AI Blade Elevated Tank Mount
Overview
An attractive and sturdy solution that raises your Blade LED above rimmed or rimless tanks to increase light spread and improve access.
Features
Adjustable height design for rimmed or rimless tanks
Enhances light distribution and tank access
Durable aluminum construction
Tool-less assembly
Non-slip silicone pads
What's Included
2x Elevated Tank Mount brackets
Mounting hardware
AI Blade Hybrid Mount Kit
Overview
Combine Blade LED strips with Aqua Illumination Hydra or EcoTech Radion pendants on a single mounting system for seamless, parallel lighting.
Features
Universal rail design for Blade and Hydra/Radion fixtures
Customizable spacing and angle
Precision-machined aluminum rails
Black anodized, corrosion-resistant finish
What's Included
2x Hybrid mount rails
4x Blade mounting clips
Mounting hardware
AI Blade Mounting Clips
Overview
Secure your Blade LED fixtures over 39" with these precision-machined aluminum mounting clips designed for fast, tool-free installation.
Features
Compatible with Blade lights over 39"
Precision-machined aluminum construction
Snap-in design for quick mounting
Black anodized, corrosion-resistant finish
What's Included
2x Blade Mounting Clips
AI Blade Mounting Solution - Large
Overview
A heavy-duty hanging solution capable of supporting up to 6 Blade LED fixtures; robust aluminum bars and adjustable supports ensure reliable, level mounting.
Features
Hangs up to 6 Blade LEDs
Durable aluminum bars with black anodized finish
Adjustable V-wire supports
Corrosion-resistant design
Compatible with HMS/RMS rails
What's Included
2x mounting bars
6x Blade mounting clips
6x V-wires
AI Blade Mounting Solution - Medium
Overview
Suspend up to 4 Blade LED fixtures with this medium hanging kit featuring sturdy aluminum bars and adjustable supports for precise alignment.
Features
Hangs up to 4 Blade LEDs
Precision-machined aluminum bars
Adjustable V-wire supports
Black anodized, corrosion-resistant finish
Compatible with HMS/RMS rails
What's Included
2x mounting bars
4x Blade mounting clips
4x V-wires
AI Blade Mounting Solution - Small
Overview
A sleek mounting solution for suspending up to 3 Blade LED fixtures; precision-machined aluminum bars and adjustable V-wires ensure a secure, level installation.
Features
Hangs up to 3 Blade LEDs
Aluminum bars with black anodized finish
Adjustable V-wire supports
Corrosion-resistant design
Compatible with HMS/RMS rails
What's Included
2x mounting bars
3x Blade mounting clips
3x V-wires
Aqua Illumination Blade Coral Glow LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 21 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 30 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 39 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 48 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 57 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Glow LED - 66 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Glow Blade LED
The Coral Glow model features a LED mix that maximizes spectral peaks in the lower range of blue and upper range of UV that showcase coral fluorescence. It's ideal as a supplemental source of "pop" that can be combined with a Blade Grow or used to augment your current lighting setup to make your aquarium truly glow. Peak performance is best achieved in a ratio of 1:2 Glow to Grow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Glow includes the following 24 diodes per cluster group:
12x Royal Blue
6x 430nm
3x 415nm
3x 405nm
Features
Available in 7 different sizes from 12 to 66 inches
Balanced spectrum optimized for coral fluorescence
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 12x Royal Blue 6x 430nm 3x 415nm 3x 405nm
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Glow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 21 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 30 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 39 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 48 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 57 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Coral Grow LED - 66 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95 degree spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Coral Grow Blade LED
The Coral Grow model brings a powerful and balanced blue and white growth spectrum with output in the deep blue through blue range (400-500 nm) to address the photosynthetic needs of corals. Use the Grow for maximum PAR output per foot, the Glow for maximum fluorescence, or mix them together and get both. Peak performance is best achieved in a ratio of 2:1 Grow to Glow, but one of each is perfectly acceptable when less light is needed. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Coral Grow includes the following 24 diodes per cluster group:
12x Royal Blue
6x Cool White
6x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced blue and white spectrum optimized for coral photosynthesis
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 6x Cool White, 12x Royal Blue, 6x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Coral Grow
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 21 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 30 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 39 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 48 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 57 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Freshwater LED - 66 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Freshwater Blade LED
The Freshwater model features a LED mix that is capable of producing a large number of spectral combinations to fit your tank's needs. It has a balanced white spectrum, a highly tunable kelvin range, and ample outputs in the Red, Blue, and Green spectrums for plant growth and vivid colors. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Freshwater includes the following 24 diodes per cluster group:
16x Cool White
4x Warm White
2x Red
2x Blue
Features
Available in 7 different sizes from 12 to 66 inches
Balanced white spectrum with highly tunable kelvin range
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 2.8" W × 0.7" H; available in 12.1", 21.1", 30.1", 39.1", 48.1", 57.1", 66.1" lengths*
LEDs (per cluster): 16x Cool White, 4x Warm White, 2x Red, 2x Blue
Power Consumption: 20-140 W at full power (model dependent)
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Freshwater
1x Power Adapter
1x Blade Tank Rest Mounting Solution (included with fixtures up to 39") or 2x Blade Mounting Clips (included with fixtures over 39")
Aqua Illumination Blade Refugium LED - 12 Inch
Overview
This is far from your typical strip LED! The Blade maximizes color and efficiency, incorporating exclusive EdgeField Optics to deliver even PAR, smooth color mixing, exceptional 95° spread, and a natural shimmer effect in your aquarium. Its wide angle and modular cluster LEDs allow light to wrap around high points in your tank to provide a smooth blanket of illumination with minimal shadowing.
When you combine 3 or more Blade strips together, the result is shadow elimination and even light distribution comparable to traditional T5 fixtures, but with greater efficiency and at a fraction of the cost!
You can also use the Blade with any existing light fixtures as supplemental or fill lighting to enhance light coverage and reduce hotspots.
Choose your color with AI Refugium Blade LED
The Refugium model features a horticultural spectrum of red and blue designed to optimize macroalgae growth. Use the Blade Refugium in your sump to support growth of nutrient-consuming macroalgae and take your biological filtration to the next level. Each AI Blade LED Strip includes roughly one light cluster group per foot of fixture length. Tight grouping and balanced diode placement contribute to the incredible balance and shimmer that the Blade platform delivers. The Blade Refugium includes the following 24 diodes per cluster group:
6x Red
6x Royal Blue
6x Cool White
6x 430nm
Features
Spectrum optimized for macroalgae growth
Mounting solutions for every tank need
Cluster group LED diodes with 95° spread
EdgeField Optics with even PAR and smooth color mixing
Minimal shadowing and natural shimmer
Great alone, stacked in parallel, or as supplemental fill lighting
IP66 Water Resistance
Passive, noiseless cooling
Smart control via MyAI or Mobius apps
Low-profile Tank Rest included or Mounting Clips included
Several different ways to mount your AI Blade
The AI Blade is designed for a myriad of mounting solutions to satisfy any system. Choose from a Tank Rest, Elevated Tank Rest, Hanging Kit, Hybrid Mount, or HMS Adapter Arm to find the perfect mounting solution for your set up.
Tank Rest - Included with all Blade lights up to 39" this low-profile mount sits directly on top of your tank and extends up to 4.5 inches on either side of the fixture.
Mounting Clips - Included with all Blade lights over 39", these clips are compatible with the AI HMS Single Arm Mount and HMS Hanging Kit rails.
Elevated Tank Rest - An attractive and sturdy tank mount for both rimmed or rimless tanks. The Elevated Tank Rest increases light spread and allows for easier access into the aquarium when compared to the standard Tank Rest.
Hanging Kit - Made from high-quality brushed aluminum with a black finish, the Hanging Kit provides an elegant solution for suspending your Blade above your aquarium. The Hanging Kit also allows you to mount 3, 4, or 6 light bars in parallel for increased coverage and streamlined aesthetics.
Hybrid Mount - A mounting solution designed to combine Blade strips with one or more Aqua Illumination Hydra or EcoTech Radion pendant fixtures. The best of all worlds, rolled into one!
Custom Mounting - If none of the above mounting options suit your fancy, the Blade also includes M8 mounting threads at each end, enabling you to easily create a custom mount with endless possibilities.
Easily Control Your AI Blade LED with Mobius or MyAI
The Blade LED can be wirelessly controlled via iOS and Android devices on either the MyAI or the Mobius app. With the app, you can customize your spectrum intensity and set custom schedules for each light, or just select from one of the in-app templates available. Both apps can be downloaded for free on Google Play and the App Store. Each Blade LED also includes onboard controls for cycling through spectrums.
Specifications
Dimensions: 12.1" L × 2.8" W × 0.7" H
LEDs (per cluster): 6x Red, 6x Royal Blue, 6x Cool White, 6x 430nm
Power Consumption: 20 W at full power
Universal Input Range: 100-240 V AC / 50-60 Hz
Cable Length: 9.8' (3 m)
PSU Regulatory Compliance: UL, CE & RoHS
Water Resistance: IP66 Rated
*tank rest adds up to 9 additional inches in lengthWhat's Included
1x AI Blade Refugium
1x Power Adapter
1x Blade Tank Rest Mounting Solution
Aqua Illumination HMS Double Arm Kit
Overview
Dual adjustable arms mount two HMS LED fixtures with tilt and pan control crafted from corrosion-resistant aluminum for versatile positioning and stable performance
Key Features
Supports two HMS LED fixtures
Independent tilt and pan adjustments
Durable corrosion-resistant aluminum arms
Tool-free locking knobs
Universal HMS rail mounting clamp
What's Included
2x HMS Double Arms
1x HMS rail clamp
Hardware pack
Aqua Illumination HMS Hanging Kit
Overview
Suspends HMS LED fixtures on corrosion-resistant stainless steel cables with precision V-wire supports for exact height alignment and sleek overhead mounting in any aquarium setup
Key Features
Adjustable stainless steel cables up to 60 inches
Precision V-wire supports for fixture leveling
Black anodized hardware resists corrosion
Tool-free length adjustments
Supports fixtures up to 15 pounds
What's Included
2x Hanging cables
4x V-wire supports
Mount adapters and hardware
Aqua Illumination HMS Hydra 26/32 Bracket
Overview
Securely mounts 26 and 32 inch Hydra LED strips to HMS rails using precision-machined corrosion-resistant aluminum brackets engineered for stable low-profile support in high-humidity aquarium environments
Key Features
Fits 26 and 32 inch Hydra LED strips
Precision aluminum corrosion-resistant construction
Tool-free snap-on installation
Low-profile design to minimize visual footprint
Secure locking mechanism for vibration-free mounting
What's Included
2x HMS Hydra 26/32 Brackets
Mounting screws and anchors
Aqua Illumination HMS Hydra 52/64 Bracket
Overview
Mounts 52 and 64 inch Hydra LED strips onto HMS rails with precision-engineered corrosion-resistant aluminum brackets for dependable low-profile support in aquatic environments
Key Features
Fits 52 and 64 inch Hydra LED strips
High-grade aluminum corrosion-resistant finish
Tool-free bracket attachment
Slim profile to maintain aquarium aesthetics
Locking clip for secure fixture hold
What's Included
2x HMS Hydra 52/64 Brackets
Hardware pack
Aqua Illumination HMS Mounting Rail (24 Inch)
Overview
24 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
24 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 24 Inch Rail
Mounting hardware
Aqua Illumination HMS Mounting Rail (36 Inch)
Overview
36 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
36 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 36 Inch Rail
Mounting hardware
Aqua Illumination HMS Mounting Rail (48 Inch)
Overview
48 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
48 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 48 Inch Rail
Mounting hardware
Aqua Illumination HMS Mounting Rail (60 Inch)
Overview
60 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
60 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 60 Inch Rail
Mounting hardware
Aqua Illumination HMS Mounting Rail (72 Inch)
Overview
72 inch corrosion-resistant aluminum rail for HMS fixtures featuring integrated bracket slots for secure low-profile mounting in aquarium applications
Key Features
72 inch length for HMS fixtures
Precision extruded aluminum build
Integrated bracket mounting slots
Corrosion-resistant anodized finish
Low-profile support rail
What's Included
1x 72 Inch Rail
Mounting hardware
Aqua Illumination HMS Power Supply Bracket
Overview
Secures HMS LED power supplies under mounting rails with corrosion-resistant aluminum bracket for space-saving installation stable support and clean aquarium profiles
Key Features
Fits standard HMS power supplies
Precision aluminum corrosion-resistant bracket
Tool-free slide-in installation
Space-saving low-profile design
Secure locking tab prevents movement
What's Included
1x HMS Power Supply Bracket
Mounting hardware
Aqua Illumination HMS Single Arm Kit
Overview
Mounts a single HMS LED fixture on an adjustable tilt and pan arm crafted from corrosion-resistant aluminum for precise positioning and reliable aquarium performance
Key Features
Supports one HMS LED fixture
Tool-free tilt and pan locking knobs
Durable corrosion-resistant aluminum arm
Universal HMS rail clamp
Heavy-duty hardware for stability
What's Included
1x HMS Single Arm
1x HMS rail clamp
Hardware pack
Aqua Illumination Hydra 32/64 Flex Arm
Overview
Adjustable tilt and pan arm supporting 32 and 64 inch Hydra LED fixtures crafted from corrosion-resistant aluminum for precise positioning and vibration-free stability
Key Features
Supports 32 and 64 inch Hydra LED fixtures
Tool-free tilt and pan adjustments
Durable corrosion-resistant aluminum build
Heavy-duty locking knobs
Universal HMS rail clamp
What's Included
1x Hydra 32/64 Flex Arm
1x HMS rail clamp
Hardware pack
Aqua Illumination Hydra 32/64 Lens
Overview
Genuine replacement lens for Aqua Illumination LED lights. This lens works as a replacement for the following LED aquarium lights:
AI Prime 16HD
AI Hydra 32
AI Hydra 64
Aqua Illumination Hydra 32HD LED - Black
AI Hydra 32HD LED Black
Overview
The newest innovation in the AI Hydra line, the Hydra 32HD Series brings more power and color where you want it, while being more compact and offering water resistance-all controllable via the myAI app. No longer are you limited to a fixed amount of power per channel; the HD dynamically adjusts power available to each color, borrowing from unused channels to deliver the most vivid spectrum your tank has ever seen. The Hydra HD Series produces a limitless number of spectral combinations to fit your tank's exacting needs, and with built-in control there's no need for an external controller-use your iOS, Android, or internet-connected device to manage one or multiple units from anywhere in the world.
Hydra 32HD Moonlight
A dedicated moonlight channel delivers realistic, independent lunar illumination without affecting your coral's daytime schedule.
Hydra 32HD Power Output
Building on AI's world-class LEDs, the Hydra 32HD draws only 90 W from the wall, maintaining the family's hallmark efficiency.
Optics Hydra 32HD
Includes 80° TIR lenses for optimal balance of power and spread; custom-designed for >90 % optical efficiency and enhanced color blending.
Hydra 32HD LEDs per Cluster
4 - Cool White
4 - Blue
4 - Royal Blue
1 - Photo Red
1 - Green
1 - Violet
1 - UV
1 - Moonlight
Specifications
Dimensions: 7.28" × 5.375" × 1.42"
Power Consumption: 90 W
Cable Length: 10 ft
Includes: AI Hydra 32 HD, Power Adapter, Quick Start Guide
Aqua Illumination Hydra 64HD LED - Black
AI Hydra 64HD LED Black
Overview
The newest innovation in the AI Hydra line, the Hydra 64HD Series brings more power and color where you want it, while being more compact and offering water resistance-all controllable via the myAI app. No longer are you limited to a fixed amount of power per channel; the HD dynamically adjusts power available to each color, borrowing from unused channels to deliver the most vivid spectrum your tank has ever seen. The Hydra HD Series produces a limitless number of spectral combinations to fit your tank's exacting needs, and with built-in control there's no need for an external controller-use your iOS, Android, or internet-connected device to manage one or multiple units from anywhere in the world.
Hydra 64HD Moonlight
A dedicated moonlight channel delivers realistic, independent lunar illumination without affecting your coral's daytime schedule.
Hydra 64HD Power Output
Building on AI's world-class LEDs, the Hydra 64HD draws up to 135 W from the wall, following the family's hallmark efficiency.
Optics Hydra 64HD
Includes 80° TIR lenses for optimal balance of power and spread; custom-designed for >90 % optical efficiency and enhanced color blending.
Hydra 64HD LEDs per Cluster
4 - Cool White
4 - Blue
4 - Royal Blue
1 - Photo Red
1 - Green
1 - Violet
1 - UV
1 - Moonlight
Specifications
Dimensions: 11.875" × 5.375" × 1.42"
Power Consumption: 135 W
Cable Length: 10 ft
Includes: AI Hydra 64 HD, Power Adapter, Quick Start Guide
Aqua Illumination Hydra 64HD LED - White
AI Hydra 64HD LED White
Overview
The newest innovation in the AI Hydra line, the Hydra 64HD Series brings more power and color where you want it, while being more compact and offering water resistance-all controllable via the myAI app. No longer are you limited to a fixed amount of power per channel; the HD dynamically adjusts power available to each color, borrowing from unused channels to deliver the most vivid spectrum your tank has ever seen. The Hydra HD Series produces a limitless number of spectral combinations to fit your tank's exacting needs, and with built-in control there's no need for an external controller-use your iOS, Android, or internet-connected device to manage one or multiple units from anywhere in the world.
Hydra 64HD Moonlight
A dedicated moonlight channel delivers realistic, independent lunar illumination without affecting your coral's daytime schedule.
Hydra 64HD Power Output
Building on AI's world-class LEDs, the Hydra 64HD draws up to 135 W from the wall, following the family's hallmark efficiency.
Optics Hydra 64HD
Includes 80° TIR lenses for optimal balance of power and spread; custom-designed for >90 % optical efficiency and enhanced color blending.
Hydra 64HD LEDs per Cluster
4 - Cool White
4 - Blue
4 - Royal Blue
1 - Photo Red
1 - Green
1 - Violet
1 - UV
1 - Moonlight
Specifications
Dimensions: 11.875" × 5.375" × 1.42"
Power Consumption: 135 W
Cable Length: 10 ft
Includes: AI Hydra 64 HD, Power Adapter, Quick Start Guide
Hydra Edge 44HD HMS Adapter Kit - Secure Mounting for Your Hydra Edge 44HD
Seamless Compatibility Your Hydra Edge Lighting System
Overview
The Hydra Edge 44HD HMS Adapter Kit is the perfect solution for securely mounting your Hydra Edge 44HD or Hydra Edge 44HD Freshwater light using*AquaIllumination's HMS (Hanging Mounting System)**. Designed to integrate seamlessly with existing*HMS mounts, flex arms, and hybrid mounting solutions**, this adapter kit ensures*stability, flexibility, and precision positioning*for optimal tank coverage.
Whether you're installing a single fixture or integrating multiple lights, the*HMS Adapter Kit*allows for*easy, adjustable positioning**, ensuring*uniform lighting and the best possible coral growth and aesthetics**.
Features
Designed Hydra Edge 44HD and 44HD Freshwater
This adapter kit is*custom-built*for the Hydra Edge 44HD and Hydra Edge 44HD FW, ensuring a*perfect fit and reliable support*when mounted to AquaIllumination's HMS system.
Compatible with Multiple Mounting Solutions
The Hydra Edge 44HD HMS Adapter Kit is designed for*maximum compatibility**, allowing you to use your*Hydra Edge 44HD with the following mounting options**:
HMS Single Tank Mount - Ideal for mounting one light fixture securely above your aquarium.
HMS Multi-Light Rail - Perfect for multi-fixture setups, ensuring even lighting across larger tanks.
HMS Hanging Kit - Provides a sleek, suspended mounting option for a modern, minimalist look.
Hybrid Mounting Kit - Allows integration with hybrid lighting setups.
Top & Back Mounting Brackets Included
This kit includes*both top and back mount "C" brackets**, giving you*flexibility in positioning your Hydra Edge 44HD**. Whether you prefer a*rear-mount or top-mount installation**, this kit ensures the best placement for your tank's needs.
Adjustable Positioning Optimal Light Coverage
The*C-bracket system*allows for*precise angle adjustments**, helping you achieve*the perfect light distribution*for your coral or freshwater plants. Reduce*hot spots and shadows*while maximizing*even PAR output*across your aquarium.
Durable, High-Quality Construction
Made from*high-quality materials**, the*HMS Adapter Kit*ensures*long-lasting durability and corrosion resistance*in marine and freshwater environments.
Technical Specifications
Compatibility: Hydra Edge 44HD and Hydra Edge 44HD FreshwaterMounting Options: HMS Single Tank Mount, HMS Multi-Light Rail, HMS Hanging Kit, Hybrid Mounting KitIncluded Components: Top Mount "C" Bracket, Back Mount "C" BracketMaterial: High-durability metal for long-term useManufacturer: AquaIllumination (AI)UPC: 704335295345Why Choose Hydra Edge 44HD HMS Adapter Kit?
*AquaIllumination is a leading brand*in the aquarium lighting industry, known for*innovation, reliability, and high-performance equipment**. The*HMS Adapter Kit*is designed to make mounting*your Hydra Edge 44HD as easy and secure as possible**, ensuring*a clean, professional look with superior functionality**.
**Seamless integration*with HMS mounting solutions
**Adjustable positioning*for precise light coverage
**Includes both top and back "C" brackets*for flexible installation
**High-quality construction*for long-term durability
**Designed specifically for Hydra Edge 44HD and 44HD FW**
Order Yours Today!
Ensure your*Hydra Edge 44HD*is mounted*securely and correctly*with the*Hydra Edge 44HD HMS Adapter Kit**. Designed for*ultimate flexibility, durability, and compatibility**, this adapter kit is a must-have for*seamless aquarium lighting installation**.
Order now and complete your Hydra Edge 44HD setup with the perfect mounting solution!
Aqua Illumination Hydra Edge 44HD LED
Revolutionizing Reef Lighting with Cutting-Edge Technology
Overview
The Hydra Edge 44HD is the latest evolution in aquarium lighting from AquaIllumination (AI), designed to bring a seamless blend of power, efficiency, and customization to your reef tank. Featuring state-of-the-art optics, a revolutionary light engine, and industry-leading control options, the Hydra Edge 44HD is built to optimize coral health, enhance coloration, and provide an immersive aquatic experience.
Unlike traditional fixtures, this lighting system integrates both point-source and panel-style illumination, ensuring a balanced, natural light spread with dynamic shimmer effects. Whether you're growing delicate SPS corals or vibrant LPS and soft corals, the Hydra Edge 44HD delivers the perfect spectrum for optimal coral fluorescence and growth.
Features
Hybrid Optical System Exceptional Light Distribution
Built with EdgeField Optics and a dedicated Solar Ring, it combines the focused intensity of a point source with the uniform coverage of a panel-style fixture, eliminating hot spots and shadowing for consistent, even illumination across your reef. With a 100° spread covering up to 30" × 30", it delivers seamless color transitions and intensity.
Advanced Full-Spectrum LED Performance
10 Blue LEDs - Enhancing coral fluorescence and deep-sea aesthetics.
6 Royal Blue LEDs - Replicating natural reef conditions.
8 Violet LEDs - Stimulating coral photosynthesis and coloration.
10 Cool White LEDs - Providing a balanced daylight effect.
2 Warm White LEDs - Adding depth and natural shading.
8 UV LEDs - Boosting coral pigmentation and growth.
HyperDrive (HD) Technology Maximum Efficiency
HyperDrive (HD) technology automatically reallocates unused power from one LED channel to another, allowing you to push spectrums beyond standard output limits while maximizing power efficiency.
Dedicated Moonlight Mode Natural Nighttime Simulation
A dedicated 2300K moonlight channel ensures a natural lunar cycle, regulating coral and fish behavior while providing a stunning nighttime viewing experience.
Smart Wireless Control with Mobius, myAI & Fusion (MXM)
Fully compatible with AI's Mobius app for seamless wireless programming and integration with other AI devices via myAI and Fusion (MXM).
Versatile Mounting Options Any Setup
Designed for easy installation on any tank configuration using HMS arm kits, Flex Arm (with C-Bracket), or Hybrid Mounts.
Technical Specifications
Dimensions: 11.25" × 6" × 1.06"
Wattage: 95W
Optic Spread: 100°
Coverage Area: Up to 30" × 30"
Control: Mobius, myAI, Fusion (MXM)
Mounting: HMS, Flex Arm, Hybrid (C-Bracket)
Warranty: 1 Year (US Parts & Labor)
Made in USA (Bethlehem, PA)
Why Choose Hydra Edge 44HD?
AquaIllumination's legacy of expert-driven design and cutting-edge technology means unmatched performance, coral growth, and color enhancement-backed by industry-leading customer support.
Designed by experts, built for reef enthusiasts
Proven coral growth and color results
Superior quality at a competitive price
Order Yours Today!
Take your reef tank to the next level with the Hydra Edge 44HD-order now for the ultimate marine lighting experience!
Hydra Edge 68HD HMS Adapter Kit - Secure Mounting for Your Hydra Edge 68HD
Seamless Compatibility Your Hydra Edge Lighting System
Overview
The Hydra Edge 68HD HMS Adapter Kit is the perfect solution for securely mounting your Hydra Edge 68HD or Hydra Edge 68HD Freshwater light using*AquaIllumination's HMS (Hanging Mounting System)**. Designed to integrate seamlessly with existing*HMS mounts, flex arms, and hybrid mounting solutions**, this adapter kit ensures*stability, flexibility, and precision positioning*for optimal tank coverage.
Whether you're installing a single fixture or integrating multiple lights, the*HMS Adapter Kit*allows for*easy, adjustable positioning**, ensuring*uniform lighting and the best possible coral growth and aesthetics**.
Features
Designed Hydra Edge 68HD and 68HD Freshwater
This adapter kit is*custom-built*for the Hydra Edge 68HD and Hydra Edge 68HD FW, ensuring a*perfect fit and reliable support*when mounted to AquaIllumination's HMS system.
Compatible with Multiple Mounting Solutions
The Hydra Edge 68HD HMS Adapter Kit is designed for*maximum compatibility**, allowing you to use your*Hydra Edge 68HD with the following mounting options**:
HMS Single Tank Mount - Ideal for mounting one light fixture securely above your aquarium.
HMS Multi-Light Rail - Perfect for multi-fixture setups, ensuring even lighting across larger tanks.
HMS Hanging Kit - Provides a sleek, suspended mounting option for a modern, minimalist look.
Hybrid Mounting Kit - Allows integration with hybrid lighting setups.
Top & Back Mounting Brackets Included
This kit includes*both top and back mount "C" brackets**, giving you*flexibility in positioning your Hydra Edge 68HD**. Whether you prefer a*rear-mount or top-mount installation**, this kit ensures the best placement for your tank's needs.
Adjustable Positioning Optimal Light Coverage
The*C-bracket system*allows for*precise angle adjustments**, helping you achieve*the perfect light distribution*for your coral or freshwater plants. Reduce*hot spots and shadows*while maximizing*even PAR output*across your aquarium.
Durable, High-Quality Construction
Made from*high-quality materials**, the*HMS Adapter Kit*ensures*long-lasting durability and corrosion resistance*in marine and freshwater environments.
Technical Specifications
Compatibility: Hydra Edge 68HD and Hydra Edge 68HD FreshwaterMounting Options: HMS Single Tank Mount, HMS Multi-Light Rail, HMS Hanging Kit, Hybrid Mounting KitIncluded Components: Top Mount "C" Bracket, Back Mount "C" BracketMaterial: High-durability metal for long-term useManufacturer: AquaIllumination (AI)UPC: 704335295345*AquaIllumination is a leading brand*in the aquarium lighting industry, known for*innovation, reliability, and high-performance equipment**. The*HMS Adapter Kit*is designed to make mounting*your Hydra Edge 68HD as easy and secure as possible**, ensuring*a clean, professional look with superior functionality**.
**Seamless integration*with HMS mounting solutions
**Adjustable positioning*for precise light coverage
**Includes both top and back "C" brackets*for flexible installation
**High-quality construction*for long-term durability
**Designed specifically for Hydra Edge 68HD and 68HD FW**
Order Yours Today!
Ensure your*Hydra Edge 68HD*is mounted*securely and correctly*with the*Hydra Edge 68HD HMS Adapter Kit**. Designed for*ultimate flexibility, durability, and compatibility**, this adapter kit is a must-have for*seamless aquarium lighting installation**.
Order now and complete your Hydra Edge 68HD setup with the perfect mounting solution!
Aqua Illumination Hydra Edge 68HD LED
Next-Generation Aquarium Lighting Ultimate Coral Growth
Overview
The Hydra Edge 68HD is the most powerful addition to the new Hydra Edge series by AquaIllumination (AI). Designed for reef enthusiasts who demand maximum coverage, high-intensity illumination, and unparalleled spectral control, this advanced LED lighting system provides the ultimate balance between performance, efficiency, and customization.
Unlike traditional fixtures, the Hydra Edge 68HD integrates both point-source and panel-style illumination, ensuring a balanced, natural light spread with dynamic shimmer effects. Ideal for deep reef tanks and large coral displays, the Hydra Edge 68HD enhances coral fluorescence, polyp extension, and overall growth while delivering a stunning reef aesthetic.
Features
Hybrid Optical System Superior Light Distribution
The Hydra Edge 68HD is built with EdgeField Optics and a dedicated Solar Ring, delivering exceptional light coverage with minimized shadowing. This combination of point-source shimmer and panel-style uniformity creates a natural underwater lighting effect that enhances coral vibrancy. With a 100° spread, it covers an expansive 30" × 30" area, ideal for deep tanks requiring higher PAR values and stronger spectral penetration.
Full-Spectrum LED Power Maximum Coral Health
16 Blue LEDs - Enhancing coral fluorescence and deep ocean aesthetics.
12 Royal Blue LEDs - Replicating natural reef conditions.
14 Violet LEDs - Stimulating photosynthesis and pigmentation.
10 Cool White LEDs - Providing balanced daylight.
2 Warm White LEDs - Adding depth and natural shading.
14 UV LEDs - Boosting pigmentation and vibrancy.
The Solar Blue Spectrum is fine-tuned to replicate natural reef lighting, perfect for SPS, LPS, and soft corals. Customizable settings let you adjust spectrum and intensity to showcase the most stunning coral colors.
HyperDrive (HD) Technology Enhanced Efficiency
HyperDrive (HD) technology reallocates unused power from one channel to another, allowing you to boost specific spectrums beyond standard output while maintaining optimal power efficiency.
Dedicated Moonlight Mode Realistic Nighttime Simulation
A dedicated 2300K moonlight channel simulates natural lunar cycles, regulating coral and fish behavior and providing a serene nighttime viewing experience.
Smart Wireless Control with Mobius, myAI & Fusion (MXM)
Fully compatible with AI's Mobius app for wireless programming, schedule customization, and device integration via myAI and Fusion (MXM).
Flexible Mounting Options Any Setup
Supports HMS Single & Multi-Arm, Hanging Kits, Flex Arm (with C-Bracket), and Hybrid Mounts for easy installation on nearly any tank configuration.
Technical Specifications
Dimensions: 15.25" × 6" × 1.06"
Wattage: 135W
Optic Spread: 100°
Coverage Area: Up to 30" × 30"
Control Options: Mobius, myAI, Fusion (MXM)
Mounting: HMS, Flex Arm, Hybrid (C-Bracket)
Warranty: 1 Year (US Parts & Labor)
Made in USA (Bethlehem, PA)
Why Choose Hydra Edge 68HD?
AquaIllumination's legacy of expert-driven design and cutting-edge technology delivers unmatched coral growth, color enhancement, and industry-leading support.
Designed for maximum coral health, color, and growth
Customizable spectrum for fine-tuned reef lighting
Superior build quality with AI's customer support
Competitive pricing for high-performance solutions
Order Yours Today!
Elevate your reef tank with the Hydra Edge 68HD-order now for professional-grade marine lighting!
