Aquavitro division 125 Protein Skimmer
Engineered for modern reef systems up to 125 US gallons, the division 125 prioritizes stable foam production, long contact time, and ultra-quiet running in a compact footprint. Its external Sicce needle-wheel pump preserves reaction volume while a dual-chamber silencer, anti-vibration hardware, and complete microbubble removal keep your sump calm and your display crystal clear. Height-based drain regulation and a handled polycarbonate cup make tuning and maintenance fast and predictable.
Features
External pump layout increases reaction volume and simplifies service
Dual-chamber air silencer plus anti-vibration O-rings/feet for quiet operation
Height-based drain regulation for precise and repeatable foam level control
Cylindrical reaction column for extended bubble contact time
Complete microbubble removal via spillway sock and sponge
Optional Secondary Pump Kit enables recirculating configuration and finer control
Performance & Sizing
Average bioload: up to 475–500 L / 125 US gal
Maximum bioload (very heavy SPS): ~175 L / 50 US gal
Recommended sump water height: ~14–20 cm (5.5–8 in)
Specifications
Height / clearance: 45 cm (17.7 in) / 47.5 cm (18.7 in)
Footprint: 21 × 11.2 cm (8.2 × 4.4 in)
Reaction volume: 1.9 L (0.5 US gal)
Collection cup volume: 0.5 L (0.13 US gal)
Pump: Sicce needle-wheel (SK 200 class)
Power consumption: ~12–18 W
Max air flow: ~200 L/h
Max water flow: ~300 L/h
Maintenance & Service
Empty and rinse the cup when skimmate reaches the cup neck. Rinse the spillway sock and sponge every 1–2 weeks. Inspect and clean the pump impeller/venturi monthly; remove deposits with a mild vinegar bath as directed in the manual.
Directions
Place the skimmer in a sump section with 5.5–8 in of water. Fully open air and water and power on. Adjust the height-based drain so the foam line sits at the base of the cup neck. Allow several hours of break-in before fine tuning.
What's Included
division 125 skimmer body with cylindrical reaction column
Polycarbonate collection cup with handle and drain
External Sicce needle-wheel pump with venturi
Dual-chamber air silencer and tubing
Height-based drain assembly with spillway, sock, and sponge
Compression rings, O-rings, and fittings
User manual
NOTE: THIS IS A CLEARANCE ITEM AND ALL SALES FINAL
USED DEMO/ OPEN BOX Hanna Freshwater Ammonia Checker Handheld Checker for Freshwater Ammonia - HI700 The Hanna Ammonia Low-Range Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration.Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Ammonia Low-Range Checker uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
Hanna Ammonia Checker – HI700 Specifications Range: 0.00 - 3.0ppm Ammonia Resolution: 0.01 ppm (mg/L) Accuracy:+/-0.05ppm +/- 5% of reading Light Source: LED @ 470nm Light Detector: Silicon Photocell Method: Adaptation of the ASTM Manual of Water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample. Operating Environment: 0-50 degrees Celsius, RH max 95% non-condensing Battery Type: 1 - 1.5v AA Auto- Shutoff: Automatically shuts off after 10 minutes of non-use. Dimensions: 86.mm x 61mm x 37.5mm (3.4" x 2.4" x 1.5") Weight: 64 grams (2.25oz) Warranty: 6 month manufacturer limited warranty
Please note that this product line is being discontinued by J&L Aquatics. Any warranty or after sales support will be dealt with directly by Innovative Marine. ALL SALES FINAL Innovative Marine Wavelink 1500 Impeler Replacement impeller for the Wavelink 1500 Desktop Powerhead.
With clean aesthetic lines and extensive product design, Reef Brite XHO High Power LED bars provide an attractive element to enhance the beauty of any aquatic biotope. Innovation is at the core of what we do at Reef Brite. Creating stunning high quality lighting and aquatic environment solutions, Reef Brite XHO High Power LED bars encompass cutting edge LED replacement technology. Utilizing 3 watt LEDs for maximum performance and output, our XHO LED units are great replacements for T5HO or VHO lighting. These versatile units can also be used to replace any standard strip light or to create a custom lighting system. Because of their unique design and optimized reflector system,Reef Brite LED lights give off very little glare, making them a high definition light source that brings out the vibrant colored details of your aquarium. It gives observers a more enjoyable viewing experience while maintaining shimmer. The ripple or shimmer effect produced by our LED units actually mimics sunlight as it penetrates into the ocean and tropical waters. Made from extruded aluminum, Reef Brite's lightweight low profile design allows XHO LED fixtures to be installed just about anywhere, making them ideal for display tanks, aquarium sumps and refugiums.Experience Xtreme performance at an affordable price. Mix multiple units to create your own Xtreme High Output Led lighting system. Stylish black anodized housing, high performance reflector system, and assembled in the U.S.A. XHO LEDs are the professionals choice.Is compatible with popular LED timers using our cable adapter kit (sold separately).They can also be controlled via APEX controllers with our APEX certified LED Interface.
Replacement Overflow Pipe for the Lifegard Aquatics 15W UV Sterilizer.This item should be replaced once every year to maintain optimal performance of you UV Sterilizer.It is also recommended to change the protective sleeve portion of the UV Sterilizer at the same time.
Neptune SKY Shimz Light Diffuser
Overview
The Neptune SKY LED was designed with a hybrid diffuser to suit the tastes of most aquarists. The hybrid includes several openings where white LEDs can shine through with no diffusion, bringing back some of the shimmer usually lost with traditional diffusers.
These openings are referred to as "Shimz". The SKY comes equipped with Clear Shimz as its default; However, those who wish to reduce shimmer even further can purchase these Diffused Shimz, which can be easily swapped in to replace the Clear Shimz installed on your SKY Light.
Ecotech Radion XR30 G6 Upgrade Kit - Pro
Overview
Upgrade Kit to turn your existing G5 XR30 Pro (or Blue) into a XR30 G6 Pro led light.
Radion G6 models are built on the same heat sink and driver platform as the equivalent Radion G5 models (XR15 or XR30). Excitingly this allows for a same model (XR15 and XR30) upgrade path for G5 to G6.
Included in upgrade kit is G6 cluster and HEI lens which together combine to create Hybrid Hemispherically Edge Illuminating (HEI2) lens system.
See documents tab for installation instructions.
Nyos Quantum 160 EQ Protein Skimmer
Why choose the Nyos Quantum 160 EQ for your reef tank
The Nyos Quantum 160 EQ combines the proven Quantum 160 skimmer body with a fully controllable 24V DC pump and smart app control delivering stable nutrient export and ultra quiet operation for medium sized reef systems up to 125 gallons.Wireless integration with Mobius and Apex Fusion lets you schedule skimmer intensity around feeding maintenance and nighttime plankton activity while built in safety logic protects your system from overflows or blockages.
Features
In sump internal protein skimmer built on the proven Quantum 160 acrylic body and reaction chamber
24V Quantum 3.0 DC pump with speed control from 1 to 100 percent for precise wet or dry skimming
Wireless control through the Mobius app or Apex Fusion via the optional MXM module for easy integration with existing Ecotech and Aqua Illumination gear
Smart preset modes including Performance Plankton Saving and Nutrient Export Reduction to match changing nutrient demands
Energy efficient low voltage European made pump using up to about 20 percent less power with roughly 10 percent more output than non controllable Quantum pumps
RGB LED status light that indicates pump speed and doubles as a cabinet flashlight during maintenance
Intelligent safety shutdown that pauses the pump and sends alerts if the intake is blocked or the skimmer overflows
Specifications
Recommended aquarium volume up to 125 gallons depending on bioload
Footprint approximately 7.1 in x 9.8 in in sump space
Height approximately 20.9 in
Pump model Quantum 3.0 24V DC controllable
Power consumption around 15W at full air draw
Skimmer type in sump internal installation only
Directions
Install the Nyos Quantum 160 EQ in a sump chamber with stable water height ideally around 8 to 10 inches then allow the unit to run with the air and water level opened conservatively during the initial break in period.Once the skimmer slime coat has formed over several days use the Mobius or Apex app to tune pump speed and select a preset mode then fine tune the water level via the skimmer outlet for your preferred wet or dry skimmate.Clean the collection cup and neck regularly to maintain consistent foam production and periodically inspect the pump intake to keep it free of salt creep and debris.
What's Included
Quantum 160 EQ Protein Skimmer
24V Quantum skimmer pump
Pump controller
RGB LED skimmer lighting
Bubble plate
Power supply
Note: MXM Module is sold separately (required for Apex integration).
The multi-light RMS offers a customizable multi light mount solution for Radion XR30 and Radion XR15 lights.RMS System Features Built-in cable management Compatible with rimmed, rimless, and eurobraced tanks Extremely rigid and light Anodized Aluminum Finish Flexible slide mounts allow for you to move and rotate your Radion position to perfectly illuminate your corals Mounts Radions optimally at approximately 7 inches 18cm above glass Flexible Design to Fit Your Needs Because the multi-light RMS is a modular system, choose the components that fit your needs. To build a mount you will need a set of arms, the right rail for your tank and the number and model of light mounts that fit your setup. Rails In All Lengths Tanks come in a lot of shapes and sizes. To accommodate the vast majority of commercially available and custom aquariums the RMS multi-light rails start at 20.5 inches and increase in 10 inch increments to 90.5 inch. The multi-light RMS allows for adjustment of the rail with respect to the arms - meaning that even if your tank is not a common length - there is a rail length that will work for you. Use this Track Length Guide to find the best solution for mounting your Radions. Mix & Match A single Multi-Light RMS setup can accommodate both XR15 and XR30 model Radions on the same rail.In order to complete your Radion Multi-Light System you will also need to purchase and 2 RMS Arms (sold in pairs), and an RMS Slide to match your Radion (either XR15, or XR30 Slide).
Nyos Quantum 300 EQ Protein Skimmer
Smart skimming for serious large volume reef tanksThe Nyos Quantum 300 EQ is built for demanding systems pairing the massive Quantum 300 skimmer body with twin controllable 24V Quantum 5.0 pumps to handle nutrient export on large reef aquariums up to 1000 gallons with precision and redundancy.Full Mobius and Apex Fusion integration lets you automate skimmer behavior across the day adjust output during feeding or maintenance and receive real time safety alerts if anything interrupts normal operation.Features
Large in sump internal protein skimmer designed for high bioload systems such as heavily stocked SPS or fish heavy reef tanks
Dual Quantum 5.0 24V DC pumps with independent controllability providing high air draw and the ability to fine tune overall performance from 1 to 100 percent output
Wireless app control via Mobius or Apex Fusion through the optional MXM module for advanced scheduling automation and interlocks
Preset modes including Performance Plankton Saving and Nutrient Export Reduction so you can quickly adapt skimmer intensity to nutrient levels and photoperiod
Energy efficient low voltage European made pumps that can reduce power draw by about 20 percent while offering roughly 10 percent more performance compared to non controllable Quantum models
Integrated RGB LED feedback ring that shows pump status and doubles as a bright cabinet light during service
Comprehensive safety logic that pauses the pumps and triggers alerts if the intake is blocked or the collection cup begins to overflow
Specifications
Recommended aquarium volume up to 1000 gallons depending on bioload
Footprint approximately 13.4 in x 16.4 in
Height approximately 26 in
Pump configuration two Quantum 5.0 24V DC controllable pumps
Power consumption around 2 x 20W at full air draw
Skimmer type in sump internal installation only
DirectionsInstall the Nyos Quantum 300 EQ in a sump section that can provide a stable water depth of roughly 8 inches and enough footprint clearance for the skimmer body and cup removal.Begin operation at a moderate combined pump speed using the Mobius or Apex app and keep the internal water level slightly lower during the first week as the skimmer breaks in then slowly increase water level and pump output to reach your desired skimmate consistency.Because the Quantum 300 EQ processes large volumes of water inspect and clean the collection cup neck pumps and air intakes frequently to maintain peak performance and quiet operation.What's Included
Quantum 300 EQ Protein Skimmer
Two 24V Quantum skimmer pumps
Pump controller
RGB LED skimmer lighting
Bubble plate
Power supply
Note: MXM Module is sold separately (required for Apex integration).
Neptune Liquid Level Sensor - 35 Inch
Overview
The Neptune LLS Sensors for your Apex controller allow for the measurement of water depth in inches or centimeters.
The Liquid Level Sensor is available in four different sizes- 4", 15" 23" and 35" with each sensor having a special place in helping understand the water level in the sump, aquarium, reservoirs, and other liquid-holding containers.
No longer do you need to physically look to see how much water level is above or below a specific point, but now simply open the Apex Fusion App and observe.
How LLS from Neptune works
The LLS sensor can connect to any available FMM port in your Apex System. Liquid will enter the plastic envelope around the thin material of the sensor. Once the liquid is in contact with the sensor material the LLS uses a patented resistive sensing technology to accurately and reliably measure the liquid level in a container. Included with each LLS sensor is a clip that allows for the mounting of the sensor to the side of the sump, aquarium or container. You can also mount the LLS sensor to a baffle inside the sump. Once calibrated the LLS is accurate to about two-tenths of an inch.
Application
The largest of the LLS sensors is the 35" sensor. This sensor is to be used for large reservoirs that are often utilized for saltwater reservoirs for manual and automatic water changes.
Application
The components in the head of the LLS are fully encapsulated in epoxy, but the LLS is not intended to be fully submerged. Care should be taken when selecting the proper length of LLS and installing it to ensure that the water level never exceeds the uppermost graduation mark.
Nyos Quantum 220 EQ Protein Skimmer
High performance control for larger reef systemsThe Nyos Quantum 220 EQ takes the flagship Quantum 220 body and pairs it with a controllable 24V Quantum 5.0 pump delivering serious nutrient export capacity for heavily stocked reef aquariums up to 500 gallons while keeping noise and energy use low.With full app based control via Mobius or Apex Fusion you can match skimmer output to feeding cycles maintenance windows and nighttime plankton activity instead of running one fixed setting around the clock.Features
In sump internal skimmer built on the proven Nyos Quantum 220 acrylic body for tanks up to roughly 500 gallons
24V Quantum 5.0 DC pump with stepless speed control from 1 to 100 percent for precise foam height and dryness
Wireless control through the Mobius app or Apex Fusion using the optional MXM module allowing schedules and interlocks with other smart equipment
Preset operating modes including Performance Plankton Saving and Nutrient Export Reduction to simplify day and night nutrient management
Energy saving 24V pump engineered in Europe that can use around 20 percent less power while delivering roughly 10 percent more performance than non controllable Quantum pumps
RGB LED feedback that displays pump speed at a glance and acts as a handy maintenance light inside the stand
Built in safety features that shut the pump down and trigger alerts if the intake is obstructed or the skimmer starts to overflow
Specifications
Recommended aquarium volume up to 500 gallons depending on bioload
Footprint approximately 9.3 in x 12.2 in
Height approximately 23.8 in
Pump model Quantum 5.0 24V DC controllable
Power consumption around 20W at full air draw
Skimmer type in sump internal installation only
DirectionsPlace the Nyos Quantum 220 EQ in a stable sump chamber with a water depth close to 8 to 10 inches and ensure the skimmer outlet is unobstructed so water can exit freely.Start the skimmer at a conservative pump speed using the Mobius or Apex app and run it with a slightly lower water level during the first week of operation while the skimmer breaks in and the system stabilizes.After the break in period gradually raise the internal water level and fine tune pump speed until you achieve a consistent dark skimmate then maintain performance by cleaning the collection cup and air intake on a regular schedule.What's Included
Quantum 220 EQ Protein Skimmer
24V Quantum skimmer pump
Pump controller
RGB LED skimmer lighting
Bubble plate
Power supply
Note: MXM Module is sold separately (required for Apex integration).
Reef Buffer is intended primarily for use in a reef system where the maintenance of a pH of 8.3 is often difficult.When used as directed Reef Buffer; will raise the pH of your reef system to 8.3 without fear of accidentally overshooting the pH to a dangerous level.Reef Buffer; will also raise carbonate alkalinity. Reef Buffer; is a blended product and is not just sodium carbonate.Reef Builder should be used to raise alkalinity when pH is not a problem.500 g treats 16,000 L (4,000 gallons).
Flipper Edge Max
OPEN BOX/DEMO UNIT
Overview
Give Yourself The Edge - The Most Advanced Handheld Aquarium Cleaner Ever Made!
Now with twice the cleaning power! Flipper Aquarium Products' patented 2-in-1 magnetic aquarium cleaner, now with dual blades, flips from Scrubber to Scraper simply by rotating its handle!
Complete aquarium cleaning without ever getting your hands wet! A "must-have" cleaning tool for advanced aquarium hobbyists and maintenance professionals!
Features
New Dual Blade Design For More Efficient Cleaning!
Interchangeable Stainless Steel and Plastic Blades for Stubborn Algae Removal and Safer Scraping Near Silicone.
New 316 Stainless Steel Blade Has a More Precise Edge Design for Flawless Scraping.
Reversible Blades Give you Twice the Normal Blade Life!
New Acrylic Safe Plastic Blades with the Option to Use a Flat or Serrated Edge.
Includes (2) Stainless Steel & (2) Acrylic Safe Plastic Blades.
Custom Cut Your Own Blades Using Old Gift / Credit Cards.
FLOATS to the Surface if the Cleaner Ever Becomes Disconnected.
Ergonomic GRIP/FLIP Handle for Easy FL!PPING from Scrubber to Scraper.
Made with Rare Earth Magnets for Incredible Cleaning Strength and Durability.
Cleans Even the Most Stubborn Coralline Algae.
Designed for cleaning aquariums with glass up to 1" (24mm) in thickness
Tips using your Flipper Edge
Flipping Works Best in Areas of the Tank with Low Water Currents.
Flip at the Top of the Tank Near the Water Surface.
Be Cautious Using Metal Blade Near Gravel Line or Aquarium Glass Sealant.
Magnets are Strong! Avoid Pinching Fingers!
Do not place your Flipper next to cell phones or other electric equipment.
ALL SALES FINAL ON OPEN BOX/CLEARANCE ITEMS. NO RETURNS, REFUNDS, OR EXCHANGES.
Flipper Cleaner Standard Float
USED NO PACKAGING
Overview
Say goodbye to your old cleaner with all it's clumsy parts. Simply scrub away soft algae with the cleaning pad. Scrape away tough algae with the scraper. It's the most versatile aquarium cleaner in the world!
Dreading putting your hands in a wet fish tankRemove algae without getting your hands involved. Who knew cleaning your tank could even be fun!
You'll never look back! Precise, powerful and agile. Daily maintenance AND tough algae removal. Compare the Flipper with other brands and see why Flipper is the best!
Flipper is made with the strongest rare earth magnets available, allowing it to clean glass and acrylic tanks up to 1/2" (12mm) in thickness. Its unique design almost completely eliminates the possibility of trapping sand particles! With an ultra-low profile, Flipper is the only dual scrubber / scraper design on the market, it is a major time-saver for daily cleaning. That's why the Flipper has quickly become a "must-have" cleaning tool for advanced hobbyists and maintenance professionals!
Features
Floats to the surface for easy retrieval.
Improved blade design for more effective cleaning
Low profile design for cleaning hard to reach areas of the tank.
Made with rare earth magnets for incredible cleaning strength and durability. Cleans even the most stubborn coralline algae.
Blade side has only 3 contact points resulting in a 3mm gap between the cleaner and the glass. This minimizes the chance of trapping sand, and thus reduces the chance of scratching, even when cleaning below the sand!.
Unique orienting buoyancy always keeps the magnets facing the glass for easy retrieval. Plus, Flipper is nearly neutral buoyancy so it does not sink like a stone if the magnets are disengaged.
Includes Stainless Steel blade for glass tanks. It is suggested to replace blades every 3-6 months to maintain optimal algae scraping.
Designed for medium sized tanks - 1/4" - 1/2" or 30-150 Gallons
ALL SALES FINAL ON OPEN BOX/CLEARANCE ITEMS. NO RETURNS, REFUNDS, OR EXCHANGES.
Aquatic Life Hybrid G1 T5/LED Light Fixture – 24 Inch
Premium Hybrid Lighting for Reef Aquariums
The Aquatic Life Hybrid G1 combines the broad-spectrum brilliance of T5 fluorescent lighting with the customizable intensity of LED modules. This 24-inch fixture is designed for reef hobbyists who demand uniform light spread, deep penetration, and modular flexibility—all in one sleek, reliable unit.
Flexible LED Integration
The Hybrid G1 features adjustable mounting brackets to accommodate a wide range of LED modules including AquaIllumination®, EcoTech Radion®, and Kessil®. This gives you complete control over your light spectrum and PAR output, letting you tailor lighting to your corals' exact needs.
Sleek Design with Smart Functionality
Powder-coated aluminum body for corrosion resistance
Individual reflectors for each T5 lamp to maximize light output
Quiet, integrated cooling fans for thermal control
Suspension hardware included for easy hanging installation
What’s Included
1x Aquatic Life Hybrid G1 24" Fixture
2x T5 HO Lamp Fixtures with Reflectors (lamps sold separately)
Universal LED brackets (LEDs not included)
Power cords and mounting accessories
Hanging kit for suspension setup**ALL SALES FINAL**
Because of the holidays online livestock ordering and shipping will be suspended from December 18th to January 2nd. Regular shipping will resume January 5th.
