Controllers & Monitors

Pinpoint pH Calibration Solution 7.0 High precision calibration solution designed for any type of pH monitor.Ensure that you warm the solution to aquarium temperature before calibrating!Comes in an easy to use disposable pouch. Simply cut the corner off and use!One time use only.J&L Aquatics recommends that you calibrate your monitors at least once every 90 days to ensure accuracy.

Read more less

Pinpoint pH Calibration Solution 10.0 High precision calibration solution designed for any type of pH monitor.Ensure that you warm the solution to aquarium temperature before calibrating!Comes in an easy to use disposable pouch. Simply cut the corner off and use!One time use only.J&L Aquatics recommends that you calibrate your monitors at least once every 90 days to ensure accuracy.

Read more less

Neptune Systems Trident Reagent 6 A six month reagent kit for the Neptune Trident water analyzing system. The cost of reagents and recurring cost is a valid concern for a hobbyist considering the test kit or automated system - and we designed the Trident with that in mind - keeping those costs as low as possible.Reagent comes in 2-month kits (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day). These kits include two bottles of Reagent A (changed every month), one each of Reagent B and C (changed every two months), and one bottle of our calibration seawater sample.The reagent kit has at least 240 alkalinity tests and 120 tests each of Calcium and Magnesium.The 6 month kit contains 3 x 2 month kits

Read more less

Pinpoint pH Calibration Solution 4.0 High precision calibration solution designed for any type of pH monitor.Ensure that you warm the solution to aquarium temperature before calibrating!Comes in an easy to use disposable pouch. Simply cut the corner off and use!One time use only.J&L Aquatics recommends that you calibrate your monitors at least once every 90 days to ensure accuracy.

Read more less

Pinpoint pH Probe Replacement Easily fits into the PinPoint pH Monitor.Ensure that you keep the tip of the probe always moist. Do not let it dry out!J&L Aquatics recommends that you replace your pH probe approximately every two years or when your pH readings fluctuate after calibration. Features of the Pinpoint pH Probe Fast and precise pH measurement for the entire range of pH from 0.00 to 14.00 10-foot cable is high suppression jacket to shield from electrical interference Universal BNC connector - fits almost every controller including Neptune, Hydros, Milwaukee, etc. Fully submersible/waterproof Body contains a fully sealed reference with double external reference junctions Extra internal fill means maximum probe life Maintenance free

Read more less

Pinpoint ORP Calibration Solution The PinPoint ORP / REDOX Calibration Fluid 400 mV is convenient and easy to use: no mixing is required and highly accurate.Packaged in single--use plastic foil pouches similar to PinPoint pH calibration fluids.For best results, recalibrate the ORP monitor/controller monthly.

Read more less

This package includes 3 Seneye slides giving you three months of Seneye+The Seneye+ includes the disposable Seneye slide, e-mail alerts, automatic online graphing, and personalized advice.Activating your Seneye+ is really easy and the disposable slide removes the need for recalibration (and the cost of recalibration fluids/buffers etc.) and better still it improves accuracy.Features Monitor the invisible killers in your aquarium - The highly accurate disposable Seneye slide ensures there is no calibration of the device needed, simply replace each month for accurate and reliable readings.Your replacement slide allows for the monitoring of free ammonia and pH. The free ammonia (NH3) sensor allows for detection of this highly toxic chemical at very low levels. The pH sensor allows for monitoring of your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved. Early warning, intelligent software predicts future water conditions - The intelligent software in the Seneye system monitors all the readings as they are delivered and using our sophisticated algorithm your levels will be predicted based on your previous readings, type of environment and the volume of water. Graphing you can see around the world - With the Seneye+ your data is automatically graphed for you allowing you to instantly see any developing trends. You can access results from your seneye.me account worldwide, the reasons are stored online for easy viewing. Convenient alerts sent to e-mail and mobile phone - Automatic alerts when your levels increase or decrease can be sent to your e-mail address or optionally to your mobile phone via SMS* messages. (SMS alerts may not be available in all countries) Soak slide for 24 hours - Remember to always soak your Seneye slide for a minimum for 24 hours before using it. Take a glass of water from your aquarium or pond and place the slide in. Soaking allows the sensor pad time to stabilize so accurate readings can be taken. * The Seneye+ has a recommended use by date of 12 months from date of manufacture, always store in a cool dry dark place.

Read more less

Neptune Trident Reagent 2 A two month reagent kit for the Neptune Trident water analyzing system. The cost of reagents and recurring cost is a valid concern for a hobbyist considering the test kit or automated system - and we designed the Trident with that in mind - keeping those costs as low as possible.Reagent comes in 2-month kits (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day). These kits include two bottles of Reagent A (changed every month), one each of Reagent B and C (changed every two months), and one bottle of our calibration seawater sample.The reagent kit has at least 240 alkalinity tests and 120 tests each of Calcium and Magnesium.

Read more less

Pinpoint ORP Calibration Solution The PinPoint ORP / REDOX Calibration Fluid 400 mV is convenient and easy to use: no mixing is required and highly accurate.Packaged in single--use plastic foil pouches similar to PinPoint pH calibration fluids.For best results, recalibrate the ORP monitor/controller monthly.

Read more less

Neptune Trident Testing System The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium - and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with the DOS (available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels. How the Neptune Trident Works The Trident is a self contained automatic titration colorimeter. That's quite a mouthful, for sure, so let's state it as simply as we can. The Trident is basically automating what you (and top scientists) do already when you test your water, that is, perform a color changing titration and interpret the results. On a scheduled basis the Trident carefully mixes its reagents with a small amount of sample water from your aquarium. While doing this, it is measuring (titrating with a precision peristaltic pump) the amounts of each that are necessary to reach an expected color change (determined by the electronic colorimeter). When it finishes the titration, it sends this sample/reagent fluid to your waste container. It then interprets the results of that test and logs the value into your Apex.Easy Plug and Play Set-upFrom the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app - it holds your hand through the installation with helpful videos along the way.Consistency and Precision, Test after TestThe Trident tests with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. This is better than humans can do consistently with every hobby-grade test kit on the market.Understand Your Aquarium Like Never BeforeWhen you start getting the regular data coming in from the Trident you will be amazed at the things you can see happening. The daily light cycle swing on calcium carbonate uptake. A salinity drop by watching magnesium. An out of sync dosing of calcium. This increased understanding ultimately helps you maintain a better, more successful reef.Out of Range Actions and AlertsYou can set up your Apex to alert you, or take immediate action(s) when a parameter falls outside of the safe zone you specify. As just one example, you might be dosing an Alkalinity solution and a misconfiguration could lead to overdosing of your tank. The Trident will catch that, alert you, and give you more time to make that correction before its too late and to save your aquarium. The data from the Trident can also be used to turn on and off other devices (like dosers or solenoids) to protect your tank even more.Automatic Dosing and Control - Ultimate StabilityThe more stable you maintain proper levels of Alkalinity, Calcium, and Magnesium, the better your corals will grow and thrive. But coral uptake of these supplements often changes and requires us not only to perform more testing, but also seems to put us in a never-ending state of adjusting our dosing levels.The Trident, when paired up with one or more of our DOS systems solves this problem with Automatic Dosing Control (ADC)When configured on the Apex, ADC will take the results it receives from the Trident and use them to gradually turn up or down the amount of additive your DOS delivers. But, don't worry, we have built this feature with safety in mind. With ADC you set your target value and your starting dosing amount and ADC will only tune that dosing level +/-35%. If it takes more than that amount of dosing to keep your aquarium at your target value, then the Apex will stop ADC, revert to your starting dosing amount, and alert you that you need to manually adjust your dosing level. Then, ADC can be re-enabled and it will continue to guide your DOS so that it keeps you as close to your target value as possible.It is possible to use ADC for all three tests - Alkalinity, Calcium, and Magnesium. You can also use one test value to adjust up or down more than one additive delivered by the DOS (i.e. Triton system).Simple Infrequent Reagent ChangesWhen using the default testing schedule of four (4) alkalinity, two (2) calcium, and two (2) magnesium tests a day, the reagent stored inside the Apex will last a full month. And adding new reagent is super simple - just slide out the drawer, remove the old bottle(s), and replace them with new ones. If you desire, you can also run a calibration with the included calibration standard. Highlighted Features of the Neptune Trident Automatically tests seawater for Alkalinity, Calcium, and Magnesium Up to 24 Alkalinity tests per day with +/-.05 dKh precision Up to 12 Calcium tests per day with +/-15 ppm precision Up to 12 Magnesium tests per day with +/-15 ppm precision ~7.9ml sample water used per parameter tested ~7 minutes testing time per parameter tested Up to one month of testing before reagents need changing based on base level testing of 4-Alk, 2-Ca, 2-Mg per day. When combined with DOS system (available separately), the data from Trident can be used to automatically raise or lower the amount of additives dosed as necessary to maintain stability at user set point. What the Neptune Trident Water Tester Requires Apex or ApexEL (not Apex Classic, Lite, or Jr.) Available 1Link port OR 24v power supply and Aquabus Cable (available separately) External waste container or drain Must be located within 4' of water source to be tested What's Included with your Neptune Trident Trident 1Link cable (US/CAN only) 5' of black sample line tubing 5' of clear waste line tubing 1-month reagent supply Calibration Fluid Get Started Card

Read more less

Neptune Apex 24VDC Solenoid Valve This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4" tubing.The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar 832 products.Common uses include safety stops for RODI systems, CO2 systems on calcium reactors, and many other places where you want to control the on/off flow of freshwater (it is not meant for use with saltwater), air, or other gasses.This solenoid valve can also be used with our standalone 24VDC power supply (not included) if you do not own one of the above products and want to use this solenoid valve with your Energy Bar 8 or Energy Bar 4.

Read more less

Pinpoint pH Monitor The PINPOINT pH Monitor is in use by thousands of customers worldwide. This affordable unit remains the only full-time pH monitor with .01 resolution. The PINPOINT pH Monitor is sold complete with probe and calibration fluids (9 volt battery not included). The electrode is also available separately and fits any meter, monitor or computer controller. Features of the American Marine Pinpoint pH Monitor Digital pH display with an accuracy to 1/100th of a pH unit Displays pH either "on demand" or as a "continuous monitor" Easy access front adjustments for both slope and calibration Complete with blue epoxy electrode (10' cord) Includes High Precision Calibration Fluids 9 volt battery or AC operation (with optional AC adapter kit) Battery or power supply not included.

Read more less

Pinpoint ORP Monitor PINPOINT ORP Monitor will measure the ORP (oxidation-reduction potential, or REDOX) of your system. It is popular with those who use ozone gas or potassium permanganate as an artificial oxidation agent in fresh or saltwater.Constant monitoring of the ORP is useful in keeping tabs on the overall health of a system, as a drop in ORP often precedes visual or other indications of trouble. Many serious marine enthusiasts who do not use ozone gas use this meter to judge the overall health of their reef systems. This unit features a 1mV digital resolution and a platinum electrode.Comes complete with meter and probe.

Read more less

Seneye Reef Monitor Are your corals not as vibrant as you expect? Have you ever had an aquarium crash unexpectedly? Now with the Seneye Reef you can continuously monitor and analyze key life-critical parameters in your saltwater aquarium to ensure that your corals and fish thrive.You can automatically receive alerts before conditions become toxic, giving you time to fix the problem without losing your fish.The integrated PAR, LUX, and Kelvin meter allows you to ensure that your lighting conditions are optimal, so your corals thrive and appear vivid. As the Seneye devices are USB there are multiple connection options available. When connected to the Power Adapter readings are stored every hour and flashing lights on the device indicate if there is a problem. Readings are stored for 35 days and are automatically uploaded once reconnected to a PC.The Seneye Reef is also great for planted aquarium keepers! The light meter can help ensure the plants are getting the correct quantity and quality of light. Features of the Seneye Reef Automatically monitors multiple key parameters Constantly watching your aquarium, 5600 readings per month Healthier coral, integrated LUX, Kelvin and PAR light meter Early warning, intelligent software predicts future water conditions* Convenient alerts sent to e-mail and mobile phone* Access results worldwide, data stored on line for easy viewing* Track your results with automatic graphing* USB connection with multiple connection options, including optional USB power adapter *some features require Seneye+ What the Seneye Reef Monitors Temperature: Constantly monitors water temperature, so you can get an alert if your heater breaks or your chiller fails Free Ammonia: Monitors the highly toxic free ammonia (NH3) at very low levels, so you can stop your fish from dying from Ammonia poisoning. pH: The Seneye monitors pH in your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by focusing on this range increased accuracy has be achieved. Water Level: Readings are only taken when the Seneye device is in water, no false readings. LUX: Monitors ambient LUX and can be used to take direct LUX readings, understand how your light degrade over time. Kelvin: Understand where on the kelvin range your lights are and how light can change over time. PAR: Monitor the Photosynthetically Active Radiation (PAR), understand if you have the correct quantity and quality of light for your corals or plants.

Read more less

ABC Reagents for Automatic Testers Reagent solutions for the analysis of alkalinity, calcium, and magnesium levels. It can be used to manually test levels of kH, Ca, and Mg of aquarium water. Available in two, four, and six months supply packs. 6 Month* Supply of Reagents Includes 6 A (Alkalinity) Reagent - 250ml Bottles 3 B (Ca/Mg) Reagent - 250ml Bottle 3 C (Ca/Mg) Reagent - 250ml Bottle *Monthly supply based on common testing frequencies of automated systems. Automated Testing System Instructions The Reagents Will Need to Be Calibrated if Using an Automated Testing System.Pour ABC Reagents into your automated testing system's containers (new containers not included), then proceed with the calibration procedure of your choice.Please Note: The calibration solution is NOT SUPPLIED since the value of accuracy is dependent on what the user determines is the best standard of accuracy.Users can perform manual tests of given aquarium water using their trusted test kits. Then calibrate using those values. Example home test kits include but are not limited to Salifert, Red Sea, API, etc.

Read more less

Neptune Apex Energy Bar 832 (EB832) A great aquarium just got easier! Energy Bar 832 - The Ultimate Power Control Hub! This Energy Bar 832 was redesigned from the ground up. Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports. Each individual outlet has power monitoring and there are individual LED indicators for each outlet. Read on and watch the videos for more info. Power Monitoring: For years we have been asked to do the power monitoring of the individual devices connected to each outlet - but it just wasn't possible without breaking your bank. Now it's here and with comes tons of benefits.For many the cost of the electricity to run a successful aquarium is a major concern in their household. Even for those where electricity is cheap, we believe most aquarists care a great deal about their energy consumption and its effect on the environment. Ironically, our energy usage could be directly connected to excess greenhouse gasses, the warming of the oceans, and the bleaching of the corals!However, armed with the right information we believe aquarists will not only be able to make operating and purchase decisions that will save them hundreds of dollars a year, but they will also be able to reduce their carbon footprint. Built-In 1Link and 24VDC Ports: This Energy Bar has a built-in 100W, 24VDC power supply that can control up to three Neptune Systems 1LINK products like the WAV and DOS. It also includes two switchable 24V DC on/off outlets that are compatible with any 24V device under 30W and Neptune Systems 24V accessories like our Practical Multi-purpose Utility Pump (PMUP). Individual Outlet Indicator LED: Each Energy Bar AC outlet as well as the two 24VDC accessory ports have their own status LED. This LED tells you when that outlet is energized. The LED will also blink rapidly if a device is plugged in that exceeds the current capability for that outlet. Alarms and Decisions based on Power: Since the Apex is receiving continual power usage data from the Energy Bar 832, it can be configured to send you notifications when a device is not using power as it should be. An example would be a return pump showing no power consumption when the outlet is on or a skimmer whose power consumption will show differently when its airline is clogged when compared to normal operation. These high and low limits are completed customizable by individual outlet. You can even use this power data to control other devices. All Outlets Relay Switched: Times have changed and it is fairly uncommon now for aquariums to have AC devices that must be cycled on and off continuously. This means that we could now switch all AC outlets to relay switching since there is no need to have soft start and there is no concern for the noise of the relay. Please note: The EB 832 is not backward compatible with the Classic Apex, or the Apex Junior controllers!

Read more less

Neptune Apex FMM (Flow Monitoring Module) The FMM (Fluid Monitoring Module) from Neptune is a multi-purpose module that, with the help of various accessories, enables your Apex to do: Flow Monitoring Leak Detection Water Level Detection Power 24VDC accessories Future sensors Neptune Apex FMM Flow Sensors Return Pump: Measuring the flow of your aquarium's main return pump is an incredibly useful piece of information. The key benefit would be to have the Apex notify you the instant the flow stops for any reason - usually the result of a failed or faulty pump. Furthermore, an indication of a reduced flow rate could be used to determine that the pump or the lines are dirty or are becoming clogged with algae, debris, animals, or the growth of organisms inside your plumbing. Auxiliary pumps on reactors and the like: This is a very handy application for the FMM. Place a flow sensor on a device like a carbon/gfo/biopellet reactor and it serves many purposes. First off, you will know if your pump is not flowing correctly or failed altogether. Next, you can easily fine-tune the flow into the reactor by watching the dashboard tile on your Apex. Finally, you can know when the reactor is becoming clogged with detritus or possibly channeling has occurred by an alert on your Apex or by monitoring your dashboard.Put a flow sensor inline to your device, plug it in to the FMM, and see exactly the flow rate of the water (any aquarium fluid really) going through that sensor. The industrial-grade flow sensors use either a turbine or paddle- wheel mechanism (depending on the model) to measure the flow.It is important to note that the flow rate that will be reported back to you from the flow sensors will likely be far lower than you expect or what is printed on the pump label or documentation. This is due to head pressure loss from physical height differences, long runs, restrictions such as ball valves, fittings like elbows, tees, and reducers, and then finally the loc-line many use as the entry point into their tanks. As an example, a pump rated at 3200gph will likely be showing less than half that amount in nearly all applications. Four Ports: The FMK comes with three flow sensors but the FMM has a total of four ports. This means you have one port free to use for another purpose. Buy additional flow sensors (available also in 2" and 1/4" sizes) or choose from other options available and add even more functionality! All accessories are sold separately. If you wish, there are complete kits available (Neptune FMK) that will get you up and running with the most popular options.

Read more less

Neptune Apex FMM Optical Sensor This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet.This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more.The sensors can be mounted into custom brackets or through a hole in a vessel. Included are a fastening nut and silicone washer.These sensors are sold individually.

Read more less

Neptune Flow Sensor - 1 Inch The Neptune Systems FS-100 Flow Sensor is designed to be used with the Flow Monitoring Module (FMM).Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 1" PVC plumbing.The FS-100 will work with flow rates from 150-1500 gph.

Read more less

This 6ft long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.Use this to daisy chain more than one Control 2 or Control 4 together to create a collective.

Read more less

Neptune Apex Display Module While most phones and tablets are the better option for the majority of users, we realize that some of you will still want a separate display.For those of you who still want the display option included in the Apex Jr and Apex Classic, we offer you this accessory to add to your new Apex 2016 controller. The new display comes with complimenting colors to your new Apex controller, with an orange back-lit screen.

Read more less

Neptune 1LINK Cable - 10 Foot Male/Male The 4-pin male to male cable many of you have been waiting for! It is ten feet long. This cable allows you to connect your DOS to the 1LINK thereby eliminating the need for the DOS to be connected to a power supply brick or the AquaBus cable. Just one wire!This really cleans up the wiring mess under the aquarium since just one single power brick can power two WAV pumps AND the DOS.

Read more less

These instruments are designed for all applications. Its' IP67 Waterproof casing and double junction (for pH) replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture.The modular design allows easy electrode and battery replacement.Manual calibration on the pH55 model prolongs the battery life up to 300 hours.All Waterproof testers are supplied in a leather casing complete with calibration solution, batteries, instruction manual and screwdriver for calibration.Specifications:- Range: -2.0 - 16.0 pH- Resolution: 0.1 pH- Accuracy: +/- 0.1 pH- Calibration: Automatic, 1 or 2 points with 2 sets of memorized buffers.- Automatic temperature compensation from -5 to 60C- Electrode: Replaceable Mi56P- Battery Life: 300 hours of continuous use- Battery Type: 4 x 1.5V

Read more less

Pinpoint ORP Storage Solution This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip properly moist and extend the life of your probe during storage (60 mL). Always make sure your sensor is kept in an electrode storage solution.If dry, refill the ORP meter cap with the American Marine ORP Storage Solution. Ensure that the sponge should be moist but not soaking wet.

Read more less

Neptune IO Breakout Box Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box's minidin 8 cable into the AquaController I/O port, and then attach the float switch, or water on the float switch wires to the quick connector terminals. No soldering or special tools required. Features/Specifications of the Neptune I/O Breakout Box 5' Cable plugs into the I/O Connector of the controller Supports 2 Digital inputs on the AC3. Supports 4 Digital inputs on the AC3Pro. Supports 6 Digital inputs on the PX 1000, Apex, and Apex Lite. Quick Connect Terminals - no soldering required. Recommended for use with 18 to 24 gauge stranded wire. 2 Mounting Holes for easy installation.

Read more less

Neptune Probe Module 1 (PM1) The PM1 control module plugs into your Apex or Apex Lite controller and allows you to monitor and control pH, ORP, and Temperature. Neptune PM1 Features Monitor/Control pH or ORP, and temperature. 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc. Full data logging support in Apex Base module. Up to 240 AquaBus modules can be added to the Apex system. Plug and Play. Automatically recognized when installed into the system. Two AquaBus connectors for flexible expansion via AquaBus. Led Status Indicator. Upgrade.able firmware. Compatible with Apex and Apex Lite systems. Galvanic Isolation for accurate and reliable probe readings. Comes with 3' AquaBus cable.

Read more less

The HYDROS Automatic WiFi Fish Feeder is suitable for a variety of fish foods A HYDROS Control is required to operate.The Fish Feeder is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can now feed your fish wirelessly over a 2.4 GHz WiFi frequency.Package Contents WiFi Fish Feeder USB Power Cable USB Power Plug Fixed Mounting Clamp Desiccant Freshness Pack Double-sided Mounting Tape Product Details Material: ABS WiFi Frequency: 2.4GHz Product Dimensions: 13.5x6x6.5cm Capacity: 165ml Power Supply: USB Cable

Read more less

The HYDROS Dosing Pump is a simple and affordable way to automate the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the Dosing Pump to any available HYDROS Control Drive Port for easy automation using the intuitive and straightforward yet robust configuration options of the HYDROS App.HYDROS Dosing Pump Features Quiet operation Will not back siphon >2,000 hours pump life Accuracy of +/- 2% Comes with HYDROS Drive Power Cable and 9.5ft of 3mm PVC tubing IMPORTANT: DO NOT power multiple units from a single outlet if you wish to control them separately.Hydros Dosing Pump Specs Average Output: 43mL/min Fluid Volume Range: 1mL - 6,500mL Accuracy: +/-2% Power: 12V (You CAN use a regular 12V power supply and connect it to a WiFi Strip Outlet) Requires HYDROS Control with an available Drive Port to operate; sold separately

Read more less

The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control 2 or Control 4) and does not require any additional power source.The HYDROS Water Level Sensor contains no moving parts that can fail. It's extremely tiny: it's a little over a half-inch thick with a circumference the size of a US penny. The optical eye is magnetically coupled with the magnet side measuring only 1/4" thick. It can be mounted to most clear, tinted, or painted surfaces up to 1/2" thick. The sensor operates in the daytime or complete darkness so it's safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium.You can use the HYDROS Water Level Sensor a multitude of different ways. For example, you could set one up as a high-level sensor and another as a low-level sensor as part of a dual-sensor automatic top-off (ATO) system. You could place these tiny optical sensors inside your dosing containers so you could be alerted when they need to be refilled. You could place a couple in an ATO reservoir: one can tell HYDROS to refill it and the other could prevent it from overflowing. Keep equipment from running dry by having HYDROS cut power to an outlet when the sensor is triggered. The sensors are easy to place, easy to move, and easy to clean.The HYDROS Water Level Sensor is an Official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of aquarium automation systems in the hobby today. CoralVue has thoroughly tested the Water Level Sensor to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the sensor so it connects with any HYDROS Sense Port using its aviation-style plug for safe operation. No additional power source is needed to run the sensor.HYDROS Water Level Sensor Specs Size: Diameter - 0.75" Sensor - 0.55" thick Magnet Mount - 0.25" thick Max Mounting Thickness: 1/2" Use as High or Low Level No Moving Parts Magnetic Attachment For freshwater and saltwater aquariums The HYDROS Water Level Sensor uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle). Powered, monitored, and controlled by plugging into a Sense Port on the HYDROS Control 2 or Control 4. No additional power cord is required. Manufactured by AutoAqua, an official HYDROS Technology Partner.

Read more less

A Smart and Affordable Way to Power Your Aquarium GearThe HYDROS Power 4 WiFi Power Strip is a smart power bar designed to work with the CoralVue HYDROS platform. The Power 4 has 4 x 120V AC outlets and 4 x USB ports that are WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can turn outlets on and off wirelessly over a 2.4 GHz WiFi frequency.The Power 4 has a range of 98 feet, so you can place power strips around your home without any difficulty connecting to your modem or router. Each of the 4 x outlets can be controlled individually while the 4 x USB ports are controlled as one. The 4 x outlets have individual LED indicators and the 4 x USB ports have a single LED indicator. The status LEDs indicate when an outlet is energized.Control and Monitor Aquarium Equipment from Your Mobile DeviceBy using the HYDROS app with the Power 4, you can create rules and schedules to turn on and off different pieces of aquarium equipment, like pumps, powerheads, lights, heaters, algae scrubbers, UV sterilizers, protein skimmers, and whatever else you may want to control on demand or put on a schedule. The USB ports are ideal for connecting and controlling aquarium cooling fans which you can program to turn on if your aquarium water gets too hot and then turn back off automatically when the water drops back within ideal ranges.Control Multiple Power Strips from a Single, Easy-to-Use Mobile AppAnother great thing about the Power 4 is that you can control multiple Power 4 Power Strips from the HYDROS app. You might use a couple of Power 4's to power your display tank, place another in the garage to use for a saltwater mixing station, and have units in each of your children's bedrooms to turn even beginner tanks into smart aquariums. The beauty of it is that you can control all these different outlets that are being used for different purposes using a single app.Be Notified If an Outlet Fails So You Can Take Corrective ActionYou can also monitor the outlets on your Power 4 power strip. If an outlet fails or loses its WiFi connection, you will be immediately notified via alerts to your mobile device. This safety feature can help prevent a tank catastrophe. For example, if the outlet powering your return pump failed, you would receive a notification to let you know something is awry so that you can take corrective action. As a temporary fix, you might decide to turn on all your flow pumps and increase their speed remotely via the HYDROS app to keep the water moving and the temperature stable until you can arrive home to investigate.HYDROS WiFi OutletsThe HYDROS Control system can utilize WiFi-based power outlets as part of its configuration. These outlets can be used to switch lights, pumps, heaters, and other equipment on or off as needed in an aquarium environment.The power outlets connect to the Control device via WiFi. Understandably, there are concerns about the general reliability of these outlets and the possibility of a loss of communication.One thing that should be pointed out is that HYDROS talks to the outlets directly on WiFi. No cloud interaction is involved. Thus, as long as your WiFi hub is operating, the outlets will work even if the outbound Internet connection fails.The following outlines some of the safeguards that have been taken to reduce the probability of failure.MonitoringHYDROS does not treat the outlets passively. Control 2 and Control 4 devices monitor each WiFi outlet continuously at a rate of at least once a second. HYDROS communicates with each outlet and verifies that it is returning the correct status. If the state is incorrect (for example, if the outlet was switched ON or OFF manually), HYDROS will immediately switch the outlet back to where it should be.If the HYDROS Control device cannot communicate or verify the status of an outlet, an alarm will go off, and it will send a notification email or SMS text to the user. This process allows the user to know if an outlet disappears or malfunctions immediately. On the Smart Plug WiFi outlets which support current measurement, HYDROS can also verify if the device's current consumption is within the expected range. So, for example, if a heater is supposed to consume 400 watts, an alert can be sounded if it is less than 350 watts (probably will be zero if it failed).HYDROS Power 4 Strip Specifications Power: AC 120V Outlets: 4 X AC Outlets | 4 X USB Ports Total Power Rating: 10A/1250W Total USB Power: 2A WiFi Frequency: 2.4 GHz Dimensions: 7.8 x 4 x 1.1in Weight: 483g

Read more less

Neptune Apex Pro Aquarium Controller Ultimate aquarium control for any serious aquarist. The Apex Pro Controller offers the most complete experience of monitoring and controlling your aquarium. - For the discerning aquarist. Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your smart phone when things go off track. Monitors your equipment - ensuring it is operating correctly at all times - and lets you know when it's not. Tracks your manual test results, maintenance, livestock purchases, and tank observations and helps you can correlate issues in your aquarium to the things that are happening inside. Manages the full operation of equipment (lights, pumps, filters, ATO, etc.) on your tank with simple setup wizards and an easy to use app. Takes the place of many costly and cumbersome discrete components such as light timers, heater controllers, pump controllers, etc. Gives you the peace of mind to know how your aquarium is doing, instantly, from anywhere in the world. Key New Features of the A3 Apex Pro Onboard FMM accessory ports. The Apex Pro has a total of 4 Includes the Liquid Level Sensor - 15 inch Includes the new Optical Leak Sensor (LD-3) Includes the new and improved Temperature Probe The Neptune Apex is Wireless Internet Ready! For years we have advocated a wired network connection for your Apex due to its superior reliability - and we still do. However, for many people a wired connection is just not possible.So, for this Apex we spent countless man-hours developing an incredible 802.11g/n Wi-Fi connection with reliability that rivals a wired connection. And, the connection process to your home network is amazingly simple - getting you set up and on the Apex Fusion cloud service in just a couple of minutes! Apex Energy Bar 832 - The Ultimate Power Control Hub This Energy Bar 832 was redesigned from the ground up. Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports. Each individual outlet has power monitoring and there are individual LED indicators for each outlet. Read on and watch the videos for more info. Apex Power Monitoring: For years we have been asked to do the power monitoring of the individual devices connected to each outlet - but it just wasn't possible without breaking your bank. Now it's here and with comes tons of benefits.For many the cost of the electricity to run a successful aquarium is a major concern in their household. Even for those where electricity is cheap, we believe most aquarists care a great deal about their energy consumption and its effect on the environment. Ironically, our energy usage could be directly connected to excess greenhouse gasses, the warming of the oceans, and the bleaching of the corals!However, armed with the right information we believe aquarists will not only be able to make operating and purchase decisions that will save them hundreds of dollars a year, but they will also be able to reduce their carbon footprint. Built-In 1Link and 24VDC Ports on the Neptune Apex: This Energy Bar has a built-in 100W, 24VDC power supply that can control up to three Neptune Systems 1LINK products like the WAV and DOS. It also includes two switchable 24V DC on/off outlets that are compatible with any 24V device under 30W and Neptune Systems 24V accessories like our Practical Multi-purpose Utility Pump (PMUP). Individual Outlet Indicator LED: Each Energy Bar AC outlet as well as the two 24VDC accessory ports have their own status LED. This LED tells you when that outlet is energized. The LED will also blink rapidly if a device is plugged in that exceeds the current capability for that outlet. The Neptune Apex offers Alarms and Decisions based on Power: Since the Apex is receiving continual power usage data from the Energy Bar 832, it can be configured to send you notifications when a device is not using power as it should be. An example would be a return pump showing no power consumption when the outlet is on or a skimmer whose power consumption will show differently when its airline is clogged when compared to normal operation. These high and low limits are completed customizable by individual outlet. You can even use this power data to control other devices. All Outlets Relay Switched on the Apex EB832: Times have changed and it is fairly uncommon now for aquariums to have AC devices that must be cycled on and off continuously. This means that we could now switch all AC outlets to relay switching since there is no need to have soft start and there is no concern for the noise of the relay. 13 Total Connections Available on your Neptune Apex! 8 - 120V AC Outlets all switched with relays rated for millions of cycles 3 - 1LINK 24VDC Smart outlets for devices such as WAV, DOS, etc. 2 - Switchable 24VDC outlets for accessories such as small pumps, solenoids, fans, etc. What is included in your Neptune Apex Pro Box 1 - Neptune Apex Pro Base System 1 - Energy Bar 832 1 -Temperature Probe - new design 1 - Double Junction ORP Probe 1 - Double Junction pH Probe 4 - Built in FMM ports 1 - Optical Leak Sensor (LD-3) 1 - 15" Liquid Level Sensor See images for product comparisons and what is included with the different models.Note: The display or salinity probe is NOT included with the Apex Pro and Apex A3 Systems. They are available for purchase separately.More useful information and videos on the Apex A3 Series

Read more less

Adapter to connect IceCap Gyre pumps to your Hydros Wave Engine.

Read more less

Why purchase a separate and expensive auto top-off system when HYDROS can do the job for you? The HYDROS Auto Top-Off Kit comes with everything you need to use your HYDROS device (like the Control 2 or Control 4) as an ATO system.The HYDROS Auto Top-Off Kit Includes: HYDROS Water Level Sensor (plugs into HYDROS Sense Port) HYDROS DC Micro Pump (plugs into HYDROS Drive Port) Hang-On Tubing Mount Tubing (8.5mm OD - 6.5mm ID) Siphon Break HYDROS Water Level Sensor: An Easy and Accurate Way to Monitor Your Water Level!The HYDROS Water Level Sensor contains no moving parts that can fail. It's extremely tiny: it's a little over a half-inch thick with a circumference the size of a US penny. The optical eye is magnetically coupled with the magnet side measuring only 1/4" thick. It can be mounted to most clear, tinted, or painted surfaces up to 1/2" thick. The sensor operates in the daytime or complete darkness so it's safe for use hidden inside your aquarium stand or in the back chambers of an all-in-one aquarium. The sensor is easy to place, easy to move, and easy to clean. The sensor connects with any HYDROS Sense Port using an aviation-style plug for safe operation. No additional power source is needed to run the sensor.HYDROS DC Micro Pump: Controlled and Powered by HYDROS to Top-Off Your Tank!The HYDROS DC Micro Pump is powerful despite its small size. The pump measures 1.6" L x 1.062" W x1.45" H. The pump has a maximum head pressure of 8'. The flow rate of the pump is 74 gallons per hour. This 12V brushless pump draws a maximum of 4.5W and has an average life expectancy of 30,000 hours (over 3 years). When connected to a Drive Port on the HYDROS Control 2 or Control 4, the controller will supply power to the pump so no additional cords or power bricks are required for operation. Using a HYDROS aquarium controller for your auto top-off system is not only a reliable solution but it also helps clear wire clutter in and around your aquarium.

Read more less

Neptune AquaBus Cable - 15 Foot Male/Male 15 Foot Male/Male Neptune Apex AquaBus cable.Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.

Read more less

Pinpoint AC Adapter Fits any American Marine Pinpoint Monitor.Ensures accurate readings by eliminating fluctuations when regular 9V batteries are running low.Pays for itself within months of regular use!

Read more less

Neptune Apex Aquarium Controller Core control and everyday monitoring for your aquarium. The Apex System offers the control but with scaled back monitoring when compared to the Apex Pro. The Apex come with room to grow should you wish more features down the road. Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your smart phone when things go off track. Monitors your equipment - ensuring it is operating correctly at all times - and lets you know when it's not. Tracks your manual test results, maintenance, livestock purchases, and tank observations and helps you can correlate issues in your aquarium to the things that are happening inside. Manages the full operation of equipment (lights, pumps, filters, ATO, etc.) on your tank with simple setup wizards and an easy to use app. Takes the place of many costly and cumbersome discrete components such as light timers, heater controllers, pump controllers, etc. Gives you the peace of mind to know how your aquarium is doing, instantly, from anywhere in the world. Key New Features of the A3 Apex Onboard FMM accessory ports. The Apex Pro has a total of 3 Includes the new and improved Magnetic Optical Sensor Includes the Sold Surface Leak Sensor (LD-2) Includes the new and improved Temperature Probe The Neptune Apex is Wireless Internet Ready! For years we have advocated a wired network connection for your Apex due to its superior reliability - and we still do. However, for many people a wired connection is just not possible.So, for this Apex we spent countless man-hours developing an incredible 802.11g/n Wi-Fi connection with reliability that rivals a wired connection. And, the connection process to your home network is amazingly simple - getting you set up and on the Apex Fusion cloud service in just a couple of minutes! Apex Energy Bar 832 - The Ultimate Power Control Hub This Energy Bar 832 was redesigned from the ground up. Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports. Each individual outlet has power monitoring and there are individual LED indicators for each outlet. Read on and watch the videos for more info. Apex Power Monitoring: For years we have been asked to do the power monitoring of the individual devices connected to each outlet - but it just wasn't possible without breaking your bank. Now it's here and with comes tons of benefits.For many the cost of the electricity to run a successful aquarium is a major concern in their household. Even for those where electricity is cheap, we believe most aquarists care a great deal about their energy consumption and its effect on the environment. Ironically, our energy usage could be directly connected to excess greenhouse gasses, the warming of the oceans, and the bleaching of the corals!However, armed with the right information we believe aquarists will not only be able to make operating and purchase decisions that will save them hundreds of dollars a year, but they will also be able to reduce their carbon footprint. Built-In 1Link and 24VDC Ports on the Neptune Apex: This Energy Bar has a built-in 100W, 24VDC power supply that can control up to three Neptune Systems 1LINK products like the WAV and DOS. It also includes two switchable 24V DC on/off outlets that are compatible with any 24V device under 30W and Neptune Systems 24V accessories like our Practical Multi-purpose Utility Pump (PMUP). Individual Outlet Indicator LED: Each Energy Bar AC outlet as well as the two 24VDC accessory ports have their own status LED. This LED tells you when that outlet is energized. The LED will also blink rapidly if a device is plugged in that exceeds the current capability for that outlet. The Neptune Apex offers Alarms and Decisions based on Power: Since the Apex is receiving continual power usage data from the Energy Bar 832, it can be configured to send you notifications when a device is not using power as it should be. An example would be a return pump showing no power consumption when the outlet is on or a skimmer whose power consumption will show differently when its airline is clogged when compared to normal operation. These high and low limits are completed customizable by individual outlet. You can even use this power data to control other devices. All Outlets Relay Switched on the Apex EB832: Times have changed and it is fairly uncommon now for aquariums to have AC devices that must be cycled on and off continuously. This means that we could now switch all AC outlets to relay switching since there is no need to have soft start and there is no concern for the noise of the relay. 11 Total Connections Available on your Neptune Apex! 8 - 120V AC Outlets all switched with relays rated for millions of cycles 3 - 1LINK 24VDC Smart outlets for devices such as WAV, DOS, etc. What is included in your Neptune Apex Box 1 - Neptune Apex Base System 1 - Energy Bar 832 1 - Temperature Probe - new design 1 - Double Junction pH Probe 3 - Built in FMM ports 1 - Optical Magnetic Sensor 1 - Solid Surface Leak Sensor (LD-2) See images for product comparisons and what is included with the different models. Note: The display is NOT included with the Apex and Apex Jr A3 Systems. It is available for purchase separately. More useful information and videos on the Apex A3 Series

Read more less

The HYDROS Leak Detection Rope Sensor is the first of its kind in the aquarium industry. The moment water comes into contact with it, that information can be used to alert you on your smartphone, sound an alarm, turn pumps off, and other actions that can protect your aquarium, home, or office from a total disaster.A problem with traditional solid surface leak sensors is that you have to buy several to really feel a sense of security. What are the odds water will pool in the exact spot where a single sensor sits?Another solution we've come up with is a rope-style water sensor. You can wrap it around your aquarium, sump, stand, or wherever else you like. This type of sensor makes a lot more sense when you want leak detection security in a wider area. You can configure the HYDROS app to perform whatever action(s) you want to happen when a leak is detected: flash a specific light color on your HYDROS controller, turn off a pump, shut down your protein skimmer, send you a mobile alert so you can come home (or ask a friend to check on the tank). It's easy to do and you're in control.Just plug the rope sensor into a Sense Port on your HYDROS device. Next, place the rope flat on the surface where liquid detection is desired. If tape is required to hold the rope in place, be sure to only apply it on the ends. You want to expose as much of the sensor as possible for maximum protection. Once the rope sensor is in place, it is very important to test it to ensure it's working properly. To perform a test, open the HYDROS app on your mobile device and configure the Sense port so the rope sensor is on. Drip a bit of tap water across the rope sensor so the black and white sensing cables come into contact with the liquid. Monitor the sensor's status in the HYDROS app to see check if it's reading is dry or wet. If everything looks good, you're done! Dry the cable and you're ready to configure alerts and equipment to take action if a leak occurs.You don't have to occupy another Sense port to secure a larger area. HYDROS Leak Detection Rope Sensors can be daisy-chained together to form a larger perimeter for protection. Got a big tank? You can lengthen the line of defense to lasso around your large aquarium by simply connecting multiple rope sensors together. Leak detector ropes do not need an additional power source, even if you connect them together. Rope leak detectors do not occupy outlets on power strips or require a HYDROS Drive port connection to operate.HYDROS Leak Detection Rope Sensors offer users 24/7 remote monitoring. Be instantly notified at the first sign of a leak so you can prevent a flood. Tap into the HYDROS app to immediately check the status of water parameters, equipment, power strips, and smart plugs. Make decisions based on real-time data to take appropriate corrective actions from anywhere and at any time.10 ways you can use the HYDROS Leak Detector Rope Place it alongside your aquarium Line it outside of your sum Wrap it around a reactor Lay it on the floor in an open area Fit it into a hard-to-read corner Wrap around plumbing pipes Mount it to a controller board Use it in your mixing station Affix it to water supply and return lines Remotely in your garage, bathroom, basement, laundry room, kitchen, or wherever you make or use water.

Read more less

Neptune Trident Service Kit The DIY Service Kit is an option that is great for our customers that would like to complete the recommended service on their own. This is only for a most hand-on customers that consider themselves "mechanically inclined", and can follow directions well. When should you service your Neptune Trident? We recommend, but not require, that your Neptune Systems Trident receive a preventative service between 24-36 months of operation. It's possible some Tridents will need to be serviced before this recommended service interval, but that would be the exception not common place. Note: Your Trident should be in good working condition prior to servicing. The service kit will in most circumstances not fix a Trident that is not working! What's Included with your Trident Service Kit Replacement Peristaltic Pump Cuvette and Tubing Internal Tubing Assembly Trident Sample Line Filter Sample & Waste Line plus connectors Full Service Video (see below)

Read more less

American Marine Pinpoint Calibration Thermometer American Marine Inc. is proud to introduce the New Pinpoint Calibration Thermometer, the only truly precise and affordable digital thermometer system with a large range calibration feature and a replaceable NIST referenced probe.The PINPOINT Calibration Thermometer features superior temperature accuracy with a lab grade waterproof thermistor fiber with a triple mini-jack connection and 10-foot cable. A standard pair of AAA batteries will power the instrument for approximately 18-24 months of continuous duty. Features of the Pinpoint Calibration Thermometer Affordable and accurate digital thermometer system Large range calibration feature with user-replaceable probe Lab grade waterproof 10-foot thermistor fiber with a triple mini-jack connection Requires two AAA batteries (not included) for approx. 18-24 months of continuous duty

Read more less

Neptune Apex DC24 to Bare Wire Cable The second cable is for the DIY folks out there. This cable connects to the 24VDC accessory connections on the 1LINK. This 10 foot cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W.Examples might include a solenoid valve or a fan.This accessory port can be switched on and off just like an EB8 outlet.

Read more less

Neptune MXM Control Module Bring the award-winning pumps and lights from EcoTech Marine and AquaIllumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems Apex and Apex Fusion interface. Expand Your Possibilities and Mix and Match your Favorite Equipment Schedule Feeding With the Apex, you can easily start a feed cycle for your fish and corals using a light pulse for your Vortechs, feed intensity for your Vectra, turning off your skimmer, and activating your AFS, all with a push of a button or at a scheduled time. Water Change or Service By pressing a button your Vectra will turn off, your Radion lights will go a bit more white to be able to see more clearly in your aquarium, and Vortechs will turn off. Photo Mode By pressing a button your Vectra will turn off, your Radion lights will go a bit more white to be able to see more clearly in your aquarium, and Vortechs will turn off. Protect your Aquarium Not only can you configure easy routines with your equipment, but you can also help protect your aquarium by configuring your devices to take special actions. Temperature Monitoring If your aquarium gets too warm, especially on hot days, you can lower the intensity of your lighting to help reduce the temperature. ORP Monitoring If your aquarium gets too warm, especially on hot days, you can lower the intensity of your lighting to help reduce the temperature. Neptune MXM Features & Specifications Wirelessly controls Mobius compatible EcoTech Radions, Vectras, and Vortechs Wirelessly controls Mobius compatible AI Hydras, Primes, and Neros A MXM has the ability to connect up to twenty-five different Mobius compatible devices per MXM Additional MXMs can be utilized to connect more compatible devices Two AquaBus connectors for flexible expansion via AquaBus and powered over AquaBus Comes with 3' AquaBus cable Fully upgradeable - MXM firmware and pump firmware can be updated for feature enhancement LED Status indicator and wireless status indicator Compatible with all A2 and A3 Apex Systems

Read more less

Pinpoint ORP Probe Replacement Easily fits into the PinPoint ORP Monitor.Ensure that you keep the tip of the probe always moist. Do not let it dry out! If it does, you may re-hydrate the probe by submersing in water for 24 hours.J&L Aquatics recommends that you replace your ORP probe approximately every two years or when your ORP readings fluctuate after calibration. Features of the Pinpoint ORP Probe Fast and precise ORP measurement Universal BNC connector - fits almost every controller including Neptune, Hydros, Milwaukee, etc. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system Each probe features a 10 foot cable with a high interference suppression jacket Ag-AgCl reference, and is 99.9% pure platinum Probe Storage Bottle is included

Read more less

Neptune Trident NP Reagent 2 Month Kit Replacement Reagent Kit for Trident NP (2 Month Supply) Keep your Trident NP Nitrate and Phosphate Tester running smoothly by replacing your reagents on time. This kit is easy to use with clear instructions for hassle-free reagent changes. These reagents ensure consistent and reliable results, covering a two-month testing period with one nitrate and one phosphate test per day. Note: Given the nature of the chemicals used in the Trident NP Reagents, they must be shipped upright and via ground shipping only. Using a Trident NP Waste Container or other container made of HDPE Class 2 plastic or glass is required (sold separately). What's Included with your new Neptune Trident NP Reagent 2 Month Kit Calibration Solution NP Reagent 1 NP Reagent 2 NP Reagent 3a NP Reagent 3b Waste Neutralizer

Read more less

Adapter to connect up to 4 0-10v pumps to your Hydros Wave Engine.

Read more less

Neptune Flow Sensor - 1/4 Inch The Neptune Systems FS-25 Flow Sensor is designed to be used with the Flow Monitoring Module (FMM).Usually used with aquarium accessories like RODI inputs, calcium, reactor feed lines, etc., this flow sensor can be placed in line with the flow on 1/4" tubing, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe.The flow sensor itself uses push-fit connectors to make connecting to your system as simple as possible.The FS-25 will work with flow rates from 3-12 gph.

Read more less

Neptune FMM 24VDC 36W Power Supply This 24VDC, 36W power supply is used with the FMM so that you can attach the powered accessories above like the PMUP or the Solenoid Valve.This power supply is for 110V USA-style outlets.

Read more less

Neptune Apex Power Supply Replacement Power Supply for the Neptune Systems Apex Aquarium Controller.

Read more less

Neptune Apex Energy Bar 4 The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize - and not all systems are created equal! It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium. Neptune Energy Bar 4 (EB4) Features 4 independently controllable 120V Outlets (3 Outlets @ 8 Amps, 1 Outlet @ 12 Amps (total current must be less than 15 Amps). Plug and Play Built-in 4 Port hub so that accessories can be easily added Active electrical current monitoring and logging Fail-safe features. On communication failures outlets revert to user settable default settings High reliability direct wired connection to the Apex System(does not use X10) All four of the outlets use mechanical relays for switching "Soft-Start" for reduced pump wear Up to 240 EB4s can be daisy chained together for up to 960 switched outlets All 4 outlets independently controllable Built-in circuit breaker. 4 Mounting Holes for easy installation Compact custom aluminum enclosure (7.5" x 3.75" x 1.8")

Read more less