Brightwell Aquatics ForinBacter One - 250ml

Brightwell Aquatics ForinBacter One

Brightwell Aquatics FlorinBacter One is a complete tank starter bioculture for all freshwater shrimp, fish & planted aquaria.

FlorinBacter One is primarily designed to jump start the ammonia cycle in freshwater planted and shrimp aquariums and prevent "New Tank Syndrome." It will instantly create a biological filter in freshwater aquaria of all types and is particularly useful for freshwater shrimp and planted aquariums. It removes toxic ammonia and nitrite naturally through bacterial oxidation.

Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of microalgae and cyanobacteria; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants.

Overview of Brightwell ForinBacter One

• Copper free and shrimp safe.
• Suspension of non-pathogenic aerobic and anaerobic microbes, as well as natural enzymes, specifically formulated to establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification and denitrification.
• Specifically formulated for use in shrimp, planted and all freshwater aquaria.
• Particularly useful in freshwater aquaria with high population densities of shrimp or fish species.
• Benefits are:
  • Rapid reduction of ammonia, and nitrite.
  • Prevents "New Tank Syndrome."
  • Supplied in a state of suspended animation for maximum longevity.
  • Formulated utilizing extensive data compiled by microbiologists.

Instructions & Guidelines for using ForinBacter One from Brightwell Aquatics

Important: First, completely remove chloramines and chlorine from tap water. Chloramine and chlorine are lethal to the bacteria in this product and if not treated will cause it to fail!

Shake product well before using. Mix appropriate volume of ShrimpFlorinBacterONE (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense ShrimpFlorinBacterONE below water level of container or aquarium, be sure to thoroughly clean pipette with fresh (preferably purified) water prior to placing tube back into ShrimpBacterONE bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s), which can negatively impact the microbes present in ShrimpFlorinBacterONE. For best results, use within 1-year of purchase date.

To seed Biological Filtration in new aquaria: Preferably add 2 ml (1 pump if equipped with a pump, or 2 threads on cap) of ShrimpFlorinBacterONE per US-gallon of aquarium water. Minimum recommended dosage for new aquariums is 1 ml per US-gallon. Turn UV-sterilization and/or ozonation off for a period of one day following addition to aquaria.

To provide ongoing biological stability to the aquarium: Add 2 ml of ShrimpFlorinBacterONE per 10 US-gallons of aquarium water per week after initial setup, or switch to ShrimpFlorinBacter7. This will provide increased water clarity and contribute to the ongoing health and overall vigor of inhabitants. Always add this product during and after treatment of the aquarium with any antibiotic or other medication.

Storage: Although product can withstand room temperature for periods of time, for best longevity and highest potency, keep refrigerated at 50 degrees F. Do not freeze!