Other Protein Skimmers

Aquavitro division 250 Protein Skimmer Built for demanding reef systems up to 250 US gallons, the division 250 focuses on stable foam production, long contact time, and quiet operation in a compact footprint. An external Sicce PSK 600 needle-wheel pump maximizes reaction volume, while a dual-chamber silencer, anti-vibration hardware, and complete microbubble removal keep your sump calm and your display crystal clear. Height-based drain regulation makes tuning precise and repeatable, and the handled polycarbonate cup streamlines maintenance. Features External pump layout increases reaction volume and simplifies service Dual-chamber air silencer and anti-vibration O-rings/feet for quiet running Height-based drain regulation for stable foam level control Cylindrical reaction column for extended bubble contact time Complete microbubble removal via spillway sock and sponge Independent air/water tuning with balanced 50/50 design Performance & Sizing Average bioload: up to 1000 L / 250 US gal Maximum bioload (very heavy SPS): up to 350 L / 120 US gal Recommended sump water height: 16–25 cm (6–10 in) Specifications Height / clearance: 53 cm (20.9 in) / 55.5 cm (21.9 in) Footprint: 25.3 × 14 cm (9.9 × 5.5 in) Reaction volume: 3.9 L (1.03 US gal) Collection cup volume: 1.2 L (0.32 US gal) Pump: Sicce PSK 600 Power consumption: ~14–22 W Air flow max: ~500 L/h Water flow max: ~500 L/h Maintenance & Service Empty and rinse the cup when skimmate reaches the cup neck. Rinse the spillway sock and sponge every 1–2 weeks. Inspect and clean the PSK 600 impeller/venturi monthly; remove deposits with a mild vinegar bath as needed. Directions Place the skimmer in a sump section with 6–10 in of water. Open air and water fully and power on. Adjust the height-based drain so the foam line sits at the base of the cup neck. Allow several hours of break-in before fine tuning. What's Included division 250 skimmer body with cylindrical reaction column Polycarbonate collection cup with handle and drain Sicce PSK 600 pump with venturi Dual-chamber air silencer and tubing Height-based drain assembly with spillway, sock, and sponge Compression rings, O-rings, and fittings User manual NOTE: THIS IS A CLEARANCE ITEM AND ALL SALES FINAL

Read more less

Eshopps Skim Buddy Overview SKIM BUDDY is an auxiliary skimate container which enables aquarists that have incorporated a Protein Skimmer to remotely collect skimate to an easily accessible location while increasing there skimate storage capacity. SKIM BUDDY's innovative hang-on design frees up valuable floor space in your sump filtration area. Installing a SKIM BUDDY will further facilitate servicing/ cleaning of your protein skimmers collection cup. Features Easy Collection Container Space Saving Hang On Mount w/ Locking Bolt Clear View Design 10mm Nylon Barb Connector Specifications Dimensions 6x3x9" Capacity 2.5 liters Tank Usage 20-125g

Read more less

Aquavitro division 125 Protein Skimmer Engineered for modern reef systems up to 125 US gallons, the division 125 prioritizes stable foam production, long contact time, and ultra-quiet running in a compact footprint. Its external Sicce needle-wheel pump preserves reaction volume while a dual-chamber silencer, anti-vibration hardware, and complete microbubble removal keep your sump calm and your display crystal clear. Height-based drain regulation and a handled polycarbonate cup make tuning and maintenance fast and predictable. Features External pump layout increases reaction volume and simplifies service Dual-chamber air silencer plus anti-vibration O-rings/feet for quiet operation Height-based drain regulation for precise and repeatable foam level control Cylindrical reaction column for extended bubble contact time Complete microbubble removal via spillway sock and sponge Optional Secondary Pump Kit enables recirculating configuration and finer control Performance & Sizing Average bioload: up to 475–500 L / 125 US gal Maximum bioload (very heavy SPS): ~175 L / 50 US gal Recommended sump water height: ~14–20 cm (5.5–8 in) Specifications Height / clearance: 45 cm (17.7 in) / 47.5 cm (18.7 in) Footprint: 21 × 11.2 cm (8.2 × 4.4 in) Reaction volume: 1.9 L (0.5 US gal) Collection cup volume: 0.5 L (0.13 US gal) Pump: Sicce needle-wheel (SK 200 class) Power consumption: ~12–18 W Max air flow: ~200 L/h Max water flow: ~300 L/h Maintenance & Service Empty and rinse the cup when skimmate reaches the cup neck. Rinse the spillway sock and sponge every 1–2 weeks. Inspect and clean the pump impeller/venturi monthly; remove deposits with a mild vinegar bath as directed in the manual. Directions Place the skimmer in a sump section with 5.5–8 in of water. Fully open air and water and power on. Adjust the height-based drain so the foam line sits at the base of the cup neck. Allow several hours of break-in before fine tuning. What's Included division 125 skimmer body with cylindrical reaction column Polycarbonate collection cup with handle and drain External Sicce needle-wheel pump with venturi Dual-chamber air silencer and tubing Height-based drain assembly with spillway, sock, and sponge Compression rings, O-rings, and fittings User manual NOTE: THIS IS A CLEARANCE ITEM AND ALL SALES FINAL

Read more less