Neptune Liquid Level Sensor - 4 Inch The Neptune LLS Sensors for your Apex controller allow for the measurement of water depth in inches or centimeters.The Liquid Level Sensor is available in four different sizes- 4", 15" 23" and 35" with each sensor having a special place in helping understand the water level in the sump, aquarium, reservoirs, and other liquid-holding containers.No longer do you need to physically look to see how much water level is above or below a specific point, but now simply open the Apex Fusion App and observe. How the LLS from Neptune works The LLS sensor can connect to any available FMM port in your Apex System. Liquid will enter the plastic envelope around the thin material of the sensor. Once the liquid is in contact with the sensor material the LLS uses a patented resistive sensing technology to accurately and reliably measure the liquid level in a container.Included with each LLS sensor is a clip that allows for the mounting of the sensor to the side of the sump, aquarium or container. You can also mount the LLS sensor to a baffle inside the sump. Once calibrated the LLS is accurate to about two-tenths of an inch. Liquid Level Sensor- 4" Applications The 4" LLS is the smallest of the four sensor offerings. It is the perfect fit for small reservoirs for small sumps, ATO reservoirs and additive containers. The smallest LLS can be a great solution to double check that liquid additions of your additives match your dosing solution over a period of time. For example, if you dosed 250 mL additives over two weeks and you know each inch is 100 mL, then the additive reservoir liquid level would have decreased exactly by 2.5". Application Notes for the LSS The components in the head of the LLS are fully encapsulated in epoxy, but the LLS is not intended to be fully submerged. Care should be taken when selecting the proper length of LLS and installing it to ensure that the water level never exceeds the uppermost graduation mark.
Magnetic Optical Sensor for Neptune Apex The Neptune Magnetic Optical Sensor replaces the optical sensor with magnet and offers an improved look, feel, and magnetic design that also lends itself to help prevent water incursion into the sensor.The MOS plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in your sump, water storage level sensor, and much more. The sensors can be mounted into custom brackets or through a hole in a vessel. Included with the Neptune MOS are a fastening nut and silicone washer.
Neptune Apex Optical Multi-Surface Leak Sensor New to the leak detector offerings for your Neptune Apex is the Optical Multi Surface Leak Sensor (LD-3). This is a weighted sensor that is an improved sensor and design over our Solid-Surface Leak Sensor (LD-2). Neptune LD-3 Optical Leak Sensor Improvements An epoxied design that prevents water incursion into the sensor circuitry. This allows the sensor to be utilized over and over despite how often it becomes activated and wet. Utilizing an optical sensor allows the sensor to be placed on any surface including metal and epoxied cement floors without a false activation. This LD-3 Leak Sensor requires an open FMM module port in order to work with your Apex aquarium controller.
Red Sea ReefATO+ Reefer Upgrade Kit Exceptionally reliable and smart ATO, temperature monitor and leak detector The Red SeaReefATO+ is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. In addition, the ReefATO+ provides two other critical aquarium health indicators: a fully featured on-line digital temperature monitor and a leak detector. How the ATO Works The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity. The ATO+ includes the added safety feature of an l-proof (solid-state EC technology) water level sensor with built-in safety shutoff. Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected. Components of the Red Sea 3-in-1 ReefATO+ ATO Sensor - Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1" above the normal pump-OFF point. The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times. ATO Pump Quiet, variable flow, 12 vdc ATO pump. Cylindrical design with diameter of 4.5cm / 1.8" to fit inside standard jerrycans. Max flow rate 300 lph / 75 gph, Max head 2.5m / 8', power 6-10W. Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry. Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump. The noise damping rubber impeller chamber cover and impeller can be removed for pump maintenance. Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing. Leak Detector - The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater. If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device. Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps. Temperature Sensor - The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of +/-0.1F. The ReefBeat App allows you to set a narrow "desired" temperature range, and a slightly wider "acceptable" range, that will be seen on- line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone.The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days. Smart Controller - The micro-processor monitors and reliably controls all of the components and connects them to the ReefBeat eco-system. ReefATO+ Complete Installation Kit 3M / 10' - 1.5mm / 1/16" thick silicone tubing ID 5mm / 0.2" Silent flow - Tube holder, clips on 4 - 12mm / 1/2" glass Siphon breaker Note: If you have a Red Sea Reefer already, save some money and purchase this upgrade kit. It does not include the magnets and bracket needed to holder the sensor that other non Red Sea systems may require.
Red Sea ReefATO+ Exceptionally reliable and smart ATO, temperature monitor and leak detector The Red SeaReefATO+ is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. In addition, the ReefATO+ provides two other critical aquarium health indicators: a fully featured on-line digital temperature monitor and a leak detector. How the ATO Works The EC technology titanium probes detect the water levels that triggers the pump to be switched on and off to maintain a stable water level and salinity. The ATO+ includes the added safety feature of an l-proof (solid-state EC technology) water level sensor with built-in safety shutoff. Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected. Components of the Red Sea 3-in-1 ReefATO+ ATO Sensor - Fail-proof (solid-state EC technology) water level sensor, with built-in back-up pump-OFF probes located 2.5cm / 1" above the normal pump-OFF point. The full array of the Reef-Spec titanium probes gives an indication at all times of the actual water level relative to the sensor, which can be seen on the ReefBeat App at all times. ATO Pump Quiet, variable flow, 12 vdc ATO pump. Cylindrical design with diameter of 4.5cm / 1.8" to fit inside standard jerrycans. Max flow rate 300 lph / 75 gph, Max head 2.5m / 8', power 6-10W. Pump performance monitor in the controller will shut down the pump automatically and let you know through the ReefBeat App if it is not connected, stalls or RO reservoir runs dry. Pump speed is automatically adjusted according to your installation to maintain a flow rate of approximately 72 lph / 18 gph ensuring a splash proof and quiet flow of water into the sump. The noise damping rubber impeller chamber cover and impeller can be removed for pump maintenance. Includes lock-nut on the outlet hose barb for secure connection to the silicon tubing. Leak Detector - The highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes detects the full range of waters from RODI to seawater. If a leak is detected the ATO Auto-fill is immediately disabled, and after a few seconds to confirm that the leak persists, the controller sounds an optional audible alarm and sends a notification to your mobile device. Connect the Leak Detector to the Emergency Quick-action for the aquarium and ReefBeat eco-system will automatically shut down other ReefBeat devices such as the ReefRun return pumps. Temperature Sensor - The temperature sensor integrated in the ATO+ sensor has been pre-calibrated to give an accuracy of +/-0.1F. The ReefBeat App allows you to set a narrow "desired" temperature range, and a slightly wider "acceptable" range, that will be seen on- line in the ReefBeat App and in the full temperature logs. In the event that the temperature goes outside the acceptable range you will get a notification to your smartphone.The detailed logs will show you the minimum, maximum and average temperatures at 15 minute intervals for the past 28 days. Smart Controller - The micro-processor monitors and reliably controls all of the components and connects them to the ReefBeat eco-system. ReefATO+ Complete Installation Kit Sensor holder and magnetic corner mounting bracket for 12mm (1/2") glass. This is suitable for all non-red sea aquariums and allows you to virtually mount in any system. 3M / 10' - 1.5mm / 1/16" thick silicone tubing ID 5mm / 0.2" Silent flow - Tube holder, clips on 4 - 12mm / 1/2" glass Siphon breaker Note: If you are using the ReefATO+ on a Red Sea Reefer, you can save some money and purchase the upgrade kit. It does not include the magnets and bracket needed to holder the sensor that other non Red Sea systems may require.
Red Sea ReefDose 2 The Red Sea ReefDose is designed and built specifically for the daily supplementing of reef aquariums.ReefDose uses bespoke (patent-pending) single-drop-accuracy dosing heads together with an advanced controller that provides a full suite of features.The "Dynamic Dosing Queue" run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages.With programming through the ReefBeat App, ReefDose offers multiple options for fully automated, easy-set dosing, or a simple schedule of individually planned doses.In addition to the regular flow rate, you can select the "Whisper" mode for almost silent operation, or "Turbo" mode if you want to get the dosing done as quickly as possible.The ReefDose is part of Red Sea's ReefBeat smart ecosystem, seamlessly integrating with all other ReefBeat devices Red Sea ReefDose 2 Features Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of +/- 0.05ml or an average deviation of 0.5% (over 10ml). 4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule for the complete device. Easy assembly click-on/off dosing heads (no tools or alignment required). Automatic delay between the heads to prevent chemical interaction between supplements. Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml. On-demand manual dosing. Secured connectors for flexible tubing: OD 5mm - ID 3mm. 3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min. Motor life expectancy of 10 years - based on 250ml/day/head. Specifications of the Reef Dose 2 by Red Sea Reef Dose 2 Dimensions: 5.1" x 4.1" (13cm x 10.5cm) Reef Dose 4 Dimensions: 8.9" x 4.1" (22.5cm x 10.5cm) Wall mounting bracket included.
Red Sea ReefDose 4 The Red Sea ReefDose is designed and built specifically for the daily supplementing of reef aquariums.ReefDose uses bespoke (patent-pending) single-drop-accuracy dosing heads together with an advanced controller that provides a full suite of features.The "Dynamic Dosing Queue" run by the controller combines the desired dosing plans for each head into one coordinated daily dosing schedule for the complete device. The queue is automatically updated after any settings changes, and reschedules any doses that are missed due to unscheduled events such as power outages.With programming through the ReefBeat App, ReefDose offers multiple options for fully automated, easy-set dosing, or a simple schedule of individually planned doses.In addition to the regular flow rate, you can select the "Whisper" mode for almost silent operation, or "Turbo" mode if you want to get the dosing done as quickly as possible.The ReefDose is part of Red Sea's ReefBeat smart ecosystem, seamlessly integrating with all other ReefBeat devices Red Sea ReefDose 4 Features Single drop accuracy dosing heads with a direct-drive planetary gear-motor, provides an accuracy of +/- 0.05ml or an average deviation of 0.5% (over 10ml). 4 easy-set, smart dosing options for each head, that are automatically combined into one coordinated schedule for the complete device. Easy assembly click-on/off dosing heads (no tools or alignment required). Automatic delay between the heads to prevent chemical interaction between supplements. Daily dose per head of 0.2ml up to 1000ml in increments of 0.1ml. On-demand manual dosing. Secured connectors for flexible tubing: OD 5mm - ID 3mm. 3 dosing flow rates: Whisper 15ml/min, Regular 30ml/min, Turbo 45 ml/min. Motor life expectancy of 10 years - based on 250ml/day/head. Specifications of the Reef Dose 4 by Red Sea Reef Dose 2 Dimensions: 5.1" x 4.1" (13cm x 10.5cm) Reef Dose 4 Dimensions: 8.9" x 4.1" (22.5cm x 10.5cm) Wall mounting bracket included.
Red Sea ReefDose Accessory Kit - Blue/Green An accessory kit for your Red Sea ReefDose. Everything required to connect a dosing pump in one convenient kit. Available in 2 color versions providing 8 unique colors for easily identifying a full range of supplements from container to dosing tip. Each ReefDose Accessory Kit Contains: Air-resistant TPE colored tubes 12m / 40' tubes (4 colors - 3m/10' each) Tube holder with 4 quick connect tips Snap-open tube organizer (3 units)
Red Sea ReefDose Accessory Kit - Red/Yellow An accessory kit for your Red Sea ReefDose. Everything required to connect a dosing pump in one convenient kit. Available in 2 color versions providing 8 unique colors for easily identifying a full range of supplements from container to dosing tip. Each ReefDose Accessory Kit Contains: Air-resistant TPE colored tubes 12m / 40' tubes (4 colors - 3m/10' each) Tube holder with 4 quick connect tips Snap-open tube organizer (3 units)
Red Sea ReefDose Head Tube with Barbs Replacement head tube assembly with barbs for all Red Sea ReefDose aquarium dosers.Manufacturer Part number: R35344
Slide-out Control Panel Ideal for reef aquarium devicesDesigned with hobbyist needs in mind, Red Sea's new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place.The Control Panel is designed to fit either side of your cabinet, and is made of marine-spec laminated plywood with quick-release stainless steel soft-close sliders, allowing for easy mounting and access to all your equipment. Features & Specifications Marine-spec, 2 cm (0.8") thick, black laminated plywood panel. Mounts on both left or right sides. Quick-release stainless steel soft-close sliders. Mounting brackets provide 3 cm (1.2") clearance for hinges. Available in two sizes: 25 cm (9.8") x 45 cm (17.7") 60 cm (23.6") x 50 cm (19.7") Control Panel 25 Minimum Cabinet Internal Depth: 46cm (18.1")Control Panel 60 Minimum Cabinet Internal Depth: 51cm (20")
Slide-out Control Panel Ideal for reef aquarium devicesDesigned with hobbyist needs in mind, Red Sea's new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place.The Control Panel is designed to fit either side of your cabinet, and is made of marine-spec laminated plywood with quick-release stainless steel soft-close sliders, allowing for easy mounting and access to all your equipment. Features & Specifications Marine-spec, 2 cm (0.8") thick, black laminated plywood panel. Mounts on both left or right sides. Quick-release stainless steel soft-close sliders. Mounting brackets provide 3 cm (1.2") clearance for hinges. Available in two sizes: 25 cm (9.8") x 45 cm (17.7") 60 cm (23.6") x 50 cm (19.7") Control Panel 25 Minimum Cabinet Internal Depth: 46cm (18.1")Control Panel 60 Minimum Cabinet Internal Depth: 51cm (20")
Seaside Aquatics Dosing Container - 1.5 Litre Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums. Features of the Seaside Aquatics 1.5L Dosing Container 1.5 liter capacity is ideal for smaller aquariums Solid acrylic construction Standard 1/4" Tubing Connection Dimensions: 12.5" High x 4.5" Diameter Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Seaside Aquatics Dosing Container – 2.5 Litre Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums. Features of the Seaside Aquatics 2.5L Dosing Container 2.5 liter capacity is ideal for smaller aquariums Solid acrylic construction Standard 1/4" Tubing Connection Dimensions: 14.5" High x 5" Diameter Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Seaside Aquatics Dosing Container - 5 Liter Acrylic Aquarium Container for Auto Top-Off or Dosing freshwater or marine aquariums. Features of the Seaside Aquatics 5L Dosing Container 5 liter capacity is ideal for larger aquariums Solid acrylic construction Standard 1/4" Tubing Connection Dimensions: 16" High x 6.25" Diameter Do not use Red Sea NoPox with this dosing container. The chemicals will cause the container to crack.
Tunze Osmolator 3 - 3154 Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle High Jet 5030 dosing pump with integrated dry running and blockage protection, magnet holder, 12V DC power supply unit, tube and tube holder. Suitable for placement in cabinet filter systems or on the edge of the aquarium. The sensor holds on glass panes up to 15 mm (0.59") and the tube holder up to 22 mm (0.87"). Features of the Tuzne Osomolator 3154 Large, Precise Optical Sensor - Detects the water level with an accuracy of 0.5 mm, resists air bubbles, deposits and scratches. The independent thermal safety sensor stops the Turbelle High Jet 5030 pump in the event of overfilling, ensuring 100% overflow protection. Plug & Play - All required components are ready for installation in the package (except reservoir). No software setup required. The fixed parameters are based on many years of experience. Turbelle High Jet 5030 - Long-lasting high-tech dosing pump Turbelle High Jet 5030 with a maximum delivery height of 6.2 m (20.34') and pleasantly quiet operation thanks to a real 3-phase sine wave. High-Tech Cable - With remarkably high abrasion resistance, seawater resistance and extreme resistance to mechanical impact. As a result, it does not harden in water like PVC cables. With an extra high-contrast intermediate cable sheathing to detect damage at an early stage. Produced in Bavaria by MEDI Kabel. Hose & Hose Connectors Included - The set includes a corrosion-resistant, screw-in push-in fitting (1/4 inch BSP to 6 mm diameter). In addition, a PU hose made entirely in Germany - low-emission, hydrolysis-resistant, microbe-resistant, flexible, but does not tend to kink when laid.
Compact All-In-One Construction - With magnet holder and tube holder for an attachment to any aquarium edge or in the aquarium filter up to 15 mm (2/3").
Magnetic mount for the Tunze Osmolator 3155.Converts the old Osmolator rail and screw mount system to a new magnetic version.Osmolator Holder Board 3150.310 is also required for installation!
TUNZE Osmolator 3 Nano Looking for a reliable and efficient way to maintain a consistent water level in your aquarium? The TUNZE Osmolator 3 Nano is the ultimate auto top-off (ATO) solution designed for small to medium-sized aquariums. Perfect for tanks up to 250 liters (66 US gallons), this device ensures a stable and safe water level, making it an essential tool for both freshwater and saltwater aquarium enthusiasts. Why Choose the TUNZE Osmolator 3 Nano? 1. Precision Optical Sensor The Osmolator 3 Nano features a single, high-precision optical sensor capable of detecting water level changes with an accuracy of 0.5 mm. It's designed to resist air bubbles, deposits, and scratches, ensuring reliable performance over time. 2. Wide Compatibility Works with glass panes up to 12 mm (1/2") thick. Compatible with both cabinet filter systems and direct installation on the aquarium edge. Includes a hose holder for aquarium edges up to 22 mm (0.87"). 3. Powerful Dosing Pump Equipped with the Turbelle High Jet 5030 dosing pump, the system can handle water delivery heights of up to 6.2 meters (20.34 feet). Plus, it operates quietly thanks to its real 3-phase sine wave technology. 4. Built-In Safety Features The Osmolator 3 Nano includes two selectable maximum dosing durations, allowing you to adjust water addition based on your aquarium's size. This feature prevents overfilling and ensures your tank remains safe. 5. Complete Installation Kit The package comes with everything you need: 12V power supply Low-voltage dosing pump 3-meter hose Hose holder Magnet holder (for glass up to 12 mm) Protective cover for the sensor Who Can Benefit from the TUNZE Osmolator 3 Nano? This ATO system is ideal for: Hobbyists maintaining aquariums up to 250 liters Aquarists looking for a reliable and easy-to-install water level management solution Owners of both freshwater and saltwater setups Trusted Brand with a 5-Year Warranty TUNZE is a renowned name in the aquarium industry, known for high-quality products. The Osmolator 3 Nano comes with a 5- year warranty, offering peace of mind and showcasing the brand's commitment to durability. If you're searching for an efficient, safe, and user-friendly auto top-off system, the TUNZE Osmolator 3 Nano is the perfect choice. With its precision sensor, reliable dosing pump, and comprehensive safety features, this device ensures your aquarium's water level stays consistent, supporting a healthy aquatic environment. Get the TUNZE Osmolator 3 Nano today and experience hassle-free aquarium maintenance!
Tunze RO Water Controller - 8555 The TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of any reverse osmosis water station.The controller is also suitable for other water tanks or can be connected to an automatic refill system.It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the water valve can be replaced by switched socket outlet 3150.110 for mains operation.If the position of the sensors of the RO water controller is reversed, the switched socket outlet 3150.110 and a pump can be used to empty a water tank, and thus it can also be used for automatic filling or emptying of tanks.By means of a combination of two units, a water changing system can be built.
Tunze Turbelle High Jet Pump - 5000.021 The Turbelle High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator nano 3152 and Osmolator 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small dimensions. They are very quiet and almost wear-free thanks to the new pump bearings and high-performance drive. It is suitable for use in or out of the water and operates on safety extra-low voltage.The Turbelle High Jet pump comes standard with a push-in fitting for the supplied PU hose (3 m x 6 mm / 118" x 0.24"). Dimensions (L x W x H): 78 x 41 x 41 mm (3.1" x 1.6" x 1.6") Tunze High Jet 5000.021 Features Can be used submersed in water or externally Use to replace or upgrade Tunze Osmolator ATO pump High delivery height in a small package Protection against reverse polarity, dry running, and blockage Saltwater-resistant construction High-tech BEMF BLDC motor Hose and hose connector included Standard ½" and 1/4" connectors Compatible with existing and older Osmolator devices Made in Germany 5-year manufacturer warranty Tunze High Jet Pump Performance* 1.0 m - 120 l/h (39.4" - 31.7 US gal.) 1.5 m - 100 l/h (59.1" - 26.4 US gal.) 2.0 m - 83 l/h (78.8" - 21.9 US gal.) Hmax: 6.2 m (20.3 ft) *Performance specifications based on 6mm diameter tube*Controller required for operation
Tunze Universal Osmolator Replacement Pump 5000.020 Replacement dosing pump for the Tunze 3155 Osmolator.Can also serve as a dosing pump for do it yourself applications.
XP Aqua Replacement ATO Pump Head: 8.2 ft (250 cm) Flow Rate: 74 gph (280 lph) Power: 4.8 W @ 12 VDC Lifetime: 20,000 hrs Cable Length: 6 ft (180 cm) DC Pump Connector: DC 5.5 x 2.5 mm Male
XP Aqua Replacement Duetto 2 Controller Genuine replacement part for the XPAqua Duetto and Duetto 2 ATOs Duetto & Duetto 2 Replacement Controller Specifications Power Input : 100-240 VAC, 50-60Hz DC Output : 12 VDC / 1.0 A Max. Mounting Thickness : 1/2" (12.7 mm) Sensor Size (L x W x T) : 0.78" x 0.78" x 0.98" (20 mm x 20 mm x 25 mm) Dry Side Magnet Size (L x W x T) : 0.78" x 0.78" x 0.31" (20 mm x 20 mm x 8 mm) Length of Cable between Sensor and Controller : 6 ft (180 cm)
XP Aqua Duetto2 ATO System With huge features jammed in a tiny package, the Duetto is the perfect ATO for your aquarium. XPAqua's proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level constant, the two sensors also work in concert with the intelligent QST programming to help prevent overfilling.All the installation parts are included and a magnetic coupling allows you to easily mount or adjust the dual-sensor. Installation takes just seconds so you can spend less time working on your aquarium and spend more time enjoying your aquarium. XP Aqua Duetto2 Features New - Controller programming & circuitry for added system protection New - Improved sensor design for longer durability World's smallest dual-sensor ATO Two layers overfill protection Intelligent QST programming Secondary optical sensor Super precise water level control Super easy installation; plug-and-play No programming or adjustments required Works in complete darkness Specifications of the Duetto2 ATO Power Input: 100~240VAC 50-60HZ DC Pump: Head: 8.2ft (250cm) Flow Rate: 74 gph (280lph) Max mounting thickness: 1/2" (12.7mm)
XP Aqua Replacement Flexi Reversible DC Pump Head: 6.5 ft (200 cm) Flow Rate: 74 gph (280 lph) Power: 4.8 W @ 12 VDC Lifetime: 20,000 hrs Cable Length: 6 ft (180 cm) DC Pump Connector: DC 5.5 x 2.5 mm Male
XP Aqua Sumpless ATO2 The XPAqua Sumpless ATO2 is the first and only ATOdesigned specifically for aquariums without sumps. The combination of the sleek overflow box and the innovative dual-optical sensor ATO will help to keep your aquarium topped off and your water crystal clear.The overflow box easily mounts to any aquarium with its magnetic mount. It acts as a surface skimmer to rid your aquarium of undesirable oily surface skim and doubles as a media reactor for carbon, GFO or any media of your choice.XPAqua's proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level constant, the two sensors also work in concert with the intelligent QST programming to help prevent overfilling.With so many features never seen before in ATO's, the XPAqua Sumpless ATO2 is the ultimate ATO solution for aquariums without sumps. XP Aqua Sumpless ATO 2 Features NEW! - Controller programming & circuitry for added system protection NEW! - Improved sensor design for longer durability Engineered Specifically for Aquariums without Sumps Dual-Optical Sensor for Precise Operation with Secondary Failsafe Intelligent Pre-Programmed Algorithm Doubles as an Effective Surface Skimmer Convenient Media Chamber for Filtration Media Plug-and-Play with All Parts Included Works in Complete Darkness Specifications of the Sumpless ATO 2 from XP Aqua Power Input: 100-240VAC 50-60HZ Flexi Reversible DC Pump: Head: 6.5ft (200 cm) Flow rate: 74 gph (280 lph) ATO DC Pump: Head: 8.2ft (250 cm) Flow rate: 74 gph (280 lph) Flexi Overflow Box: 3.94" x2.17" x6.30" (100mm x55mm x160mm) Max Volume of Media Chamber: 3.74" x1.99" x1.97" (95mm x50.5mm x50mm) 1-der Stick Ultra Media : 3.54" x1.5" x1.89" (90mm x38mm x48mm) Max Mounting Thickness : ½" (12.7mm)
