Reef Crest Aqua WELD is a unique thermoplastic polymer made up of small plastic beads which melt at around 60 degrees Celsius.By heating these beads in hot water the aquarist can easily melt the pellets to form a transparent flexible material. Once melted the opaque white pellets fuse together, become transparent and soften. You can then use it to fuse dry rockscapes, repair broken plastic components, and virtually anything else you want together for a lasting and very strong bond. Features: Re-usable as many times as required Great for aquascaping and general DIY work. 100% non-toxic Very strong once hard Easy to mold by hand - no sticky residue Cures in minutes underwater Safe for both freshwater and saltwater aquariums. Directions: Determine how much Aqua WELD you will require to perform the task (when using Aqua WELD, keep in mind that it is similar to using two-part epoxy, but without the mess, and tank clouding).Heat some water in a microwave to approx. 60 C (approx. 1-2min in a 1200W microwave), or to just below boiling, and pour in the pellets. Allow the pellets to become transparent (usually takes 10-15 seconds)Remove from the water with a utensil (a fork works best) and mold the Aqua WELD around the pieces you want to fuse together. As the mixture cools it will harden in place, but you can reheat it in order to reshape.1000ml Container contains 600 Grams (net weight) of Aqua WELD.
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 23 frags Dimensions: 9.5 x 4.1 x 1.8in (L X W XH)
Frag Rack for the placement of corals.Consists of a highly porous ceramic stone with a Live Rock Function, and has indentations to accommodate approximately 8 coral fragments as well as Reef Plugs (approx. diameter of 11mm/.43").Suitable for fresh and sea water.It enables the highly decorative integration on the aquarium glass pane. Thanks to the two strong magnetic holders, the Coral Rack long is suitable for aquariums with a glass thickness of up to 12 mm (1/2").Under water it can be loaded with corals up to approx. 2 kg (4.4 lbs) dry weight with a glass thickness of up to 12 mm (1/2"). With 15 mm (2/3") it can only be loaded with a dry weight of up to 0.8 kg (1.8 lbs).Dimensions (L x W x H) approx.: 240 x 100 x 140 mm (9.5" x 3.9" x 5.5").
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems.The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals.Available in 3 models.Features & Specifications Slim Profile Special membrane locks frag plugs in place Strong magnet mount holds up to 1/2in thick! Securely Holds Most Frag Plugs With Stems Up to 3/8" diameter Holds up to 8 frags Dimensions: 9.5 x 4.8 x 1.8in (L X W XH)
Frag Rack for the placement of corals.Consists of a highly porous ceramic stone with a Live Rock Function, and has indentations to accommodate approximately 6 coral fragments as well as Reef Plugs (approx. diameter of 11mm/.43"). Suitable for fresh and sea water.It enables the highly decorative integration on the aquarium glass pane. Thanks to the strong magnetic holder, the Coral Rack nano is suitable for aquariums with a glass thickness of up to 15 mm (2/3").Under water it can be loaded with corals up to approx. 1 kg (2.2 lbs) dry weight with a glass thickness of up to 12mm (1/2"). With 15 mm (2/3") it can only be loaded with a dry weight of up to 0.5 kg (1.1 lbs).Dimensions (L x W x H) approx.: 180 x 60 x 130 mm (7.1" x 2.4" x 5.1").
BSI IC-Maxi-Cure Extra Thick Cyanoacrylate Glue - 8oz Maxi-Cure extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE is usually the least expensive option for this application. Directions for Using BSI Maxi-Cure Coral Frag Glue Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220F. Soak extender tip in acetone for cleaning.
The Gryphon AquaSaw Diamond Band Saw is the latest bandsaw from Gryphon Corporation, the company that invented the whole concept of cutting glass with a band saw over thirty years ago. The Gryphon Aquasaw Diamond Band saw's hallmarks are very fast cutting and the best reliability in the industry for cutting corals and coral frags.Features Simple construction with few moving parts New High Speed Motor for fastest cutting available Direct drive - no belts or pulleys Powerful anodized motor located on top, away from the water High Quality Stainless Steel Diamond Coated blade Huge water reservoir under the work surface One square foot of unobstructed work surface Under table blade guide and new blade guide above table. Stainless Collars for wheels Metal parts are stainless steel or hard anodized aluminum. Stainless Blade Specifications Motor: 1/3 hp Direct Drive DC Maximum Clearance: 2.5" (3.75" with Upper Guide Removed) Blade Speed: 40 mph Platform Area: One Square Foot Weight: 18.0 lbs Coolant System: Recirculating tap water Coolant Reservoir: 10 inches by 9 inches Tension Adjustment: Single Knob - Semi-automatic Blade Dimensions: 37" circumference, .020" wide, .140" deep Warranty on saw : 1 year manufacturer
BSI Replacement Cap for 2 oz Glue Bottles Replacement combination of top and screw-on cap that has a built-in pin for Pocket CAs. Will fit on BSI Pocket CA bottles only.Can also be used on Oceans Wonders 1 and 2oz glue bottles.
The IceCap Frag Transport Container is the perfect way to commute coral frags safely from one location to another. It is the ideal companion to bring with you on trips to your local fish store, frag swap, club meeting, or aquarium show!Hold Up to 8 Frags - Even If They Have Different Sized Plugs!The IceCap Transport Container is a water-tight container that holds up to 8 coral frags. Inside the container sits a round frag rack with 8 cut-outs to hold your frags. Each cut-out has a special membrane inside to lock your frags in place. In the center of the frag rack is a post with a handle on top so you can easily lift and lower the rack into the carrier without getting your hands wet. The post and flat-handle top also keep the rack from moving around inside the carrier. The rack itself does not rest on the bottom of the carrier. There are feet on the bottom so your plugs have space to slide in and stay put instead of getting pushed back up and out of the tray.The IceCap Coral Frag Transport Container has a screw-on gasket sealing lid to lock your corals safe inside so you won't have to ever worry about leaks. Each hole is numerically labeled so you can keep track of what type of coral is in each position. Another benefit of the membranes inside the plug holders is that they are able to accommodate a variety of different sized frag plugs. We have all had that experience of buying a coral that comes on a plug that won't fit in our frag rack. With these special membranes, you won't have that problem with the IceCap Coral Frag Transport Container. The IceCap Frag Transport Container is a Perfect Coral Dipping StationThe Coral Frag Transport Container is a versatile frag transport system. Not only can you safely bring corals with you when you travel, but the carrier itself lends itself perfectly for dipping and acclimating new corals once you get home. You can use the carrier to bathe and disinfect new corals with coral dip before introducing them to your aquarium. You can even quarantine an existing frag from your system inside the carrier to cleanse it if you suspect or observe pests or disease.What's Included Frag transport container Frag tray Specifications Dimensions: 4.84" (123mm) wide x 3.5" (88mm) high Volume; 0.28 Gallons / 1.05 Litres
The Gryphon AquaSaw Diamond Band Saw is the latest bandsaw from Gryphon Corporation, the company that invented the whole concept of cutting glass with a band saw over thirty years ago. The Gryphon Aquasaw Diamond Band saw's hallmarks are very fast cutting and the best reliability in the industry for cutting corals and coral frags.Features Simple construction with few moving parts New High Speed Motor for fastest cutting available Direct drive - no belts or pulleys Powerful anodized motor located on top, away from the water High Quality Stainless Steel Diamond Coated blade Huge water reservoir under the work surface One square foot of unobstructed work surface Under table blade guide and new blade guide above table. Stainless Collars for wheels Metal parts are stainless steel or hard anodized aluminum. Stainless Blade Specifications Motor: 1/3 hp Direct Drive DC Maximum Clearance: 4.5" (5.75" with Upper Guide Removed) Blade Speed: 40 mph Platform Area: One Square Foot Weight: 18.0 lbs Coolant System: Recirculating tap water Coolant Reservoir: 10 inches by 9 inches Tension Adjustment: Single Knob - Semi-automatic Blade Dimensions: 42" circumference, .020" wide, .140" deep Warranty on saw : 1 year manufacturer
Replacement Diamond Saw blade for the Gryphon C-40 Bandsaw.Single 301SS Diamond Blade.A standard stainless steel based diamond blade for all Gryphon Band Saws and any other saw using a 37" blade. The stainless steel blade is designed specifically for use on our C-40 CR Aquasaw when used to cut certain corals.For all other C-40 applications, please order the standard copper 301BD blade.Note that this blade does not fit the Aquasaw XL or the C-40 Tall. For those applications please select a 42" blade.
BSI Glue Extender Tips - 6 Pack For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.Will also work the Oceans Wonders 1 and 2oz Glue Bottles.
