Carbon

Boyd Chemi-Pure Elite 11.7oz Chemi-pure Elite contains GFO (Granular Ferric Oxide) in order to remove phosphates and silicates from the aquarium water body. GFO has been proven as one of the top choices for removing and controlling any phosphate and/or silicate levels within your aquarium.Get all the original benefits of Chemi-pure with our proprietary GFO blend to give you the ability to remove phosphate and silicates from your aquarium�s water. Now featuring our newest improvement to the original Chemi-pure formula, QuickWash Carbon. NO need for bulk Iron Oxide removers or spending additional money on a phosphate reactor.Chemi-pure Elite makes your aquarium maintenance easier by being pre-packaged in a nylon filter bag, just gently rinse clear before adding to your aquarium to start enjoying a more maintenance free aquarium as it helps control nuisance algae and keeps your aquarium water crystal clear! Benefits of Using Chemi-Pure Elite Carbon Ravenous Appetite Increased Life Span Eliminates fish loss due to unbalanced or polluted water, acidity, and pH changes Necessary organisms allowed growth with no danger of pollution No osmotic shock Helps remove red slime (Cyano Bacteria) Always sparkling crystal clear blue-white water Removes copper metal, ions, odors, all pollution, gasses, CO2, and color No cleaning necessary for health of fish Removes Phosphates Directions for using Chemi-Pure Elite by Boyd Enterprises Keep Chemi-pure Elite sealed wet in container until ready for use. Rinse bag under running water for 5 to 10 seconds, place bags into a high flow area of your sump, canister filter, or HOB filter. Chemi-pure Elite should be replaced approximately every 2-4 months depending on bio-load. If more than one Chemi-pure Elite filter bag is used, change one at a time every week until all bags have been replaced.

Read more less

Boyd Chemi-Pure Blue 11oz Chemi-Pure Blue is specially created for fantastic results in reef and marine aquariums. Our new proprietary blend of premium, low-dust pelleted carbon and high capacity ion-exchange resins are skillfully combined to create a superior all-in- one filter media in a nylon bag.Chemi-Pure Blue significantly reduces organic compounds and phosphates while raising redox and helping stabilize pH for a healthy, crystal clear aquarium. Chemi-Pure Blue Benefits Keeps pH stable and constant Reduces fish loss due to pH changes or polluted water Keeps aquariums crystal clear Provides positive neurological reactions in fish, mimicking a natural environment Removes dissolved organics Helps fish have a better appetite Eliminates osmotic shock Increases fish life span Filters out coppers, metals, odors and phenol Prevents ion antagonism Directions for Using Chemi Pure Blue Keep Chemi-Pure Blue sealed in container until ready for use. Remove the bag from container and rinse gently under clean running water until clear, then place nylon bag in any outside power filter, canister filter, or external sump. For best results water should flow through the filter bag and media.Chemi-Pure Blue should be changed every 4 months depending on bio-load. If more than one Chemi-Pure Blue filter bag is used, change one at a time every week until all bags have been replaced. Each 11oz container of Chemi-Pure Blue treats up to 75 gallons.

Read more less

Boyd Chemi-Pure Blue 5.5oz Chemi-Pure Blue is specially created for fantastic results in reef and marine aquariums. Our new proprietary blend of premium, low-dust pelleted carbon and high capacity ion-exchange resins are skillfully combined to create a superior all-in- one filter media in a nylon bag.Chemi-Pure Blue significantly reduces organic compounds and phosphates while raising redox and helping stabilize pH for a healthy, crystal clear aquarium. Chemi-Pure Blue Benefits Keeps pH stable and constant Reduces fish loss due to pH changes or polluted water Keeps aquariums crystal clear Provides positive neurological reactions in fish, mimicking a natural environment Removes dissolved organics Helps fish have a better appetite Eliminates osmotic shock Increases fish life span Filters out coppers, metals, odors and phenol Prevents ion antagonism Directions for Using Chemi Pure Blue Keep Chemi-Pure Blue sealed in container until ready for use. Remove the bag from container and rinse gently under clean running water until clear, then place nylon bag in any outside power filter, canister filter, or external sump. For best results water should flow through the filter bag and media.Chemi-Pure Blue should be changed every 4 months depending on bio-load. If more than one Chemi-Pure Blue filter bag is used, change one at a time every week until all bags have been replaced. Each 5.5oz container of Chemi-Pure Blue treats up to 35 gallons.

Read more less

The grade of carbon you need, at a budget friendly price! The unique activation process ensures maximum DOC removal capability, with a minimal impact on trace element levels. No measurable phosphate or heavy metal levels. Pelletized form prevents packing and enables a higher efficiency per unit weight. Instructions Always rinse with RO / filtered water before use, in order to remove dust from shipping. We recommend 1/2 cup (125ml) of carbon for every 100 gallons of actual water volume. Place the carbon in a nylon filter media bag, and in to an area of consistent water flow (sump baffle / canister filter etc.) or employ full time in a reactor. Change every 4-6 weeks. Some prefer carbon periodically; 24-72 hours every 4-6 weeks. Try it! Unlike some competitors, Reef Crest bulk chemicals are sold by net weight not volume - this ensures a consistent amount of product in any package.Some settling may occur in shipping.

Read more less

Boyd Chemi-Pure 10oz Chemi-pure remains a revolutionary product for over 60 years, and practically all aquarium filter media have been modeled after it! Large aquariums or small, Chemi-pure produces consistent results that make it easier to maintain a beautiful and healthy aquarium.Chemi-pure can be used with all water types as a chemical absorption filter, ion generator, and exchange unit to positively keep pH at a perfect and constant level. Chemi-pure is also fantastic for use with African cichlids and Discus! Chemi-pure does not remove trace elements and is the only filter medium which aids in the natural balance of positive and negative charges, with an emphasis on the beneficial negative ion.Now featuring QuickWash Carbon, our newest improvement to the original Chemi-pure formula. This carbon is pelletized and pre-washed providing the best combination of surface area, pore size and dust content, making it the ideal filtration solution for fresh and saltwater aquariums. Benefits of Using Chemi Pure Carbon Promotes ravenous appetite and increased life span in fish. Eliminates fish loss due to unbalanced or polluted water, acidity, and pH changes Necessary organisms allow growth with no danger of pollution Removes copper, metal, ions, odors, all pollution, gasses, CO2, color Phenol. Directions for using Chemi- Pure by Boyd Enterprises Keep Chemi-pure sealed wet in container until ready for use. Rinse bag under running water for 5 to 10 seconds, place bags into a high flow area of your sump, canister filter, or HOB filter. Chemi-pure should be replaced approximately every 2-4 months depending on bio-load. If more than one Chemi-pure filter bag is used, change one at a time every week until all bags have been replaced.

Read more less

Boyd Chemi-Pure Blue Nano - 5 Pack Chemi-Pure Blue is specially created for fantastic results in reef and marine aquariums. Our new proprietary blend of premium, low-dust pelleted carbon and high capacity ion-exchange resins are skillfully combined to create a superior all-in- one filter media in a nylon bag.Chemi-Pure Blue significantly reduces organic compounds and phosphates while raising redox and helping stabilize pH for a healthy, crystal clear aquarium. Chemi-Pure Blue Benefits Keeps pH stable and constant Reduces fish loss due to pH changes or polluted water Keeps aquariums crystal clear Provides positive neurological reactions in fish, mimicking a natural environment Removes dissolved organics Helps fish have a better appetite Eliminates osmotic shock Increases fish life span Filters out coppers, metals, odors and phenol Prevents ion antagonism Directions for Using Chemi Pure Blue Keep Chemi- Pure Blue sealed in container until ready for use. Remove the bag from container and rinse gently under clean running water until clear, then place nylon bag in any outside power filter, canister filter, or external sump. For best results water should flow through the filter bag and media.Chemi-Pure Blue should be changed every 4 months depending on bio-load. If more than one Chemi-Pure Blue filter bag is used, change one at a time every week until all bags have been replaced.Chemi-Pure Blue Nano is packaged in conveniently sized 2" x 2" nylon packets (5 per bag), offering the ultimate in customizable filtration! One pack treats 5 gallons, so one 5-pack can treat up to 25 gallons.

Read more less

The grade of carbon you need, at a budget friendly price! The unique activation process ensures maximum DOC removal capability, with a minimal impact on trace element levels. No measurable phosphate or heavy metal levels. Pelletized form prevents packing and enables a higher efficiency per unit weight. Instructions Always rinse with RO / filtered water before use, in order to remove dust from shipping. We recommend 1/2 cup (125ml) of carbon for every 100 gallons of actual water volume. Place the carbon in a nylon filter media bag, and in to an area of consistent water flow (sump baffle / canister filter etc.) or employ full time in a reactor. Change every 4-6 weeks. Some prefer carbon periodically; 24-72 hours every 4-6 weeks. Try it! Unlike some competitors, Reef Crest bulk chemicals are sold by net weight not volume - this ensures a consistent amount of product in any package.Some settling may occur in shipping.

Read more less

PolypLab Pro-Carbon is a high performance activated carbon for crystal clear water in fresh-water and salt-water aquariums. PolypLab Pro-Carbon is an ultra high performance activated carbon manufactured under the most strict quality controls.PolypLab Pro-Carbon dramatically improves water quality in your aquarium by rapidly absorbing harmful toxins, impurities, organic wastes, medications, and more. Problems with hair algae or slow coral growth can be caused by the release of phosphates by impure activated carbons with high PO4 levels - sometimes as high as 14.0! Phosphate is known to promote the growth of nuisance algae as well as interfere with the proper growth of stony corals.PolypLab Pro-Carbon has one of the lowest PO4 levels in the industry of only 1.3!Features Highly Active pH Balanced In pellet form to reduce dust and find grains Lowest Phosphate Concentration in Industry DirectionsBefore use rinse PolypLab Pro-Carbon with fresh clean water to remove carbon dust. PolypLab Pro-Carbon should be placed between layers of fine filter media and placed in an area of your sump with strong movement. Pro-Carbon is also perfect for use in media reactors.

Read more less

Reef Crest Rox 0.8 Activated Carbon is the highest grade acid washed extruded carbon available on the market today.600 Grams of Rox Carbon measures approximately 1/2 Gallons Features: Steam activated produced to the highest quality Food-Grade required by the FDA. Unmatched adsorption properties. High mechanical strength and low dust content. ROX Carbon offers superior pore size and structure, which makes it capable of adsorbing a wide range of molecule and particle sizes. These superior adsorption qualities facilitate the capture and retention of: medication, organics, chemicals, color contaminants, odors, and water column impurities. Electrostatic attraction and chemical bonding is utilized to accumulate and trap contaminants to pore walls and/or outer pellet surfaces. Small pellet size and high porosity provides more surface area increasing adsorption rates to that required by the medical industry. PH neutral 10. For use in Saltwater, Freshwater, and Ponds. Product Specifications: Iodine Number: 1000min. Ball-Pan Hardness: 97min. Particle Size Iron (ACID EXTR.), MASS-%: 0.02max. Moisture (AS PACKED), MASS-%: 5max. PH: Neutral Food Chemicals Codex: Pass Typical Properties Methylene Blue Adsorption, g/100g:  24 Surface Area (BET), m2/g:    1225 Apparent Density, Vibration Feed:  0.40 g/ml Density, Backwashed and Drained:  0.35 g/ml Ash Mass %:        ~3 Calcium (ACID EXTR.), MASS-%    0.01 Chloride (ACID EXTR.), MASS-%    0.1 Directions: Use a maximum of 150ml of media per 400 liters (100 gallons) of net system water volume. Rinse in water before each use. Although this product has a much higher adsorption capacity of most other carbons, it is recommended that it should be replaced regularly to maintain the same water parameters at all times. Carbon media can be used in fluidized filters, filter-bags, or any other media filters. However, proper flow is paramount to ensure efficient operation of the method utilized. When placed in a filter bag and/or other passive flow through application, daily kneading is recommended to avoid channeling of the media inside the bag. Rox 0.8 is extremely powerful in exhausting chemicals, organics, and/or waste from your system. Introduction to any system must be gradual to avoid rapid changes of chemistry which can result in stress to the inhabitants. If higher dosages are desired, increase in small increments over a period of time. Optimal water parameters should always be monitored for best results. Volume = 1/2 Gallon - 600grams

Read more less

Reef Crest Rox 0.8 Activated Carbon is the highest grade acid washed extruded carbon available on the market today.1200 Grams of Rox Carbon measures approximately 1 Gallon Features: Steam activated produced to the highest quality Food-Grade required by the FDA. Unmatched adsorption properties. High mechanical strength and low dust content. ROX Carbon offers superior pore size and structure, which makes it capable of adsorbing a wide range of molecule and particle sizes. These superior adsorption qualities facilitate the capture and retention of: medication, organics, chemicals, color contaminants, odors, and water column impurities. Electrostatic attraction and chemical bonding is utilized to accumulate and trap contaminants to pore walls and/or outer pellet surfaces. Small pellet size and high porosity provides more surface area increasing adsorption rates to that required by the medical industry. PH neutral 10. For use in Saltwater, Freshwater, and Ponds. Product Specifications: Iodine Number: 1000min. Ball-Pan Hardness: 97min. Particle Size Iron (ACID EXTR.), MASS-%: 0.02max. Moisture (AS PACKED), MASS-%: 5max. PH: Neutral Food Chemicals Codex: Pass Typical Properties Methylene Blue Adsorption, g/100g:  24 Surface Area (BET), m2/g:    1225 Apparent Density, Vibration Feed:  0.40 g/ml Density, Backwashed and Drained:  0.35 g/ml Ash Mass %:        ~3 Calcium (ACID EXTR.), MASS-%    0.01 Chloride (ACID EXTR.), MASS-%    0.1 Directions: Use a maximum of 150ml of media per 400 liters (100 gallons) of net system water volume. Rinse in water before each use. Although this product has a much higher adsorption capacity of most other carbons, it is recommended that it should be replaced regularly to maintain the same water parameters at all times. Carbon media can be used in fluidized filters, filter-bags, or any other media filters. However, proper flow is paramount to ensure efficient operation of the method utilized. When placed in a filter bag and/or other passive flow through application, daily kneading is recommended to avoid channeling of the media inside the bag. Rox 0.8 is extremely powerful in exhausting chemicals, organics, and/or waste from your system. Introduction to any system must be gradual to avoid rapid changes of chemistry which can result in stress to the inhabitants. If higher dosages are desired, increase in small increments over a period of time. Optimal water parameters should always be monitored for best results.Volume = 1 Gallon - 1200grams

Read more less

PolypLab Pro-Carbon is a high performance activated carbon for crystal clear water in fresh-water and salt-water aquariums. PolypLab Pro-Carbon is an ultra high performance activated carbon manufactured under the most strict quality controls.PolypLab Pro-Carbon dramatically improves water quality in your aquarium by rapidly absorbing harmful toxins, impurities, organic wastes, medications, and more. Problems with hair algae or slow coral growth can be caused by the release of phosphates by impure activated carbons with high PO4 levels - sometimes as high as 14.0! Phosphate is known to promote the growth of nuisance algae as well as interfere with the proper growth of stony corals.PolypLab Pro-Carbon has one of the lowest PO4 levels in the industry of only 1.3!Features Highly Active pH Balanced In pellet form to reduce dust and find grains Lowest Phosphate Concentration in Industry DirectionsBefore use rinse PolypLab Pro-Carbon with fresh clean water to remove carbon dust. PolypLab Pro-Carbon should be placed between layers of fine filter media and placed in an area of your sump with strong movement. Pro-Carbon is also perfect for use in media reactors.

Read more less

MatrixCarbon is a truly unique activated carbon, bead shaped for optimal hydrodynamics. This provides maximum water flow and contact with a high density of adsorptive sites without the compacting common to granular activated carbon.MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0.While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon has the lowest leachable phosphate content of all major carbon brands tested.It out-performs other best grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. 250 mL will easily treat 100 gallons for several months.It is very clean and nearly dust free.Marine or freshwater use.

Read more less

Boyd Chemi-Pure Elite 47oz Chemi-pure Elite contains GFO (Granular Ferric Oxide) in order to remove phosphates and silicates from the aquarium water body. GFO has been proven as one of the top choices for removing and controlling any phosphate and/or silicate levels within your aquarium.Get all the original benefits of Chemi-pure with our proprietary GFO blend to give you the ability to remove phosphate and silicates from your aquarium�s water. Now featuring our newest improvement to the original Chemi-pure formula, QuickWash Carbon. NO need for bulk Iron Oxide removers or spending additional money on a phosphate reactor.Chemi-pure Elite makes your aquarium maintenance easier by being pre-packaged in a nylon filter bag, just gently rinse clear before adding to your aquarium to start enjoying a more maintenance free aquarium as it helps control nuisance algae and keeps your aquarium water crystal clear! Benefits of Using Chemi-Pure Elite Carbon Ravenous Appetite Increased Life Span Eliminates fish loss due to unbalanced or polluted water, acidity, and pH changes Necessary organisms allowed growth with no danger of pollution No osmotic shock Helps remove red slime (Cyano Bacteria) Always sparkling crystal clear blue-white water Removes copper metal, ions, odors, all pollution, gasses, CO2, and color No cleaning necessary for health of fish Removes Phosphates Directions for using Chemi-Pure Elite by Boyd Enterprises Keep Chemi-pure Elite sealed wet in container until ready for use. Rinse bag under running water for 5 to 10 seconds, place bags into a high flow area of your sump, canister filter, or HOB filter. Chemi-pure Elite should be replaced approximately every 2-4 months depending on bio-load. If more than one Chemi-pure Elite filter bag is used, change one at a time every week until all bags have been replaced.

Read more less

Boyd Chemi-Pure 5.5oz Chemi-pure remains a revolutionary product for over 60 years, and practically all aquarium filter media have been modeled after it! Large aquariums or small, Chemi-pure produces consistent results that make it easier to maintain a beautiful and healthy aquarium.Chemi-pure can be used with all water types as a chemical absorption filter, ion generator, and exchange unit to positively keep pH at a perfect and constant level. Chemi-pure is also fantastic for use with African cichlids and Discus! Chemi-pure does not remove trace elements and is the only filter medium which aids in the natural balance of positive and negative charges, with an emphasis on the beneficial negative ion.Now featuring QuickWash Carbon, our newest improvement to the original Chemi-pure formula. This carbon is pelletized and pre-washed providing the best combination of surface area, pore size and dust content, making it the ideal filtration solution for fresh and saltwater aquariums. Benefits of Using Chemi Pure Carbon Promotes ravenous appetite and increased life span in fish. Eliminates fish loss due to unbalanced or polluted water, acidity, and pH changes Necessary organisms allow growth with no danger of pollution Removes copper, metal, ions, odors, all pollution, gasses, CO2, color Phenol. Directions for using Chemi- Pure by Boyd Enterprises Keep Chemi-pure sealed wet in container until ready for use. Rinse bag under running water for 5 to 10 seconds, place bags into a high flow area of your sump, canister filter, or HOB filter. Chemi-pure should be replaced approximately every 2-4 months depending on bio-load. If more than one Chemi-pure filter bag is used, change one at a time every week until all bags have been replaced.

Read more less

The grade of carbon you need, at a budget friendly price! The unique activation process ensures maximum DOC removal capability, with a minimal impact on trace element levels. No measurable phosphate or heavy metal levels. Pelletized form prevents packing and enables a higher efficiency per unit weight. Instructions Always rinse with RO / filtered water before use, in order to remove dust from shipping. We recommend 1/2 cup (125ml) of carbon for every 100 gallons of actual water volume. Place the carbon in a nylon filter media bag, and in to an area of consistent water flow (sump baffle / canister filter etc.) or employ full time in a reactor. Change every 4-6 weeks. Some prefer carbon periodically; 24-72 hours every 4-6 weeks. Try it! Unlike some competitors, Reef Crest Bulk Chemicals are sold by net weight not volume - this ensures a consistent amount of product in any package.Some settling may occur in shipping.

Read more less

PolypLab Pro-Carbon is a high performance activated carbon for crystal clear water in fresh-water and salt-water aquariums. PolypLab Pro-Carbon is an ultra high performance activated carbon manufactured under the most strict quality controls.PolypLab Pro-Carbon dramatically improves water quality in your aquarium by rapidly absorbing harmful toxins, impurities, organic wastes, medications, and more. Problems with hair algae or slow coral growth can be caused by the release of phosphates by impure activated carbons with high PO4 levels - sometimes as high as 14.0! Phosphate is known to promote the growth of nuisance algae as well as interfere with the proper growth of stony corals.PolypLab Pro-Carbon has one of the lowest PO4 levels in the industry of only 1.3!Features Highly Active pH Balanced In pellet form to reduce dust and find grains Lowest Phosphate Concentration in Industry DirectionsBefore use rinse PolypLab Pro-Carbon with fresh clean water to remove carbon dust. PolypLab Pro-Carbon should be placed between layers of fine filter media and placed in an area of your sump with strong movement. Pro-Carbon is also perfect for use in media reactors.

Read more less

MatrixCarbon is a truly unique activated carbon, bead shaped for optimal hydrodynamics. This provides maximum water flow and contact with a high density of adsorptive sites without the compacting common to granular activated carbon.MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0.While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon has the lowest leachable phosphate content of all major carbon brands tested.It out-performs other best grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. 250 mL will easily treat 100 gallons for several months.It is very clean and nearly dust free.Marine or freshwater use.

Read more less

The grade of carbon you need, at a budget friendly price! The unique activation process ensures maximum DOC removal capability, with a minimal impact on trace element levels. No measurable phosphate or heavy metal levels. Pelletized form prevents packing and enables a higher efficiency per unit weight. Instructions Always rinse with RO / filtered water before use, in order to remove dust from shipping. We recommend 1/2 cup (125ml) of carbon for every 100 gallons of actual water volume. Place the carbon in a nylon filter media bag, and in to an area of consistent water flow (sump baffle / canister filter etc.) or employ full time in a reactor. Change every 4-6 weeks. Some prefer carbon periodically; 24-72 hours every 4-6 weeks. Try it! Unlike some competitors, Reef Crest Bulk Chemicals are sold by net weight not volume - this ensures a consistent amount of product in any package.Some settling may occur in shipping.

Read more less