Hydros

Hydros

Hydros Controllers

 

Hydros controllers are a controller that was started by Coralvue - located in Slidell, Louisiana, was founded in 2002 by David and Brandi D’Aquin to offer aquarium product solutions to brick-and-mortar fish supply stores. Since then, CoralVue has become one of the largest distributors in the United States, serving every segment of the aquaria market, including multiple online specialty retailers, public aquariums, educational institutions, coral farmers, fish breeders, and more.

CoralVue represents a wide range of industry-leading brands, including Reef Octopus, Abyzz, Reef Endurance, Klir, IceCap, Easy Reefs, Kamoer, Hydros, and more!

63 products

Availability

  • Hydros Kraken Power Center Hydros Kraken Power Center full front view

    Hydros Kraken Power Center

    In Stock

    Hydros Kraken Power Center Overview The Kraken introduces a new concept in aquarium controllers and provides high-power 24V DC switched outputs and a large heavy-duty power supply. This allows "power bricks" and "wall warts" to be removed from aquarium systems, significantly reducing wire clutter. Hydros Kraken is Ultimate Aquarium Power Strip System Critical Equipment The HYDROS Kraken is an eight Force Port (24V DC) energy center and controller hybrid specifically designed to replace the power supplies of equipment like flow pumps, return pumps, and LED lights. Each individually controlled Force Port is built into the HYDROS controller for the highest level of security. The Kraken has an external industrial-grade Meanwell power supply with a 20amp/380w max power capacity, and it is designed to pass ETL/UL certification. Besides powering on and off the controllable Force Ports, the Kraken also has four 12V Drive Ports for cabinet lighting, auto-top-off (ATO) pumps, and solenoids. The HYDROS Kraken is passively cooled, and the controller runs silently with its isolated power circuitry. Best of all, each of the eight Force Ports offer individual power monitoring. Besides reducing the amount of 24V power bricks lying around the aquarium, the HYDROS Kraken is also a fully functioning HYDROS system controller capable of taking over intelligent decisions based on the status of other HYDROS devices within the Collective. The two HYDROS Command Bus Ports on the Kraken allow for a wired connection to any other HYDROS controller to form a collective of all Controls for the ultimate fail safe. system. Control and monitor your Kraken power center from anywhere in the world using the technologically advanced HYDROS cloud-based app. The Kraken can also monitor and wireless control up to eight HYDROS WiFi devices. Features Power up to 20 amps of system-critical life support equipment Eliminates clutter by removing the need for eight individual 24V power supplies The Kraken is a full brain that can share and take over the decision-making of a HYDROS Collective Control up to eight WiFi devices like fish feeders, smart outlets, and even additional WiFi power strips Command Bus Port provides power to add redundancy power to your HYDROS Collective Designed to pass ETL/UL Certification Universal voltage works with both 110 and 220V External Industrial Grade Meanwell Super Brick No noisy fans, the Kraken is entirely passively cooled Optical isolation between the power circuitry and the control circuitry. This provides safety failure and isolates the control circuitry to reduce noise. Engineered, built, and supported in the USA. Force Ports 8 Available Eight controllable DC power ports, each with individual power monitoring capabilities to safely manage aquarium equipment like lighting, water pumps, protein skimmers, filters, and much more using 24V power. Each high-current 24-volt Force Port provides up to 10amps of 24V DC power to eliminate equipment's "power bricks" and/or "wall warts" that are typically required to run. Hydros Kraken Force Port Examples Include Flow pumps 24V return pumps Measurement systems Other Hydros devices Controllers Small to medium-sized aquarium lightsDrive Ports 4 Available The Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported include: Auto Top-Off (ATO) pumpsDosing pumpsCooling fansCabinet LED lightsSolenoids to control reverse osmosis systemsSteering valves and relays stirrersHydros iV testing vesselBattery Backup Port 1 Available A specific connection for an external 12V Lead Acid Battery to keep your system alive during power failures. A battery will keep the entire HYDROS system running in Low Power Mode during a power failure. An internal trickle charger keeps these batteries ready to use. The voltage and current on the battery are monitored and reported to the user. This battery can be as large or small as you choose, from small sealed lead acid batteries to large arrays of boat batteries. The Kraken's internal charger can be disabled if you prefer to use a battery charger. Command Bus 2 Available The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe. External Super Brick 1 Available A large 24V "super brick" IP65-rated industrial power supply to run all the outputs and the entire HYDROS system. The Super Brick can provide up to 20 Amps of 24 Volt DC power (480 watts). Supply is manufactured by Meanwell, a highly trusted and regarded power supply company. Specifications Max Per Force Port: 10A Total Max Amperage: 20A Dimensions 9.5 x 4.75 x 3.2 (LxWxH)

    In Stock

    $943.99

  • Hydros Control XD Aquarium Controller Hydros Control XD Aquarium Controller side view

    Hydros Control XD

    In Stock

    Hydros Control XD Overview A HYDROS controller with 3 Universal Drive Ports dedicated to powering small 12V devices. Capable of driving cabinet LEDs, solenoids, ATO pumps, dosing pumps, and much more. About Aquarium Controller The Control XD is a compact yet powerful controller with three 12-volt DC Drive ports that can run dosing pumps, LED cabinet lights, fans, and more. It also includes a Power port providing another layer of redundancy to the Control system. Set up is quick and easy, making this ideal for beginner and advanced hobbyists. All HYDROS products are engineered, assembled, and supported in the USA. is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. Features HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Drive Port - 2 AvailableThe Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported by Drive Ports include Auto Top-Off (ATO) pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe.

    In Stock

    $337.99

  • Hydros Control X3 Hydros Control X3 3/4 and side view of base controller unit

    Hydros Control X3

    In Stock

    Hydros Control X3 Overview The HYDROS Control X3 can connect to two sensor devices including temperature sensors, water level sensors, and leak detectors. The device also includes a Probe Port for monitoring pH or ORP levels, Control X3 can send alerts and notifications and control outlets for lights, pumps, feeders, and more. Achieve Ultimate Aquarium Control with Control X3 Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor temperature, detect leaks, power equipment, control outlets, and more with ease through the HYDROS App.Versatile and Expandable without Extra ModulesUse any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities.IP-65 Rated -Splash Proof, Dust Proof, and Secure ConnectionHYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 2 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Probe Port - 1 AvailableOne of the most remarkable ports on the HYDROS Control X3 is the Probe Port. You can connect an ORP or a pH probe to the Probe Port but, this is no ordinary pH input! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system. Galvanic isolation prevents interference with other accessories connected to the system like motors and pumps. Digital Galvanic isolation preserves the accuracy of the measurement by converting the signal to a digital domain before crossing the isolation threshold. Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe. Please note that this is ONLY for the Control X3. Nothing else is included!

    In Stock

    $337.99

  • Buy Hydros Wave Maxspect 150/250/280 Gyre Engine Pump Adapter at www.jlaquatics.com

    Hydros Wave Maxspect 150/250/280 Gyre Engine Pump Adapter

    In Stock

    Adapter to connect Maxspect Gyre 150/250 or 280 pumps to your Hydros Wave Engine.

    In Stock

    $19.99

  • Special Order Coralvue Controllers & Monitors Hydros Tunze Wave Engine Pump Adapter

    Hydros Tunze Wave Engine Pump Adapter

    In Stock

    The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine.You will also need a HYDROS WaveEngine 0-10V Quad Cable for this application.The way it works is as follows: Connect the Quad Cable to the WaveEngine Connect the Tunze Adapter to the Quad Cable Connect the Tunze Adapter to your Tunze pump controller You can control up to four 0-10V Tunze pumps with the WaveEngine. To do this, you would need the following: 1 x HYDROS WaveEngine 0-10V Quad Cable 4 x HYDROS WaveEngine 0-10V Tunze Adapter* *You don't have to use four pumps. If you only had two pumps, you would only need 1 x Quad Cable and 2 x Tunze Adapters. We used four as our example since you can connect a maximum of four pumps with a Quad Cable.The reason an additional adapter is needed to control Tunze pumps with a WaveEngine is because Tunze pump controllers have a 9-pin jack rather than the more common 3.5 mm stereo jack.Combine your Tunze pumps with pumps from other brands using the HYDROS WaveEngine for a complete water circulation solution!

    In Stock

    $23.99

  • Special Order Buy Hydros Control X4 in Canada Hydros Control 4

    Hydros Control X4

    In Stock

    Hydros Control X4 Overview The HYDROS Control X4 is a powerful and robust aquarium controller capable of performing all essential functions needed to maintain a healthy aquarium without the need for extra expensive modules. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Just one Control X4 can monitor temperature, pH, ORP, and water level, to name a few, and control pumps, timers, level sensors, and much more thanks to its technologically advanced design. It can be used as a standalone controller for saltwater aquariums, freshwater tanks, pond applications, or it can be added to other HYDROS Controls to build a more extensive system. The Control X4 operates on a HYDROS Safety Net and is rated IP-65 to keep your equipment and aquatic life alive and thriving. All HYDROS products are engineered, assembled, and supported in the USA. is Versatile and Expandable without Extra Modules Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities. Features HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP-65 rated HYDROS enclosure and aircraft-style connectors ensure long term reliability in the face of splashes and corrosive salt spray. What you can expect from your HYDROS Smart Device Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app Ability to monitor and control your HYDROS device(s) locally through WiFi A fast dual-core 32-bit processor that allows control decisions to be made within each device Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device HYDROS Command Bus connections to transfer data and power to devices Sense Port - 4 AvailableThe Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. Hydros Controller Sense Ports currently support Temperature probes Optical level sensors (single and dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches Drive Port - 2 AvailableThe Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported by Drive Ports include Auto Top-Off (ATO) pumps Cooling fans Cabinet LED lights Solenoids to control reverse osmosis systems 0-10V PortThe HYDROS Control 4 has 0-10V I/O (input and output) ports that allow it to control and receive commands from other HYDROS devices and accessories from other brands. A legacy automation system can provide input via the 0-10V Ports. They can control variable speed pumps and can also be used to monitor simple switch closures, like push buttons or float switches.Command Bus - 2 AvailableThe HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate fail safe. Please note that this is ONLY for the Control X4. Nothing else is included!

    In Stock

    $590.99

  • Hydros Kraken Force Port Power Cable

    Hydros Kraken Force Port Power Cable

    In Stock

    Hydros Kraken Force Port Power Cable Overview This HYDROS Force Port Power Cable is used to connect the Kraken to power a WaveEngine LE, WaveEngine, XD, or Control X10. This 6ft cable has two 4-pin GX12-4 fittings. One end attaches to any of the 8 Force Ports on the Kraken and the other end to the power port on any HYDROS Control Power Port Only (WaveEngine LE, WaveEngine, XD, or Control X10).

    In Stock

    $23.99

  • Coralvue Controllers & Monitors

    Hydros 3.5mm Adapter Cable

    In Stock

    Hydros 3.5mm Adapter Cable Overview Adapt third-party 3.5mm plug sensors for use with HYDROS Sense Ports. This cable uses a GX12-4 aviation connector on the HYDROS end and a 3.5mm mono plug on the accessory end to integrate analog devices like mechanical float switches, magnetic reed sensors, or rope leak sensor leads into your HYDROS ecosystem without custom wiring. Features Plug-and-play conversion from 3.5mm mono plug to HYDROS Sense Port (GX12-4) Enables analog OPEN/CLOSE style sensors to report reliably to HYDROS Controls Molded strain relief and secure threaded aviation connector for stable installs Works with leak, float, and contact-closure style accessories Specifications Connectors: 3.5mm mono plug to GX12-4 Sense Port Function: Adapter for analog OPEN/CLOSE sensors to HYDROS Sense Ports UPC/EAN: 850009641267 Compatibility: HYDROS Controls with Sense Ports (e.g., X2, X3, X4, XS, Minnow) Directions Power down your HYDROS Control before connecting new sensors Thread the GX12-4 connector onto the Sense Port until finger-tight; do not overtighten Insert the 3.5mm plug from your sensor fully into the adapter jack Route cables with a drip loop and avoid tight bends; restore power and configure the input in the HYDROS app

    In Stock

    $19.99

  • new-label HYDROS Start Aquarium Controller HYDROS Start Aquarium Controller and additional cords

    Hydros Start

    HYDROS Start Aquarium Controller OverviewThe HYDROS Start is an affordable entry controller that monitors temperature and powers up to four critical devices while leaving room to expand. With built in WiFi control and a simple app you can add sensors for water level leaks flow and more and scale with additional HYDROS gear as your system grows.Features Four controllable AC outlets to automate heaters pumps lights skimmers and more Four Sense Ports accept temperature water level leak flow and TDS sensors Two Drive Ports power 12V devices such as ATO and dosing pumps cooling fans cabinet LEDs and small solenoids Two Command Bus ports for expansion and redundant failsafe linking with other HYDROS controls Control up to eight WiFi devices via the HYDROS app with rules schedules and alerts Fast dual core processor local and cloud control user defined notifications and internal health monitoring Specifications SKU: HDRS START Ports: 4 AC outlets 4 Sense Ports 2 Drive Ports 2 Command Bus AC Outlet Capacity: 8A max per outlet 14A total Drive Port Capacity: 1.5A per port 3A total Dimensions L x W x H: 9.5 x 4.75 x 3.25 in Power Cord Length: 6 ft Compatibility and Upgrade PathsWorks with HYDROS accessories including optical level sensors leak detectors flow sensors TDS sensors ATO and dosing pumps fans cabinet LEDs small solenoids and the HYDROS IV. Expand control using HYDROS Smart Plugs 4 Outlet WiFi AC Power Strips and XP8 power centers all managed in the HYDROS app sold separately.Maintenance and CareMount the controller above the waterline with a drip loop keep vents clear and avoid moisture exposure. Do not exceed 8A per outlet or 14A total. Update firmware through the HYDROS app periodically and audit outlet assignments after adding new equipment.Warranty and ServiceBacked by a 1 year limited warranty with support through the CoralVue Support Portal; warranty starts on purchase date and covers defects in materials and workmanship per CoralVue terms.Shipping and Handling NotesShips as an electronic controller; handle gently and keep dry. Verify packaging condition on arrival and install on a stable dry surface away from salt spray and splashes preferably on a GFCI protected circuit.DirectionsMount the controller connect the included temperature sensor plug life support devices into the four AC outlets download the HYDROS app connect Start to WiFi name outputs set schedules and rules and test each fail safe before regular operation.What's Included HYDROS Start Controller Temperature Sensor

    $469.99

  • new-label Hydros System Command Bus Cable - 14 Foot

    Hydros System Command Bus Cable - 14 Foot

    In Stock

    Hydros System Command Bus Cable - 14 Foot Overview Extra-long Command Bus cable for spanning larger aquarium rooms or fish rooms. Carries both data and power between HYDROS devices so your Collective stays synchronized over distance. Features Long-run 5-pin cable for complex or spread-out installs Data + power capable to reduce separate power bricks where supported Durable jacket and molded ends handle repeated service Works across all HYDROS devices with Command Bus ports Specifications Length: 14 ft Connectors: HYDROS 5-pin Command Bus (Data + Power) UPC/EAN: 850009641472 Compatibility: HYDROS devices with Command Bus ports Directions Power off the system before connecting Attach between Command Bus ports; avoid sharp bends and pull tension Add Command Bus Terminators to any open ports Re-energize and check Collective health/status in the HYDROS app

    In Stock

    $38.99

  • new-label Hydros iV Pro Isolated Testing Vessel Hydros iV Pro Isolated Testing Vessel close up view of the front of this product

    Hydros iV Pro Isolated Testing Vessel

    In Stock

    Hydros iV Pro Isolated Testing Vessel Overview HYDROS iV PRO Isolated Testing Vessel is a precision-engineered solution for reef tank automation that ensures your water testing is clean accurate and repeatable. Built to integrate seamlessly with the HYDROS Control ecosystem this chamber isolates water samples from your main system to eliminate cross contamination turbulence and microbubbles that can affect sensitive test results. Perfect for alkalinity tests and other automated parameter checks the iV PRO provides a dedicated chamber for clean water access helping your sensors and dosing systems operate at peak accuracy. This professional-grade vessel is ideal for hobbyists and reef keepers who demand data they can trust. Key Features Purpose-built for HYDROS automated testing systems Maintains isolated testing to avoid cross contamination Enhances accuracy by eliminating flow-based reading interference Supports precise sensor readings and reliable dosing operations Simple integration with existing HYDROS gear Compact durable and made from reef-safe materials Recommended Uses Alkalinity monitoring with auto testers Sensor calibration zones for pH ORP or conductivity probes Dosing control to prevent chemical cross-mixing Dedicated low-flow sample environment away from display tank What's Included 1x HYDROS iV PRO Isolated Testing Vessel 2x HYDROS bulkhead fittings 2x Tubing inserts for flow control Mounting bracket and screws Quick start installation guide Why Choose iV PRO Precision reefkeeping requires stable and trustworthy data. The HYDROS iV PRO gives you the control and isolation needed to optimize automated testing and dosing with confidence. Say goodbye to skewed readings

    In Stock

    $314.99

  • new-label Hydros Control X3-Salinity Controller Hydros Control X3-Salinity Controller front face featuring 2 sense ports, 1 salinity port, and 2 command bus ports.

    Hydros Control X3-Salinity

    In Stock

    HYDROS Control X3-S (Controller Only)The HYDROS Control X3-S is a standalone aquarium controller that connects to multiple sensors and probes to monitor and manage your tank environment with precision and reliabilityFeatures of the HYDROS Control X3-S Connects up to two sensor devices including temperature sensors water level sensors and leak detectors Probe Port for pH or ORP monitoring with digital galvanic isolation IP65-rated enclosure provides splash and dust proof protection Fast dual-core 32-bit processor for on-device decision making Internal health monitoring reports voltage current CPU status and temperature Cloud-based and local WiFi control via the HYDROS mobile app HYDROS Command Bus for power and failsafe communication HYDROS Control X3-S Specifications Rating: IP65 splash-proof dust-proof Processor: Dual-core 32-bit CPU Sensor Ports: 2 Sense Ports and 1 Probe Port Sense Port Compatibility: temperature optical level capacitive level rope leak point leak flow rate magnetic and push-button sensors Probe Port Compatibility: pH and ORP probes with galvanic isolation Communication: WiFi & HYDROS Safety Net mesh network Power: via HYDROS Command Bus (power supply not included) What's included with your new HYDROS Control X3-S HYDROS Control X3-S controller module Command Bus cable Mounting bracket User manual and quick start guide Requirements Mobile device with the HYDROS app Power supply (not included) Salinity Probe Kit for conductivity monitoring (not included) Warranty1 Year limited warranty covering defects in material and workmanship from date of purchaseShipping NotesShips in protective packaging Avoid direct water jets For full support visit the CoralVue Support Portal.

    In Stock

    $353.99

  • Special Order Hydros Flow Sensor - 2 Inch Hydros Flow Sensor - 2 Inch assembled and ready to measure water flow

    Hydros Flow Sensor - 2 Inch

    Hydros Flow Sensor - 2 Inch Overview The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) Monitor Water Flow with The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it. It is safe for use in freshwater and saltwater aquarium systems. The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet. Four Sizes are Available 3/4" Flow Sensor: Flow Range of 40- 800GPH 1" Flow Sensor: Flow Range of 50-1500GPH 1.5" Flow Sensor: Flow Range of 100-2500GPH 2" Flow Sensor: Flow Range of 200-4050GPH All flow sensors come with schedule 80 PVC Unions, and have an 8' wire length to plug into your Hydros Sense Port. While no power supply is needed, a Hydros Control with an available Sense Port is required for operation.

    $196.99

  • Hydros Flow Sensor - 1.5 Inch Hydros Flow Sensor - 1.5 Inch assembled and ready to measure aquarium water flow

    Hydros Flow Sensor - 1.5 Inch

    In Stock

    Hydros Flow Sensor - 1.5 Inch Overview The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) Monitor Water Flow with The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it. It is safe for use in freshwater and saltwater aquarium systems. The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet. Four Sizes are Available 3/4" Flow Sensor: Flow Range of 40- 800GPH 1" Flow Sensor: Flow Range of 50-1500GPH 1.5" Flow Sensor: Flow Range of 100-2500GPH 2" Flow Sensor: Flow Range of 200-4050GPH All flow sensors come with schedule 80 PVC Unions, and have an 8' wire length to plug into your Hydros Sense Port. While no power supply is needed, a Hydros Control with an available Sense Port is required for operation.

    In Stock

    $163.99

  • Special Order Coralvue Controllers & Monitors

    Hydros Wave Maxspect 130/230 Gyre Engine Pump Adapter

    Adapter to connect Maxspect Gyre 130 or 230 pumps to your Hydros Wave Engine.

    $19.99

You have seen 63 out of 63 products

Login

Forgot your password?

Don't have an account yet?
Create account