The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1/2" MPT (3/4" hose barb adapter included)Output: 1/2" MPT (3/4" hose barb adapter included)0' Head: 290GPH4' Head: 150GPHFlowchart for the Lifegard Aquatics Quiet One 1200 Water Pump
Sicce Syncra 1.0 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 1.0 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 251 GPH Power Consumption: 16 Watts (0.25A) Max Head: 4.9 feet Inlet connection size: 0.5" - 0.7" Outlet connection size: 0.5" - 0.7" Further information on the Sicce Syncra-Silent Water Pumps
Sicce Syncra 1.5 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 1.5 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 367 GPH Power Consumption: 23 Watts (0.43A) Max Head: 6 feet Inlet connection size: 0.6" - 0.8" Outlet connection size: 0.6" - 0.8" Further information on the Sicce Syncra-Silent Water Pumps
Sicce Syncra 0.5 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 0.5 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 185 GPH Power Consumption: 8 Watts Max Head: 4 feet Inlet connection size: 3/8" - 9/16" Outlet connection size: 3/8" - 9/16" Further information on the Sicce Syncra-Silent Water Pumps
Sicce Syncra Nano Water Pump A small pump with multiple applications!2 in 1 Wet & Dry Application.Ideal for water fountains or small applications such as media filters and nano aquariums.Developed to grant a silent operation and a great durability, this pump is extraordinarily compact but complete with all SICCE Technology features: Sicce Syncra Nano Features A front flow regulation with 180 degree rotation outlet allows an easy position for any application. SICCE provides with a double chamber for Dry operation (outside the water), including an extra sealing rubber o-ring. SYNCRA Nano pumps are equipped with Self-Cleaning System, developed in all SICCE newest generation pumps: water is forced into to impeller chamber so to keep it lubricated and clean, avoiding also any residual air bubble that could create operation noise, granting a continuously operation and lower maintenance of the pumps. SICCE Self-Cleaning System also grants the cool operation of the motor, lowering heat transmission into the water of the aquarium or fountain. Unique feature: Removable shaft for an easy-cleaning of the pump impeller chamber. Extremely Compact with just 6cm (2.36") total length Sicce Syncra Nano Specifications Flow rate: 140 - 360 l/h (37 - 95GPH) Max flow rate with long-prechamber: 430 l/h (113GPH) Max Head: 70 cm (27") Energy Consumption: 2-8 Watts
Eheim CompactON Pump 1000 EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour. The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water. When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps. In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps. With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water Eheim CompactON 1000 Pump Features Compact aquarium pump for versatile use Silent High pump performance at low power consumption Attached to the glass with durable suction cups Suitable for fresh water and marine water Specifications of the Eheim CompactON 1000 Water Pump Flow rate: 400-1000 LPH (106-264 GPH) Max Head: 1.4 meters (4.59 Feet) Power Consumption: 15 Watts Connections: 16/19mm (5/8") Dimensions: 47 x 79 x 73mm (1.85 x 3.11 x 2.87")
Today, aquarium engineering offers a number of universal pumps with various outputs and shapes. The new TUNZE Silence pump combine all the advances you may request of modern and powerful universal pump for saltwater and fresh-water aquariums.In the production of these pumps, we have paid special attention to quality ensuring a low-maintenance permanent operation for many years.They have been built in keeping with the strictest international safety standards.Features/Specifications Very silent running rotor with high-performance one-part magnet - all-ceramic bearing Very low energy consumption Adjustable output In-sump or inline operation Maximum Flow: 211 GPH Energy Consumption: 3 - 8 Watts Maximum Head: 4 Feet Outlet Hose Size: 1/2" This is also the replacement pump for the new style Nano Skimmer 9002
Flow chart for the Tunze Silence Pump 1073.008
Sicce Syncra 2.0 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 2.0 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 568 GPH Power Consumption: 43 Watts Max Head: 6.5 feet Inlet connection size: 0.8" - 1" Outlet connection size: 0.8" - 1" Further information on the Sicce Syncra-Silent Water Pumps
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 3/4"Output: 3/4"Flow Rate at 0' Head: 950 GPHFlow Rate at 4' Head: 800 GPHFlow Rate at 6' Head: 760 GPHFlowchart for the Danner Mag-Drive 950 Supreme Water Pump
Sicce Syncra 3.0 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 3.0 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 714 GPH Power Consumption: 48 Watts (0.43A) Max Head: 9.9 feet Inlet connection size: 0.8" - 1" Outlet connection size: 0.8" - 1" Further information on the Sicce Syncra-Silent Water Pumps
The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1"Output: 1"0' Head: 1017GPH6' Head: 600GPHFlowchart for the Pentair Aquatics Quiet One 4000 Water Pump
Eheim CompactON Pump 600 EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour. The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water. When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps. In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps. With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water Eheim CompactON 600 Pump Features Compact aquarium pump for versatile use Silent High pump performance at low power consumption Attached to the glass with durable suction cups Suitable for fresh water and marine water Specifications of the Eheim CompactON 600 Water Pump Flow rate: 250-600 LPH (66-158 GPH) Max Head: 1.0 meters (3.28 Feet) Power Consumption: 7 Watts Connections: 12/16mm (1/2") Dimensions: 72 x 38 x 62mm (2.8 x 1.5 x 2.4")
Eheim CompactON Pump 300 EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour. The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water. When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps. In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps. With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water Eheim CompactON 300 Pump Features Compact aquarium pump for versatile use Silent High pump performance at low power consumption Attached to the glass with durable suction cups Suitable for fresh water and marine water Specifications of the Eheim CompactON 300 Water Pump Flow rate: 37-65 LPH (45-79 GPH) Max Head: 0.6 meters (1.96 Feet) Power Consumption: 7 Watts Connections: 12/16mm (1/2") Dimensions: 72 x 38 x 62mm (2.8 x 1.5 x 2.4")
Sicce Ultra Zero Utility Pump The Sicce ULTRA ZERO pump is designed for pumping cloudy water without large debris content.It is a multi-purpose pump for solving all kinds of minor do-it-yourself problems in which water has to be eliminated or moved. It is intended mainly for domestic use and it is great for water changes or pumping water in and out of aquariums, water tanks, rainwater storage tanks, saltwater mixing containers, swimming pools, draining swimming pool covers, draining basements and more.The Sicce ULTRA ZERO is a pump with great performances for hydroponic applications: it sucks water at a minimum depth of 2mm and can pump soft solids with dimensions up to 1mm, an important feature for hydroponic systems because of the fertilizers and other substances in the tanks.The ceramic rotor is also an important feature when pumping aggressive liquids Sicce UItra Zero Features Fully submersible 3/4" discharge fits standard garden hoses Thermoplastic housing will not rust or corrode Easy removable base for cleaning. No tools required Ceramic shaft
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 3/4"Output: 3/4"Flow Rate at 0' Head: 1200 GPHFlow Rate at 4' Head: 1100 GPHFlow Rate at 6' Head: 950 GPHFlowchart for the Danner Mag-Drive 1200 Supreme Water Pump
Neptune COR-20 Water Pump Your return pump is by far the most important piece of equipment on your aquarium. It circulates the water which is basically the life-blood of a tank. Creating a great aquarium is just like building a great body - it all starts at the core - and this is precisely how our pump got its name!The COR is a variable speed, brushless, DC-driven centrifugal water pump designed specifically for aquariums to be intelligent, energy-efficient, unbelievably quiet, and incredibly powerful for its size. Neptune COR20 Features Runs Stand-Alone - No Apex necessary! Compatible with all Apex Systems Up to 2000 GPH (7500 LPH) For internal or external applications IQ-Level sets the proper min and max flow for your aquarium Includes oversized 1.25" union Energy efficient - Uses less than 90W of power! Incredibly quiet No Apex Necessary!The COR-20 does not require an Apex to operate. If you do not yet have an Apex don't worry, much of its functionality is available from the button and LED interface on its driver. However, connect it to your Apex and it becomes the most intelligent and feature-rich aquarium pump on the market today!Compatible With Every Apex.All COR pump models are fully compatible with every Apex system on the market. Simply connect the COR pump driver to any available AquaBus connection on your Apex system and then run the setup task in Apex Fusion. It's that easy!Great Flow To Power RatioThe COR-20 puts out great flow while at the same time being super-stingy on power making it friendly to you wallet and the environment! Be sure to plumb the COR-20 using the largest diameter pipe possible to get the best performance. We recommend at least 1.25".Advanced ControllabilityThe COR was built from the ground up with Apex controllability in mind. Control your pump output percentage, get real-time operational feedback from the pump, integrate it into complex feed routines, and monitor the status of the pump from anywhere in the world via Apex Fusion.Easy InstallationConnect the plumbing, plug the COR into its driver and plug it in a 1LINK port. With just a few button presses you will be able to set the pump flow rate and feed modes. A set up task will take you step by step through the entire install process.Whisper-Drive TechnologyThe COR uses the latest in Vector Control, BLDC motor technology. This drives the COR pump in a way that is both energy efficient as well as nearly vibration and noise free. Go ahead, we challenge you to find a quieter pump!Obstruction DetectionSnails, filter pads, or other foreign objects often find their way into a pump. Should the intake to your COR or any of your plumbing become significantly obstructed, the COR will alert you by flashing the LED on the driver. When the COR is connected to an Apex and the internet, it will send an alert to your mobile device as well.Internal Temperature MonitoringThe pump driver is continually monitoring the internal temperature of the COR pump motor. If it reaches an unsafe level, the driver will slow the pump down just enough to bring the temperature into an acceptable range while also providing you a notification. Some pumps shut off completely when they have a temperature issue, but the COR slows down so your tank will continue to circulate - giving you time to address the problem.IQ LevelSet the output level you desire for your aquarium and overflow capability and the COR will memorize that and make it your "100%" for your aquarium. If power should go off, when it restarts it will always return to that memorized setting. Also, during feed modes, your water will not completely back-siphon. This prevents the burping and bubbling that normally occurs when a pump powers back up.Feed ModeWith some simple configuration in Apex Fusion you can set a Feed Mode that will slow the pump to any level you choose. You can even have other tank operations sequence with this feed mode and the time interval of the Feed Mode can be customized as well. The buttons on the COR driver also function as an easy to use feed button.Included FittingsThe COR comes complete with all the fittings necessary for most aquarium configurations (0.75" output, 1.0" input). But we've also included a 1.25" union for the output so you can connect the pump in a manner that will result in the least amount of head loss. Plumb your main return-line in 1.25" and get the full potential of the COR pump - as much as 50% or more flow! What's Included with your Neptune COR20 Pump COR Pump COR-20 Pump Driver 100W - 24V DC Power Supply Power Cord 1.25in. PVC Union (Slip->BSPP) 1.0in. Slip Fitting 0.75in. Slip Fitting 3-foot AquaBus Cable
Sicce MicraPlus Water Pump The Sicce Micra Plus Pumps are completely submersible recirculation pumps driven by a permanent magnet type synchronous motor for every type of aquarium, terrarium, internal or external fountain, landscaping construction, and for any application which requires the recirculation of water.The primary feature of these pumps is that the suction inlet is made from its bottom, which permits optimum operation even with very low water levels. Built in accordance with the most strict international safety standards, the pumps are easy to maintain and have incredible small dimensions for their elevated performance and reliability.The entire line is provided with a variable flow rate regulator as well as adaptors to connect flexible hoses from 1/2" or 3/8" The compact dimensions of these pumps, make them ideal for use in small spaces. Sicce MicraPlus Specifications & Features 158gph adjustable flow rate 2.8 feet shut off 7 watts/ 120 volts CE & UL listed 2 year guarantee Stainless stealshaft Available with 6' bipolar or grounded cord Fully submersible Ideal for reactors and similar filters Interchangeable sponge filter Pump Dimensions: 43mm x 57mm x 52mm Outlet Tube Adapter Size: 1/2" or 3/8"
Sicce Syncra 4.0 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 4.0 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 961 GPH Power Consumption: 85 Watts (0.85A) Max Head: 12.5 feet Inlet connection size: 1" - 1.2" Outlet connection size: 0.8" - 1" Further information on the Sicce Syncra-Silent Water Pumps
The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1"Output: 1"0' Head: 1506GPH6' Head: 950GPHFlowchart for the Pentair Aquatics Quiet One6000 Water Pump
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 300 GPHFlow Rate at 4' Head: 250 GPHFlow Rate at 6' Head: 180 GPHFlowchart for the Danner Mag-Drive 350 Supreme Water Pump
The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1"Output: 1"0' Head: 575GPH6' Head: 275GPHFlowchart for the Lifegard Aquatics Quiet One 2200 Water Pump
Replacement Impeller and Shaft Assembly for the Lifegard Aquatics 2000, 3000, and 4000 PRO Aquarium Pump.Please Note: This will not fit the non-pro (older) versions of the Quiet One Water Pumps. Double check impeller sizing if unsure - these impellers are 3.5" in length including the shaft.
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 700 GPHFlow Rate at 4' Head: 475 GPHFlow Rate at 6' Head: 400 GPHFlowchart for the Danner Mag-Drive 700 Supreme Water Pump
Ecotech Vectra M2 Water Pump EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile DeviceAll Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery BackupBlizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible InstallationIncluded with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup. Vectra M2 Return Pump Modes Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial. Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration. Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed. Closed Loop Modes of the Ecotech Vectra M2 Pump Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours. The Vectra M2 is Mobius Compatible Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and RadionLED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger.Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expect? Our award winning customer service staff can log into your account and suggest changes for you. The Ecotech Vectra M2 is Battery Backup Compatible In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing.By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants.*Hours are estimated and will vary depending on battery life, pump mode, and other factors.** For best performance when in return pump configuration, a Vectra Battery Backup Booster is required. Check out The Vectra Pump Advantage Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons:1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist. Ecotech Vectra M2 Pump Specifications Flow Rate: 2000 GPH (7500 LPH) Wireless: Included Max Head Pressure: 21.5 feet (6.5 meters) Footprint: 4.5" x 7.5" (113.5mm x 192.6mm) Fittings: Input: 1.25" (31.75mm) / Output: 1" (25mm) Max 96W Power Supply What's Included with your Vectra M2 Water Pump 1x Vectra M2 Mobius Ready DC Pump 1x Vectra QuietDrive Driver 1x Driver Mounting Bracket 1x Power Supply 1x Input Quick Coupler 1x Output Quick Coupler 1x Driver Mounting Bracket 1x Instructional Manual
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1"Output: 1"Flow Rate at 0' Head: 2400 GPHFlow Rate at 4' Head: 1550 GPHFlow Rate at 6' Head: 1355 GPH
The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1"Output: 1"0' Head: 780GPH6' Head: 450GPHFlowchart for the Pentair Aquatics Quiet One 3000 Water Pump
The newly designed Quiet One Pro pumps are great for both fresh and salt water applications and can be used in either wet or dry applications.The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Output: 1/2" Tube0' Head: 105GPH1' Head: 55GPH
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 3/4"Output: 3/4"Flow Rate at 0' Head: 1800 GPHFlow Rate at 4' Head: 1390 GPHFlow Rate at 6' Head: 1125 GPHFlowchart for the Danner Mag-Drive 1800 Supreme Water Pump
Neptune COR-15 Water Pump Your return pump is by far the most important piece of equipment on your aquarium. It circulates the water which is basically the life-blood of a tank. Creating a great aquarium is just like building a great body - it all starts at the core - and this is precisely how our pump got its name!The COR is a variable speed, brushless, DC-driven centrifugal water pump designed specifically for aquariums to be intelligent, energy-efficient, unbelievably quiet, and incredibly powerful for its size. Neptune COR15 Pump Features Connects to any Apex with a 1 Link port available Up to 1500 GPH (5700 LPH) For internal or external applications IQ-Level sets the proper min and max flow for your aquarium Includes oversized 1.25" union Energy efficient - Uses less than 50W of power! Incredibly quiet No power brick means clean install Connects To Any Model Apex Via An Available 1 Link PortThe COR-15 uses a relatively new connection standard for the Apex called 1LINK. The 1LINK port provides up to 50w of power as well as the control signal to connected devices. The advantage for devices like the COR-15 is that no additional power supplies are necessary. These 1LINK ports are present on the recently released Energy Bar 832 as well as on a separate 1LINK module. Compatible With Every Apex.All COR pump models are fully compatible with every Apex system on the market. Simply connect the COR-15 pump driver to any available 1Link port on your Apex system - either an Energy Bar 832 or a 1Link module. It's that easy!Great Flow To Power RatioThe COR-15 puts out great flow while at the same time being super-stingy on power making it friendly to you wallet and the environment! Be sure to plumb the COR-15 using the largest diameter pipe possible to get the best performance. We recommend at least 1.25".Advanced ControllabilityThe COR was built from the ground up with Apex controllability in mind. Control your pump output percentage, get real-time operational feedback from the pump, integrate it into complex feed routines, and monitor the status of the pump from anywhere in the world via Apex Fusion.Easy InstallationConnect the plumbing, plug the COR into its driver and plug it in a 1LINK port. With just a few button presses you will be able to set the pump flow rate and feed modes. A set up task will take you step by step through the entire install process.Whisper-Drive TechnologyThe COR uses the latest in Vector Control, BLDC motor technology. This drives the COR pump in a way that is both energy efficient as well as nearly vibration and noise free. Go ahead, we challenge you to find a quieter pump!Obstruction DetectionSnails, filter pads, or other foreign objects often find their way into a pump. Should the intake to your COR or any of your plumbing become significantly obstructed, the COR will alert you by flashing the LED on the driver. When the COR is connected to an Apex and the internet, it will send an alert to your mobile device as well.Internal Temperature MonitoringThe pump driver is continually monitoring the internal temperature of the COR pump motor. If it reaches an unsafe level, the driver will slow the pump down just enough to bring the temperature into an acceptable range while also providing you a notification. Some pumps shut off completely when they have a temperature issue, but the COR slows down so your tank will continue to circulate - giving you time to address the problem.IQ LevelSet the output level you desire for your aquarium and overflow capability and the COR will memorize that and make it your "100%" for your aquarium. If power should go off, when it restarts it will always return to that memorized setting. Also, during feed modes, your water will not completely back-siphon. This prevents the burping and bubbling that normally occurs when a pump powers back up.Feed ModeWith some simple configuration in Apex Fusion you can set a Feed Mode that will slow the pump to any level you choose. You can even have other tank operations sequence with this feed mode and the time interval of the Feed Mode can be customized as well. The buttons on the COR driver also function as an easy to use feed button.Included FittingsThe COR comes complete with all the fittings necessary for most aquarium configurations (0.75" output, 1.0" input). But we've also included a 1.25" union for the output so you can connect the pump in a manner that will result in the least amount of head loss. Plumb your main return-line in 1.25" and get the full potential of the COR pump - as much as 50% or more flow! What's Included with your new COR-15 Water Pump COR Pump COR-15 Pump Driver 1.25in. PVC Union (Slip->BSPP) 1.0in. Slip Fitting 0.75in. Slip Fitting 6-foot 1LINK Cable
Eheim CompactON Pump 2100 EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour. The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water. When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps. In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps. With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water Eheim CompactON 2100 Pump Features Compact aquarium pump for versatile use Silent High pump performance at low power consumption Attached to the glass with durable suction cups Suitable for fresh water and marine water Specifications of the Eheim CompactON 2100 Water Pump Flow rate: 1400-2100 LPH (370-554 GPH) Max Head: 2.4 meters (7.87 Feet) Power Consumption: 38 Watts Connections: 19/25mm (3/4-1") Dimensions: 70 x 142 x 109mm (2.75 x 5.6 x 4.3")
Eheim CompactON Pump 3000 EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour. The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water. When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps. In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps. With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water Eheim CompactON 3000 Pump Features Compact aquarium pump for versatile use Silent High pump performance at low power consumption Attached to the glass with durable suction cups Suitable for fresh water and marine water Specifications of the Eheim CompactON 3000 Water Pump Flow rate: 1800-3000 LPH (475-792 GPH) Max Head: 2.7 meters (8.85 Feet) Power Consumption: 55 Watts Connections: 19/25mm (3/4-1") Dimensions: 70 x 142 x 109mm (2.75 x 5.6 x 4.3")
Sicce Syncra 5.0 Water Pump The Sicce Syncra Silent: a pump line of new generation, created to pair elevated performances with extreme silence and energy saving. Thanks to their innovative technology, these pumps can be used in a great number of different applications. In fact, Syncra Silent pumps are ideal for fresh water and marine aquariums, terrariums and turtle tanks, protein skimmers, water-cooling, indoor and outdoor fountains and for any other application that requires a high performance, extremely silent pump. All the Syncra Silent line can be used with the Wet & Dry application, thanks to a thermal protection that avoids overheating. The pumps come with junctions and threaded tubing that simplifies connections.Syncra Silent: design, reliability, 100% silence, fused with Sicce's superior technology. Sicce Syncra 5.0 Features & Specifications Silent synchronous motor Rubber feet to help stop pump vibration Flow regulation helps to meet any requirement or application Includes both inflow and outflow fittings Flow Rate: 1321 GPH Power Consumption: 105 Watts (0.95A) Max Head: 12.6 feet Inlet connection size: 1" - 1.2" Outlet connection size: 0.8" - 1" Further information on the Sicce Syncra-Silent Water Pumps
Red Sea ReefRun Dual Pump Controller A smart controller for up to 2 ReefRun DC Pumps/Reefer DC Skimmer The smart controller that allows you to set to a customized daily schedule and connect both a ReefRun DC Pump and a REEFER DC Skimmer to your ReefRun Dual Controller. The controller is sold separately, enabling the hobbyists to purchase one controller for 2 devices and save significantly, while enabling you to reduce your inventory requirements. Red Sea ReefRun Dual Controller Features Connect both a ReefRun DC Pump and a REEFER DC Skimmer to your ReefRun Dual Controller. Integrate your pump into ReefBeat, allowing for customized Feed, Maintenance and Emergency mode Quick Actions. Be notified if your pump is running dry, disconnected or malfunctioning. Set a customized daily schedule with varying intensities. Run two ReefRun DC pumps with your Dual controller, and operate them as a single unit. Set your pump to operate as a wave pump for use in closed loop wave installations.
The Quiet One Pro Versions include new magnet technology for better performance while operating at cooler temperatures and lower energy consumption. In addition the pro versions also have a flow control valve built right into for ultimate flow adjustment.Features Extremely quiet operation... so quiet you'll swear it's not running. Safe for Salt or Freshwater applications. Use with all types of filters. Includes 6' cord on larger models. ECO-SAV runs cooler and generates more power with less energy consumption. Internal recirculation prevents overheating and ejects obstructing debris. Remarkable impeller technology provides combined rotors, improved shaft materials and corrosion resistant bearings. EZ access cover allows ease of maintenance of rotor, shaft and removable impellers. Innovative "cooling chambers" provide air-cooling during dry use and water-cooling in wet applications. Pre-filter Grill with Flow Control Valve in submersible applications. Flow Controls on 200,400, 800,1200,2200,3000,4000,5000 and 6000 Models. 120V/60HZ 230V/50HZ models available Specifications:Input: 1"Output: 1"0' Head: 1330GPH6' Head: 780GPHFlowchart for the Pentair Aquatics Quiet One5000 Water Pump
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 500 GPHFlow Rate at 4' Head: 310 GPHFlow Rate at 6' Head: 190 GPHFlowchart for the Danner Mag-Drive 500 Supreme Water Pump
Today, aquarium engineering offers a number of universal pumps with various outputs and shapes. The new TUNZE Silence pump combine all the advances you may request of modern and powerful universal pump for saltwater and fresh-water aquariums.In the production of these pumps, we have paid special attention to quality ensuring a low-maintenance permanent operation for many years.They have been built in keeping with the strictest international safety standards.Features/Specifications Very silent running rotor with high-performance one-part magnet - all-ceramic bearing Very low energy consumption Adjustable output In-sump or inline operation Maximum Flow: 634 GPH Energy Consumption: 30 Watts Maximum Head: 6.5 Feet
Flow chart for the Tunze Silence Pump 1073
Sicce Syncra SDC 6.0 Water Pump Sicce celebrates the success of the Syncra line with the new Syncra Smart DC Pumps to complete our existing range for an unmatched combination built on the features customers love about the Syncra line. The Sicce Syncra SDC is Better! Smarter! The new generation of Smart Syncra DC pumps are equipped with integrated intelligence systems to meet the needs of advanced recirculating applications. With programming freedom, controllability is finally coupled with power, energy efficiency, in-line or submersible use, and low heat in addition to smart technology that only Syncra can offer for a wide range of uses. The pumps are managed by an easy to use practical interface. Sicce reconfirms its leadership in the recirculating and skimmer pump markets. Sicce Syncra SDC Pump Features Simplicity - Easy to use and clean; Sicce rotor technology offers lower maintenance, with easy rotor access when needed. Versatility - Run internal or external; 190 degree turning pre-chamber allows for horizontal or vertical positioning. Quiet Operation - Polished, ceramic shaft and bearings with unmatched precision. Cooler Running - Proprietary hydraulic design, higher quality materials, and a forced internal recirculation provide less heat transfer Other Features of the Syncra SDC Pumps Excellent energy efficiency with a near perfect power factor pays for the pump in savings! New rubber feet are custom designed bumpers to protect from vibration on all sides of the pump, not just the bottom. Automatic power-off switch protects pump if it runs dry. Half the size and power consumption of the Syncra line. 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer. Sicce Syncra SDC 6.0 Specifications Voltage: 24 Volts Min/Max Power Consumption: 10-40 Watts Flow Rate: 530 - 1400 gph Head Pressure (Min/Max): 3.5' - 11.5' Inlet/Outlet Size: 1"/1" For more information, see the links tab.
Ecotech Vectra S2 Water Pump EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile DeviceAll Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery BackupBlizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible InstallationIncluded with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup. Vectra S2 Return Pump Modes Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial. Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration. Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed. Closed Loop Modes of the Ecotech Vectra S2 Pump Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours. The Vectra S2 is Mobius Compatible Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and RadionLED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger.Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expect? Our award winning customer service staff can log into your account and suggest changes for you. The Ecotech Vectra S2 is Battery Backup Compatible In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing.By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants.*Hours are estimated and will vary depending on battery life, pump mode, and other factors.** For best performance when in return pump configuration, a Vectra Battery Backup Booster is required. Check out The Vectra Pump Advantage Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons:1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist. Ecotech Vectra S2 Pump Specifications Flow Rate: 1400 GPH (5300 LPH) Wireless: Included Max Head Pressure: 11.5 feet (3.5 meters) Footprint: 3.8" x 6.5" (98.4mm x 165.4mm) Fittings: Input: 1" (25mm) / Output: .75" (19mm) Max 72W Power Supply What's Included with your Vectra S2 Water Pump 1x Vectra S2 Mobius Ready DC Pump 1x Vectra QuietDrive Driver 1x Driver Mounting Bracket 1x Power Supply 1x Input Quick Coupler 1x Output Quick Coupler 1x Driver Mounting Bracket 1x Instructional Manual
Ecotech Vectra Battery Backup Booster The Ecotech Vectra Battery Backup Booster unit boosts the 12v output to 36v to run Vectra water pumps using the Battery Backup.The same booster will be required for the QDMP40 water pumps also as they run on 36v also
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 200GPHFlow Rate at 4' Head: 125GPHFlow Rate at 6' Head: 15GPHFlowchart for the Danner Mag-Drive 250 Supreme Water Pump
Ecotech Vectra S2 Barb and Screen Kit The specialized screen included in this kit will prevent livestock or any objects from entering the intake of your pump and causing blockage or failure. The barbed fittings allow for fast and easy plumbing with soft tubing without the need for additional fittings or adapters.Intake Size: 1"Output Size: 3/4"
Eheim Universal 1048 Water Pump EHEIM universal pumps offer a large performance spectrum and a wide variety of uses. They are very reliable equipment offering exceptionally long service life. They can be used inside or out of water.The integrated prefilter, safe hose connections, a variety of connections and fixings, but above all their absolute reliability make the EHEIM universal pumps very popular. They are frequently used in a professional environment - e.g. in breeding units and in zoos.Note: This pump is not self priming. Eheim Universal 1048 Water Pump Features Large performance spectrum, developed for long service life Usage in/under water or outside the water Hermetically moulded motor guarantees guarantee complete safety Integrated prefilter - protects the impeller from any drawn in particles and ensures longer service life Inlet connectors for safe hose connection Use of smart accessories; (e.g. InstallationsSET 2) can be attached to the outlet connector A variety of fixing possibilities (mounting plate included) All models with a choice of 1,7 m. or 10 m. cable Specifications of the Eheim 1048 Universal Water Pump Pump Output: 158 gph Maximum Head: 4'11" Power Consumption: 10 W (115V) Input Size: 1/2" Output Size: 1/2" Flowchart for the Eheim Universal 1048 Water Pump
The Reef Octopus VarioS Circulation Pump features a detachable controller with mount, high quality ceramic shaft with propeller bearing to reduce wear and tear and the latest variable speed flow technology for refined control, enhanced performance, energy-efficiency and safer operations. Unlike the vast majority of circulation pumps which uses alternating current (AC), the VarioS pump boasts several key advantages over traditional AC pumps like greater energy efficiency and safer low voltage operation and produce less heat per volume of flow.Now the aquarist can have full control of the water flow through their sump, reactors, filters or closed loop systems!!!In addition to allowing the pump to run at 5 different speeds, which is pretty normal for a DC pump, the new VarioS Controller takes the pump to a new level featuring: A float switch connection, which allows you to connect a float switch (included in the box) to the controller. This is an added security feature that allows you to shut off your water pump when your sump water has reached a high or low level. In all, you don't need another module or controller to add a float switch to your system. Two different pause/feed modes that will shut off the pump for either 15 or 60 minute intervals. These come handy when you are feeding the tank or conducting regular maintenance such as a water change. And the best feature of the VarioS controller is... a 0-10v input which will allow a 3rd party controller such as Neptune System's APEX or Reef Angel to take over the pump and tell it what to do. In this mode, the new VarioS controller becomes an interface between the system controller and the pump allowing you to create intricate programs using your system controller native language. This is unprecedented controllability on a skimmer or water pump. In essence, you can use your system controller as your DC pump controller! The VarioS pump has a true slow start-up where the pump slowly ramps up from zero RPM to the full pre-set speed over a period of approximately 10 seconds.The pump and controller are connected via a waterproof 3-conductor union. The detachable controller will allow for a simple waterproof union. The volute can rotate to change the pump's output orientation in 90 degree intervals, meaning users can output water vertically (up or down) as well as horizontally.VarioS 2 Water Pump Specs Output Thread Size: 1in slip PVC Inlet Union Size: 1in slip PVC Outlet Barb Size: 1/2-3/4in Stepped Dimensions: 3.1in(W) x 5.1in(L) x 4.25in(H) Voltage: DC 24V Power Consumption: 25 watts at max power Max Flow: 792gph* Max Head Height: 13ft* *results will vary depending on aquarium setupWhat's included in the box VarioS pump Controller Float switch Power supply Output and input union for plumbing direct PVC Versatile stepped barb output fitting for flex tubing Protective intake screen.
Ecotech Vectra M2 Barb and Screen Kit The specialized screen included in this kit will prevent livestock or any objects from entering the intake of your pump and causing blockage or failure. The barbed fittings allow for fast and easy plumbing with soft tubing without the need for additional fittings or adapters.Intake Size: 1.25"Output Size: 1"
Replacement Impeller and Shaft Assembly for the Lifegard Aquatics 5000 and 6000 PRO Aquarium Pump.Please Note: This will not fit the non-pro (older) versions of the Quiet One Water Pumps. Double check impeller sizing if unsure - these impellers are 4.5" in length including the shaft.
Eheim Universal 1262 Water Pump EHEIM universal pumps offer a large performance spectrum and a wide variety of uses. They are very reliable equipment offering exceptionally long service life. They can be used inside or out of water.The integrated prefilter, safe hose connections, a variety of connections and fixings, but above all their absolute reliability make the EHEIM universal pumps very popular. They are frequently used in a professional environment - e.g. in breeding units and in zoos.Note: This pump is not self priming. Eheim Universal 1262 Water Pump Features Large performance spectrum, developed for long service life Usage in/under water or outside the water Hermetically moulded motor guarantees guarantee complete safety Integrated prefilter - protects the impeller from any drawn in particles and ensures longer service life Inlet connectors for safe hose connection Use of smart accessories; (e.g. InstallationsSET 2) can be attached to the outlet connector A variety of fixing possibilities (mounting plate included) All models with a choice of 1,7 m. or 10 m. cable Specifications of the Eheim 1262 Universal Water Pump Pump Output: 900 gph Maximum Head: 11'6" Power Consumption: 80 W (115V) Input Size: 1" Output Size: 3/4" Flowchart for the Eheim Universal 1262 Water Pump
Replacement Bushing set for the Lifegard Aquatics 2000, 3000, 4000, 5000, and 6000 PRO Aquarium Pump.Please note: This will not fit the non-pro (older) versions of the Quiet One Water Pumps.
