With clean aesthetic lines and extensive product design, Reef Brite XHO High Power LED bars provide an attractive element to enhance the beauty of any aquatic biotope. Innovation is at the core of what we do at Reef Brite. Creating stunning high quality lighting and aquatic environment solutions, Reef Brite XHO High Power LED bars encompass cutting edge LED replacement technology. Utilizing 3 watt LEDs for maximum performance and output, our XHO LED units are great replacements for T5HO or VHO lighting. These versatile units can also be used to replace any standard strip light or to create a custom lighting system. Because of their unique design and optimized reflector system,Reef Brite LED lights give off very little glare, making them a high definition light source that brings out the vibrant colored details of your aquarium. It gives observers a more enjoyable viewing experience while maintaining shimmer. The ripple or shimmer effect produced by our LED units actually mimics sunlight as it penetrates into the ocean and tropical waters. Made from extruded aluminum, Reef Brite's lightweight low profile design allows XHO LED fixtures to be installed just about anywhere, making them ideal for display tanks, aquarium sumps and refugiums.Experience Xtreme performance at an affordable price. Mix multiple units to create your own Xtreme High Output Led lighting system. Stylish black anodized housing, high performance reflector system, and assembled in the U.S.A. XHO LEDs are the professionals choice.Is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface.
Aquatic Life Hybrid LED Bracket Set (16 Inch) 16 Inch LED Bracket pair for the Aquatic Life Hybrid T5/LED Light Fixture.This bracket is ideal for mounting the AI Prime LED.Designed for narrower tanks.
Aqua Illumination HMS Power Supply Bracket The Aqua Illumination HMS Power Supply Mounting Bracket allows you to mount your power supplies out of the water and out of the way. Fully adjustable and Velcro secure, take your aquarium under the tank organization to the next level!
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish and uses a proprietary blend of LEDs in the white and blue region. Includes: Light fixture Power Supply Mounting Legs
Hygger Full Spectrum LED Aquarium Light - 32 Watt This red, blue and white light aquarium LED is super bright as it contains 5730 large LEDs. Recommended for fish tanks 12 inches to 52 inches in width. The Hygger Full Spectrum LED Aquarium Light can also support growth on low-to-mid light-level plants. Features of The Hygger Full Spectrum LED Aquarium Light Adjustable Light Bracket - The RBW light comes with 2 metal and 2 plastic mounting brackets, which are both freely extendable. You can easily install this red blue white light on most aquarium tanks, with a cover or not, with rims or rimless. The aquarium light bracket is suitable for max 24 mm thickness glass. 3 Light Color Modes - This aquarium RBW light has 3 light modes: white LEDs, blue+white+red LEDs, and red+ blue LEDs. It is very easy to change the color by pressing the second button 1 to 3 times on the controller. Color changes will make your aquarium change to 3 different wonderful views. Dimmable & Timing - You can adjust the light brightness from 100% to 10% according to your preference, with 5 levels of brightness in total. By setting the time button, you can change the light brightness from 100%/77%/55%/32%/0%. As well, on the external controller, you can set the lighting time to 3, 6, or 12 hours by pressing the third button 1 to 3 times. Durable & Warranty - The low-profile mounting bracket fish tank is light with an aluminum alloy metal shell, which has a nice feel and a fast heat dissipation rate. With high-quality LEDs, the light is energy efficient and can last up to 20,000 hours of lighting. hygger provides a 1-year warranty for this blue-white aquarium light. Hygger Full Spectrum LED Aquarium Light - 32 Watt Specifications Power AC100-240V/60Hz / DC12v Power Consumption: 32 Watts Dimensions: 46"L x 3.2"W Number of LEDs: 87 - 60 White / 18 Blue / 9 Red Lumen Output: 1770 Color Temperture 6500K Suitable Aquarium Length: 46-52" Power Cord Length: 5.0' to adapter / 1.8' to wall
AI Blade Mounting Solution - Small The Blade Hanging Kit from AI is an elegant way to suspend your light above your tank. Made of high-quality brushed aluminum in an attractive black finish and available in 3, 4, and 6 light configurations for all size Blade fixtures. The Small version is designed to allow you to hang 1-3 lights.Kit includes: 2 bars, appropriate number of Blade mounting clips and V-wires. For use with the HMS hanging kit (sold separately).
Ecotech Radion XR30 Light Shade - 4"/45 degree Tired of your lights illuminating the room and not your tank? This may be the solution for you! 3 Sided Light Spill Shade for Ecotech XR30 LED The 3 sided light shade is designed to easily attach to your Radion LED and is ideal for standard aquariums that have the lights oriented in "landscape mode" up against a wall.You can choose between a wide angle (45 degree) or narrow angle (60 degree) shade depending on your set-up. Each light shade is available in two different heights which as well that gives you the option for a larger shade height for lights that are higher above the aquarium water. XR30 45 degree 4 Inch Light Shade Features 3 sided light is ideal for "traditional set-ups". For peninsula or lights oriented 90 degrees, we would recommend the 4 sided shade (special order at this time). 45 degree shade is designed for shallower/narrower aquariums or where the lights are spaced farther apart. Made out of high temperature PLA - won't warp or bend. Slip on over existing light with cutouts for ventilation and power cord make installation easy. No significant PAR loss - possibility of a DIY set-up of reflective material on the inside of the shade. Decrease of blue light exposure in area of aquarium. Works with G5 or G6 Radion LED fixtures Dimensions: 15.7" x 8.9" x 4"
Aqua Illumination Freshwater Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Freshwater Blade LED The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors.Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group: 16x Cool White 4x Warm White 2x Red 2x Blue AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced white spectrum with highly tunable kelvin range Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):16x Cool White, 4x Warm White, 2x Blue, 2x Red Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Freshwater 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Freshwater Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Freshwater Blade LED The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors.Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group: 16x Cool White 4x Warm White 2x Red 2x Blue AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced white spectrum with highly tunable kelvin range Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):16x Cool White, 4x Warm White, 2x Blue, 2x Red Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Freshwater 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Ecotech Radion XR30 Freshwater LED Welcome to the Next Level of LED Lighting The best aquarium light should excel at two things: The first is in providing the intensity and color light that freshwater life needs to grow and thrive. The second is to accomplish the expectations of the aquarist. The G5 Radion Lineup does both. Next Level Color G5 brings speed of growth, intensity of fluorescence, and nuance of color rendition to new heights. Crafted with the best LEDs, the optimized output from next-generation HEI Optics, and more color channels, Gen 5 is in a class of its own. Beyond Peak PAR More powerful than ever before, the Radion lineup delivers more coverage per fixture. The new single cluster design and optimized optics cut hot-spot PAR by 30% and provide 35% more total output. In the aquarium, this translates to more usable light over more area, creating the widest possible ideal par from your coral. Advanced Heat Management The G5 continues to showcase Radion's sleek styling and small footprint, but is now even quieter. A completely redesigned fan and newly evolved heat sink cool the Gen 5 more efficiently, allowing the fan to run at lower speeds. Your ears will notice a difference. Mobius Control More colors mean more channels, and with Mobius, programming and controlling your G5's increased power is even easier and faster. Mobius means almost instant setup and programming. Local wireless control and programming can be accomplished with either current OS version iOS or Android smart device. Off-site WiFI control is missing from the G5 at launch but will be enabled in the near future. Once again, the Radion will set new standards for technologically advanced and innovative control. Freshwater Radion Moonlight The Generation 5 sets the mood with two dedicated low output moonlight LEDs, each on an independently controllable channel. Total Luminance of the Radion Freshwater LED Impressive performance improvements in the G5 platform come from shifting energy wasted as hot spots to total luminance. The result is a significant increase of usable in-tank light, more even coverage, and visually brighter, more pervasive light in the aquarium. This includes: A wider light spread, overall 35% more light entering the aquarium, beautiful caustics, and smoother color mixing. Features of the Freshwater G5 Radion from Ecotech ProFrom Aquaculture to the home aquarium, there is a high likelihood that the coral you know and love has been grown or "colored-up" under a generation of Radion Pros. Powerful. Flexible. Proven. Full Spectrum 8 Channels Radion Pro's Balanced LED Mix Proven Halide Spectrum and Previous Pro Spectrum Flexible Spectral Output XR30 Pro Freshwater LED Specifications Dimensions: 11.8"L x 7"L x 1.5"H (18cm x 18cm x 3.9cm) Weight: 4.5lbs (2.04 kg) Power consumption: 180 Watts Total of 94 leds 24 Warm White 48 Cool Blue 6 Photo Red 6 Green 4 Blue 4 Lime 1 White Moonlight 1 Blue Moonlight Please Note: All G5 HMS slides, rails and mounts will work with the XR30FW Pro LED light.*Offer only valid with the purchase of matching LED and limited to 1 Arm per LED (maximum 2 arms per order)
The Reflector-35 further strengthens the light beam of the best-in-class A360X and A500X for further penetration and contrast. With an easy to attach magnetic design, the reflector increases the center light intensity by up to 5x while adding a dynamic depth to your tank.This accessory is perfect for deep tanks or SPS corals with strict light requirements.Features Beam Angle: 35 degrees Coverage Area: up to 20" x 20" Recommended Mounting Height: 8-12" above water surface Up to 5 feet into water (excludes mounting height)
Upgrade your fixture with the XHO-K15 LED ADD-ON KIT for Ecotech Radion XR15 fixtures with RMS mount or hanging kit.Also works with new G5 fixtures and mounts.With a combined total of 16-3-Watt LEDs Blue and Violet region, the Reef Brite XHO-K15 add on kit will increase intensity, PAR, color and pop. great for improving coverage and eliminating dead spots in your tank.Each kit includes: 2 x Reef Brite 10-inch Blue Actinic XHOs, Reef Brite XHO-B30 brackets, 2-way connector, and power supply.The included XHOs are dimmable and can be controlled with APEX controllers (Reef Brite APEX LED interface required sold separately). They can also be controlled using the new Reef Brite Wireless Bluetooth LE controller (Sold separately) which works with Apple and Android devices.Already own a pair of Reef Brite XHO's? The Reef Brite XHO-B30 brackets are also available separately allowing you to mount two XHO units to your existing lighting set up.
Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector
Aqua Illumination HMS Mounting Rail (60 Inch) The AI HMS rail provides the backbone of the Hydra Mounting System (HMS), which is designed to provide an easy to use, adjustable tank mount solution for the Hydra TwentySix, Hydra FiftyTwo and Hydra HD LEDs.Tailor the HMS to your tank. Width, height, and even the angle of the light is able to be fine-tuned. Slide and swivel your lights to exactly where you want them, then fasten them in place to best illuminate your livestock.The HMS features a slim profile with integrated cord management to minimize visual clutter and complement the clean look of your Hydra fixtures.Mounting Rail overall dimensions: 61.5"Note: Brackets, and either/or a Double Arm Kit or a Hanging Kit is required for complete installation.
Neptune LSM Lunar LED String - 4 LED Use this string of LED in combination with your Lunar Simulation Module (LSM)When you purchase our Lunar Simulation Module you need to outfit it with a string of Lunar LEDs. This string of LED easily mounts to the inside of your canopy or onto a standard light fixture above your tank. Choose the number of LED that best suits the width of your tank.
Neptune LSM Lunar LED String - 3 LED Use this string of LED in combination with your Lunar Simulation Module (LSM)When you purchase our Lunar Simulation Module you need to outfit it with a string of Lunar LEDs. This string of LED easily mounts to the inside of your canopy or onto a standard light fixture above your tank. Choose the number of LED that best suits the width of your tank.
An extender cable for either between lights or between controller and your A360 Kessil light. Length: 6' (1.8 meters) Plug Types: 1/8" (3.5mm) stereo male phono plug to 1/8" (3.5mm) stereo female phono jack.
Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Full spectrum white is ideal for marine/reef tanks and when combined with the Actinic Blue units make an affordable lighting solution for any reef aquarium. Includes: Light fixture Power Supply Mounting Legs
Reef Brite XHO X-Series LED Dual End Bracket Do you want to add supplemental lighting to your existing LED? Using the high powered Reef Brite XHO may be the solution for you!The dual end bracket is used in conjunction with the LED Add-On Bracket (one for each existing LED) and 2 XHO Reef Brite LEDs.Each package comes with 2 end brackets.Examples:For a 24" Dual system: with one LED you would need:1 - LED Add-On Bracket1 - Dual End Bracket2 - 24" XHO Reef Brite fixturesFor a 72" Quad system: with three LEDs you would need: 3 - LED Add-On Brackets1 - Quad End Bracket4 - 72" XHO Reef Brite fixtures For ease of use a hanging kit and inline dimmer for each fixture is recommended (each sold separately)
Hygger Full Spectrum LED Aquarium Light - 16 Watt This red, blue and white light aquarium LED is super bright as it contains 5730 large LEDs. Recommended for fish tanks 12 inches to 52 inches in width. The Hygger Full Spectrum LED Aquarium Light can also support growth on low-to-mid light-level plants. Features of The Hygger Full Spectrum LED Aquarium Light Adjustable Light Bracket - The RBW light comes with 2 metal and 2 plastic mounting brackets, which are both freely extendable. You can easily install this red blue white light on most aquarium tanks, with a cover or not, with rims or rimless. The aquarium light bracket is suitable for max 24 mm thickness glass. 3 Light Color Modes - This aquarium RBW light has 3 light modes: white LEDs, blue+white+red LEDs, and red+ blue LEDs. It is very easy to change the color by pressing the second button 1 to 3 times on the controller. Color changes will make your aquarium change to 3 different wonderful views. Dimmable & Timing - You can adjust the light brightness from 100% to 10% according to your preference, with 5 levels of brightness in total. By setting the time button, you can change the light brightness from 100%/77%/55%/32%/0%. As well, on the external controller, you can set the lighting time to 3, 6, or 12 hours by pressing the third button 1 to 3 times. Durable & Warranty - The low-profile mounting bracket fish tank is light with an aluminum alloy metal shell, which has a nice feel and a fast heat dissipation rate. With high-quality LEDs, the light is energy efficient and can last up to 20,000 hours of lighting. hygger provides a 1-year warranty for this blue-white aquarium light. Hygger Full Spectrum LED Aquarium Light - 16 Watt Specifications Power AC100-240V/60Hz / DC12v Power Consumption: 16 Watts Dimensions: 22.2"L x 3.2"W Number of LEDs: 42 - 30 White / 8 Blue / 4 Red Lumen Output: 903 Color Temperture 6500K Suitable Aquarium Length: 24-30" Power Cord Length: 5.0' to adapter / 1.8' to wall
ZOOX AcroBooster LED Light Differing from lighting fixtures produced with SMT, manufacturers can only procure ready-made LED spectra from various LED chip suppliers (such as Cree, OSRAM, Bridgelux, Osram, etc.). Due to limited spectrum options, a lighting fixture's spectrum may only exhibit multiple peaks of varying intensities, rather than being crafted into a broad and continuous spectrum like natural sunlight, such as the broad peaks of Blue light and White light. ZOOX's proprietary dense chip technology enables us to achieve a seamless blue light spectrum, marking a groundbreaking advancement in the aquarium lighting industry. Our Blue Channel spectrum seamlessly covers the following wavelengths: 390nm, 420nm, 430nm, 440nm, 450nm, 460nm, 470nm, 480nm. Our White Channel spectrum seamlessly covers the following wavelengths: 360nm all the way to 740nm(NIR). Therefore, our initial aim was to pioneer the development of a comprehensive Blue and White spectrum, providing a wide and comprehensive range of wavelengths to promote optimal growth for coral and other marine organisms, thus allowing them to display more vibrant colors.Equipped with cutting-edge LED chips that replicate Wide band Marline blue and 14000K sunlight, including seamless 395-480nm to bring out true colors, enhance coral fluorescence to the fullest, and promote growth. ZOOX AcroBooster LED Summary of Features LED Chips: The latest LED chips provide optimal color mixing and permeability for coral growth. Spectrum Accuracy: Seamless UV and blue, along with the Apollo 14000K True Sun spectrum, optimize coral growth and vibrant colors. Control: With an intelligent controller featuring 6 schedules, easy access and management are possible. Gooseneck Arm: Flexible arms allow for optimal light irradiation from the desired position. Sync:Up to 99pcs AcroBooster. ZOOX AcroBooster LED Advanced LED Chips Design Features a groundbreaking design with 33 high-power LED chips integrated into a compact 18mm substrate. Advanced ceramic substrate boasts 30 times better thermal conductivity than aluminum and 10 times better than copper substrates, ensuring optimal LED performance, longevity, and durability. This new design enables seamless color mixing and the highest level of light penetration, establishing a new standard in lighting excellence. ZOOX AcroBooster LED Controller Features Reliable and Smart controller. 6 time point schedule. Preset Spectrum for SPS and LPS. Preset Schedule for optimal Grow or Coloration . Reliable wire controller to sync up multiple units. Thermal protection. ZOOX AcroBooster LED Specifications Number of LEDs: 33 Power Consumption: 65W +/- 10% Dimensions of LED: 100 x 100 x 36.4mm (3.94" x 3.94" x 1.43") Surface Area Coverage: 30 - 60cm (12 - 24") Flexible Arm included
Ecotech Radion XR30 Light Shade - 5"/45 degree Tired of your lights illuminating the room and not your tank? This may be the solution for you! 3 Sided Light Spill Shade for Ecotech XR30 LED The 3 sided light shade is designed to easily attach to your Radion LED and is ideal for standard aquariums that have the lights oriented in "landscape mode" up against a wall.You can choose between a wide angle (45 degree) or narrow angle (60 degree) shade depending on your set-up. Each light shade is available in two different heights which as well that gives you the option for a larger shade height for lights that are higher above the aquarium water. XR30 45 degree 5 Inch Light Shade Features 3 sided light is ideal for "traditional set-ups". For peninsula or lights oriented 90 degrees, we would recommend the 4 sided shade (special order at this time). 45 degree shade is designed for shallower/narrower aquariums or where the lights are spaced farther apart. Made out of high temperature PLA - won't warp or bend. Slip on over existing light with cutouts for ventilation and power cord make installation easy. No significant PAR loss - possibility of a DIY set-up of reflective material on the inside of the shade. Decrease of blue light exposure in area of aquarium. Works with G5 or G6 Radion LED fixtures Dimensions: 17.5" x 9.8" x 5"
Aqua Illumination Freshwater Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Freshwater Blade LED The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors.Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group: 16x Cool White 4x Warm White 2x Red 2x Blue AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced white spectrum with highly tunable kelvin range Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):16x Cool White, 4x Warm White, 2x Blue, 2x Red Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Freshwater 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Coral Glow Blade LED This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots. Choose your color with the AI Coral Glow Blade LED The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow.Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers.The Blade Coral Glow includes the following 24 diodes per cluster group: 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm AI Blade LED features Available in 7 different sizes from 12 to 66 inches Balanced spectrum optimized for coral fluorescence Mounting solutions for every tank need Cluster group LED diodes with 95 degree spread EdgeField Optics with even PAR and smooth color mixing Minimal shadowing and natural shimmer Great alone, stacked in parallel, or as supplemental fill lighting IP66 Water Resistance Passive, noiseless cooling Smart control via myAI or Mobius apps Low profile Tank Rest included or Mounting Clips included Several different ways to mount your AI Blade The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up. Tank Rest - Included with all Blade lights up to 39", this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture. Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails. Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest. Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics. Hybrid Mount - A mounting solution designed to combine Blade strips with one or more AquaIllumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one! Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities. Easily Control Your AI Blade LED with Mobius or MyAI The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAi or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums. AI Blade Specifications Dimensions: 2.8" W x 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths* LEDs (per cluster):12x Royal Blue 6x 430nm 3x 415nm 3x 405nm Power Consumption: 20-140W at full power (model dependent) Universal Input Range: 100-240V AC / 50-60Hz Cable Length: 9.8' (3m) PSU Regulatory Compliance: UL, CE, & RoHS Water Resistance: IP66 Rated *tank rest adds up to 9 additional inches in length What's Included with your New AI Blade? 1x AI Blade Coral Glow 1x Power Adapter 1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Ecotech Radion XR15 Pro G6 Upgrade Kit Upgrade Kit to turn your existing G5 XR15 Pro (or Blue) into a XR15 G6 Pro led light.Radion G6 models are built on the same heat sink and driver platform as the equivalent Radion G5 models (XR15 or XR30). Excitingly this allows for a same model (XR15 and XR30) upgrade path for G5 to G6. Included in the upgrade kit is the G6 cluster and HEI lens - which together combine to create the Hybrid Hemispherically Edge Illuminating (HEI2) lens system. See documents tab for installation instructions.
The A500X is a powerful 185W high intensity LED designed specifically for experienced SPS coral growers. This fixture integrates the latest Dense Matrix LED technology with the proprietary Kessil Logic, and delivers a concentrated light with well blended spectrum for optimum SPS coral growth, health, and coloration.The beam of this flagship A500X can be adjusted with optional 35 and 55 degree reflectors and allow SPS corals to thrive in a variety of environments.Higher Photon Volume DensityThe A500X has a low profile design with higher light output, thanks to the redesigned, first-class sunflower heat sink.Advanced Color ControlThe A500X has more color control, opening unlimited color combinations for aesthetics while maintaining the performance of the core spectrum.Low Dimming & Improved TransitioningThe A500X features smoother color transitioning and dimming, including moonlight effect.Smarter CommunicationThe new K-Link communication method is an upgrade of the easily plug & play 0-10V, allowing users to network multiple A360X together and set individual groups to run their own programs.Light Shaping CapabilityThe A500X can be used with optical accessories to shape light, allowing users to modify the look of the aquarium to their liking.CoverageThe newly designed optics along with the latest generation Dense Matrix LED array provide a broader delivery of light and eliminate shading. Ideal for SPS dominant systems cover up to 36" x 36" of aquarium surface.SpectrumThe well-known Tuna Blue spectrum has been proven by its users to promote coral growth and enhance coloration. With Kessil Logic, it ensures consistent power output and coral growth across the tunable spectrum.ShimmerThe Kessil shimmer effect gives your tank a beautiful, natural, sunlit look comparable to the shimmer of a Metal Halide fixture. It is like replicating your own piece of the ocean.PenetrationPatented Dense Matrix LED technology concentrates multiple LED chips into a single array, creating a powerful and penetrating light source with wide coverage. The maximum penetration can reach 24" to 30" beyond the water's surface for most reefs. Penetration can be further enhanced by using the narrow or 35 reflector (optional accessories).Color MixingDifferent wavelengths are seamlessly blended within a single LED array, emitting uniform color across the coverage range.Specifications Dimensions: 3.7" x 5.2" / 9.4cm x 13.3cm Unit Weight: 1.72lb / 0.78kg Spectrum: Tuna Blue + Red + Green + Purple (Violet + Indigo) Power Adapter 100-240V AC (input) 48V DC (output) Power Consumption 185W max Mounts with the included Hanging Ring or A-Series Gooseneck or Mounting Arm (both sold separately). What's In The Box 1x A500X 1x Power Adapter 1x AC Adapter Cable 1 x Hanging Ring 2x Metal Screw Hook 2x Hanging Bracket 1x Reflector 55
Reef Brite® is excited to announce the new K-series LED ADD-ON KIT Brackets for Ecotech Radion® AI Hydra® fixtures with RMS and HMS™ mounts. Also works with new G5 fixtures and mounts. The K-Series LED ADD-ON Brackets allow users to attach a pair of XHO’s (Not included) to Ecotech Radion® AI Hydra® fixtures with RMS and HMS™ mounts to help increase intensity, PAR, color and pop while improving coverage and illuminating dead spots and shadow areas in your tank. Each kit includes two Reef Brite XHO-B30 Brackets. Important please read all instructions carefully before installing your K-series LED ADD-ON brackets: Reef Brite has gone through great care to ensure that the K-series LED ADD-ON Brackets install seamlessly to your fixture or lighting system. Due to various tank sizes/glass thicknesses and older style mounts offered, before installing it is very important that you check your tank manufacturers specs as well as checking the mount you are using to ensure that it is compatible and can support the additional weight. Reef Brite will not be responsible for improperly installed kits or any damages that may result. Installation instructions for RMS and HMS™ mounts: When working near or around your aquarium make sure all working surfaces are completely dry before handling any electrical equipment. Make sure your fixture is unplugged from electrical outlet and disconnected from the power supply before attempting to install the K-Series LED ADD-ON Brackets. If fixture was in use even for just a short period let cool. LED’s can get very hot during operation and can cause personal injury or damage surfaces if proper care in handling is not taken. Once cool, place fixture on a secure table or work surface. XR series locate the four M5 x 12mm mounting screws included with your K-Series LED ADD-ON brackets. Hydra HD series locate the two M5 x 25mm screws that came with your K-Series LED ADD-ON brackets. These screws are required to install the K-Series LED ADD-ON Brackets. Do not attempt to use hardware not supplied with your K-Series LED ADD-ON Brackets as damage to your fixture could result. Attach the two brackets that came with your K-Series LED ADD-ON Brackets by placing them under the RMS or HMS™ mount you are using for your XR or Hydra HD series light so that the holes align with the RMS or HMS™ mount and the threaded holes on your fixture. Using the provided hardware attach the brackets and mount to the fixture. It is recommended to use care when threading the screws and avoid overtightening the screws once installed. Install the two XHO’s (Not included) with the screws originally provided on the ends of your XHO’s. Make sure to locate the power supplies for your XHO’s (Not included) in a safe location away from any contact with water. Carefully attach your fixture to the aquarium mount, plug in fixture and power supply to a GFI outlet (Recommended) assuring a proper drip loop is employed. Important note: Use of power strips located on floors or any location where water can come in direct contact with them is dangerous and can cause serious injury or fire. Make sure all electrical plugs and electrical outlets are safely located so that water cannot splash or spill on them. Installation instructions for hanging kits: When working around water make sure all working surfaces are completely dry before handling any electrical equipment. Make sure your fixture is unplugged from electrical outlet and disconnected from the power supply before attempting to install the K-series LED ADD-ON Brackets. If fixture was in use even for just a short period let cool. LED’s can get very hot during operation and can cause personal injury or damage surfaces if proper care in handling is not taken. Attach the two brackets that came with your K-Series LED ADD-ON Brackets by placing them over the top of the fixture, so that the holes in the K-Series LED ADD-ON Brackets align with the threaded holes on your fixture. HD series the posts that comes with your hanging kit go through the center hole on the bracket to attach brackets to your fixture. The K-Series LED ADD-ON Brackets are designed so that the posts for the hanging kit keep the brackets secured in place. Using the supplied hardware that came with your hanging kit attach the hanging kit and brackets to your fixture. Do not attempt to use hardware not supplied with your hanging kit or K-Series LED ADD-ON Brackets as damage to your fixture could result. Install the two XHO’s (Not included) with the screws originally provided on the ends of the XHO’s. Make sure to locate the power supply for the XHO’s (Not included) in a safe location away from any contact with water. Carefully attach your fixture to the hanging cables, plug in fixture and power supply to a GFI outlet (Recommended) assuring a proper drip loop is employed. Important note: Use of power strips located on floors or any location where water can come in direct contact with them is dangerous and can cause serious injury or fire. Make sure all electrical plugs and electrical outlets are safely located so that water cannot splash or spill on them. IMPORTANT NOTICE: When installing any lighting product, power supply, or controller do not install in a manner that will allow any part or component to come in direct contact with water. Reef Brite assumes no liability for incorrectly installed products.
The ReefLED Universal mounting arms attach firmly onto the rear wall of the tank and can be rotated to the upright position during reefscaping or other tank maintenance.Set at the correct height above the aquarium, the mount arm can be adjusted to suit tank widths from 57-80cm (22.5-32") and with glass thickness of 8-19mm (5/16 - 3/4").
Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Actinic Blue promotes growth and is perfect for bring out vibrant fluorescence making your corals pop with color. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector
Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector
Measuring less than 0.5 inches high and 2.4 inches wide, the Reef Brite LumiLite Pro looks as great as it performs. Featuring a high power COB LEDs, the LumiLite Pro promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite Pro is available in a wide variety of configurations to suit marine/reef and freshwater applications.Available in 50/50, Actinic, and Plantlyte, The LumiLite Pro offers two independent channels, includes 2 in-line dimmers, a Y-connector, power supply, mounting legs, and is compatible with popular LED timers using the cable adapter kit (sold separately).Designed and built in the U.S the LumiLite Pro series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish. Great for freshwater, marine and reef tanks, the 50/50 duo enables users to adjust the white and blue channels independently with the included inline dimmers. Each light Includes: Light fixture Power Supply Mounting Legs 2 - In-Line Dimmers Y Connector
Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The 50/50 is ideal for aquarist who want to bring out colors in their corals and fish and uses a proprietary blend of LEDs in the white and blue region. Includes: Light fixture Power Supply Mounting Legs
Aquatic Life Hybrid 16/18 Inch LED Bracket - 2.5 Inch Opening LED Mounting bracket for use with the Aquatic Life Hybrid LED/T5 Fixtures.This bracket is ideal for mounting Kessil A160 Fixtures.For use with the 16 or 18" set-up.
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
Neptune LSM Lunar LED String - 5 LED Use this string of LED in combination with your Lunar Simulation Module (LSM)When you purchase our Lunar Simulation Module you need to outfit it with a string of Lunar LEDs. This string of LED easily mounts to the inside of your canopy or onto a standard light fixture above your tank. Choose the number of LED that best suits the width of your tank.
The Red Sea ReefLED 90 Pendants allow multiple ReefLED 90 Fixtures to be hung, giving an elegant look above your peninsula or classic aquarium.The Pendants are available in black or white, and have 4 model lengths suitable for 30" to 72" long aquariums.ReefLED lights sold separately.
Measuring less than 0.5 inches high and 1.25 inches wide, the Reef Brite LumiLite looks as great as it performs. Featuring a high power LED array, the LumiLite promotes growth while enhancing color in corals, invertebrates and fish. The LumiLite is available in a wide variety of configurations to suit marine/reef and freshwater applications.Featuring 50/50, Actinic, Plantlyte, and Full Spectrum White, The LumiLite includes power supply, mounting legs, and is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface. Designed and built in the U.S the LumiLite series offers an affordable solution to aquariums with light demanding organisms, or tanks with limited room that need a bright source of light in a convenient compact package.The Blue Actinic series is a multi-spectrum unit ideal for aquarist looking for amazing colors and growth, fluorescence, or pop in their corals and other photosynthetic invertebrates. Includes: Light fixture Power Supply Mounting Legs
Reef Brite XHO X-Series LED Quad End Bracket Do you want to add supplemental lighting to your existing LED? Using the high powered Reef Brite XHO may be the solution for you!The quad end bracket is used in conjunction with the LED Add-On Bracket (one for each existing LED) and 4 XHO Reef Brite LEDs.Each package comes with 2 end brackets.Examples:For a 24" Dual system: with one LED you would need:1 - LED Add-On Bracket1 - Dual End Bracket2 - 24" XHO Reef Brite fixturesFor a 72" Quad system: with three LEDs you would need: 3 - LED Add-On Brackets1 - Quad End Bracket4 - 72" XHO Reef Brite fixtures For ease of use a hanging kit and inline dimmer for each fixture is recommended (each sold separately)
Hygger Full Spectrum Clip-On LED Aquarium Light - 18 Watt The hygger 018 clip-on light can be used for various planted tanks from approximately 11 to 55 inches long. It's easy to install with the clip-style bracket on a normal rimmed aquarium, and comes in a variety of sizes to meet the different lengths of fish tanks. Besides full spectrum lighting, it also has a Day-Night dual timer that includes Sunrise/Day and Sunset/Moon, adjustable cycles with 9 colors for a planted tanks. Thicker aluminum increases the heat dissipation efficiency. The light also includes a detachable power supply, so there is no need to replace the whole light if it is damaged. Features of The Hygger Full Spectrum Clip-On LED Aquarium Light 4 Modes to Choose From 1. Daylight Lighting Mode: 3-time options 6H/10H/12H, the color simulates sunrise sunset (gradient orange - full-spectrum white light - gradient orange). The Daylight color can not be selected to set. 2. Moonlight Lighting Mode: There are 7 color options in moonlight mode. 3 Time(3H/5H/12H) + 6 brightness(10%-25%-35%-50%-75%-100%) + 7 colors (red, orange, yellow, green, cyan, blue, purple) 4. Manual Mode. Splicing Use - The biggest feature of the hygger clip-on light is that it can be spliced and used for extra-long fish tanks. 14W+42W=be used for tanks up to 60in long; 22W+26W=be used for tanks up to 60in long. The light in the tank's middle can also be adjusted back and forth through the extendable rod. It is easy to maintain. 5 Rows of LEDs - Using high-quality 2835 + 5050 model lamp leds that have a long service life of at least 50,000 hours. The full spectrum lighting is soft, and the color rendering index(CRI) is close to natural light, which protects your eyes and fish. Hygger Full Spectrum Clip-On 18 Watt LED Aquarium Light Specifications Power: AC100-240V / DC20V Power Consumption: 18 Watts Number of LEDs: 90 Light Length: 16.7" (42cm) Suitable Aquarium Length: 19-25" Power Cord Length: 4.9' (to adapater) + 2.3' to wall. Number of Brackets: 1
Hygger Full Spectrum LED Aquarium Light - 25 Watt This red, blue and white light aquarium LED is super bright as it contains 5730 large LEDs. Recommended for fish tanks 12 inches to 52 inches in width. The Hygger Full Spectrum LED Aquarium Light can also support growth on low-to-mid light-level plants. Features of The Hygger Full Spectrum LED Aquarium Light Adjustable Light Bracket - The RBW light comes with 2 metal and 2 plastic mounting brackets, which are both freely extendable. You can easily install this red blue white light on most aquarium tanks, with a cover or not, with rims or rimless. The aquarium light bracket is suitable for max 24 mm thickness glass. 3 Light Color Modes - This aquarium RBW light has 3 light modes: white LEDs, blue+white+red LEDs, and red+ blue LEDs. It is very easy to change the color by pressing the second button 1 to 3 times on the controller. Color changes will make your aquarium change to 3 different wonderful views. Dimmable & Timing - You can adjust the light brightness from 100% to 10% according to your preference, with 5 levels of brightness in total. By setting the time button, you can change the light brightness from 100%/77%/55%/32%/0%. As well, on the external controller, you can set the lighting time to 3, 6, or 12 hours by pressing the third button 1 to 3 times. Durable & Warranty - The low-profile mounting bracket fish tank is light with an aluminum alloy metal shell, which has a nice feel and a fast heat dissipation rate. With high-quality LEDs, the light is energy efficient and can last up to 20,000 hours of lighting. hygger provides a 1-year warranty for this blue-white aquarium light. Hygger Full Spectrum LED Aquarium Light - 25 Watt Specifications Power AC100-240V/60Hz / DC12v Power Consumption: 25 Watts Dimensions: 35.6"L x 3.2"W Number of LEDs: 75 - 54 White / 14 Blue / 7 Red Lumen Output: 1567 Color Temperture 6500K Suitable Aquarium Length: 36-46" Power Cord Length: 5.0' to adapter / 1.8' to wall
Ecotech Radion XR15 Light Shade - 5"/60 degree Tired of your lights illuminating the room and not your tank? This may be the solution for you! 3 Sided Light Spill Shade for Ecotech XR15 LED The 3 sided light shade is designed to easily attach to your Radion LED and is ideal for standard aquariums that have the lights oriented in "landscape mode" up against a wall.You can choose between a wide angle (45 degree) or narrow angle (60 degree) shade depending on your set-up. Each light shade is available in two different heights which as well that gives you the option for a larger shade height for lights that are higher above the aquarium water. XR15 60 degree 5 Inch Light Shade Features 3 sided light is ideal for "traditional set-ups". For peninsula or lights oriented 90 degrees, we would recommend the 4 sided shade (special order at this time). 60 degree shade is designed for deeper aquariums or where you want higher intensity. Made out of high temperature PLA - won't warp or bend. Slip on over existing light with cutouts for ventilation and power cord make installation easy. No significant PAR loss - possibility of a DIY set-up of reflective material on the inside of the shade. Decrease of blue light exposure in area of aquarium. Works with G5 or G6 Radion LED fixtures Dimensions: 11.3" x 9.2" x 5"
