INTUITIVE SETTING INTERFACE - With programming through user friendly aquaLine App, you can easily operate your Smart Doser for various functions and receive instant alarm in every emergency scenario.
WIFI & BLUETOOTH DUAL CONNECTIVITY - Features with intelligent dual connectivity, providing super fast installation and ensuring that you stay connected wherever you are.
Features
Easy-set dosing for Automatic Mode & Manual Mode - Accurate dosing without the hassle of program setting. The Automatic Mode allows user create a program of specific dosing volumes and time period, which automatically distributing dosing time evenly to avoid supplement interference. No more complicated setup and calculation! All programs can be set to run everydayGet rid of Time Allotment and Dosing Overlapping2 Operational Modes : Auto and Manual3 Daily Dose Schedule : day time, night time, 24 hoursVolume dosing will be carried over a specified time periodGrouping Allows Multiple Devices to be Controlled Simultaneously - Ingenious and powerful Cloud system allows integrating multi devices into an unite schedule with no any dosing overlap for a high efficient presetting program. Control the devices simultaneously under same groupConnecting up to 8 pumps for various dosing scenario of Smart DoserMulti-Schedule Management by AWS Cloud SystemFeed Mode - Suspending dosing during coral feeding.Calibration - Calibration with time compensation.Power Outage & Restoration - Keeps setting by powerful memory allocation without battery necessary.Intuitive Interface - Smashing user experience by simple interface.Peace of Mind - Receive instant notifications to any problem monitored by aquaLine, ensuring smooth dosing routine.Specifications
Power:- Input : 100-240 VAC 50-60 Hz - Output : 12 VDC / 1 A - Cable Length : 6 feet (180 cm)Slim Gear Peristaltic Pump: - Power : 2 W @ 12 VDC - Suction Head : 20 feet (610 cm) - Max. Flow : 21 ml/min - Accuracy : +/- 2%1/4-inch Flexible Tubing:- Length : 9.8 feet (300 cm) - Size : ID 5/32 inch (4 mm), OD 1/4 inch (6.4 mm)Max. Mounting Thickness via Hanging Bracket: 3/4 inch (19 mm)Dimensions: (L x H x W) : 5.6 inch x 3.2 inch x 1.4 inch (143 mm x 82 mm x 35 mm)What's Included
Smart Doser 2
Universal Power Adapter
Wall-Mount Bracket
Hanging Bracket
Calibration Cylinder
Tube Clip
2 x 1/4" Quick-Connect Elbows
2 x Mounting Screws
2 x 300cm (9.84 feet) Tubing (Blue / Green)
Hydros Triple Optical Level Sensor
Overview
The Triple Optical Water Level Sensor plugs directly into a Sense Port on a HYDROS device and does not require an additional power source.
3 Water Level Sensors Added Redundancy
The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control XS, X2, X4, X10, etc.) and does not require any additional power source. The HYDROS Water Level Sensor contains no moving parts that can fail. The optical eye is magnetically coupled with the magnet side measuring only 1/4" thick. It can be mounted to most clear, tinted, or painted surfaces up to 1/2" thick. The sensor operates in the daytime or complete darkness so it's safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium. The sensors are easy to place, easy to move, and easy to clean.
Specifications
Diameter: 0.75"
Sensor: 0.75" thick
Magnet Mount: 0.25" thick
Cord length: 75"
Max Mounting Thickness: 1/2"
For freshwater and saltwater aquariums
The HYDROS Water Level Sensor uses a GX12 aviation-style connector so that the Control can maintain its IP65 rating (dust-tight and protected from water spray at any angle).
When the water level in the sump or aquarium drops below theLOW LEVEL (3) on the sensor, it will fill the water till it reachesNORMAL LEVEL (2)SAFETY LEVEL SENSOR (1) is a backup to shut down the feed pump in case of a malfunction; in this case, an alarm can be triggered.
The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump.The way it works is easy: just place the sensor inside any protein skimmer collection cup up to 1/4" thick. There is a magnetic coupling that will sit on the outside of the skimmer cup to keep the sensor securely in place. Once the waste level in the collection cup rises to the point it makes contact with the sensor, it will tell HYDROS to turn the protein skimmer off to prevent overflowing. Your protein skimmer must be plugged into a HYDROS power source, like the Power 4 power strip or Smart Plug, for this sort of skimmer security to operate.The HYDROS Skimmer Sensor plugs into any HYDROS Sense Port and does not require any additional power supply. The optical eye on this sensor is designed to be used inside the collection cup of a protein skimmer, so it's a little different than a standard water level sensor - but purpose-built for this specific and important application. The sensor contains no moving parts that can fail. It's extremely tiny: it's a little over a half-inch thick with a circumference the size of a US penny. The optical eye is magnetically coupled with the magnet side measuring only 1/4" thick. The cord is on the magnet side so installation is easy. You don't need to purchase a new lid for your skimmer or modify the collection cup in any way.The HYDROS Skimmer Sensor is an Official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of aquarium automation systems in the hobby today. CoralVue has thoroughly tested the Skimmer Sensor to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the sensor so it connects with any HYDROS Sense Port using its aviation-style plug for safe operation. No additional power source is needed to run the sensor. Keep skimmate in the cup and not in the sump with the HYDROS Skimmer Sensor.HYDROS Water Level Sensor Specs Size: Diameter - 0.75" Sensor - 0.55" thick Magnet Mount - 0.25" thick Max Mounting Thickness: 1/4" No Moving Parts Magnetic Attachment Purpose-built to be placed inside the collection cup of a protein skimmer. Attaches to any protein skimmer collection cup: you don't need to purchase a new lid or modify your collection cup for it to work. The HYDROS Skimmer Sensor uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle). Powered, monitored, and controlled by plugging into a Sense Port on the HYDROS Control 2 or Control 4. No additional power cord is required. Manufactured by AutoAqua, an official HYDROS Technology Partner.
Red Sea Nitrate Pro Test Kit
Overview
Red Sea's Nitrate Pro Reef Test Kit is an advanced colorimetric test with comparator, measuring the level of nitrate in your reef aquarium to an exceptionally high accuracy of 0.12ppm NO3.
The Nitrate Pro Reef Test Kit , when used in conjunction with the Phosphate Reef Pro Kit, enables accurate dosing of Red Sea's NO3:PO4- X (biological nitrate and phosphate reducer) which is part of the complete Red Sea Reef Care Program.
Specifications
Accuracy: 0.125ppmRange: 0-64ppmNumber of Tests: 100
The HYDROS DC Solenoid Valve is a handy HYDROS Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow. You can connect the solenoid to your reverse osmosis filter and use it to top-off your tank if you don't have the room available for a separate ATO reservoir.The HYDROS DC Solenoid Valve works in conjunction with a HYDROS aquarium controller and an optical or mechanical water level sensor. When the sensor detects the water level is low, it opens the valve to allow fresh RO or RO/DI water to flow through and top-off your tank or sump. When the sensor senses that the water level is replenished, it will tell the Control 2 or Control 4 to shut off power to the solenoid. This closes the valve to stop the flow of reverse osmosis water. The HYDROS DC Solenoid Valve should be connected to the product line coming off your reverse osmosis system. It has 1/4" push-connect fittings to insert standard RO tubing quickly and easily.Instead of using the HYDROS DC Micro Pump as your ATO pump, you can use the HYDROS DC Solenoid Valve instead. Just plug it into a Drive Port on the Control 2 or Control 4 for power and control and configure in the HYDROS app. It is recommended to install an auto-shutoff valve and check valve on your reverse osmosis system to prevent it from producing wastewater when the solenoid is closed.The HYDROS DC Solenoid Valve is an Official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of ATO systems in the aquarium hobby today. CoralVue has thoroughly tested the DC Solenoid Valve to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the solenoid so it connects with a Drive Port on the controller using an aviation-style plug for safer operation. No additional power source is needed to run the solenoid.HYDROS DC Solenoid Valve Specs Max Pressure: 120 PSI The HYDROS DC Solenoid Valve uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle). Powered and controlled by plugging into a Drive Port on the HYDROS Control 2 or Control 4. No additional power cord is required. Manufactured by AutoAqua, an official HYDROS Technology Partner.
Hydros Sense Port Extension Cable - 9 Foot
Overview
Give your HYDROS sensors the extra reach they need. This 9 ft GX12-4 (4-pin) Sense Port extension lets you keep controllers high and dry while placing sensors exactly where they work best.
Features
Purpose-built 4-pin Sense extension for HYDROS accessories
Nine feet of added length for flexible, safer cable runs
Threaded aviation connector resists vibration and accidental loosening
Compatible with all HYDROS Sense Port accessories
Specifications
Length: 9 ft
Connectors: GX12-4 (Sense Port), male to female
UPC/EAN: 850009641236
Compatibility: HYDROS sensors and accessories using Sense Ports
Directions
Disconnect power from the controller
Thread the GX12 connectors securely; do not cross-thread
Route cables with drip loops and away from heat/salt spray
Power on and confirm each sensor reads correctly in the HYDROS app
Neptune AquaBus Extension Cable - 15 Foot Female/Male
Overview
An extension cable for your AquaBus system that allows you to extend the reach by 15 feet.
One end is male, and one end is female.
Designed for use with all Neptune Apex Systems.
🚨 CANADA POST STRIKE🚨 Due to the strike, we are UNABLE to ship Livestock and Frozen food orders by UPS Express because of the increased volume on their system. Once the strike has ended, regular service will be resumed.
