Brightwell Aquatics X-Port NO3 Brick

The Brightwell Aquatics Xport NO3 Brick is an ultra-activated denitrification Brick Media doped with Elemental Sulfur, for Superior Performance Characteristics

Overview of Brightwell X-Port NO3 Brick

• Highest porosity and largest useable surface area, per unit weight or volume, of all filtration media available anywhere
• Provides huge amounts of aerobic and anaerobic surface area for efficient bacterial colonization.
• Provides over 71,000 square feet (6,596 square meters) of surface area per liter of medium. One brick has about 100,000 square feet of useable surface area for bacterial colonization.
• Also reduces phosphate significantly and dissolved organics.

• So porous that it wicks water and stays wet for days when drained, allowing bacteria to remain viable after an equipment failure and ready for the repair.
• Doped with Aragonite to buffer pH at the bacteria level, preventing acid buildup which eventually would kill the bacteria and reduce capacity. (Which is what happens in competing products)

Dimensions: 9" x 4.5" x 2.5"

You can use more bricks than the capacity shown above. You can't have too much filtration, the bacterial growth will be self limiting. It is prudent to use a whole brick even in smaller systems down to about 50 U.S. gallons. If the system is smaller than that, then use the cubes instead. For nitrification, or removal of ammonia and nitrite, employing the brick aerobically, or above the water line will provide maximum results. To do this, mount the brick in air, above the water level, and run a small stream of water through the brick. It is not necessary or desirable to run the whole flow of the main system pump through the brick. A flow of about 40 to 80 liters per hour is ideal. An adjustable flow control will allow you to adjust the water flow to only that which will flow through (and not around) the brick. On the other hand, removing nitrate is an anaerobic process and limiting oxygen to the brick as much as possible will maximize the nitrate removal. In this case, mount the brick beneath the water surface in the sump in a very low flow area, if possible.

To use one brick for both aerobic nitrification and anaerobic denitrification, mount the brick below the water surface and provide medium flow around it. The bacteria growing in the top 1/4" of the surface of the brick will be aerobic and will use up all the oxygen so that the inside of the brick goes anoxic or anaerobic. Anaerobic denitrifying bacteria will then colonize the internal surfaces of the brick and you will get both nitrification on the surface and denitrification in the internal parts.

While the NO3 Brick will perform both nitrification and denitrification, if your need is primarily for nitrification (removal of ammonia & nitrite), you should purchase the BIO Brick instead or in addition.

One important criteria in marine systems is gas exchange. Xport is the best bacterial media in the world, but it is not good at gas exchange. Bio balls are the best for gas exchange, so any system will work better with a small stack of bio balls placed in the main flow (in air).

Instructions & Guidelines for using AngeLixir from Brightwell Aquatics

Use one XPort NO3 Brick for every 1,000 U.S. gallons ( 3,800 L ) of system capacity, more for heavy bio loads. Rinse material well with aquarium water or purified tap water. For superior results, seed the material using FlorinBacter, MicroBacter7 or X-Port NO3 Brick, as appropriate for your aquarium, by placing XPort NO3 Brick in a plastic container, filling it with aquarium water, and then adding the full recommended dose of either bacterial product, based on the size of your aquarium, to that container. Allow to stand overnight and then add the seeded XPort NO3 Brick to your system.

You may also add the water back to your aquarium, if desired. It is recommended that you use sponge, fine filter floss or other mechanical filtration ahead of XPort NO3 Brick to prevent clogging with organic material. For maximum results, also provide a good carbon source for growing bacteria, such as Brightwell Katalyst bio pellets or liquid Reef BioFuel or Florin Axis, as appropriate for your aquarium, as directed on their label.

FREE SHIPPING OVER $119!*

- does not apply to livestock -

$11.99 FLAT RATE FOR LESS THAN $119.00 - CANADA WIDE!

*EXCEPTIONS:

• Any heavy or bulky items will incur a 100% charge of the actual shipping cost (valid for both Canada and the US). Heavy bulky items include (but are not limited to): salt, dry rock, sand, chillers, sumps, aquariums, stands, and some filter media.
• Frozen or perishable food can only be shipped via UPS Express. We have discounted the express shipping of these items to help the hobbyist out.
• Livestock is covered by a different shipping policy. To view the policy and further information regarding shipping livestock, click here.

GENERAL NOTES:

• We always make our best effort to ship your order via the carrier chosen during the check-out process; however, for some multi-piece shipments and/or remote destinations, we must reserve the right to use another carrier at our discretion (and without prior notice). If you require notice of any changes made to the carrier, please mention it in the special instructions during check-out.
• Upon request, we will ship your dry goods as per your specifications (courier, airlines, on your account, etc.).
• Quoted rates are the carriers live discounted shipping rates after adjusting for any/all shipping promotions.

Return Policy — Aquarium Equipment & Supplies

• All returns and/or exchanges must be made within 30 days of receipt of product.
• Before returning or exchanging any goods, you must contact J&L Aquatics to obtain a Return Merchandise Authorization (RMA). Items returned without prior authorization will be declined.
• Returned items must be unused, in original packaging, in as-new condition, and in perfect sellable condition. All returns are subject to inspection upon receipt.
• A 15% restocking fee applies to all online returns. This fee includes the cost of outbound shipping.
• Customer is responsible for return shipping costs on standard returns.
• Order cancellations made before shipping are not subject to a restocking fee.

Non-Returnable Items

• Special order items
• Clearance / final sale items
• Open box items

Regular sale items (non-clearance) are returnable within the 30-day return window, subject to our standard return conditions.

Defective, Warranty & DOA Items

• If you receive an item that is defective, not working, or dead on arrival (DOA), please contact us as soon as possible.
• Confirmed defective and warranty returns have no restocking fee and no Affirm fee. Customer does not pay return shipping — J&L Aquatics will provide a prepaid return label.
• All defective claims are subject to inspection. Items showing signs of customer damage, improper installation, or misuse are not covered under warranty.

Carrier Damage & Lost in Transit

• If your order arrives damaged by the carrier or is lost in transit, please contact us right away with:Photos of the damaged product (if applicable)Photos of the damaged box/packaging (if applicable)A description of the issue
• Important — Do not throw out any packaging! Please keep all original packaging, boxes, and packing materials. These are required to process your claim. Discarding packaging may affect our ability to resolve your claim.

High-Value Items ($100+)

• For items valued at $100 or more, customers must provide a return tracking number before a replacement will be shipped.

Affirm & Financing Orders

• Affirm or similar financing orders that are cancelled or returned in-store are subject to a 5% service charge. This covers the processing fee charged to us by the financing provider.
• The Affirm service charge does not apply to confirmed defective or warranty returns.