Replacement power supply for the VorTech MP40QD.Manufacturer Part Number: MP007-USPlease note: This power supply unit is for the QD Versions of the Vortech MP40 only.The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Tunze Nanostream 6055 Replacement Power Supply - 6095.240
Overview
Replace a lost or tired brick with the 6095.240 100–240 V global power supply for Nanostream 6055, 6095, and Stream 3 pumps. Auto-sensing electronics deliver clean 24 V DC for peak pump performance.
Features
Wide-range 100–240 V AC input for worldwide use
Outputs stabilized 24 V DC at 2 A
Inline barrel connector fits Tunze driver cables
Short-circuit and over-temp protection
Specifications
Input: 100–240 V 50/60 Hz
Output: 24 V DC 2 A
Cable length: 1.8 m
What's Included
Power Supply 6095.240
Ecotech Vectra L2 Water Pump
Overview
EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile Device
All Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery Backup
Blizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible Installation
Included with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup.
Vectra L2 Return Pump Modes
Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial.
Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.
Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed.
Closed Loop Modes Pump
Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours.Vectra L2 is Mobius Compatible
Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and Radion LED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger. Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expectOur award winning customer service staff can log into your account and suggest changes for you.
is Battery Backup Compatible
In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing. By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. *Hours are estimated and will vary depending on battery life, pump mode, and other factors.*For best performance when in return pump configuration, a Vectra Battery Backup Booster is required.
Check out Vectra Pump Advantage
Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons: 1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate. When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
SpecificationsFlow Rate: 3100 GPH (12400 LPH) Wireless: IncludedMax Head Pressure: 21.5 feet (6.5 meters) Footprint: 5" x 8.5" (113.5mm x 192.6mm) Fittings: Input: 1.5" (38mm) / Output: 1.25" (31.75mm) Max 150W Power SupplyWhat's Included
1x Vectra L2 Mobius Ready DC Pump
1x Vectra QuietDrive Driver
1x Driver Mounting Bracket
1x Power Supply
1x Input Quick Coupler
1x Output Quick Coupler
1x Driver Mounting Bracket
1x Instructional Manual
Hygger Double Aquarium Powerhead - 2 x 2100 GPH
Overview
The Hygger double-head wave maker for aquariums has all the double effects, it can make waves longer and more powerful.
The horizontal wide-angle surface is wider, and the water wave can reach the surrounding area in a wide range.
The maker can be widely used for 40 - 240 gallons of fish tanks.
Features
Enhanced Stability - The circulation pump features a combination of suction cups and a large magnet base, ensuring a secure and stable attachment to the fish tank wall. This design minimizes movement and enhances overall stability.
Water Circulation & Dissolved Oxygen - When installed at the top of the tank, the pump generates noticeable water ripples, which significantly increase dissolved oxygen levels. This enhanced circulation helps balance water temperature more quickly, especially in larger tanks with heaters. Additionally, it promotes a steady water flow, forming a water cycle that contributes to stable water quality.
BenefitsPositioning the pump in the middle of the tank helps disperse bubbles from the air stone, improving water clarity. The current created encourages fish to swim against the flow, promoting exercise and a stronger appetite. A stronger water flow can also contribute to better overall fish health.
Assisting in Fish Feeding - Placing the pump at the bottom of the tank helps move filter material and assist in clearing away fish feces and food. The circulating water flow generated by the pump aids in directing waste and food particles, ensuring a cleaner environment. The pump's OFF function allows you to pause operation without disrupting fish feeding.
Specifications
Power Consumption: 12 Watts (110/120v 60Hz)
Flow Rate: 2 x 2100 GPH (2 x 10000 LPH) Recommended Aquarium Size: 110 - 240 Gallons
Maximum Glass Thickness: 0.47" (12mm)
Hiblow 60/80 Magnetic Rod Block
Hiblow Magnetic Rod Black
Overview
Manufacturer Part Number: 80PR000041P
Genuine Hiblow replacement part for the Hiblow 60 and Hiblow 80 air pumps.
Replacement power supply for the VorTech MP10QD.Manufacturer Part Number: MP150-USThe Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Sicce Syncra SDC 9.0 WiFi Controllable Water Pump
Overview
Sicce celebrates the success of the Syncra line with the new Syncra Smart DC Pumps to complete our existing range for an unmatched combination built on the features customers love about the Syncra line.
is Better! Smarter!
The new generation of Smart Syncra DC pumps are equipped with integrated intelligence systems to meet the needs of advanced recirculating applications. With programming freedom, controllability is finally coupled with power, energy efficiency, in-line or submersible use, and low heat in addition to smart technology that only Syncra can offer for a wide range of uses. The pumps are managed by an easy to use practical interface. Sicce reconfirms its leadership in the recirculating and skimmer pump markets.
Features
Simplicity - Easy to use and clean; Sicce rotor technology offers lower maintenance, with easy rotor access when needed.
Versatility - Run internal or external; 190 degree turning pre-chamber allows for horizontal or vertical positioning.
Quiet Operation - Polished, ceramic shaft and bearings with unmatched precision.
Cooler Running - Proprietary hydraulic design, higher quality materials, and a forced internal recirculation provide less heat transfer
FeaturesExcellent energy efficiency with a near perfect power factor pays for the pump in savings! New rubber feet are custom designed bumpers to protect from vibration on all sides of the pump, not just the bottom. Automatic power-off switch protects pump if it runs dry. Half the size and power consumption of the Syncra line. 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer.Specifications
Voltage: 24 Volts
Min/Max Power Consumption: 30-95 Watts
Flow Rate: 530 - 2500 gph
Head Pressure (Min/Max): 8.5' - 23.0'
Inlet/Outlet Size: 1"/1"
For more information, see the links tab.
Hygger Piezoelectric Ceramic Air Pump - White
Overview
Unlike traditional air pumps, the Hygger mini air pump for aquariums is driven by a thin piezoelectric ceramic plate and has no motor or other mechanical equipment.
It is very quiet and fit for fish tanks or fish bowls placed in bedrooms, living rooms, and offices.
It only uses 1.5-watt power consumption and has an air flow rate of 420 ml/min
Specifications
Model Number: HG811-White
Dimensions: 2.4" x 2.4" x 0.8"H Power Consumption: 1.5 Watts
Max Air Flow Rate: 420ml/min
Noise Level: Less than 35db
Air Pressure: 12KPa
Airstone, silicone tubing and suction cup included.
Note: Air Pump is not submersible - Keep in safe dry place!
Hygger Mini Air Pump - 2 Watt
Overview
The Hygger fish tank oxygen pump is smaller but stronger in power. It doesn't take up space around aquariums. For small community fish tanks, you can use one air pump to supply sufficient oxygen for pet fish.
Features
Adjust Oxygen Output - The oxygen output can be adjusted manually. You can adjust the appropriate oxygen output by yourself according to the number and the characteristics of the fish, which is more beneficial to the aquarium inhabitants.
Quiet Operation - Although it has great power it has a small noise. The Hygger fish tank air pump greatly reduces the noise by using four raised rubber feet to isolate the transmission path of the noise while the thickened ABS plastic seal effectively isolates noise, achieving a more ideal mute effect for household use.
2W Single Air Pump - This mini sized air pump without accessories is single outlet air pump, if you already have air stones, hoses, and check valves, and your fish tank height does not exceed 2.6ft, then you can choose this air pump model.
Specifications
Model Number: HG037-2W
Power Consumption: 2 Watts
Maximum Air Flow: 1.5L/Min
Sound Level: 45db or Less
Air Pressure: 0.022Mpa
Number of Outlets: 1
Maximum Depth: 2.6 feet (79cm)
Cord Length: 5.9 feet (1.7M)
Aquatop Forza Slim Wavemaker DC Pump - 3434GPH
Overview
Aquatop's DC Wave Maker Pumps are powerful, highly efficient direct current wave making pumps that move and draw water in a unique way. The Prop-Style Impeller and 360 degree uniform water draw create a wider distribution of flow when compared to traditional powerheads. The Aquatop DC Wave Maker Pumps also include a strong, secure magnet mounting system which allows for flexible placement. Each model runs quietly and efficiently, with 6 wave modes and 20 flow rates for precise control. Two units can be synchronized wirelessly for enhanced water movement and circulation throughout your aquarium. The controller can even detect when the room is dark and automatically enter night mode. The Aquatop DCSW-3434 DC Wave Maker Pump operates on just 20-watts of DC power to move as much as 3,434-gph. It is best suited to tanks from 50 to 200 gallons.
Features
SMART LED CONTROLLER with 6 different wave modes and 20 different flow rate settings
FEEDING PAUSE SETTING provides a 10-minute flow pause
AUTOMATIC NIGHT MODE detects darkness and slows pump until daylight, if selected
SUPER QUIET operation and saves energy compared to AC pumps
POWERFUL MAGNETIC MOUNT keeps pumps where you put them
LINK 2 PUMPS WIRELESSLY by designating a designated master controller
Specifications
Flow Rate: Up to 3434GPH
Power Consumption: 20 Watts
Aquarium Size Range: 50-200 Gallons
Complete Replacement Dry Side Assembly for the Vortech MP40QD Water Pump. Allows for a partial upgrade your existing pump to the new QD version.The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Tunze Stream 6105 Replacement Motor Block - 6105.100
Overview
Refresh your Turbelle® Stream 6105 with this factory motor block. The sealed electronic drive renews power, restores variable flow control, and eliminates vibration, returning your pump to factory-silent operation.
Features
Original micro-processor controlled motor for precise speed modulation
Pre-installed stainless shaft, ceramic bushings, and silicone O-ring
Plug-and-play two-pin connector fits existing 6105 cables
Encapsulated electronics for complete saltwater corrosion protection
Silicone vibration grommets reduce noise transfer to glass
Specifications
Compatible pump: Turbelle Stream 6105
Flow capability after swap: 3000–12000 L/h
Operating voltage: 12–24 V DC via existing driver
Cable length: 3 m to driver
Housing size: 91 × 70 × 77 mm
What's Included
Motor Block 6105.100 with rotor assembly
Hygger Piezoelectric Ceramic Air Pump - Black
Overview
Unlike traditional air pumps, the Hygger mini air pump for aquariums is driven by a thin piezoelectric ceramic plate and has no motor or other mechanical equipment.
It is very quiet and fit for fish tanks or fish bowls placed in bedrooms, living rooms, and offices.
It only uses 1.5-watt power consumption and has an air flow rate of 420 ml/min
Specifications
Model Number: HG811-Black
Dimensions: 2.4" x 2.4" x 0.8"H Power Consumption: 1.5 Watts
Max Air Flow Rate: 420ml/min
Noise Level: Less than 35db
Air Pressure: 12KPa
Airstone, silicone tubing and suction cup included.
Note: Air Pump is not submersible - Keep in safe dry place!
The Reef Octopus VarioS Circulation Pump features a detachable controller with mount, high quality ceramic shaft with propeller bearing to reduce wear and tear and the latest variable speed flow technology for refined control, enhanced performance, energy-efficiency and safer operations. Unlike the vast majority of circulation pumps which uses alternating current (AC), the VarioS pump boasts several key advantages over traditional AC pumps like greater energy efficiency and safer low voltage operation and produce less heat per volume of flow.Now the aquarist can have full control of the water flow through their sump, reactors, filters or closed loop systems!!!In addition to allowing the pump to run at 5 different speeds, which is pretty normal for a DC pump, the new VarioS Controller takes the pump to a new level featuring: A float switch connection, which allows you to connect a float switch (included in the box) to the controller. This is an added security feature that allows you to shut off your water pump when your sump water has reached a high or low level. In all, you don't need another module or controller to add a float switch to your system. Two different pause/feed modes that will shut off the pump for either 15 or 60 minute intervals. These come handy when you are feeding the tank or conducting regular maintenance such as a water change. And the best feature of the VarioS controller is... a 0-10v input which will allow a 3rd party controller such as Neptune System's APEX or Reef Angel to take over the pump and tell it what to do. In this mode, the new VarioS controller becomes an interface between the system controller and the pump allowing you to create intricate programs using your system controller native language. This is unprecedented controllability on a skimmer or water pump. In essence, you can use your system controller as your DC pump controller! The VarioS pump has a true slow start-up where the pump slowly ramps up from zero RPM to the full pre-set speed over a period of approximately 10 seconds.The pump and controller are connected via a waterproof 3-conductor union. The detachable controller will allow for a simple waterproof union. The volute can rotate to change the pump's output orientation in 90 degree intervals, meaning users can output water vertically (up or down) as well as horizontally.VarioS 2 Water Pump Specs Output Thread Size: 1in slip PVC Inlet Union Size: 1in slip PVC Outlet Barb Size: 1/2-3/4in Stepped Dimensions: 3.75in(W) x 5.7in(L) x 5.5in(H) Voltage: DC 24V Power Consumption: 40 watts at max power Max Flow: 1050gph* Max Head Height: 14.7ft* *results will vary depending on aquarium setupWhat's included in the box VarioS pump Controller Float switch Power supply Output and input union for plumbing direct PVC Versatile stepped barb output fitting for flex tubing Protective intake screen.
Replacement exhaust hose and clamps for all Hiblow Air Pump models.These are the models that fit on the outside of the air pump.Manufacturer Part Number: PAJH0LP
Replacement Impeller for Mag Drive 1800 Water Pump.Note: These are the version "B" impellers, and are meant for the newer style of Mag Drive Water Pumps. Prior to ordering, ensure your impeller length. Model "A" length is 4.625" (including bushing), while the "B" version is 5.125" including the bushing.
Prevents fish, invertebrates, and debris from entering your overflow and/or pump. Low profile makes this strainer very unobtrusive and suitable for virtually any display aquarium. Slip fitting makes installation a snap.
AI Nero 7 Powerhead
Nero 7 Water Pump
Overview
The ideal submersible pump for larger aquariums! The Nero 7 punches well above its class delivering true 4000 gallons per hour (gph) of flow. That's the kind of flow that keeps your tank clean and your coral healthy.
Features
Aim True - With a large range of movement (15 degrees) in all directions, you can direct the flow where your tank needs it most.
Simple Built-in Control - The Nero 7 Submersible Pump includes Bluetooth control standard. Use the myAI app on any iOS or Android device to easily set up or program one or multiple Nero 7 pumps. Don't have a smartphoneThe Nero 7 includes an integrated controller for simple speed adjustments.
myAI Dashboard - Each tank has a dashboard with easy-to-access quick keys for changing between Schedule/Manual modes, Feed Mode and All On/Off functions.
myAI Schedule Mode - Our intuitive schedule mode is so easy to program you'll have plenty of time for more important tasks, like enjoying your corals.
Multiple Pumps - Control and monitor multiple Nero 7 pumps with ease. You can even sync settings from other pumps.
Easy Scheduling - Set your pump schedules with an intuitive drag-and-drop interface.
3 Pump Modes
Constant Speed - A constant stream of flow at the intensity of your choosing.
Pulse - Consisting of uniform high and low levels.
Random - Simulates a high-energy reef environment.
Fish Guard - The Nero 7 includes a fish guard to protect any curious or slow-swimming fish from the pump propeller.
Specifications
Dimensions (wetside): 2.42"W × 3.38"H
Maximum Flow Rate: 4000GPH
Power Consumption: Up to 40 Watts
Maximum Glass Thickness: 0.79" (20mm)
What's in Box Nero 7?
AI Nero 7 Pump with Integrated Driver
Mounting Magnets
Fish Guard
Power adapter with universal plug adapter set
Quick start guide
Mounting hardware
The Reef Octopus VarioS Circulation Pump features a detachable controller with mount, high quality ceramic shaft with propeller bearing to reduce wear and tear and the latest variable speed flow technology for refined control, enhanced performance, energy-efficiency and safer operations. Unlike the vast majority of circulation pumps which uses alternating current (AC), the VarioS pump boasts several key advantages over traditional AC pumps like greater energy efficiency and safer low voltage operation and produce less heat per volume of flow.Now the aquarist can have full control of the water flow through their sump, reactors, filters or closed loop systems!!!In addition to allowing the pump to run at 5 different speeds, which is pretty normal for a DC pump, the new VarioS Controller takes the pump to a new level featuring: A float switch connection, which allows you to connect a float switch (included in the box) to the controller. This is an added security feature that allows you to shut off your water pump when your sump water has reached a high or low level. In all, you don't need another module or controller to add a float switch to your system. Two different pause/feed modes that will shut off the pump for either 15 or 60 minute intervals. These come handy when you are feeding the tank or conducting regular maintenance such as a water change. And the best feature of the VarioS controller is... a 0-10v input which will allow a 3rd party controller such as Neptune System's APEX or Reef Angel to take over the pump and tell it what to do. In this mode, the new VarioS controller becomes an interface between the system controller and the pump allowing you to create intricate programs using your system controller native language. This is unprecedented controllability on a skimmer or water pump. In essence, you can use your system controller as your DC pump controller! The VarioS pump has a true slow start-up where the pump slowly ramps up from zero RPM to the full pre-set speed over a period of approximately 10 seconds.The pump and controller are connected via a waterproof 3-conductor union. The detachable controller will allow for a simple waterproof union. The volute can rotate to change the pump's output orientation in 90 degree intervals, meaning users can output water vertically (up or down) as well as horizontally.VarioS 2 Water Pump Specs Output Thread Size: 1in slip PVC Inlet Union Size: 1in slip PVC Outlet Barb Size: 1/2-3/4in Stepped Dimensions: 3.75in(W) x 5.7in(L) x 5.5in(H) Voltage: DC 36V Power Consumption: 98 watts at max power Max Flow: 2700gph* Max Head Height: 18ft* *results will vary depending on aquarium setupWhat's included in the box VarioS pump Controller Float switch Power supply Output and input union for plumbing direct PVC Versatile stepped barb output fitting for flex tubing Protective intake screen.
Complete Wet Side Assembly for the EcoTech Vortech MP60 Water Pump.Manufacturer Part Number: MP339The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Tunze Nanostream 6055 Replacement Impeller - 6055.700
Overview
The 6055.700 rotor set renews flow and quietness in your Nanostream 6055 or 6095. Precision-balanced blades and a polished ceramic shaft restore factory performance and eliminate rattle.\
Features
Factory-balanced propeller for smooth operation
Polished ceramic shaft and bushings reduce wear
Includes thrust washer and O-ring
Drop-in replacement—no tools required
Specifications
Rotor diameter: 35 mm
Material: POM plastic, ceramic shaft
What's Included
Rotor/impeller assembly 6055.700
Replacement Impeller for Mag Drive 950 Water Pump.Note: These are the version "B" impellers, and are meant for the newer style of Mag Drive Water Pumps. Prior to ordering, ensure your impeller length. Model "A" length is 4.625" (including bushing), while the "B" version is 5.125" including the bushing.
Tunze Turbelle Nanostream Pump Hub Edition - 6095
Overview
The Turbelle® Nanostream® 6095 Hub Edition brings cloud-connected control to wide-flow nano circulation. With Turbelle Controller 7020.500 and TUNZE® HUB you can program waves, Flow and Fish-Care modes. Engineered for aquariums from 100–1000 L (25–265 US gal) it delivers 2000–9500 L/h with only 5–21 W consumption, backed by TUNZE® reliability.
Features
Electronic control via Turbelle Controller 7020.500 & TUNZE® HUB
Fish-Care, blocking & run-dry protection modes
3D-adjustable wide-jet flow deflector
Silence Magnet Holder for glass up to 15 mm
Abrasion-resistant German-made cable
Specifications
Tank size: 100–1000 L (25–265 US gal)
Flow rate: 2000–9500 L/h (550–2500 US gal/h)
Energy consumption: 5–21 W
Power supply: 100–240 V / 50–60 Hz
Cable length: 3 m
Dimensions: Ø 70 mm; output Ø 50/10 mm
What's Included
Nanostream Pump 6095 Hub Edition
Turbelle Controller 7020.500
Power supply unit
Silence Magnet Holder & flow deflector
Aqueon Stand Pipe Accessory Kit
Overview
Overflow Accessory Kit specifically designed for the All-Glass Megaflow and Corner Overflows. This unit will work with most overflows 18" and taller with a hole designed for a 1" bulkhead.
Features include adjustable drainpipe and air intake elbow to help reduce overflow noise and a dual nozzle made out of modular piping for your 3/4" return line.
What's Included
Adjustable Drain pipe
Modular Piping Dual Nozzle
3/4" Return pipe
3/4" Elbow
1" Bulkhead
3/4" Universal Bulkhead
3/4" Bulkhead
Air Intake Elbow
90 degree Elbow (attaches to Air Intake)
Drain Pipe Base (to slide into 1" Slip Bulkhead)
Strainer
Bulkhead Wrench
Use 1 Kit per overflow. In order to use return pipe feature, your overflow must have a hole drilled to accommodate a 3/4" bulkhead.
Vivid Creative FLEX Series RFG - 1 Inch
Overview
The Flex Series RFG is manufactured with TPU, a firm rubber-like material, the RFG Flex Series will introduce a new level of durability, functionality and reliability to the Random Flow Generator Nozzle Line up.
Features
Creates a random flow pattern with no moving parts - Unique Patented Internal Design Same trusted design as the original Random Flow Generator Nozzle
Wide compatibility Works with 1in Loc-Line modular hose and most other modular hoses of similar size
Extremely Durable and Flexible Material Manufactured with a reef-safe TPU (Thermoplastic Polyurethane)
Patent pending design
Flexibility, Durability and Construction RFG Flex
The 5 internal fins form a set of spiraling channels. As the water flows through the nozzle, the channels draw the stream of water in one direction or the other. The small amount of interference at the base of the Eductor causes the stream to randomly change direction as it exits the nozzle. Made with a strong, extremely durable and flexible material, the RFG Flex Series won't crack,it can't break and has superior durability. It's also extremely easy to clean, since most algae and bio films simply slide right off with minimal effort.
Specifications
Includes 1 x Flex-Series 1in Random Flow Generator Nozzle2 x Multidapter Fittings: MD2530LL100 & MD3035LL100
Suggested Minimum Flow: 320 - 400 GPH
Suggested Optial Flow: 720 - 1000 GPH
Dimensions: 2" x 4" x 6"
One Flex RFG per package
Sicce Syncra SDC 7.0 WiFi Controllable Water Pump
Overview
Sicce celebrates the success of the Syncra line with the new Syncra Smart DC Pumps to complete our existing range for an unmatched combination built on the features customers love about the Syncra line.
is Better! Smarter!
The new generation of Smart Syncra DC pumps are equipped with integrated intelligence systems to meet the needs of advanced recirculating applications. With programming freedom, controllability is finally coupled with power, energy efficiency, in-line or submersible use, and low heat in addition to smart technology that only Syncra can offer for a wide range of uses. The pumps are managed by an easy to use practical interface. Sicce reconfirms its leadership in the recirculating and skimmer pump markets.
Features
Simplicity - Easy to use and clean; Sicce rotor technology offers lower maintenance, with easy rotor access when needed.
Versatility - Run internal or external; 190 degree turning pre-chamber allows for horizontal or vertical positioning.
Quiet Operation - Polished, ceramic shaft and bearings with unmatched precision.
Cooler Running - Proprietary hydraulic design, higher quality materials, and a forced internal recirculation provide less heat transfer
FeaturesExcellent energy efficiency with a near perfect power factor pays for the pump in savings! New rubber feet are custom designed bumpers to protect from vibration on all sides of the pump, not just the bottom. Automatic power-off switch protects pump if it runs dry. Half the size and power consumption of the Syncra line. 3-year or 5-year extended warranty with online registration and purchase from an authorized dealer.Specifications
Voltage: 24 Volts
Min/Max Power Consumption: 20-65 Watts
Flow Rate: 800 - 1900 gph
Head Pressure (Min/Max): 6.5' - 16.5'
Inlet/Outlet Size: 1"/1"
For more information, see the links tab.
Hygger Double Aquarium Powerhead - 2 x 1050 GPH
Overview
The Hygger double-head wave maker for aquariums has all the double effects, it can make waves longer and more powerful.
The horizontal wide-angle surface is wider, and the water wave can reach the surrounding area in a wide range.
The maker can be widely used for 40 - 240 gallons of fish tanks.
Features
Enhanced Stability - The circulation pump features a combination of suction cups and a large magnet base, ensuring a secure and stable attachment to the fish tank wall. This design minimizes movement and enhances overall stability.
Water Circulation & Dissolved Oxygen - When installed at the top of the tank, the pump generates noticeable water ripples, which significantly increase dissolved oxygen levels. This enhanced circulation helps balance water temperature more quickly, especially in larger tanks with heaters. Additionally, it promotes a steady water flow, forming a water cycle that contributes to stable water quality.
BenefitsPositioning the pump in the middle of the tank helps disperse bubbles from the air stone, improving water clarity. The current created encourages fish to swim against the flow, promoting exercise and a stronger appetite. A stronger water flow can also contribute to better overall fish health.
Assisting in Fish Feeding - Placing the pump at the bottom of the tank helps move filter material and assist in clearing away fish feces and food. The circulating water flow generated by the pump aids in directing waste and food particles, ensuring a cleaner environment. The pump's OFF function allows you to pause operation without disrupting fish feeding.
Specifications
Power Consumption: 5 Watts (110/120v 60Hz)
Flow Rate: 2 x 1050 GPH (2 x 4000 LPH) Recommended Aquarium Size: 40 - 110 Gallons
Maximum Glass Thickness: 0.47" (12mm)
Hygger Adjustable Flow Air Pump - 10 Watt
Overview
The Hygger 046 aquarium AC air pumps provide powerful, reliable airflow to keep high oxygen levels for aquariums and promote health. It is available in two sizes to handle the aeration for aquarium from 5 to 600 gallons aquariums, hydroponic set-ups, as well as ponds.
Features
Application - As a vital aerator, the Hygger adjustable flow air AC air pump can be used in deep tanks up to 6.5 feet. It withstands long-time use to promote oxygen supplement constantly, and is powerful enough to power the long decorative air stones, multiple air stones in one or more tanks, and protein skimmers for saltwater aquariums. Widely suitable for freshwater and marine aquariums.
LCD Screen Display - You can press the -/+ button to adjust the air volume to meet the various needs and press the ON/OFF button to turn the AC air pump on or off.
Double Outlet Air Pump - The air pump's double outlets fit standard 3/16" airline tubing and can be connected to air stones, sponge filters, aquarium decorations, and other related equipment. It is easy to insert multiple fish tanks or aquariums through double outlets.
Adjustable Air Flow - The aquarium bubbler comes with 2 flow control buttons and an ON/OFF button. The amount of air for dual outputs can be controlled by simply pressing the "+/-" button, you can adjust the airflow to oxygenate tanks fully.
Ultra Quiet Operation - The Hygger AC air pump uses a magnetic ceramic plate driver that operates quietly, without electromagnet interference. The suspended motor, ABS thick shell, and sealed inner baffle greatly reduce noise. At the same time, the soft rubber foot pad can effectively cushion the vibration produced by the motor, and the full copper wire motor is stable and durable. With 4 shockproof rubber feet to greatly minimize the vibration, it ensures steadier airflow and reduces noise during aeration work.
Specifications
Power Consumption: 10 Watts
Maximum Air Flow: 16L/Min
Sound Level: 35db or Less
Air Pressure: 0.03Mpa
Maximum Depth: 6.5 feet (1.8M)
Cord Length: 6 feet (1.8M)
Dimensions: 5.7 x 5.7 x 4.7" (14.5x14.5x12cm)
Tunze Stream 6105 Impeller (NEW) - 6105.701
Overview
The 6105.701 next-generation impeller upgrades any Turbelle® Stream 6105 to latest flow and noise-reduction specs. Redesigned blade geometry increases thrust by 12 % while the dampened hub cuts acoustic hum for an even quieter reef.
Features
Optimized hydrofoil blades boost flow and lower turbulence
Integrated silicone hub sleeve isolates vibration at its source
Hard-polished ceramic shaft and bushings extend service life
Color-coded rotor makes future maintenance identification easy
Backward compatible with all 6105 motor blocks
Specifications
Flow gain: +12 % vs older rotor
Operating speed: 1500–3500 rpm variable
Materials: POM blades, ceramic shaft, silicone sleeve
What's Included
Impeller/rotor assembly 6105.701
Tunze Turbelle Stream Pump - Hub Edition 6105
Overview
The Turbelle® Stream Pump 6105 Hub Edition features the new Turbelle Controller 7020.500 compatible with TUNZE® HUB for cloud-connected control. Engineered for aquariums from 200–2000 L (53–528 US gal) it delivers 3000–12 000 L/h at only 3–11 W achieving over 1000 L/h per watt. Its patented Magnetic-Bearing drive runs whisper-quietly and the Fish-Care function protects livestock during feedings.
Features
Electronic control via Turbelle Controller 7020.500 & TUNZE® HUB
Fish-Care mode for gentle circulation during feeding
Silence Magnet Holder for glass up to 15 mm
Includes second propeller housing for directional flow adjustment
Abrasion-resistant German-made cable for durability
Specifications
Tank size: 200–2000 L (53–528 US gal)
Flow rate: 3000–12 000 L/h (793–3170 US gal/h)
Energy consumption: 3–11 W @ 12 V
Power supply: 100–240 V / 50–60 Hz
Cable length: 5 m to controller
Dimensions: Ø 90 mm; output Ø 63/75 mm
What's Included
Stream Pump 6105 Hub Edition
Turbelle Controller 7020.500
Power supply unit
Second propeller housing
Silence Magnet Holder
