With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 500 GPHFlow Rate at 4' Head: 310 GPHFlow Rate at 6' Head: 190 GPHFlowchart for the Danner Mag-Drive 500 Supreme Water Pump
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 1/2"Output: 1/2"Flow Rate at 0' Head: 700 GPHFlow Rate at 4' Head: 475 GPHFlow Rate at 6' Head: 400 GPHFlowchart for the Danner Mag-Drive 700 Supreme Water Pump
With only one moving part, and constructed out of non-corrosive ABS plastic, Mag Pumps are ideal for salt, or freshwater use.Fully submersible, or inline operation.A non oil filled motor make these pumps completely invertebrate & fish safe.All Mag Pumps are CuL Approved, and come with a one year warranty.Specifications:Input: 3/4"Output: 3/4"Flow Rate at 0' Head: 950 GPHFlow Rate at 4' Head: 800 GPHFlow Rate at 6' Head: 760 GPHFlowchart for the Danner Mag-Drive 950 Supreme Water Pump
Double Thread Bulkheads accept threaded fittings on the tank side (water side) and on the outside. The threads on the exterior of the bulkhead are only for the bulkhead nut itself.Our 1" Bulkheads require a 1-3/4" hole.
Double Thread Bulkheads accept threaded fittings on the tank side (water side) and on the outside. The threads on the exterior of the bulkhead are only for the bulkhead nut itself.Our 1/2" Bulkheads require a 1-1/4" hole.
Double Thread Bulkheads accept threaded fittings on the tank side (water side) and on the outside. The threads on the exterior of the bulkhead are only for the bulkhead nut itself.Our 3/4" Bulkheads require a 1-1/2" hole.
Ecotech EcoSmart Mobius RF Module
Ecotech Replacement RF Module
Overview
Wireless module to upgrade your older EcoTech VorTech and Vectra pumps or G3 and G4 radions to the current Mobius system.
Will also upgrade wired pump (MP10QD) to have wireless capabilities at the same time.
Ecotech Marine VorTech MP10wQD Water Pump
Overview
The VorTech MP10wQD delivers broad reef-safe flow with no cords in the tank thanks to EcoTech’s patented magnetically coupled wet side and external dry side. The QuietDrive controller cuts motor noise dramatically while boosting efficiency and output and the pump is Mobius Ready for direct Bluetooth control of advanced modes like Reef Crest Lagoon Gyre Short Pulse Tidal Swell and Nutrient Transport. Wireless “w” models can multi-pump sync anti-sync or coordinate for true tank-wide water movement and are compatible with the EcoTech Battery Backup for power-outage protection.
Features
Mobius Ready app control with schedules profiles and fine speed control
Wide gentle flow pattern eliminates hot spots and supports natural gyres
Wireless multi-pump communication on “w” models for sync anti-sync and coordinated modes
QuietDrive technology for up to ~90% lower motor noise versus earlier drivers with improved efficiency
No electrical components in the water no added heat clean in-tank aesthetic
Battery Backup compatible for hours of emergency flow during outages
Specifications
Max flow: 2,500 gph (9,500 lph)
Power consumption: 8–19 W
Recommended tank range: 2.5–50+ gal (9.5–190 L)
Max glass thickness: 0.375" (9.5 mm)
Control: QuietDrive driver Mobius app Bluetooth wireless “w” RF for multi-pump control
UPC/EAN: 653341197221
Compatibility & Upgrade Paths
Pairs with additional VorTech pumps for gyre patterns and crossflow
Works with EcoTech Battery Backup accessory for emergency operation
Optional Apex control via Neptune MXM module for unified lighting and pump control
Maintenance & Consumables
Periodic wet-side cleaning restores peak output; inspect bearings and shaft
Foam guard available to protect delicate livestock and reduce debris intake
Keep dry side dust-free and ensure spacer selection matches glass thickness
Electrical Heat Noise
External motor keeps heat out of the water column
QuietDrive reduces audible motor noise in typical installs
Use a GFCI outlet and drip loops on all aquarium equipment
Warranty & Support
Backed by EcoTech Marine with downloadable quick start guides full manuals and responsive support. Firmware updates delivered via Mobius.
Shipping & Handling Notes
Strong magnet assembly; keep packaged until install and avoid contact with sensitive electronics and metal surfaces. Verify glass thickness and select the correct spacer before mounting.
Directions
Verify your glass thickness and fit the correct spacer then place the wet side underwater to purge air
Align wet and dry sides through the glass and fine-tune position to eliminate vibration
Power the QuietDrive driver pair to the Mobius app and choose an operating mode; set schedules and maximum speed
For multi-pump setups use wireless sync anti-sync or coordinated modes and test Feed and Night modes
What’s included
VorTech MP10 Mobius Ready QuietDrive pump (wet side and dry side)
QuietDrive driver/controller with mount
Spacer and mounting hardware kit
Foam guard
Power supply
Ecotech Marine VorTech MP40wQD Water Pump
Overview
The MP40wQD is the benchmark high-performance powerhead for medium to large reef tanks combining huge broad flow with a clean cord-free display. QuietDrive delivers whisper operation and excellent efficiency while Mobius app control unlocks granular schedules and classic VorTech modes including Reef Crest Lagoon Gyre Short Pulse Tidal Swell and Nutrient Transport. Wireless “w” capability lets up to eight pumps communicate for synchronized anti-synchronized or coordinated programs and the system is Battery Backup compatible to safeguard livestock during outages.
Features
Mobius Ready Bluetooth control with advanced mode scheduling and profiles
Broad tank-wide flow pattern supports SPS-dominant and mixed reefs without hot spots
Wireless multi-pump communication for complex gyres and tidal cycles
QuietDrive technology reduces motor noise significantly and improves efficiency
No wires in the water no risk of stray voltage and no heat added to the tank
EcoTech Battery Backup compatible for emergency run-time
Specifications
Max flow: 5,000 gph (19,000 lph)
Power consumption: 9–37 W
Recommended tank range: 50–500+ gal (190–1,800 L)
Max glass thickness: 0.75" (19 mm)
Control: QuietDrive driver Mobius app Bluetooth wireless “w” RF for multi-pump control
UPC/EAN: 653341197023
Compatibility & Upgrade Paths
Combine with additional VorTechs for opposing gyres and crossflow
Compatible with EcoTech Battery Backup for outage resilience
Optional Apex integration via Neptune MXM to manage lights and pumps in one interface
Maintenance & Consumables
Routine wet-side cleaning keeps output at spec; inspect bearings shaft and prop
Replace foam guard as needed; consider add-on guards for anemone safety
Confirm spacer selection and re-check alignment after any maintenance
Electrical Heat Noise
External motor minimizes heat transfer to water
QuietDrive controller yields notably quiet operation
Use a GFCI outlet and maintain drip loops on all cords
Warranty & Support
Supported by EcoTech Marine with online manuals quick starts and firmware updates via Mobius.
Shipping & Handling Notes
Powerful magnets inside; keep boxed away from credit cards and electronics. Verify glass thickness before install and use the correct spacer.
Directions
Fit the proper spacer for your glass then submerge the wet side to purge air and align through the glass
Power on the driver pair with Mobius and select an operating mode set maximum speed and schedules
For multi-pump reefs configure sync anti-sync or coordinated programs and test Feed and Night modes
Place the outlet path to avoid sand storms while ensuring strong cross-tank movement
What’s included
VorTech MP40 Mobius Ready QuietDrive pump (wet side and dry side)
QuietDrive driver/controller with mount
Spacer and mounting hardware kit
Foam guard
Power supply
Ecotech Marine VorTech MP60wQD Water Pump
Overview
The MP60wQD is EcoTech’s flagship high-flow solution for large and extra-large aquariums delivering massive broad movement without intrusive in-tank hardware. The external dry side eliminates cords and heat in the display while QuietDrive keeps operation civilized. Mobius app control unlocks advanced programming and wireless “w” capability coordinates up to eight pumps. Pair with EcoTech’s Battery Backup for vital circulation during power interruptions and use multiple MP60s to create stable gyres across long spans and deep displays.
Features
Huge broad flow for SPS-dominant and high-bioload systems up to 1,000+ gallons
Mobius Ready Bluetooth control with classic VorTech modes and custom schedules
Wireless multi-pump sync anti-sync and coordinated programs for tank-wide patterns
QuietDrive efficiency and noise reduction with zero electrical parts in the water
Handles thick glass with robust magnetic coupling and spacer system
Battery Backup compatible for extended emergency run-time
Specifications
Max flow: 9,000 gph (34,000 lph)
Power consumption: 10–60 W
Recommended tank range: 120–1,000+ gal (450–3,800 L)
Glass thickness range: 0.375–1.00" (9.5–26 mm)
Control: QuietDrive driver Mobius app Bluetooth wireless “w” RF for multi-pump control
UPC/EAN: 653341197429
Compatibility & Upgrade Paths
Ideal in pairs or quads for long tanks peninsulas and deep displays
Integrates with EcoTech Battery Backup accessory
Optional Apex control via Neptune MXM module for unified ecosystem management
Maintenance & Consumables
Clean wet side regularly to maintain output; inspect shaft bushings and prop blades
Use included foam guard or third-party guards if keeping anemones or small fish
Confirm spacer selection for your glass thickness and re-check alignment after service
Electrical Heat Noise
External motor keeps heat out of the system
QuietDrive design for low audible footprint in living spaces
Always employ GFCI protection and drip loops
Warranty & Support
Covered by EcoTech Marine warranty with online manuals quick starts and firmware updates via Mobius app.
Shipping & Handling Notes
High-strength magnet assembly; handle with care and keep away from electronics. Verify glass thickness prior to install and use the proper spacer.
Directions
Select the correct spacer for your glass then submerge the wet side purge air and align with the dry side
Power the driver pair to Mobius and choose your operating mode and schedule; set maximum speed conservatively and ramp up
For multi-pump systems configure sync anti-sync or coordinated programs and confirm stable gyre formation without sandstorms
Test Feed and Night modes and enable Battery Backup if installed
What’s included
VorTech MP60 Mobius Ready QuietDrive pump (wet side and dry side)
QuietDrive driver/controller with mount
Spacer and mounting hardware kit
Foam guard
Power supply
Ecotech Vectra Battery Backup Booster
Overview
The Ecotech Vectra Battery Backup Booster unit boosts the 12v output to 36v to run Vectra water pumps using the Battery Backup.
The same booster will be required for the QDMP40 water pumps also as they run on 36v also
Ecotech Vectra L2 Water Pump
Overview
EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile Device
All Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery Backup
Blizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible Installation
Included with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup.
Vectra L2 Return Pump Modes
Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial.
Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.
Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed.
Closed Loop Modes Pump
Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours.Vectra L2 is Mobius Compatible
Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and Radion LED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger. Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expectOur award winning customer service staff can log into your account and suggest changes for you.
is Battery Backup Compatible
In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing. By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. *Hours are estimated and will vary depending on battery life, pump mode, and other factors.*For best performance when in return pump configuration, a Vectra Battery Backup Booster is required.
Check out Vectra Pump Advantage
Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons: 1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate. When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
SpecificationsFlow Rate: 3100 GPH (12400 LPH) Wireless: IncludedMax Head Pressure: 21.5 feet (6.5 meters) Footprint: 5" x 8.5" (113.5mm x 192.6mm) Fittings: Input: 1.5" (38mm) / Output: 1.25" (31.75mm) Max 150W Power SupplyWhat's Included
1x Vectra L2 Mobius Ready DC Pump
1x Vectra QuietDrive Driver
1x Driver Mounting Bracket
1x Power Supply
1x Input Quick Coupler
1x Output Quick Coupler
1x Driver Mounting Bracket
1x Instructional Manual
Ecotech Vectra M2 Barb and Screen Kit
Overview
The specialized screen included in this kit will prevent livestock or any objects from entering the intake of your pump and causing blockage or failure. The barbed fittings allow for fast and easy plumbing with soft tubing without the need for additional fittings or adapters.
Intake Size: 1.25"
Output Size: 1"
Ecotech Vectra M2 Water Pump
Overview
EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile Device
All Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery Backup
Blizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible Installation
Included with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup.
Vectra M2 Return Pump Modes
Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial.
Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.
Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed.
Closed Loop Modes Pump
Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours.Vectra M2 is Mobius Compatible
Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and Radion LED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger. Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expectOur award winning customer service staff can log into your account and suggest changes for you.
is Battery Backup Compatible
In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing. By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. *Hours are estimated and will vary depending on battery life, pump mode, and other factors.*For best performance when in return pump configuration, a Vectra Battery Backup Booster is required.
Check out Vectra Pump Advantage
Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons: 1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate. When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
SpecificationsFlow Rate: 2000 GPH (7500 LPH) Wireless: IncludedMax Head Pressure: 21.5 feet (6.5 meters) Footprint: 4.5" x 7.5" (113.5mm x 192.6mm) Fittings: Input: 1.25" (31.75mm) / Output: 1" (25mm) Max 96W Power SupplyWhat's Included
1x Vectra M2 Mobius Ready DC Pump
1x Vectra QuietDrive Driver
1x Driver Mounting Bracket
1x Power Supply
1x Input Quick Coupler
1x Output Quick Coupler
1x Driver Mounting Bracket
1x Instructional Manual
Ecotech Vectra S2 Barb and Screen Kit
Overview
The specialized screen included in this kit will prevent livestock or any objects from entering the intake of your pump and causing blockage or failure. The barbed fittings allow for fast and easy plumbing with soft tubing without the need for additional fittings or adapters.
Intake Size: 1"
Output Size: 3/4"
Ecotech Vectra S2 Water Pump
Overview
EcoTech Marine has set new standards for equipment in saltwater aquariums. The Vectra is no exception. The world's smartest return pump can be run on a schedule, wirelessly give you updates on the operation and be automatically configured to work with your specific aquarium setup.CalibrationThe Vectra can be set to auto calibrate to your tank. As a return pump, this smart feature prevents back siphoning if the pump is turned down and also provides a neutral flow condition in feed mode. ESL via Mobile Device
All Vectra pumps are compatible with the Mobius App. Mobius provides completely wireless access to the world of EcoSmart Live, the web-based aquarium command center from EcoTech Marine.Battery Backup
Blizzard. Hurricane. A motorist hits a utility pole. Stuff happens. The power goes out - Vectra pumps are compatible with the EcoTech Battery Backup accessory.Flexible Installation
Included with the Vectra Pump are QuickCouple components, these fitted couplers provide the flexibility to make installation, cleaning and adjustments a breeze. The Vectra also boasts the ability to rotate the volute of the pump to adapt to the needs of your plumbing setup.
Vectra S2 Return Pump Modes
Constant Speed - Constant Speed mode is the default mode of the Vectra, this makes the pump produce flow at a constant speed that is determined by the position of the dial.
Feed Mode - At the touch of a button the Vectra pump will temporarily pause the current mode and idle allowing food to be added to the tank without being cycled into the overflow and filtration.
Speed Lock - Speed Lock gives you the ability to lock in a desired speed on the pump by disabling the control dial protecting you from accidental and not so accidental unwanted changes in speed.
Closed Loop Modes Pump
Lagoonal Random - Lagoonal Random mode simulates a low-energy lagoon environment. The speed of the pump is changed slowly to recreate the gentle currents of a lagoon. Reef Crest Random - Reef Crest Random mode simulates a high-energy reef environment. The pump will change speed frequently and drastically to simulate crashing waves and surging tide. This is a favorite of SPS coral. Gyre Mode - Gyre mode creates a flow pattern consisting of uniform clockwise and counter clockwise flow levels pulsing at a selected interval between two seconds and two hours.Vectra S2 is Mobius Compatible
Mobius is EcoTech Marine's web-based aquarium command center. It allows you to control your Vectra pumps, VorTech pumps and Radion LED lighting from anywhere in the world through a computer or mobile device (iOS and Android supported). EcoSmart Live is loaded with features such as setup guides, flow and lighting wizards, specialty modes, and the ability to create new modes with just the click of a mouse or tap of a finger. Get real time information about your lighting and pumps or wirelessly update your product's firmware. Having issues getting the coral growth that you expectOur award winning customer service staff can log into your account and suggest changes for you.
is Battery Backup Compatible
In an aquarium with no flow, fish and corals can begin to die in as little as 4 to 10 hours. The Battery Backup is reef tank insurance in an aluminum housing. By adding the Battery Backup**, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. *Hours are estimated and will vary depending on battery life, pump mode, and other factors.*For best performance when in return pump configuration, a Vectra Battery Backup Booster is required.
Check out Vectra Pump Advantage
Traditional AC pumps, when used as a return pump for your sump, are flow controlled through the use of a choke valve. This method of control is inherently inefficient for two reasons: 1) The AC pump purchased must often be overpowered for your given setup to allow for flexibility. 2) By adding artificial impedance to your flow, electricity is wasted. The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate. When used with the Mobius App, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
SpecificationsFlow Rate: 1400 GPH (5300 LPH) Wireless: IncludedMax Head Pressure: 11.5 feet (3.5 meters) Footprint: 3.8" x 6.5" (98.4mm x 165.4mm) Fittings: Input: 1" (25mm) / Output: .75" (19mm) Max 72W Power SupplyWhat's Included
1x Vectra S2 Mobius Ready DC Pump
1x Vectra QuietDrive Driver
1x Driver Mounting Bracket
1x Power Supply
1x Input Quick Coupler
1x Output Quick Coupler
1x Driver Mounting Bracket
1x Instructional Manual
Replacement Mobius Capable Driver for the MP10 Vortech Water Pump.Use to replace your old MP10WES Driver with the Mobius version.Please note, if you wish to upgrade your old WES/Reeflink system to the new Mobius version, you will also need to replace the old RF module with the new Mobius capable RF Module (sold separately).The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.Cover is NOT included with these drivers. It is just the system board as shown in the images.
Replacement Dry Side Assembly for the Ecotech MP10QD Vortech Water Pump.Manufacturer Part Number: MP201The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Complete Replacement Dry Side Assembly for the Vortech MP40QD Water Pump. Allows for a partial upgrade your existing pump to the new QD version.The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Complete Wet Side Replacement for the Vortech MP40QD Water Pump. Allows for a partial upgrade your existing pump to the new QD version.The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Replacement Power Supply for the EcoTech Vortech MP60 Water Pump.Manufacturer Part Number: MP318-USThe Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Complete Wet Side Assembly for the EcoTech Vortech MP60 Water Pump.Manufacturer Part Number: MP339The Ecotech Vortech Compatibility/Upgrade Chart will help you choose the right path to upgrade your Vortech pump to the new Quiet Drive system.
Replacement Impeller for Mag Drive 2400 Water Pump.Note: These are the version "B" impellers, and are meant for the newer style of Mag Drive Water Pumps. Prior to ordering, ensure your impeller length. Model "A" length is 4.625" (including bushing), while the "B" version is 5.125" including the bushing.
Eheim CompactON Pump 1000
Overview
EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour.
The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water.
When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps.
In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps.
With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water
Features
Compact aquarium pump for versatile use
Silent
High pump performance at low power consumption
Attached to the glass with durable suction cups
Suitable for fresh water and marine water
Specifications
Flow rate: 400-1000 LPH (106-264 GPH)
Max Head: 1.4 meters (4.59 Feet)
Power Consumption: 15 Watts
Connections: 16/19mm (5/8")
Dimensions: 47 x 79 x 73mm (1.85 x 3.11 x 2.87")
Eheim CompactON Pump 2100
Overview
EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour.
The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water.
When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps.
In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps.
With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water
Features
Compact aquarium pump for versatile use
Silent
High pump performance at low power consumption
Attached to the glass with durable suction cups
Suitable for fresh water and marine water
Specifications
Flow rate: 1400-2100 LPH (370-554 GPH)
Max Head: 2.4 meters (7.87 Feet)
Power Consumption: 38 Watts
Connections: 19/25mm (3/4-1")
Dimensions: 70 x 142 x 109mm (2.75 x 5.6 x 4.3")
Eheim CompactON Pump 300
Overview
EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour.
The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water.
When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps.
In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps.
With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water
Features
Compact aquarium pump for versatile use
Silent
High pump performance at low power consumption
Attached to the glass with durable suction cups
Suitable for fresh water and marine water
Specifications
Flow rate: 37-65 LPH (45-79 GPH)
Max Head: 0.6 meters (1.96 Feet)
Power Consumption: 7 Watts
Connections: 12/16mm (1/2")
Dimensions: 72 x 38 x 62mm (2.8 x 1.5 x 2.4")
Eheim CompactON Pump 3000
Overview
EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour.
The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water.
When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps.
In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps.
With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water
Features
Compact aquarium pump for versatile use
Silent
High pump performance at low power consumption
Attached to the glass with durable suction cups
Suitable for fresh water and marine water
Specifications
Flow rate: 1800-3000 LPH (475-792 GPH)
Max Head: 2.7 meters (8.85 Feet)
Power Consumption: 55 Watts
Connections: 19/25mm (3/4-1")
Dimensions: 70 x 142 x 109mm (2.75 x 5.6 x 4.3")
Eheim CompactON Pump 600
Overview
EHEIM compactON is the compact and yet powerful aquarium pump. Available in six sizes with flow rates from 170 to 5000 liters per hour.
The EHEIM compactON aquarium pump is characterized by its name due to it's compact design. The larger EHEIM compactON 2100, 3000 and 5000 can also be modified for use out of water using the appropriate accessories (included). The high quality of the materials used makes the pumps suitable for both fresh and marine water.
When compared with the original EHEIM compact/compact+, power consumption has been improved by up to 50% and the delivery head is powerful enough to make the pumps ideal for use in aquarium sumps.
In order to guarantee the silent operation of the pumps, various measures have been taken. As an example, with the EHEIM compactON 2100 and 3000, we decided to use a combination of a ceramic axle and a ceramic cover on the impeller. This also guarantees the long service life of the pumps.
With the EHEIM compactON, high safety standards have been adhered to, as with all EHEIM products, to ensure the safety of both the aquarium keeper and the aquarium inhabitants. The cables are manufactured with thicker insulation and, to safeguard the aquarium inhabitants, we only use materials that do not leak toxic substances into the water
Features
Compact aquarium pump for versatile use
Silent
High pump performance at low power consumption
Attached to the glass with durable suction cups
Suitable for fresh water and marine water
Specifications
Flow rate: 250-600 LPH (66-158 GPH)
Max Head: 1.0 meters (3.28 Feet)
Power Consumption: 7 Watts
Connections: 12/16mm (1/2")
Dimensions: 72 x 38 x 62mm (2.8 x 1.5 x 2.4")
Eheim Silent Air Pump 100
Overview
The EHEIM air pump has been a fantastic success story. Because with this pump we have succeeded in creating a very quietly working device. And that is exactly what a lot of fish keepers have been waiting for.
There are three models with a pump outlet from 100, 200 (2 x 100) and 400 (2 x 200) l/h, on which the smallest model has one and the two larger ones both have two individually adjustable air outlets. And they come equipped with one or two EHEIM diffusers.
The air flow can be regulated at each outlet on the pump and also on each diffuser. This allows you to set your own individual bubble effect.
Vibration dampening rubber edgings contribute to the pump's quiet operation. The air pump stays still and doesn't "wander about". You can also hang it vertically on the aquarium glass - specially for this there is a hook
Features
3 models to fit all common aquarium sizes
Very quiet operation
Long service life, best quality
Airflow adjustable at each air outlet on the device
Additional adjustment of the air flow and bubble effect using the diffuser.
Completely equipped with - Diffuser: air pump 100 = 1x; air pump 200, 400 je 2x - Airline: air pump 100 = 1 m; air pump 200, 400 je 2 m (Diffuser also available as a separate accessory)
Rubber suction pads to dampen vibration
Hook for hanging vertically
Diffuser with replaceable pad (Art. 7400030)
Specifications
Pumping Rate: 100L/Hour at 50Hz
Maximum Head Height: 2m
Aquarium Size: Up to 26 Gallons
Eheim Silent Air Pump 200
Overview
The EHEIM air pump has been a fantastic success story. Because with this pump we have succeeded in creating a very quietly working device. And that is exactly what a lot of fish keepers have been waiting for.
There are three models with a pump outlet from 100, 200 (2 x 100) and 400 (2 x 200) l/h, on which the smallest model has one and the two larger ones both have two individually adjustable air outlets. And they come equipped with one or two EHEIM diffusers.
The air flow can be regulated at each outlet on the pump and also on each diffuser. This allows you to set your own individual bubble effect.
Vibration dampening rubber edgings contribute to the pump's quiet operation. The air pump stays still and doesn't "wander about". You can also hang it vertically on the aquarium glass - specially for this there is a hook
Features
3 models to fit all common aquarium sizes
Very quiet operation
Long service life, best quality
Airflow adjustable at each air outlet on the device
Additional adjustment of the air flow and bubble effect using the diffuser.
Completely equipped with - Diffuser: air pump 100 = 1x; air pump 200, 400 je 2x - Airline: air pump 100 = 1 m; air pump 200, 400 je 2 m (Diffuser also available as a separate accessory)
Rubber suction pads to dampen vibration
Hook for hanging vertically
Diffuser with replaceable pad (Art. 7400030)
Specifications
Pumping Rate: 200L/Hour at 50Hz
Maximum Head Height: 2m
Aquarium Size: Up to 52 Gallons
Eheim Silent Air Pump 400
Overview
The EHEIM air pump has been a fantastic success story. Because with this pump we have succeeded in creating a very quietly working device. And that is exactly what a lot of fish keepers have been waiting for.
There are three models with a pump outlet from 100, 200 (2 x 100) and 400 (2 x 200) l/h, on which the smallest model has one and the two larger ones both have two individually adjustable air outlets. And they come equipped with one or two EHEIM diffusers.
The air flow can be regulated at each outlet on the pump and also on each diffuser. This allows you to set your own individual bubble effect.
Vibration dampening rubber edgings contribute to the pump's quiet operation. The air pump stays still and doesn't "wander about". You can also hang it vertically on the aquarium glass - specially for this there is a hook
Features
3 models to fit all common aquarium sizes
Very quiet operation
Long service life, best quality
Airflow adjustable at each air outlet on the device
Additional adjustment of the air flow and bubble effect using the diffuser.
Completely equipped with - Diffuser: air pump 100 = 1x; air pump 200, 400 je 2x - Airline: air pump 100 = 1 m; air pump 200, 400 je 2 m (Diffuser also available as a separate accessory)
Rubber suction pads to dampen vibration
Hook for hanging vertically
Diffuser with replaceable pad (Art. 7400030)
Specifications
Pumping Rate: 400L/Hour at 50Hz
Maximum Head Height: 2m
Aquarium Size: Up to 106 Gallons
Eheim Universal 1048 Water Pump
Overview
EHEIM universal pumps offer a large performance spectrum and a wide variety of uses. They are very reliable equipment offering exceptionally long service life. They can be used inside or out of water.
The integrated prefilter, safe hose connections, a variety of connections and fixings, but above all their absolute reliability make the EHEIM universal pumps very popular. They are frequently used in a professional environment - e.g. in breeding units and in zoos.
Note: This pump is not self priming.
Features
Large performance spectrum, developed for long service life
Usage in/under water or outside the water
Hermetically moulded motor guarantees guarantee complete safety
Integrated prefilter - protects the impeller from any drawn in particles and ensures longer service life
Inlet connectors for safe hose connection
Use of smart accessories; (e.g. InstallationsSET 2) can be attached to the outlet connector
A variety of fixing possibilities (mounting plate included)
All models with a choice of 1,7 m. or 10 m. cable
Specifications
Pump Output: 158 gph
Maximum Head: 4'11"
Power Consumption: 10 W (115V)
Input Size: 1/2"
Output Size: 1/2"
Flowchart for the Eheim Universal 1048 Water Pump
Eheim Universal 1260 Water Pump
Overview
EHEIM universal pumps offer a large performance spectrum and a wide variety of uses. They are very reliable equipment offering exceptionally long service life. They can be used inside or out of water.
The integrated prefilter, safe hose connections, a variety of connections and fixings, but above all their absolute reliability make the EHEIM universal pumps very popular. They are frequently used in a professional environment - e.g. in breeding units and in zoos.
Note: This pump is not self priming.
Features
Large performance spectrum, developed for long service life
Usage in/under water or outside the water
Hermetically moulded motor guarantees guarantee complete safety
Integrated prefilter - protects the impeller from any drawn in particles and ensures longer service life
Inlet connectors for safe hose connection
Use of smart accessories; (e.g. InstallationsSET 2) can be attached to the outlet connector
A variety of fixing possibilities (mounting plate included)
All models with a choice of 1,7 m. or 10 m. cable
Specifications
Pump Output: 635 gph
Maximum Head: 12'1"
Power Consumption: 65 W (115V)
Input Size: 1"
Output Size: 3/4"
Flowchart for the Eheim Universal 1260 Water Pump
Eheim Universal 1262 Water Pump
Overview
EHEIM universal pumps offer a large performance spectrum and a wide variety of uses. They are very reliable equipment offering exceptionally long service life. They can be used inside or out of water.
The integrated prefilter, safe hose connections, a variety of connections and fixings, but above all their absolute reliability make the EHEIM universal pumps very popular. They are frequently used in a professional environment - e.g. in breeding units and in zoos.
Note: This pump is not self priming.
Features
Large performance spectrum, developed for long service life
Usage in/under water or outside the water
Hermetically moulded motor guarantees guarantee complete safety
Integrated prefilter - protects the impeller from any drawn in particles and ensures longer service life
Inlet connectors for safe hose connection
Use of smart accessories; (e.g. InstallationsSET 2) can be attached to the outlet connector
A variety of fixing possibilities (mounting plate included)
All models with a choice of 1,7 m. or 10 m. cable
Specifications
Pump Output: 900 gph
Maximum Head: 11'6"
Power Consumption: 80 W (115V)
Input Size: 1"
Output Size: 3/4"
Flowchart for the Eheim Universal 1262 Water Pump
Hagen all plastic Airline control valve.Allows the user to adjust the amount of air flow entering the aquarium.Splits the airflow into multiple streams.Suitable for fresh or saltwater.
Fluval A101 Air Pump
Overview
A Series Air Pumps are designed to significantly improve water circulation and essential oxygen levels for fish, plants, corals, and beneficial bacteria.
Hobbyists will appreciate a powerful air delivery that is designed with ultra-quiet operation and energy efficiency in mind, in addition to adjustable flow control dials that allow each outlet to be independently controlled.
Features
Powerful air delivery - provides excellent output flow-to-pressure ratio
Engineered noise dampening baffle chamber deliver an ultra-quiet operation
Over-sized rubber feet stabilizers reduce vibration
Adjustable flow control dials allow each outlet to be independently controlled Energy-efficient - draws as little energy as 2W (Small model)
Space saving rubber hang tag easily mounts to side of aquarium stand for less clutter
For use with 1 or several air stones
For aquariums up to 190 L (50 US gal)
Fluval A202 Air Pump
Overview
A Series Air Pumps are designed to significantly improve water circulation and essential oxygen levels for fish, plants, corals, and beneficial bacteria.
Hobbyists will appreciate a powerful air delivery that is designed with ultra-quiet operation and energy efficiency in mind, in addition to adjustable flow control dials that allow each outlet to be independently controlled.
Features
Powerful air delivery - provides excellent output flow-to-pressure ratio
Engineered noise dampening baffle chamber deliver an ultra-quiet operation
Over-sized rubber feet stabilizers reduce vibration
Adjustable flow control dials allow each outlet to be independently controlled Energy-efficient - draws as little energy as 2W (Small model)
Space saving rubber hang tag easily mounts to side of aquarium stand for less clutter
For use with 1 or several air stones
For aquariums up to 300 L (80 US gal)
Fluval A402 Air Pump
Overview
A Series Air Pumps are designed to significantly improve water circulation and essential oxygen levels for fish, plants, corals, and beneficial bacteria.
Hobbyists will appreciate a powerful air delivery that is designed with ultra-quiet operation and energy efficiency in mind, in addition to adjustable flow control dials that allow each outlet to be independently controlled.
Features
Powerful air delivery - provides excellent output flow-to-pressure ratio
Engineered noise dampening baffle chamber deliver an ultra-quiet operation
Over-sized rubber feet stabilizers reduce vibration
Adjustable flow control dials allow each outlet to be independently controlled Energy-efficient - draws as little energy as 2W (Small model)
Space saving rubber hang tag easily mounts to side of aquarium stand for less clutter
For use with 1 or several air stones
For aquariums up to 600 L (160 US gal)
🚨 CANADA POST STRIKE🚨 Due to the strike, we are UNABLE to ship Livestock and Frozen food orders by UPS Express because of the increased volume on their system. Once the strike has ended, regular service will be resumed.
