Fleece Filters & Pads

Red Sea ReefMat 500 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 500. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 28m / 92 feetWidth: 11.3cm / 4.4"

Read more less

Red Sea ReefMat 1200 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 1200. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 35m / 115 feetWidth: 17cm / 6.7"

Read more less

Klir 50 Micron Fleece Filter Roll - 4 Inch Klir Fleece Filter Roll 4 Inch Overview The Klir Di-4 Fleece Roll boasts an impressive quantity of filtering material and provides months of service. Replacement rolls are economical and easy to replace. Each 4 Inch roll is 25 meters long and is 50 microns.

Read more less

Bubble Magus Auto Filter Roll Overview Replacement filter roll for the Bubble Magus Auto Roll Filter. Fits both Gen1 and Gen 2 fleece filters.

Read more less

Clarisea SK-5000 XL Fleece Roll - 40m Overview Quick-Change replacement fleece for ClariSea SK-5000. Extra-long 40 m roll boosts time between changes and stops with a tail for simple reloads. Features XL length: 40 m (≈131 ft) for extended service Width: 15 cm (6") Quick-Change roll leaves a ~10" tail for easy stapling to the new roll Improved flow and dirt capture; reduced skimmer foaming on change-over Made in Europe from 100% recyclable polypropylene Specifications Compatibility: ClariSea SK-5000 (Gen 2 & Gen 3) Roll length: 40 m; roll width: 6" UPC/EAN: 5060444553130

Read more less

Klir 50 Micron Fleece Filter Roll - 7 Inch Klir Fleece Filter Roll 7 Inch Overview The Klir Di-7 Fleece Roll boasts an impressive quantity of filtering material and provides months of service. Replacement rolls are economical and easy to replace. Each 7 Inch roll is 50 meters long and is 50 microns.

Read more less

Clarisea SK-3000 XL Fleece Roll - 40m Overview Quick-Change replacement fleece for ClariSea SK-3000. Extra-long 40 m roll maximises run time between changes and is designed to stop with a tail for easy stapling to the new roll—no wet hands. Features XL length: 40 m (≈131 ft) for extended service Width: 10 cm (4") Quick-Change design leaves a ~10" tail for fast reloads Improved flow and dirt removal; reduced skimmer impact after changes Made in Europe from 100% recyclable polypropylene Specifications Compatibility: ClariSea SK-3000 (Gen 2 & Gen 3) Roll length: 40 m; roll width: 4" UPC/EAN: 5060444554731

Read more less

Durable, reusable filter media for any filtration method in marine or freshwater aquariums. Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system. Aqua Mesh filter media has many other unique applications including vibration reduction, temporary baffles or sump refugium separation. Aqua Mesh Black filter media is designed to be used as the first stage (if using all four), and will trap large sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Red Sea ReefMat 1200 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 1200 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive-unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 1200 liters (315 gallons) Maximum Flow: 9000 liters / 2380 gallons per hour Fleece Mat Width: 17cm / 6.7" Fleece Mat Length: 35m / 115 feet Unit Dimensions: 27 x 30 x 48cm / 10.6" x 11.8" x 18.9" Media Basket Size: 700ml

Read more less

Red Sea ReefMat 500 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 500 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive- unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 500 liters (130 gallons) Maximum Flow: 6000 liters / 1580 gallons per hour Fleece Mat Width: 11.3cm / 4.4" Fleece Mat Length: 28m / 92 feet Unit Dimensions: 21 x 27 x 42cm / 8.3" x 10.6" x 16.7" Media Basket Size: 350ml

Read more less

Red Sea ReefMat Sump Modification Kit Overview Sump modification kit for G1 Reefers to in stall the ReefMat Fleece Filter Everything you need to make your installation fast and easy

Read more less

Durable, reusable filter media for any filtration method in marine or freshwater aquariums. Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system. Aqua Mesh filter media has many other unique applications including vibration reduction, temporary baffles or sump refugium separation.Aqua Mesh Blue filter media is designed to be used as the third stage (if using all four), and will trap smaller to medium sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Klir Di-4 Fleece Filter - Version 2 Overview The Klir Filter automatically unrolls new filtering material, removing suspended particles from your aquarium and producing crystal clear water. The Patent Pending Klir Fleece Filter Di-4 fits directly into most 4in filter sock chambers that automatically unrolls new material as it gets clogged, removing suspended particles from your aquarium and producing crystal clear water. Enjoy maintenance-free aquarium filtration for months at a time. Klir filter is a direct replacement filter socks on sumps with sock trays. Simply remove your sock and insert the Klir. As water passes through the Klir filter and the filtering material becomes saturated with waste, the water level will begin to rise. When the water makes contact with the optical sensor, a motor is activated to advance clean filtering material. As clean material is exposed, water is now able to flow freely, lowering the water level in the sock tray and deactivating the motor. Benefits Easy drop-in installation - no plumbing required. No additional sump space is needed. Results in crystal clear water filtered down to 50-microns - double the filtering capacity of most filter-socks. Waste is removed from the water column before it has time to breakdown, helping to maintain low nutrient parameters! The constant chore of monitoring and swapping filter socks or other mechanical media every few days is eliminated for months at a time. Once the filtering media is exhausted, replacing it is a snap and very economical. Features New upgraded Version 2 Klir Smart ControllerTriple Optical Magnet Mount SensorEasy drop-in installation even in tight spotsFully automatic with smart controllerCompact and directly replaces 4-inch filter socksHolds 25 yards of 50- Micron fleeceCapable of filtering up to 750 GPH per unitRemovable lid with carbon insert for noise and odorsExpandable to dual units for higher flow rates-4 Fleece Filter Sump RequirementsSump with sock-tray (or use the Klir Filter Bracket) Capable of holding 1.5 inches of water above the tray8.125 inches of available space below the tray7.125 inch sump lid opening directly above the filter socksWhat's Included Klir 4" Drop-In Automatic Fleece Filter 3.9" Swappable Collar 4.25" Swappable Collar Version 2 Smart Controller & Magnet-mount Sensor 25-Yard Roll of 50-Micron Fleece Activated Carbon Insert DC Geared Motor (DC12V/.06A)

Read more less

Red Sea ReefMat 250 Filter Rolls Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea ReefMat 250. See your ReefBeat app to know when to change your rolls as each system is different. Specifications Length: 32m / 105 feetWidth: 8.13cm / 3.2"

Read more less

Durable, reusable filter media for any filtration method in saltwater or marine aquariums.Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system.Aqua Mesh Grey filter media is designed to be used as the fourth stage (if using all four), and will trap smaller sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Red Sea NanoMat Filter Rolls - 2 Pack Overview Efficient, high-flow, skimmer friendly, 50 g/m2 non-woven polyester fleece mat rolls specifically designed for the Red Sea NanoMat2 replacement NanoMat fleece rolls are included Specifications Length: 18m / 59 feetWidth: 5.5cm / 2.16"

Read more less

Bubble Magus Auto Roll Filter G2 Overview No more filter socks! The 2nd Generation Bubble Magus Auto Roll Filter (ARF) removes the need for filter socks. Water is fed into the internal chamber via the aquarium systems drain, and through the filter roll. When the water level rises in the chamber due to the filter media clogging, the increased water level triggers the float switch which causes the motor to wind the filter roll to a place where a new fresh piece of filter media is in the path of the water. The water level will then drop repeating the process. Features FeaturesManual buttonError LED lightMoisture resistance Imperial pipe connections Molded brackets Specifications 12v DC motor 110v Power adapter ULc DC12v 1amp output Water level switch Filter roll Non woven 150mm width, 25M length 1" I.D inlet pipe, complete with Flex pipe 40 x 36 x 26cm total dimensions (including motor body) 15.75" x 14.17" x 10.23" total dimensions (including motor body) Internal sump mounted

Read more less

Durable, reusable filter media for any filtration method in saltwater or marine aquariums.Perfect in wet dry applications, or for use as a pre-filter. Each piece comes in a large 19" x 24" sheet that can be easily cut to fit any filtration system.Aqua Mesh Green filter media is designed to be used as the second stage (if using all four), and will trap medium to larger sized particles. Dimensions: 19" x 24" x 1.5"

Read more less

Red Sea NanoMat . Plug & Play Efficient Overview The NanoMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the NanoMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. The NanoMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. It is a drop in replacement for the filter socks in Max Nano G2 systems, Reefer G2 systems and all standard 4" filter socks. Features Plug & Play installation that takes the place of the 4" filter socks in compatible systems. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Processor controlled drive unit (no App or internet connection required) Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Auto shutdown to prevent fleece wastage Specifications Capacity - Systems up to 200 liters (53 gallons) Fleece Mat Width: 5.5cm / 2.16" Fleece Mat Length: 18m / 59 feet Unit Dimensions: 10 x 9 x 41cm / 3.9" x 3.5" x 16.1"

Read more less

Klir Diverting Cap - 4 Inch Overview This optional Klir Flow Diverter to cap the unused holes of your sock tray. You can easily dial it to divert excess flow or to filter less aggressively.

Read more less

Red Sea ReefMat 250 . Smart Plug & Play Efficient Overview The ReefMat is a plug & play, fully automated, smart fleece roller filter that keeps your aquarium water crystal clear for weeks at a time. Designed with the hobbyist in mind, the ReefMat features an easy fleece-mat replacement system that allows you to switch rolls without having to remove the filter from the sump or turn off the pumps. ReefMat includes a fail-proof solid-state level sensor and an unprecedented smart drive unit that controls and monitors the exact length of fleece-mat that is used. ReefMat is Wi-Fi connected to Red Sea's ReefBeat smart aquarium eco-system and will notify you if the fleece-mat gets torn or runs out, gives you a head's up before it needs replacing, and even provide you with a daily usage log. Features Plug & Play installation with multiple sump setup options. Easy fleece-mat replacement system. Efficient, high-flow, skimmer friendly, 50 g/m2, non-woven polyester fleece-mat rolls. Smart drive unit - connected to the ReefBeat ecosystem. Solid-State internal and external water level sensors (no moving parts). Integrated media basket for additional chemical filtration. Kink-resistant, corrugated inlet hose with a USA/Metric PVC connector. Note: Suitable for saltwater aquariums only.Features Peace of Mind - Timely notifications should the fleece-mat get torn, stuck, or run out. In addition to the notifications, the ReefMat smart drive-unit will automatically shut off the motor until the roll is unblocked or replaced.End of Roll Monitor - Based on the average daily usage, ReefBeat lets you know your preferred number of days before the roll is due to end.Performance Log - Continuously monitor performance with a detailed hourly & daily fleece-at dispensing record for the current roll and overall stats for previous rolls.Customized Dispensing - The length of fleece-mat dispensed can be customized allowing for optimal system performance. ReefMat 250 Mounting and Installation The ReefMat comes fully assembled, straight out of the box. For ease of operation, it is designed to hang on the front wall of the sump however it also has optional legs for a freestanding installation. Both the Drive- unit and inlet hose can be positioned on either side of the ReefMat as best suits each specific installation. Kink-resistant, corrugated (32mm/1.25" ID) inlet hose with a PCV universal connector (suitable for both metric and USA piping) are provided to easily connect the ReefMat directly to the aquarium downpipe or dedicated feed pump.See images for compatibility and mounting dimensions Specifications Capacity - Systems up to 250 liters (66 gallons) Maximum Flow: 3500 liters / 925 gallons per hour Fleece Mat Width: 8cm / 3.15" Fleece Mat Length: 32m / 105 feet Unit Dimensions: 16 x 20 x 49cm / 6.3" x 7.9" x 19.3"

Read more less

Klir Y Cable Overview This cable allows you to link two Klir Filter units together to a single sensor and controller. This cable works great if you want to install two units into the same overflow compartment and ensure that both units are synced and work equally.

Read more less

Klir Di-7 Fleece Filter - Version 2 Overview The Klir Filter automatically unrolls new filtering material, removing suspended particles from your aquarium and producing crystal clear water. The Patent Pending Klir Fleece Filter Di-7 fits directly into most 7in filter sock chambers that automatically unrolls new material as it gets clogged, removing suspended particles from your aquarium and producing crystal clear water. Enjoy maintenance-free aquarium filtration for months at a time. Klir filter is a direct replacement filter socks on sumps with sock trays. Simply remove your sock and insert the Klir. As water passes through the Klir filter and the filtering material becomes saturated with waste, the water level will begin to rise. When the water makes contact with the optical sensor, a motor is activated to advance clean filtering material. As clean material is exposed, water is now able to flow freely, lowering the water level in the sock tray and deactivating the motor. Benefits Easy drop-in installation - no plumbing required. No additional sump space is needed. Results in crystal clear water filtered down to 50-microns - double the filtering capacity of most filter-socks. Waste is removed from the water column before it has time to breakdown, helping to maintain low nutrient parameters! The constant chore of monitoring and swapping filter socks or other mechanical media every few days is eliminated for months at a time. Once the filtering media is exhausted, replacing it is a snap and very economical. Features New upgraded Version 2 Klir Smart ControllerTriple Optical Magnet Mount SensorEasy drop-in installation even in tight spotsFully automatic with smart controllerCompact and directly replaces 7-inch filter socksHolds 50 yards of 50-micron fleeceCapable of filtering up to 1800 GPH per unitRemovable lid with carbon insert for noise and odorsExpandable to dual units for higher flow rates-7 Fleece Filter Sump RequirementsSump with sock-tray (or use the Klir Filter Bracket) Capable of holding 1.5 inches of water above the tray8.125 inches of available space below the tray7.125 inch sump lid opening directly above the filter socksWhat's Included Klir 7" Drop-In Automatic Fleece Filter 6.9" Swappable Collar 7.55" Swappable Collar Version 2 Smart Controller & Magnet-mount Sensor 50-Yard Roll of 50-Micron Fleece Activated Carbon Insert DC Geared Motor (DC12V/.06A)

Read more less

Klir Di-4 Filter Bracket Overview An accessory for the Klir Di-4 Fleece Filter that allows you to add it to sumps without sock trays or to DIY sump applications using the Klir Filter Bracket. Features Dual Submerged 1in inputs Compatible with full-siphon overflows Built-in adjustable flow diverter to bypass excess flow or to filter less aggressively Dimensions: 7.4" x 5.25" x 12.625"

Read more less

Klir Di-7 Filter Bracket Overview An accessory for the Klir Di-7 Fleece Filter that allows you to add it to sumps without sock trays or to DIY sump applications using the Klir Filter Bracket. Features Dual Submerged 1.5" inputs Compatible with full-siphon overflows Built-in adjustable flow diverter to bypass excess flow or to filter less aggressively Dimensions: 11" x 8" x 13"

Read more less

Clarisea SK-5000 G3 Automatic Fleece Filter Overview The ClariSea SK-5000 Gen 3 offers higher-volume mechanical filtration for larger systems with the same compact body and Gen-3 upgrades: preassembled frame, quick-release silencer plates, top rollers with guides, drop-in fleece holder, and smart controller with alarms. Ships with a 40 m Quick-Change, phosphate-free fleece roll for long service life and easy swaps. Features Recommended flow up to 5,000 L/h (≈1,300 USG/h) Quiet operation with quick-release splash/silencer plates Smart controller auto-advances fleece; alarms for end-of-roll and float/jam/overflow Built-in fail-safe overflow and water-bypass system Universal inlet elbow for 32 mm / 40 mm / 1" pipe Specifications Footprint: ~9" x 10.1" height: ~18" Optimal water depth: 10 cm (4") Submersion range: 5–20 cm (2–8") Hang-on bracket height adjustment: up to 14 cm (5.5") Recommended aquarium size: ~1200 L (320 USG) at typical turnover Fleece width: 15 cm (6"); roll length: 40 m What’s Included ClariSea Gen 3 SK-5000 filter (preassembled body) 1 × SK-5000 fleece roll Float level sensor & smart controller Assembly/quick-start documentation

Read more less

Clarisea SK-3000 G3 Automatic Fleece Filter Overview The ClariSea SK-3000 Gen 3 is an ultra-compact automatic roller filter that continuously removes suspended particles (detritus, food, microalgae) to keep water crystal clear while reducing maintenance and skimmer load. Gen 3 adds a preassembled body, quick-release silencing plates, top rollers with fleece guides, a drop-in fleece holder, and a smart controller with alarms. Ships with a 40 m Quick-Change, phosphate-free fleece roll. Features Recommended flow up to 3,000 L/h (≈800 USG/h) Small installation footprint; quiet operation via quick-release splash/silencer plates Smart controller automatically advances fleece with end-of-roll and jam/overflow alarms Built-in fail-safe overflow and water-bypass management Includes extra-long 40 m Quick-Change fleece (low odour, phosphate-free) Universal inlet elbow for 32 mm / 40 mm / 1" pipe Specifications Footprint: ~9" x 8.1" height: ~18" Optimal water depth for long fleece life: 10 cm (4") Submersion range: min 5 cm (2"), max 20 cm (8") Hang-on bracket height adjustment: up to 14 cm (5.5") Recommended aquarium size: up to ~600 L (160 USG) at typical turnover Fleece width: 10 cm (4"); roll length: 40 m What’s Included ClariSea Gen 3 SK-3000 filter (preassembled body) 1 × SK-3000 fleece roll Float level sensor & smart controller Assembly/quick-start documentation

Read more less

Klir Diverting Cap - 7 Inch Overview This optional Klir Flow Diverter to cap the unused holes of your sock tray. You can easily dial it to divert excess flow or to filter less aggressively.

Read more less