Brightwell Aquatics

Brightwell Aquatics ForinBacter One Brightwell Aquatics FlorinBacter One is a complete tank starter bioculture for all freshwater shrimp, fish & planted aquaria.FlorinBacter One is primarily designed to jump start the ammonia cycle in freshwater planted and shrimp aquariums and prevent "New Tank Syndrome." It will instantly create a biological filter in freshwater aquaria of all types and is particularly useful for freshwater shrimp and planted aquariums. It removes toxic ammonia and nitrite naturally through bacterial oxidation.Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of microalgae and cyanobacteria; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants. Overview of Brightwell ForinBacter One Copper free and shrimp safe. Suspension of non-pathogenic aerobic and anaerobic microbes, as well as natural enzymes, specifically formulated to establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification and denitrification. Specifically formulated for use in shrimp, planted and all freshwater aquaria. Particularly useful in freshwater aquaria with high population densities of shrimp or fish species. Benefits are: Rapid reduction of ammonia, and nitrite. Prevents "New Tank Syndrome." Supplied in a state of suspended animation for maximum longevity. Formulated utilizing extensive data compiled by microbiologists. Instructions & Guidelines for using ForinBacter One from Brightwell Aquatics Important: First, completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not treated will cause it to fail! Shake product well before using. Mix appropriate volume of ShrimpFlorinBacterONE (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense ShrimpFlorinBacterONE below water level of container or aquarium, be sure to thoroughly clean pipette with fresh (preferably purified) water prior to placing tube back into ShrimpBacterONE bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s), which can negatively impact the microbes present in ShrimpFlorinBacterONE. For best results, use within 1-year of purchase date.To seed Biological Filtration in new aquaria: Preferably add 2 ml (1 pump if equipped with a pump, or 2 threads on cap) of ShrimpFlorinBacterONE per US-gallon of aquarium water. Minimum recommended dosage for new aquariums is 1 ml per US-gallon. Turn UV-sterilization and/or ozonation off for a period of one day following addition to aquaria. To provide ongoing biological stability to the aquarium: Add 2 ml of ShrimpFlorinBacterONE per 10 US-gallons of aquarium water per week after initial setup, or switch to ShrimpFlorinBacter7. This will provide increased water clarity and contribute to the ongoing health and overall vigor of inhabitants. Always add this product during and after treatment of the aquarium with any antibiotic or other medication.Storage: Although product can withstand room temperature for periods of time, for best longevity and highest potency, keep refrigerated at 50 degrees F. Do not freeze!

Read more less

Brightwell Aquatics FlorinBacter7 Brightwell Aquatics FlorinBacter7 is a complete bioculture for all freshwater shrimp and freshwater fish & planted aquariaThe concentration of dissolved and particulate organic materials in any aquatic environment can have a significant impact on the overall appearance of, as well as the health of organisms residing within, that system. Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of microalgae and cyanobacteria; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants.Brightwell Aquatics ShrimpFlorinBacter7 is a selective complex of extremely effective microbes and enzymes that rapidly reduces the concentrations of organic nitrogen, ammonia, nitrite, nitrate, phosphate, and organic carbon in freshwater ecosystems, leading to greatly improved water quality; better water quality typically leads to healthier aquarium inhabitants. Use of ShrimpFlorinBacter7 does not alleviate the requirement for regular partial water changes to help maintain proper concentrations of elements that are vital to long-term health and survival of aquarium inhabitants. No product, regardless of manufacturer's fatuous marketing claims, can do this. An aquarium is a living ecosystem and requires proper care by the aquarist; regular partial water changes constitute a large part of this care. Overview of Brightwell FlorinBacter7 Copper free and shrimp safe. Suspension of non-pathogenic aerobic and anaerobic microbes, as well as natural enzymes, specifically formulated to establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification, denitrification, and organic waste degradation through complete nutrient remineralization. Specifically formulated for use in shrimp, planted and all freshwater aquaria. Particularly useful in freshwater aquaria with high population densities of shrimp or fish species. Benefits are: Reduction of organic compounds into nutrients that encourage the growth of desirable plants. Increased water clarity. Decreased aquarium odor. Rapid reduction of organic carbon, ammonia, nitrite, nitrate, and phosphate. Digestion of uneaten/undigested food, excreta, detritus, and other latent organic material, resulting in cleaner and healthier aquarium substrate (without having to physically clean or disturb the substrate bed). Greatly-reduced hydrogen sulfide production. Increase in dissolved oxygen concentration. Limits availability of pre-existing phosphate to undesirable forms of algae and cyanobacteria. Supplied in a state of suspended animation for maximum longevity. Formulated utilizing extensive data compiled by microbiologists. Instructions & Guidelines for using FlorinBacter7 from Brightwell Aquatics Shake product well before using. Mix appropriate volume of ShrimpFlorinBacter7 (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense ShrimpFlorinBacter7 below water level of container or aquarium, be sure to thoroughly clean pipette with fresh (preferably purified) water prior to placing tube back into ShrimpFlorinBacter7 bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s), which can negatively impact the microbes present in ShrimpFlorinBacter7. For best results, use within 1-year of purchase date. Grossly overdosing ShrimpFlorinBacter7 will not significantly increase the effectiveness of the product, nor the rate at which it enacts changes in aquaria. The following recommendations are based upon extensive testing and will produce the best results in most aquaria.Medium- to High-nutrient Systems, or to seed Biological Filtration in new aquaria: To effectively decrease the concentration of available nutrients and waste material in all freshwater aquaria, add 6 ml (3 pumps if equipped with a pump) of product per 10 US-gallons of aquarium water daily for the first two weeks of use; the impact that ShrimpFlorinBacter7 has on an aquarium is most evident within this period. Turn UV-sterilization and/or ozonation off for a period of 4 hours following addition to aquaria. A noticeable difference in water clarity is typically apparent within 30-minutes of dosing. Follow same instructions for new aquarium start- up. Thereafter, switch to "low-nutrient" dosage (below).Stable, Low-nutrient Systems: To maintain a low concentration of available nutrients in freshwater aquaria, dose add 2 ml (1 pump if equipped with a pump, or 2 threads on cap) of product per 8 US-gallons of aquarium water once to twice each week. It is best to leave UV-sterilization and/or ozonation off for a period of 4 hours following addition to aquaria.Dosage may be adjusted according to perceived benefit to aquarium. During changes in biological filtration or when increasing the aquarium bioload, dose at the "medium to high-nutrient systems rate" above, daily for one week, then resume "low-nutrient" dosage.Storage: Although product does not require refrigeration, and it can withstand storage at room temperature, for best longevity and highest potency, keep refrigerated at 50 degrees F. Do not freeze!

Read more less

Brightwell Aquatics Reef Code B-P Brightwell Aquatics Reef Code B is a balanced calcium and alkalinity system for all marine fish and reef aquaria. Overview of Brightwell Reef Code B-P Powder The alkalinity-bearing component of a two-part method for dosing calcium and carbonates (the substances largely responsible for increasing alkalinity ("buffering capacity")) in the same ratio as that found in natural seawater. Benefits reef-building organisms such as corals, clams, calcareous algae, etc. Simplifies calcium and alkalinity maintenance; economical for particularly large systems. Contains no phosphate, silicate, or organic material. Formulated by a marine scientist. This method of calcium and carbonate supplementation is advantageous to hobbyists interested in a simple and effective means of providing elements and molecules required for skeletal growth of reef-building organisms such as corals, clams, and their allies. The magnesium concentration in all reef aquaria should be adjusted to, and maintained between, 1,290 - 1,320 ppm before using these supplements (alone or together) or other calcium and alkalinity products. Doing so helps prevent unwanted precipitation between calcium and carbonate ions. The rate at which calcium and carbonates are extracted from the water is determined by the stocking density of reef-building livestock, type of lighting, and other conditions; therefore, each aquarium will have different requirements for the rate of supplementation.It is recommended that calcium and magnesium concentrations in the aquarium system be determined by using accurate test kits prior to supplementing. Do not add this product directly to an aquarium containing live animals without first diluting in water as directed. Instructions & Guidelines for using Reef Code B-P from Brightwell Aquatics 1 Kilogram will make between approximately 1.8 and 3.1 gallons of Part-B additive.Basic Instructions and Guidelines: Dissolve 20 grams per 8-fl. oz. of purified water in a clean mixing container and stir to dissolve; dose the resultant solution to the aquarium system as required to maintain the alkalinity within a range of 7 - 12 dKH. Up to 60 g per 8-fl. oz. Of purified water may be mixed at once.Advanced Instructions and Guidelines: Create a stock solution by dissolving 30 grams of REEF CODE B-P in 8-fl. oz. of purified fresh water; each ml of the solution will increase the alkalinity in 1 US-gallon (3.785 L) of water by ~1.0 dKH (0.375 meq/L). [Reference: Each g of REEF CODE B-P will increase the alkalinity in 1 US-gallon (3.785 L) of water by ~8.3 dKH (3 meq/L).] If initial alkalinity in the aquarium is below 7 dKH (2.5 meq/L), add stock solution at maximum rate of 10 ml per 20 US-gallons daily until desired alkalinity is attained, then dose daily or weekly as needed (see below). Maintain alkalinity within a range of +/-1 dKH. Once desired alkalinity has been acquired, measure the alkalinity at the same time each day over a one- to two-week period to determine the required rate of alkalinity depletion. To determine daily dosing rate: estimate volume of water in entire aquarium system (US-gal.); divide the daily decrease in alkalinity by 2.1 (when reading dKH); multiply this number by volume of water in system to obtain daily ml of stock solution required to maintain stable alkalinity. Maximum strength of the stock sol�n should not exceed 58.3 g RCBP per 8-fl. oz. purified water. Dose system as required to maintain desired calcium (using REEF CODE A-P) and alkalinity values. Do not mix solutions together; this will cause the active components to precipitate and become ineffective. May be mixed individually in large containers and dosed with a drip- or automated-dosing system; ensure that solutions are entering the system in different areas to prevent precipitation. If adding manually, allow at least 60 seconds to pass between dosing REEF CODE A-P and B-P solutions.

Read more less

Brightwell NeoZeo Zeolite Filter Media Selective zeolite media for placement in reef aquarium media reactors. Overview of Brightwell NeoZeo Zeolite Filter Media Unique zeolitic medium for selective removal of dissolved organic compounds through ionic and molecular adsorption, as well as passive uptake via the beneficial microbes that colonize the media; the combined result of these processes yields improved water quality and an important source of food (bacterioplankton) for corals and other suspension-feeding organisms. Used in conjunction with Brightwell Aquatics MicrōBacter7 and Reef BioFuel, helps establish biological filtration and maintain an ultra-low nutrient environment for the express purpose of enabling coral coloration to be perceived without interference from zooxanthellae pigmentation. Provides a colonization site for the microorganisms responsible for nitrification, denitrification, and organic waste degradation in marine aquaria. Instructions & Guidelines for using NeoZeo from Brightwell Aquatics Rinse material in freshwater prior to initial placement in aquarium system. It must be remembered that NeoZeo is an extremely-effective adsorber of ammonium, and corals that have become accustomed to, and dependant upon, the presence of ammonium are likely to show an initial negative response to the rapid removal of this ion. As expected, this is an issue that is primarily encountered in aquaria that have been established for many years; aquaria that utilize the "NeoZeo system" from the onset are far less-likely to exhibit this sort of ammonium-related issue. The following recommendations are based upon extensive testing and will produce the best results in most aquaria.

Read more less

Brightwell Aquatics MicroBacter Start XLF - 250ml Brightwell Aquatics MicroBacter Start XLF is a professional 15 X strength live tank starter nitrifying bioculture for cycling new freshwater aquaria Features of Brightwell MicroBacter Start XLF Super concentrated 15X Suspension of LIVE non-pathogenic microbes, specifically formulated to extremely rapidly establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification in existing systems. Useful for rapidly re-establishing nitrification bacteria in case of an emergency. Particularly useful in aquaria with high population densities and when adding new fish. Helpful to re-establish nitrifying bacteria after cleaning rocks and surfaces and after use of medications. 1. Rapid reduction of ammonia, and nitrite. 2. Prevents "New Tank Syndrome." Supplied in a proprietary base which provides for maximum longevity. Formulated utilizing extensive data compiled by microbiologists. Overview of Brightwell MicroBacter Start XLF Aquarium Additive MicroBacter Start XLF 15X creates a nitrifying biological filter in freshwater aquaria of all types and is particularly useful for new startups, resulting in cycling in about 5 to 7 days in most cases. It quickly removes toxic ammonia and nitrite naturally through nitrifying bacterial action. Even though this product is potent, it may be overdosed at up to 5 times rated dosage during aquarium upsets. It should be your first choice to remove ammonia during emergencies where the filter has been inadvertently killed. Instructions & Guidelines for using MicroBacter Start XLF from Brightwell Aquatics Important: First, use Brightwell Erase-Cl or similar product to completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not removed will cause it to fail! Shake product vigorously immediately before using. Add the appropriate volume of MicroBacter Start XLF (see below) to the aquarium in an area of high flow to promote dispersion. Do not use any other bacteria product until cycling with this product is complete! To seed Biological Filtration in new aquaria: Add 30 ml (6 capfuls) of MicroBacter Start XLF per 25 US- gallons (95 L) of aquarium water. Add one or more hardy fish. Remove filter floss, turn UV-sterilization off for the complete period of cycling until you are finished dosing this product. Test ammonia and nitrite levels daily or as needed, if either are above .2 ppm, then you can dose again at a lower dose of 10 ml per 25 US-gallons, if desired. At 7 days or longer, Tank is cycled if, and only if, both ammonia and nitrite levels are zero and nitrate is well above zero. To replace bacteria killed by extensive cleaning of substrates and surfaces: add 10 to 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed, and ammonia level. To replace bacteria killed by medications: add 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed. Then add 5 ml per half hour until ammonia levels come down. To perform a Fishless Cycle: Purchase a bottle of MicroBacter QuikCycl to use simultaneously with this product, MicroBacter Start XLF. Fishless cycling requires both products to be used together. This product will provide the bacteria and the QuikCycl will provide the nutrients. Do not add fish, inverts or plants until the tank is cycled!

Read more less

Brightwell Aquatics Shrimp FlorinGro+ Brightwell Aquatics Shrimp FlorinGro+ is a multi-component fertilizer & planted nitrogenous growth accelerator for shrimp & freshwater fish aquariaNitrogen is required by plants in the largest amounts of the three major nutrients: nitrogen, phosphorus, and potassium. Nitrogen is a part of all living cells and is a requisite of the metabolic processes in which proteins, amino acids, coenzymes, and nucleic acids are created. It is an integral part of chlorophyll manufacture through photosynthesis, the process in which light energy is utilized to convert carbon dioxide into carbohydrates, which is in turn used to provide the energy for growth and development.A percentage of the nitrogen in aquaria is contributed as ammonia and ammonium, components of fish waste and the decomposition of nitrogen-bearing molecules, such as latent dissolved and particulate organic material, however this is not always sufficient to meet the nitrogen requirements posed by plants. Particularly in heavily-planted aquaria with intense lighting, CO2 supplementation, and/or a minimal stocking of fish, nitrogen can become a limiting nutrient in plant growth; in extreme cases, it can lead to chlorosis, in which the leaves become pale (particularly on older foliage, which tend to be on the periphery). Nitrogen deficiency tends to cause new leaves to be smaller and paler than normal, and overall plant growth to be stunted.The source of nitrogen utilized in Shrimp FlorinGro+ is derived from nitrate compounds. While plants unquestionably make use of ammonium and the constituents of urea very effectively, our experience and extensive research dictate that these compounds be excluded from Shrimp FlorinGro+ as a result of the clear danger they pose to fishes and other non-plant aquarium inhabitants when aquarium pH is greater than 7.0; we feel that these nitrogen sources are useful to aquatic botanists and horticulturists, but that they are not suited to use in an aquarium. Nitrogen should primarily be present as nitrate and maintained at a concentration of less than 20 ppm. In addition to nitrogen, magnesium, iron, and potassium are important to chlorophyll production.Maintaining a total iron concentration of 0.05 - 0.10 ppm, magnesium concentration of ~5 ppm, and potassium concentration of 15 - 30 ppm, is recommended. Overview of Brightwell Shrimp FlorinGro+ Copper free and shrimp safe. Concentrated source of nitrogen, one of the most important plant nutrients, required for growth and long-term health, and utilized primarily in the production of nucleic acids and proteins, accounting for up to 2% of plant tissue dry weight. Nitrogen is present as nitrate, a form appropriate for use in aquaria (we do not use ammonium which can revert to toxic ammonia in aquaria with pH over 7.0; nor urea which is a source of ammonia). Contains Kelp extract, which provides natural phytohormones found to encourage growth and flowering. Formulated utilizing extensive research on aquatic plant nutrient requirements. Instructions & Guidelines for using Shrimp FlorinGro+ from Brightwell Aquatics For accelerated plant growth: Shake product well before using. The most effective method of using any ion-specific supplement is to determine the ionic concentration in the aquarium prior to supplementing. Maintain the nitrate concentration within a range of 10 - 20 ppm; it is not recommended to exceed 25 ppm nitrate in planted aquaria housing fishes, shrimp or other invertebrates.Basic: First use Shrimp FlorinMulti. Then, for increase plant growth rate, add 4 ml (2 pumps if equipped with pump) of this product per 8 US-gallons (30 L) of aquarium water every other day or as required; this corresponds to 5 ml or 1 capful if not using pump (or ~35 drops) per 10 US-gallons (38 L). When used in this fashion, 500 ml treats up to 1,000 US-gallons (3,800 L).

Read more less

Brightwell Aquatics FlorinBacter Clean Brightwell Aquatics FlorinBacter Clean is a unique freshwater microbial culture & enzyme blend designed to target and clean surfaces of plants, driftwood decorations & tank walls.The concentration of dissolved and particulate organic materials in any aquatic environment can have a significant impact on the overall appearance of, as well as the health of organisms residing within, that system. Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of unsightly coatings; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants.Brightwell Aquatics ShrimpFlorinBacter Clean is a selective complex of extremely effective microbes and enzymes that not only reduce the concentrations of organic nitrogen, ammonia, nitrite, nitrate, phosphate, and organic carbon in all freshwater ecosystems, but make maintenance easy by actually loosening accumulations and coatings. Overview of Brightwell FlorinBacter Clean Copper free and shrimp safe. Complex system of non-pathogenic microbes and natural enzymes, specifically formulated to clean aquarium live rock and decorations in all freshwater & planted fish and shrimp aquariums. Benefits are: Natural cleaning action on all aquarium and decoration surfaces. Loosening of ugly accumulations of unwanted substances and coatings which makes their removal by scraping and vacuuming much easier. Establishment of bacterial colonies that multiply and continue to clean the aquarium. Rapid reduction of organic carbon, ammonia, nitrite, nitrate, and phosphate. Digestion of uneaten/undigested food, excreta, detritus, and other latent organic material, resulting in cleaner and healthier aquarium substrate (without having to physically clean or disturb the substrate bed). Instructions & Guidelines for using FlorinBacter Clean from Brightwell Aquatics Important: First, completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not treated will cause it to fail!Shake product well before using. Mix appropriate volume of ShrimpFlorinBacterClean (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense ShrimpFlorinBacterClean below water level of container or aquarium, be sure to thoroughly clean pipette with fresh (preferably purified) water prior to placing tube back into ShrimpFlorinBacterClean bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s), which can negatively impact the microbes present in ShrimpFlorinBacterClean. For best results, use within 1-year of purchase date.For normal cleaning and to maintain a clean aquarium: Add 10 ml (5 pumps if equipped with a pump or 2 capfuls) per 10 US-gallons (38 L) of aquarium water weekly. Spacing throughout the week is beneficial.For problem aquariums or to rapidly accelerate cleaning: Add up to a maximum of 10 ml (5 pumps if equipped with a pump) per 10 US-gallons (38 L) on the first day, then add up to 4 ml (2 pumps if equipped with a pump) per 10 US-gallons (38 L) of aquarium water daily for 2 weeks or longer as necessary until desired results are achieved. Bacteria work slowly, so full results can take up to 8 to 10 weeks for long neglected systems. If cloudiness develops, stop use until clear again, then resume treatment.Storage: Although product does not require refrigeration, and it can withstand storage at room temperature, for best longevity and highest potency, keep refrigerated at 50 degrees F. Do not freeze!

Read more less

Brightwell Aquatics MicroBacter Start XLF - 500ml Brightwell Aquatics MicroBacter Start XLF is a professional 15 X strength live tank starter nitrifying bioculture for cycling new freshwater aquaria Features of Brightwell MicroBacter Start XLF Super concentrated 15X Suspension of LIVE non-pathogenic microbes, specifically formulated to extremely rapidly establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification in existing systems. Useful for rapidly re-establishing nitrification bacteria in case of an emergency. Particularly useful in aquaria with high population densities and when adding new fish. Helpful to re-establish nitrifying bacteria after cleaning rocks and surfaces and after use of medications. 1. Rapid reduction of ammonia, and nitrite. 2. Prevents "New Tank Syndrome." Supplied in a proprietary base which provides for maximum longevity. Formulated utilizing extensive data compiled by microbiologists. Overview of Brightwell MicroBacter Start XLF Aquarium Additive MicroBacter Start XLF 15X creates a nitrifying biological filter in freshwater aquaria of all types and is particularly useful for new startups, resulting in cycling in about 5 to 7 days in most cases. It quickly removes toxic ammonia and nitrite naturally through nitrifying bacterial action. Even though this product is potent, it may be overdosed at up to 5 times rated dosage during aquarium upsets. It should be your first choice to remove ammonia during emergencies where the filter has been inadvertently killed. Instructions & Guidelines for using MicroBacter Start XLF from Brightwell Aquatics Important: First, use Brightwell Erase-Cl or similar product to completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not removed will cause it to fail! Shake product vigorously immediately before using. Add the appropriate volume of MicroBacter Start XLF (see below) to the aquarium in an area of high flow to promote dispersion. Do not use any other bacteria product until cycling with this product is complete! To seed Biological Filtration in new aquaria: Add 30 ml (6 capfuls) of MicroBacter Start XLF per 25 US- gallons (95 L) of aquarium water. Add one or more hardy fish. Remove filter floss, turn UV-sterilization off for the complete period of cycling until you are finished dosing this product. Test ammonia and nitrite levels daily or as needed, if either are above .2 ppm, then you can dose again at a lower dose of 10 ml per 25 US-gallons, if desired. At 7 days or longer, Tank is cycled if, and only if, both ammonia and nitrite levels are zero and nitrate is well above zero. To replace bacteria killed by extensive cleaning of substrates and surfaces: add 10 to 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed, and ammonia level. To replace bacteria killed by medications: add 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed. Then add 5 ml per half hour until ammonia levels come down. To perform a Fishless Cycle: Purchase a bottle of MicroBacter QuikCycl to use simultaneously with this product, MicroBacter Start XLF. Fishless cycling requires both products to be used together. This product will provide the bacteria and the QuikCycl will provide the nutrients. Do not add fish, inverts or plants until the tank is cycled!

Read more less

Brightwell Razor Freshwater - 500ml Unique Freshwater Systemic System Cleaner designed to target and clean surfaces of rock, driftwood decorations and tank walls Razor Freshwater Features Plant safe, complex systemic cleaning polymer product, specifically formulated to clean aquarium rock and decoration surfaces systemically. Benefits Include: 1. Gentle loosening of ugly accumulations of unwanted substances, debris and coatings which makes their removal by scraping and vacuuming much easier. 2. Flocculation of particulate matter from leftover food, detritus and precipitation 3. Prevents particles from settling on rocks and accumulating 4. Overall cleaning action making the aquarium cleaner, clearer and more desirable Things to Consider when Using Razor Freshwater from Brightwell Aquatics It is recommended that activated carbon use be suspended while using this product, as activated carbon can reduce the product's effectiveness. Once the aquarium has attained the desired appearance, activated carbon can be put back into the filtration system, if desired. Due to the rate at which filters collect particulate material, it may be necessary to clean mechanical filter pads and other media every other day while dosing this product. Simultaneous use with FlorinBacter will have a very synergistic effect.Sensible feeding should be the first step taken to minimize turbidity and the concentration of dissolved organic materials in any marine aquarium. Water of high clarity that is low in dissolved organic material and possesses the proper parameters is the basis for a healthy aquarium system!Razor Freshwater is slow acting and may require multiple applications to achieve the effect desired by the user. Used as directed, it is safe for freshwater and brackish fishes, and aquarium live plants, however, as all animals are individuals, and water conditions vary in many aquariums, animals should be observed closely during use, for signs of stress. Do not use with crustaceans (shrimp, crabs or lobsters). If signs of stress occur, or plants are affected negatively, reduce or discontinue use as necessary. If symptoms persist, do a partial water change and add carbon. Instructions for Using Razor Freshwater Shake product well before using! For every 10 gallons ( 38 L ) of aquarium volume, use 1 ml and for every 50 gallons ( 190 L ) of aquarium volume, use 5 ml of this product in a high flow area of the main aquarium. Repeat every 3 days until desired results are obtained. Maintenance: Then dose once a week to maintain the aquarium.

Read more less

Brightwell Aquatics Vitamarin-F Brightwell Aquatics Vitamarin-F is an advanced multi-vitamin supplement for all freshwater fishVitamins are compounds required in minute concentrations for vital metabolic reactions; the amounts of vitamins required for a given species varies. Short-term vitamin deficiencies can typically be tolerated by most organisms, however long-term deficiencies tend to result in abnormalities, poor health, and eventually even death of the specimen. Conversely, if severely overdosed, ingested vitamins can have a negative impact on a specimen by way of toxicity, though the impact is unlikely to be permanent. Decreasing the vitamin dosage typically results in full recovery of the affected specimen. It is recommended that Vitamarin-F be utilized as a soak for vitamin-deficient foods, but not through direct addition to the water. Freshwater fish do not drink much water; rather, it enters their bodies as a result of osmotic pressure gradients. Resultantly, addition of Vitamarin-F directly to aquarium will be of extremely little benefit. All Brightwell Aquatics liquid water care supplements are made with purified water and high purity materials. We develop formulae for aquaria based on empirical data, using observation and measurement rather than theory. Vitamarin-F does not require refrigeration, however storage in a cool, shaded area will prolong the activity of the vitamins. Refrigeration will maximize the shelf-life of the product. Overview of Brightwell Shrimp VitamarinF Full-spectrum vitamin supplement formulated to benefit freshwater fishes and motile invertebrates. Provides a full-complement of water- and fat-soluble vitamins in ratios found to improve overall health and coloration. Useful when preparing fishes for spawning; also benefits parents caring for their brood. Requires no refrigeration. Composed of purified water and ultra-high purity materials. Formulated by a marine scientist. Instructions & Guidelines for using Shrimp VitamarinF from Brightwell Aquatics To fortify food:Place food in a clean container such as a small bowl or cup and add only enough Vitamarin-F to saturate. Allow at least 5 minutes to elapse before feeding, enabling adequate time for the vitamins to become thoroughly absorbed by the food. Repeat with each feeding, or as deemed necessary by the general appearance of the organisms consuming the food. When preparing fish for spawning, feeding frequency is often increased; limit the use of Vitamarin-F to twice each day. Apply same rule when feeding parents caring for young fish. Be sure to remove any uneaten food from the aquarium after 5 - 7 minutes to ensure that water quality is not negatively-impacted by excessive nutrient input. Avoiding overfeeding is a crucial aspect of successful aquarium husbandry. Liquid food suspensions may be fortified by adding 1 ml (approximately 8 drops) Vitamarin-F per 10 ml of food suspension; stir to mix and allow 5 minutes to elapse before feeding.

Read more less

Brightwell Razor Freshwater - 250ml Unique Freshwater Systemic System Cleaner designed to target and clean surfaces of rock, driftwood decorations and tank walls Razor Freshwater Features Plant safe, complex systemic cleaning polymer product, specifically formulated to clean aquarium rock and decoration surfaces systemically. Benefits Include: 1. Gentle loosening of ugly accumulations of unwanted substances, debris and coatings which makes their removal by scraping and vacuuming much easier. 2. Flocculation of particulate matter from leftover food, detritus and precipitation 3. Prevents particles from settling on rocks and accumulating 4. Overall cleaning action making the aquarium cleaner, clearer and more desirable Things to Consider when Using Razor Freshwater from Brightwell Aquatics It is recommended that activated carbon use be suspended while using this product, as activated carbon can reduce the product's effectiveness. Once the aquarium has attained the desired appearance, activated carbon can be put back into the filtration system, if desired. Due to the rate at which filters collect particulate material, it may be necessary to clean mechanical filter pads and other media every other day while dosing this product. Simultaneous use with FlorinBacter will have a very synergistic effect.Sensible feeding should be the first step taken to minimize turbidity and the concentration of dissolved organic materials in any marine aquarium. Water of high clarity that is low in dissolved organic material and possesses the proper parameters is the basis for a healthy aquarium system!Razor Freshwater is slow acting and may require multiple applications to achieve the effect desired by the user. Used as directed, it is safe for freshwater and brackish fishes, and aquarium live plants, however, as all animals are individuals, and water conditions vary in many aquariums, animals should be observed closely during use, for signs of stress. Do not use with crustaceans (shrimp, crabs or lobsters). If signs of stress occur, or plants are affected negatively, reduce or discontinue use as necessary. If symptoms persist, do a partial water change and add carbon. Instructions for Using Razor Freshwater Shake product well before using! For every 10 gallons ( 38 L ) of aquarium volume, use 1 ml and for every 50 gallons ( 190 L ) of aquarium volume, use 5 ml of this product in a high flow area of the main aquarium. Repeat every 3 days until desired results are obtained. Maintenance: Then dose once a week to maintain the aquarium.

Read more less

Brightwell Aquatics MicroBacter Start XLF - 2 Liter Brightwell Aquatics MicroBacter Start XLF is a professional 15 X strength live tank starter nitrifying bioculture for cycling new freshwater aquaria Features of Brightwell MicroBacter Start XLF Super concentrated 15X Suspension of LIVE non-pathogenic microbes, specifically formulated to extremely rapidly establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification in existing systems. Useful for rapidly re-establishing nitrification bacteria in case of an emergency. Particularly useful in aquaria with high population densities and when adding new fish. Helpful to re-establish nitrifying bacteria after cleaning rocks and surfaces and after use of medications. 1. Rapid reduction of ammonia, and nitrite. 2. Prevents "New Tank Syndrome." Supplied in a proprietary base which provides for maximum longevity. Formulated utilizing extensive data compiled by microbiologists. Overview of Brightwell MicroBacter Start XLF Aquarium Additive MicroBacter Start XLF 15X creates a nitrifying biological filter in freshwater aquaria of all types and is particularly useful for new startups, resulting in cycling in about 5 to 7 days in most cases. It quickly removes toxic ammonia and nitrite naturally through nitrifying bacterial action. Even though this product is potent, it may be overdosed at up to 5 times rated dosage during aquarium upsets. It should be your first choice to remove ammonia during emergencies where the filter has been inadvertently killed. Instructions & Guidelines for using MicroBacter Start XLF from Brightwell Aquatics Important: First, use Brightwell Erase-Cl or similar product to completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not removed will cause it to fail! Shake product vigorously immediately before using. Add the appropriate volume of MicroBacter Start XLF (see below) to the aquarium in an area of high flow to promote dispersion. Do not use any other bacteria product until cycling with this product is complete! To seed Biological Filtration in new aquaria: Add 30 ml (6 capfuls) of MicroBacter Start XLF per 25 US- gallons (95 L) of aquarium water. Add one or more hardy fish. Remove filter floss, turn UV-sterilization off for the complete period of cycling until you are finished dosing this product. Test ammonia and nitrite levels daily or as needed, if either are above .2 ppm, then you can dose again at a lower dose of 10 ml per 25 US-gallons, if desired. At 7 days or longer, Tank is cycled if, and only if, both ammonia and nitrite levels are zero and nitrate is well above zero. To replace bacteria killed by extensive cleaning of substrates and surfaces: add 10 to 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed, and ammonia level. To replace bacteria killed by medications: add 30 ml per 25 US-gallons (95 L) depending on perceived damage to filter bed. Then add 5 ml per half hour until ammonia levels come down. To perform a Fishless Cycle: Purchase a bottle of MicroBacter QuikCycl to use simultaneously with this product, MicroBacter Start XLF. Fishless cycling requires both products to be used together. This product will provide the bacteria and the QuikCycl will provide the nutrients. Do not add fish, inverts or plants until the tank is cycled!

Read more less