RO Accessories

Attaches easily to most standard kitchen faucets.Not recommended for spray or specialty sink hardware.Comes complete with divertor.

Read more less

AquaticLife TDS Tester Pen Features of the AquaticLife TDS Water Tester Handheld model is ideal for portability and testing water from multiple sources. Advanced microprocessor technology provides accurate readings. Hold function saves measurement for convenient reading and recording. Battery life is approximately 1000 hours of usage and power source is 2 x 1.5V included button cell batteries (LR44 size). Auto-off function saves battery life by turning off the meter shuts automatically after five minutes of non-use. Large, easy-to-read LCD screen makes it easy to see results. AquaticLife TDS Meter Specifications Measurement Range: 0-999ppm Increments: 1ppm Accuracy: +/- 2%

Read more less

The Eshopps float Valve can be either hung on the side of a sump or attached directly through a drilled hole in the side of your sump. The hand crafted acrylic hang-on frame allows for easy adjustment of the water level. The small compact float valve allows for placement in tight locations. Includes 7ft of 1/4" -? white tubing.

Read more less

Aquatic Life Float Valve Kit. Allows you to fill large tanks, containers, and aquariums automatically. If you are using this with a reverse osmosis or RO/DI system, you WILL NOT need any other components, as this kit includes the necessary auto shut-off valve, check valve and tubing.The adjustable float is threaded with a 1/2" MPT connection and attaches to standard 1/4" Reverse Osmosis tubing using the included 1/2" FPT to Press-Fit adapter.The Aquatic Life Float Valve Kit allows you to fill large tanks, containers, and aquariums automatically - Connects Directly to Faucet - Includes check valve. Minimum Operating Pressure: 40 PSI - Maximum Operating Pressure: 80 PSI.

Read more less

The IceCap Dual Stage DI systems are designed to effectively treat filtered water before using it in your aquarium. The Dual DI stage filter helps remove excessive amounts of TDS and contaminants like ammonia, phosphates, nitrates, silicates, etc. The color will change from blue to brown as the DI media is exhausted.Specifications Uses Standard 10in Canisters, Cartridges & 1/4" Push-Connect Fittings Dimensions (LxWxH): 10.5 x 5 x 14.25in Limited Warranty: 1 year (does NOT include filters) What's Included Two durable clear canisters Refillable DI cartridge with high-capacity color changing resin All-in-one universal filter wrench to tighten & loosen canisters Polyethylene installation tubing

Read more less

Inline Faucet Supply Adapter for RO Units 1/2" Female Thread x 1/2" Male Thread x 1/4" quick disconnect fitting. Attaches to your faucet or toilet supply valve. Excellent for permanent connections of your RO/DI system to source water. Handy flow valve regulatory included.

Read more less

RO Drain Saddle Use this drain saddle to connect your waste line off your reverse osmosis system to your drain pipe.Perfect for eliminating the waste water hose running into your sink.

Read more less

Membrane Flush KitThis device allows the water to pass over the membrane, bypassing the flow restrictor, giving the membrane surface a flushing cleaning of collected surface debris.Flushing the TFC membrane regularly helps to extend its life by 6-12 months.This product is specifically designed for use with AquaFX R/O Units.

Read more less

The IceCap Magnetic Mount Float Valve can be either hung on the side of a sump or any container without the need to drill a hole. The IceCap Magnetic Mount Float Valve comes with universal tubing retainer and tubing

Read more less

Aquatic Life Buddie Faucet Adapter Easily plumb and customize your RO/DI System with Buddie Fit connectors, valves and more! DESIGNED FOR 1/4 -INCH TUBING - The hose bib connectors are designed to easily connect to any standard garden hose type faucet and then connect to a flexible 1/4" OD tubing. EASY TO INSTALL - You connect the garden hose faucet to the Female Garden Hose Bib connection on one end and then insert the 1/4" tubing 5/8" into the press fit connection on the other end. PROVIDES A LEAK-PROOF CONNECTION - The quick connect hose bib provides a permanent/removable leak-proof connection. It comes with a blue retaining clip to keep the tubing secure. FITS MOST GARDEN HOSE TYPE FAUCETS - The garden hose faucet connector attachments will fit onto most standard outdoor yard faucets and most washing machine water faucets. EACH PACK INCLUDES - Each pack includes Two plastic hose bib connectors, two washers and two blue retainer clips. The blue collars lock the connector so that the tubing cannot be removed.

Read more less

Aquatic Life Reverse Osmosis Pressure Gauge The Aquatic Life Reverse Osmosis Pressure Gauge w/Press-Fit Tee Connectors 1-150 PSI. Sufficient PSI is essential for the correct operation of a reverse osmosis unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops readily visible which can tell you that sediment and carbon blocks need to be changed.The pressure gauge comes assembled with 1/4" quick connect fittings for quick easy in-line installation.This item is designed for use with most aquarium RO systems.

Read more less

AquaticLife RO Booster Pump Increase the effectiveness of your RO system, and REDUCE waste water by up to 65%! Reverse osmosis booster pumps are used to increase the pressure going into your RO or RO/DI system which make it operate more efficiently and can decrease consumption of DI resin. Designed as an accessory for Reverse Osmosis units in areas with low water pressure, or for users that want maximum output and the best quality filtered water from their RO systems.The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure--down to 35 psi--but the reality is you won't get a lot of water and the product water quality may be compromised if the unit runs below 45 psi.RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher. The increased pressure will also improve the economy of the unit (it will run less reject water) as well as the quality of the water. RO units thrive on pressure! Features of the Aquatic Life Smart Buddie Booster Pump Increases the Pressure - Reverse osmosis booster pumps are used to increase the pressure going into your RO or RO/DI system which makes it operate more efficiently, improves the economy of the unit, and water production. Maximizes Effectivness - Increase the effectiveness of your unit, this booster pump for reverse osmosis water systems can reduce waste water by up to 65%. It can also help decrease resin consumption and increase membrane life. Easy to Install - Buddie Fit press-fittings make it easy to plumb the tubing into the existing RO system. The increased pressure can significantly increase water output and your unit will run even better with the pressure boosted to 80 psi or higher. Tubing & Elbows Included - Six low-profile 90 degree elbows are included to simplify plumbing and also allow connection to the AquaticLife Twist-In RO/DI units. Blue, Yellow and Red tubing is included for convenient installation. Works with 50-100 GPD RO/DI Units - Smart Buddie universal booster pump works with 50 to 100 GPD RO and RO/DI units including the RO Buddie, Classic RO/DI, Twist-In RO/DI, APEC, LiquaGen, SpectraPure, and more. Now Includes Internal Check Valve Smart Buddie Booster Pumps are water tested at the factory prior to packaging.

Read more less

Aquatic Life Faucet Adapter Kit Three-piece faucet adapter set takes the guesswork out of connecting a garden hose, aquarium gravel vacuum or reverse osmosis unit to your sink.Adapters thread onto common kitchen and bathroom faucets and convert the faucet to a male garden hose thread. Plastic hose bib adapter converts garden hose thread to 1/4" tubing connector.Simply thread onto the garden hose adapter or spigot and then insert your own 1/4" tubing into the other end of the adapter. Just remove the aerator on your bathroom or kitchen faucet to use these adapters.Each set includes connections for Male M22 & M24, Female M24, Male Garden Hose and Female Garden Hose.Adapters include easy-to-hold areas to make threading onto a faucet easier.

Read more less

Aquatic Life Flush Valve Assembly The flush valve assembly is designed to flush the membrane and clear any debris that may have been built-up on the membrane.Doing this on a regular basis will prolong the life of the membrane. To flush your membrane, simply open the valve and allow the water to bypass the Flow Restrictor. This will allow the water to flow quickly around the outside of your membrane and help sweep away any build-up.Flush the membrane for 30-45 seconds prior to each time you use the RO unit.

Read more less